15 Test Equipment and Accessories / 7PA

7PA22/23/26/27/30
Auxiliary Relays for Various Applications
Technical data

Switching contacts
Continuous current 10 A
Overload capability 80 A/200 ms
150 A/10 ms
Switching current/voltage 40 A/0.5 s/110 V DC
Breaking capacity for 105 operating cycles
Non-inductive Inductive, 20 ms
1 contact 2 contacts 1 contact 2 contacts
in series in series
V DC A A A A
24 6.6 12.7 3.2 6.0
60 2.6 4.9 1.4 2.7
125 1.2 2.2 0.6 1.1

LSP2457-afp.tif
220 0.6 1.1 0.3 0.6

For details see characteristics

Vmax, open contact 250 V DC/400 V AC
Mechanical service life 107 operating cycles
Operating temperature - 10 °C to + 70 °C
Fig. 15/2 7PA2 auxiliary relays 14 °F to 158 °F
Max. permissible humidity 93 % at 40 °C/104 °F
Seismic stress class according to IEEE 501
Degree of ZPA 3 g acceleration at
Description 33 Hz

Due to their quality, reliability and design,

these relays are optimal for applications re-
quiring high reliability and availability
such as power stations, substations, railway
and industrial plants. Typical examples in-
clude petrochemical industry, chemical in-
dustry, cement industry, rolling mills etc.
The relays comply with the IEC, EN, IEEE
standards (type and routine test) and bear
the CE mark.
The robust switch contacts are character-
Standards
ized by high make/break capacity, overload
capability and continuous current intensity Electrical tests performed according to IEC 60255
- Insulation 2 kV/50 Hz/ 1 min
capacity; thus perfect insulation is obtain- - Impulse withstand 5 kV/1.2/50 µs
ed. Direct control of high-voltage and me- strength
dium-voltage switchgear is possible. - Dielectric strength > 2000 MΩ/
500 Vpeak-to-peak
Their high degree of protection and the Flammability tests according to IEC 60692-2-1
transparent cover ensure reliable operation Plastic materials UL 94: VO,
in tropical and/or salty sea air ambient IEC 60695: 850 °C/30 s
conditions. 1562 °F/30 s
Degree of protection Relay: IP 40
acc. to IEC 60529 With socket cover:
IP 50
Climatic stress test according to
- IEC 60255-7 Non-dissipating unit
dry heat +70 °C/96 h 158 °F/96 h
Dissipating unit
+55 °C/96 h 131 °F/96 h
- IEC 60068-2-30 +55 °C/12 h 15
cyclic humid heat 131 °F/12 h
- IEC 60068-2-1 100 cycles
cold Non-dissipating unit
-10 °C/2 h 14 °F/2 h
- IEC 60255-7 At rated voltage VN
thermal aging test +55 °C/1440 h
131 °F/1440 h

Siemens SIP · 2004 15/5

 15 Test Equipment and Accessories / 7PA

Technical data
7PA22
While the auxiliary voltage is being sup-
Fast-acting lockout relay plied to the SET coil, the reset pushbutton
Description must not remain pushed longer than 20 s.

The bistable 7PA22 is a fast-acting lockout Rated voltages and consumption

relay with eight changeover contacts and is VN Voltage range Consumption
plugged into a mounting frame equipped while switching
with a plug-in socket (type 7XP9010) with V DC V DC
screw-type terminals at the rear. 24 19 - 26
30 24 - 33
Functions
60 48 - 66 ≤ 48 W
No continuous power consumption. Posi-
110 88 - 121
tion indication on the front side. Mechani-
cal reset pushbutton. 125 100 - 137
Position memory with two positions ( e.g. 220 176 - 242
for yes/no, open/close, auto/manual, lo-
cal/remote etc.). • Pick-up time: < 10 ms
Fig. 15/3 Connection diagram
General description see page 15/5. Contacts represented in position RESET
Refer to part 16 for dimension drawings.

Selection and ordering data Description Order No.

7PA22 fast-acting lockout relay 7PA22o1-o

Auxiliary voltage
24 V DC 1
60 V DC 2
110 V DC 3
220 V DC 4
125 V DC 5
30 V DC 6

Socket
without socket 0
with flush-mounting socket 7XP9010-1 1

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9010-1
Surface mounting 7XP9012-0

15

15/6 Siemens SIP · 2004

 15 Test Equipment and Accessories / 7PA

Protection functions Technical data

While the auxiliary voltage is being sup-
7PA23 plied to the SET coil, the reset pushbutton
must not remain pushed longer than 20 s.
Fast-acting lockout relay Rated voltages and consumption
Description VN Voltage range Consumption
while switching
The bistable 7PA23 is a fast-acting lockout
relay with four changeover contacts and is V DC V DC
plugged into a mounting frame equipped 24 19 - 26
with a plug-in socket (type 7XP9011) with 30 24 - 33
screw-type terminals at the rear.
60 48 - 66 ≤ 24 W

Functions 110 88 - 121

125 100 - 137 Fig. 15/4 Connection diagram
No continuous power consumption. Posi-
tion indication on the front side. Mechani- 220 176 - 242 Contacts represented in position RESET
cal reset pushbutton. • Pick-up time: < 8 ms
Position memory with two positions General description see page 15/5.
(e.g. for yes/no, open/close, auto/manual, Refer to part 16 for dimension drawings.
local/remote etc.).

Selection and ordering data Description Order No.

