Scribd
Upload
76 views9 pages

Gizmo Accessdiver Tutorial

This document provides a tutorial on using the AccessDiver program to crack website passwords. It discusses getting the necessary tools like proxies and wordlists, how to import them and check proxies. It explains the various program settings and how to start the cracking process. Potential issues that could occur are also outlined, such as error codes indicating proxy problems. The tutorial stresses the illegality of cracking but provides information on how to do it successfully with AccessDiver.

Uploaded by

JIMISING
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views9 pages

Gizmo Accessdiver Tutorial

This document provides a tutorial on using the AccessDiver program to crack website passwords. It discusses getting the necessary tools like proxies and wordlists, how to import them and check proxies. It explains the various program settings and how to start the cracking process. Potential issues that could occur are also outlined, such as error codes indicating proxy problems. The tutorial stresses the illegality of cracking but provides information on how to do it successfully with AccessDiver.

Uploaded by

JIMISING
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

AccessDiver Tutorial

Table of Contents
1.0 Introduction
1.1 What you will need to Crack a site
1.2 What u are Getting yourself into when you are cracking a site
1.3 How to get the members Url
2.0 Proxies
2.1 Intoduction To proxies
2.2 How to Get Proxies
2.3 How To Check Proxies using AccessDiver
2.4 Proxy codes
2.5 Checking Proxies Anonymity Level (very importand)
3.0 Your wordlist
3.1 how to import
3.2 The types of wordlists
4.0 Settings
4.1 A look at the various settings in AccessDiver
5.0 Starting the Crack Engine
5.1 What’s Good
5.2 What’s Bad
6.0 Closing

1.0 This tutorial is just for informational purposes only. Any use of illegal activity is
prohibited. LOL what the hell do you think I am writing this tutorial for. This is for all
the people out there that don’t wanna pay for something that should be free. I will give
ya an in depth tutorial on how to do all the shit needed to crack a site successfully. Just
remember the better the site looks the harder it will probably be to crack it.
1.1 In order t crack a site you will need the following tools:

1: The AccessDiver program ( http://www.accessdiver.com)


2: A wordlist ( a combo wordlist and/or a username/password list)
3. A set of proxies ( these are available at lots of sites but you can go here to
get them also http://xxxcrackers.cjb.net )
4. And last but not least you will need the members url ( this is the URL that
you click on to get that PopUp that will ask you for the
username/password)
1.2 What you are about to do is illegal but I don’t see why. All you are doing is
trying usernames and passes till ya find one that works. But hey I don’t make the
laws. Be carefull in what you do. If you get caught or something like that don’t
blame me I warned you.
1.3 Ok First things first. Go to the site you want to crack. For
Ex.Http://www.angelhardcore.com
Then Right Click the members url and select the copy shortcut option.
Then the members url will be copied to the clip board so when ya go into
AccessDiver all ya got to do is click in the Field next to Server: and press CTL+V
And it will paste it in there. You will need the members URL for everything so
refer back to this section if ya need help.

2.0 Proxies

2.1 Introduction to Proxies


Well in short a Proxy is a server or computer that you connect to and then through
them you connect or view pages to the internet. That is it in a nutshell. And you
are asking why you need proxies to crack. Well when you are actuall at the site if
ya don’t use a proxy they can get your internet disconnected by contacting the isp
and telling them that you are trying to crack their site and the isp will disconnect
your service. That is why you use proxies. To safe guard yourself and save your
internet. Also some sites will bann certain IP addresses From accessing the site
so if ya using the proxy then you with your own IP address can view the site
normally with out the proxy server.

2.2 How to get Proxies


The easiest way to get proxies it to leech them. Most proxy addresses are in the
format xxx.xxx.xxx.xxx:80 ( xxx.xxx.xxx.xxx is the ip address and 80 is the port
number. To import them into just about any prog you need them in that format.
You can go to http://xxxcrackers.cjb.net and just copy and paste them into
notepad and then save it. There are plenty of other sites that have proxies but you
need to find them. Forums are also good to find them also.

