Scribd
Upload
1K views2 pages

ASME Pressure Vessel Head Types

The document discusses three main types of pressure vessel heads according to the ASME code: ellipsoidal heads, hemispherical heads, and torispherical heads. It provides characteristics and dimensional features of each type, such as their thickness relative to the shell thickness and dimensional ratios. The document also discusses inspecting the dimensions of pressure vessel heads and joint efficiencies for welded versus seamless heads.

Uploaded by

Ariq Fauzan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views2 pages

ASME Pressure Vessel Head Types

The document discusses three main types of pressure vessel heads according to the ASME code: ellipsoidal heads, hemispherical heads, and torispherical heads. It provides characteristics and dimensional features of each type, such as their thickness relative to the shell thickness and dimensional ratios. The document also discusses inspecting the dimensions of pressure vessel heads and joint efficiencies for welded versus seamless heads.

Uploaded by

Ariq Fauzan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
  • Pressure Vessel Heads: Provides information about different types of ASME heads, their uses, and important dimensional features.

Pressure Vessel Heads

The Pressure Vessel Heads article provides you with information about different types of
ASME heads and related points in pressure vessel inspection.

How many standard Pressure Vessel Heads are in the ASME Code? What are their
characteristics?

This article introduces you, different type of Heads, applications and dimensional features.

The Ellipsoidal Head, Hemispherical Head and Torispherical Head are three types of ASME
Pressure Vessel Dished Heads.

See the following Fig. for these heads sketches:

Ellipsoidal Head Dimensional Characteristics:

In the same design condition, such as design pressure, design temperature and material,
your calculated wall thickness under internal pressure will be approximately equal to shell
thickness.

For example if you have calculated your shell thickness under internal pressure and
obtained 12 mm, your ellipsoidal head thickness also will be approximately 12 mm.

The inside depth of your ellipsoidal head (h in above fig.) will be one-fourth of the head
inside diameter (h = D/4).

Your ellipsoidal head knuckle radius is 0.17D and the spherical radius is 0.9D.

Torispherical Head Dimensional Characteristics:

In the same design conditions within the same design pressure, design temperature and
material, your calculated wall thickness under internal pressure will be approximately equal
to 1.77 times the shell thickness.
For example, if you have calculated your shell thickness under internal pressure and
obtained 12 mm, your torispherical head thickness will be approximately 21.24mm.

Your torispherical head knuckle radius is 6% of the inside crown radius, and your crown
radius is equal to outside the diameter of the head skirt.

Hemispherical Head Dimensional Characteristics:

With the same same design conditions with the same design pressure, design temperature
and material, your calculated wall thickness under internal pressure will be approximately
half of the shell thickness.

For example, if you have calculated your shell thickness under internal pressure and
obtained 12 mm, your hemispherical head thickness also will be approximately 6 mm.

The inside depth of your hemispherical head will be one-half of head inside diameter (h =
D/2).

Dimensional Inspection of Pressure Vessel Dished Heads

You need to make a dimensional inspection on the pressure vessel heads for any effort for
the fit-up process. The dimensional inspection is done on the knuckle radius, crown radius,
skirt length, depth and thickness.

Review the Pressure Vessel Dimensional Inspection Article for a detailed description for
heads inspection.

Pressure Vessel Dished Head Joint Efficiencies:

If your dished head is welded and the joint efficiency is 1, then all of your head welds need
full length radiography.

If your dished head is seamless and your joint efficiency is 1, your head to shell needs full
radiography and spot radiography for your ellipsoidal or torispherical heads.

For a more detailed description, please review the ASME Pressure Vessel Joint Efficiencies
article.

Pressure Vessel Heads The Pressure Vessel Heads article provides you with information about different types of ASME heads an
For example, if you have calculated your shell thickness under internal pressure and obtained 12 mm, your torispherical head

You might also like