7PA23 fast-acting lockout relay 7PA23o1-o

Auxiliary voltage
24 V DC 1
60 V DC 2
110 V DC 3
220 V DC 4
125 V DC 5
30 V DC 6

Socket
without socket 0
with flush-mounting socket 7XP9011-1 1

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9011-1
Surface mounting 7XP9013-0

15

Siemens SIP · 2004 15/7

 15 Test Equipment and Accessories / 7PA

7PA26 Monostable relay Technical data

Rated voltages and consumption
Description
VN Voltage Consumption
The monostable 7PA26 has eight change- range
over contacts and is plugged into a mount- V DC V DC
ing frame equipped with a plug-in socket
24/30 19 - 33 7PA26o1: ≤ 6 W
(type 7XP9010) with screw-type terminals Peak: ≤ 45 W
at the rear. 60 48 - 66
7PA26o0: ≤ 5 W
110/125 88 - 137
220 176 - 242

• Pick-up time: 7PA26o0 < 20 ms

7PA26o1 < 10 ms
• Drop-out time: < 40 ms
General description see page 15/5.
Refer to part 16 for dimension drawings.

Fig. 15/5 Connection diagram

Selection and ordering data Description Order No.

7PA26 monostable relay 7PA26oo-o

Auxiliary voltage
24 /30 V DC 1
60 V DC 2
110/125 V DC 3
220 V DC 4

Standard, 20 ms 0
Fast, 10 ms 1

Socket
without socket 0
with flush-mounting socket 7XP9010-0 1

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9010-0
Surface mounting 7XP9012-0

15

15/8 Siemens SIP · 2004

 15 Test Equipment and Accessories / 7PA

Technical data
7PA27 Monostable relay
Rated voltages and consumption
Description
VN Voltage Consumption
The monostable 7PA27 is a fast-acting relay range
with four changeover contacts and is V DC V DC
plugged into a mounting frame equipped
24/30 19 - 33 ≤ 3.5 W
with a plug-in socket (type 7XP9011) with Peak: ≤ 25 W
screw-type terminals at the rear. 60 48 - 66
110/125 88 - 137
220 176 - 242

• Pick-up time: < 8 ms

• Drop-out time: < 40 ms
Fig. 15/6 Connection diagram
General description see page 15/5.
Refer to part 16 for dimension drawings.

Selection and ordering data Description Order No.

7PA27 monostable fast-acting relay 7PA27o0 -o

Auxiliary voltage
24 /30 V DC 1
60 V DC 2
110/125 V DC 3
220 V DC 4

Socket
without socket 0
with flush-mounting socket 7XP9011-0 1

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9011-0
Surface mounting 7XP9013-0

15

Siemens SIP · 2004 15/9

 15 Test Equipment and Accessories / 7PA

7PA30
Trip circuit supervision
Description
The 7PA30 relay is equipped with green
LED and two changeover contacts. It is ap-
plied for trip circuit supervision in the open
and close position of the circuit-breaker. It
monitors the trip circuit, the trip coil and
the proper state of the fuses and mini cir-
cuit-breakers of the circuit.

Functions
The 7PA30 indicates a trip circuit failure
with a time delay of 150 ms.
The relay is always in an energized condi-
tion, regardless of the position of the cir-
cuit-breaker (open/close).
In the event of actuation of the relay, its
unassigned contacts can be used for:
– Blocking the circuit-breaker connection
– Issuing the trip command to another
c.-b. upstream or to a second trip coil of Fig. 15/7 Connection diagram
the same c.-b. Switching contacts shown without
– Local or remote signaling auxiliary power supply in the relay

Under normal operating conditions, the

7PA30 cannot issue spurious tripping be- Technical data Rated voltages and consumption
cause of the large resistance of its coil. In
the event of a short-circuit of the coil, the 7PA30 relays are applied only for trip cir- VN Voltage range Consumption
LED would melt and thus prevent un- cuits with a power consumption of > 30 W.
wanted operation of the circuit-breaker. V DC V DC
24 19 - 26
30 24 - 33
60 48 - 66 ≤ 2.4 W
110/125 88 - 137
220 176 - 242
General description see page 15/5.
Refer to part 16 for dimension drawings. • Drop-out time: < 18 ms

Selection and ordering data Description Order No.

7PA30 trip circuit supervision 7PA30o0-o

Auxiliary voltage
24 V DC 1
60 V DC 2
110 / 125 V DC 3
220 V DC 4
30 V DC 6

Socket
15 without socket 0
with flush-mounting socket 7XP9011-0 1

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9011-0
Surface mounting 7XP9013-0

15/10 Siemens SIP · 2004

 15 Test Equipment and Accessories / 7PA

Dimension drawings in mm / inch

Fig. 16/55 Fig. 16/56

7PA22, 7PA26 auxiliary relays 7PA23/27 auxiliary relay
7TS15 indication relay 7PA 30 trip circuit supervision

Fig. 16/57 Fig. 16/58

Flush mounting socket 7XP9010 Flush mounting socket 7XP9011
for 7PA22, 7PA26 auxiliary relays for 7PA23/27 auxiliary relay
7TS15 indication relay 7PA30 trip circuit supervision

Fig. 16/59 Fig. 16/60

7PA22, 7PA26 auxiliary relays Surface mounting socket 7XP9013
7TS15 indication relay for 7PA23/27 auxiliary relay
7PA30 trip circuit supervision
15

Siemens SIP · 2004 15/11