2.3 How to Check Proxies using AccessDiver


First you got to Open AccessDiver . This is what it should look like when ya first
open it up.Then ya wanna go to My Skill> expert mode and that will show all the
options
1. Then ya wanna click on the Proxy Tab
2. Then Click on the Proxy Analyzer Tab
3. Then ya wanna click on the import button to the left of the blue disk
4. then you remember how to get the members url well paste it into the
server field up at the top of the screen.
5. Click on the special tab on the bottom of the screen. Then make sure that
the radio button next to the url is password protected test is checked.
6. then Make sure that all of your proxies are now selected: do this by click
on the first proxy and then hold shift and click on the last proxy. Then you
wanna click on the button labled speed/accuracy tester.
7. Then when that process is finished you want to click on the confidentially
tester. It uses a proxyjudge to check the proxy for anonymity ( a proxy
judge is a cgi script that will checka proxy using parameters to see how
anonymous it is. To add or delete them click on the proxyjudge settings
tab.

using this method is the easiest and best way to prevent fakes. Feel free to test out other
methods.
2.4 The proxy codes

Well there are many different codes. Here they are.


200 – means that the site was accessed ok ( don’t want
300 – is a certain server error ( don’t want that
400 – there are many 400 errors mainly you will get one of 3
401 – access denied
403 - forbidden
404 – not found
500 - server connection error

when using the method below you are testing the proxy to see if it will be able to
access a specific site to see if the proxy can access it. That is the best way to
prevent fakes

2.5 Checking proxies anonymity level

When you click on the confidentiality tester button you will notice that connecting
will appear in the anonymous column instead the delay column. What this does is
access the proxy judge and sees how anonymous the proxy is by doing tests.
The best one to use is level 1 that is the most anonymous and the worst is level 5
Now you might see that some proxies are gateways. These are also not good to
use. The best ones to use are a combo of the most secure and the fastest. A
secure slow proxy is also good also. I use only level 1,2 3 proxies. For my
security

3.0 Your wordlist

Your wordlist is a list of words or combo of words that will be used as logins and
passes to try when you start the cracking engine.AccessDiver comes with a generic
wordlist but you can also get more from http://xxxcrackers.cjb.net if ya want more to
add to it

3.1 How to import your wordlist

Just follow these steps:


1. click on the Dictionary tab
2. then click on load combo list
3. then select the list

it is as easy as that. Here is a pic just for help.

If you have just the username and the passwords in 2 separate files just click on the
corresponding folder buttons in each column and load the list 1 at a time
4.0 Settings

Well depending on the type of site you are cracking is what kind of settings you use.
There are several different screens that you will use to configure the settings. First
off are the number of bots to use.

this slider bar right there will decide what speed you want to crack at. Depending on
what site you crack if you go to fast you will kill all your proxies quick depending on
security of the site. How fast you go is your choice

Next is the Proxy settings you can choose to rotate the proxies whether to change on a
fake reply and so on. What you check and uncheck is highly up to you

there are many other settings but they are not as important.

5.0 Now on to starting the crack engine

To start on the crack engine you just click on the lightning bolt to the left of the
server field. And the screen should change and look like this.
That is when you know it is working. If there is a found logon there will be a l:p in the
big yellow square twards the bottom.
5.1 What’s Good

Well while the crack engine is going you will see error codes and the combos that are
being tested. The error code should be 401 that mean it is testing properly. If ya see a
200 and you don’t have a found logon then that proxy is no good.

5.2 What’s Bad

If you get detecting a fake reply you need to slow down. If you get a bot time out that
proxy maybe bad , if you get a 403 error that means you need to delete this proxy cuz it is
forbidden from accessing that site. If you get a 302 or 500 they are proxy errors and the
proxies need to be deleted from your list.

Accessdiver: is one of the best tools to crack with for newbies. There are other cracking
progs out there like ares and GoldenEye and others.

Related links: http://astalavista.box.sk


http://xxxcrackers.cjb.net
http://www.securityadvise.de/deny/phpBB2/index.php

You might also like