Espresso Machine
Quick Start Guide
Espresso machines are relatively complex appliances to use. Please read the full manual for comprehensive
instructions and safety advice before first use. This Quick Start Guide only contains basic information.
Fill the tank Preheat
Fill the tank with fresh tap Press the ON/OFF button to switch
water. It is removable, the machine on. Insert a filter into the
if you prefer to fill it under the tap. porta filter, fit the porta filter to the
group head and place a cup (or two)
underneath the espresso outlets.
NOTE: When the HEATING light turns off, turn the function dial to the position, let some hot
water flow into the cup(s) and then turn the dial back to the neutral position to switch off the pump.
Let the water heat the cups and discard it just before brewing coffee.
Add coffee Make espresso
Remove the porta filter, add Set the HOT WATER/STEAM selector to HOT WATER
coffee (1 measuring spoonful for 1 cup, (released), place the empty, warm cup(s) underneath
2 for 2 cups), press the coffee down the outlets and when the HEATING light turns off,
lightly with the tamp and fit the porta turn the function dial to the position.
filter to the group head. Turn the function dial back to the neutral position
when you have enough coffee in your cup(s).
Froth milk
Fill around 100mL of cold milk into the cold stainless steel jug.
Swing the steam wand to the side of the appliance and place
the milk jug underneath, with the nozzle just below the surface
of the milk. With the function dial set to the position,
move the jug round for around 40-45 seconds, making sure
the nozzle remains submerged. When the milk is textured to
your liking, turn the function dial back to the neutral position.
Model Number STR-ESPM
Colour Matte White
For more information
Warranty 3 Years
please visit www.stirlingappliances.com.au
or call 1300 886 649 Version QSG-V1.0