Scribd
Upload
108 views4 pages

Port Trace

The document describes the logging output of a firmware update tool called fh_loader.exe. It shows: 1) The command used to run fh_loader including command line arguments. 2) Logs from fh_loader initializing and sending configuration commands to the target device, including the device acknowledging the commands. 3) Logs from fh_loader sending a reset command to the target device and the device acknowledging it.

Uploaded by

Advan i5e
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
108 views4 pages

Port Trace

The document describes the logging output of a firmware update tool called fh_loader.exe. It shows: 1) The command used to run fh_loader including command line arguments. 2) Logs from fh_loader initializing and sending configuration commands to the target device, including the device acknowledging the commands. 3) Logs from fh_loader sending a reset command to the target device and the device acknowledging it.

Uploaded by

Advan i5e
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

18:34:49: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS

************************************************
C:\NewFOTA\QFlash_tool_F320B\QFLASH-F320B\fh_loader.exe --port=\\.\COM1106 --reset
--noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************

18:34:49: DEBUG: Binary build date: May 9 2017 @ 03:56:18

18:34:49: DEBUG: Build Version: 17.05. 9.03.56.18

18:34:49: INFO: Current working dir (cwd): C:\NewFOTA\QFlash_tool_F320B\QFLASH-


F320B\
18:34:49: INFO: Showing network mappings to allow debugging
18:34:50: DEBUG: New connections will not be remembered.

18:34:50: DEBUG:

18:34:50: DEBUG:

18:34:50: DEBUG: Status Local Remote Network

18:34:50: DEBUG:

18:34:50: DEBUG:
-------------------------------------------------------------------------------

18:34:50: DEBUG: Unavailable X: \\Sidc1isln03\newretail\PRIVATE\DASS_REFURB

18:34:50: DEBUG: Microsoft Windows


Network

18:34:50: DEBUG: Unavailable Y:


\\SIDC1ISLN03\JIO_RJILFS\PRIVATE\DEVICE_CARE_SUPPORT

18:34:50: DEBUG: Microsoft Windows


Network

18:34:50: DEBUG: Unavailable Z:


\\SIDC1ISLN03\JIO_RJILFS\PRIVATE\DASS_TOOLS_SOFTWARE

18:34:50: DEBUG: Microsoft Windows


Network

18:34:50: DEBUG: The command completed successfully.

18:34:50: DEBUG:

18:34:50: DEBUG: User set ZLPAWAREHOST to 1

18:34:50: INFO: User wants to talk to port '\\.\COM1106'


18:34:50: DEBUG: port_fd=0x258

18:34:50: INFO: Took 0.00000000 seconds to open port


18:34:50: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others,
<patch>,<power>
18:34:50: INFO: If you don't want this, use --dontsorttags
18:34:50: INFO: Sending <configure>
18:34:50: DEBUG: CHANNEL DATA (P0000) (H00202) ( 228 bytes) - HOST TO TARGET -->
===================================================================================
========================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="emmc" Verbose="0" AlwaysValidate="0"
MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576"
ZlpAwareHost="1" SkipStorageInit="0" />
</data>

===================================================================================
=========================

18:34:50: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes


18:34:50: DEBUG: CHANNEL DATA (400 bytes) <-- TARGET to HOST
18:34:50: DEBUG: CharsInBuffer = 400
18:34:50: DEBUG: printBuffer:5374 PRETTYPRINT Buffer is 400 bytes

18:34:50: DEBUG: printBuffer:5451 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31


<?xml version="1
18:34:50: DEBUG: printBuffer:5451 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .
0" encoding="UT
18:34:50: DEBUG: printBuffer:5451 46 2D 38 22 20 3F 3E 3C 64 61 74 61 3E 3C 6C 6F
F-8" ?><data><lo
18:34:50: DEBUG: printBuffer:5451 67 20 76 61 6C 75 65 3D 22 6C 6F 67 62 75 66 40 g
value="logbuf@
18:34:50: DEBUG: printBuffer:5451 30 78 30 38 30 35 37 45 44 38 20 66 68 40 30 78
0x08057ED8 fh@0x
18:34:50: DEBUG: printBuffer:5451 30 38 30 35 34 44 34 30 22 20 2F 3E 3C 2F 64 61
08054D40" /></da
18:34:50: DEBUG: printBuffer:5451 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E
ta><?xml version
18:34:50: DEBUG: printBuffer:5451 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D
="1.0" encoding=
18:34:50: DEBUG: printBuffer:5451 22 55 54 46 2D 38 22 20 3F 3E 3C 64 61 74 61 3E
"UTF-8" ?><data>
18:34:50: DEBUG: printBuffer:5451 3C 72 65 73 70 6F 6E 73 65 20 76 61 6C 75 65 3D
<response value=
18:34:50: DEBUG: printBuffer:5451 22 41 43 4B 22 20 4D 69 6E 56 65 72 73 69 6F 6E
"ACK" MinVersion
18:34:50: DEBUG: printBuffer:5451 53 75 70 70 6F 72 74 65 64 3D 22 31 22 20 4D 65
Supported="1" Me
18:34:50: DEBUG: printBuffer:5451 6D 6F 72 79 4E 61 6D 65 3D 22 65 4D 4D 43 22 20
moryName="eMMC"
18:34:50: DEBUG: printBuffer:5451 4D 61 78 50 61 79 6C 6F 61 64 53 69 7A 65 46 72
MaxPayloadSizeFr
18:34:50: DEBUG: printBuffer:5451 6F 6D 54 61 72 67 65 74 49 6E 42 79 74 65 73 3D
omTargetInBytes=
18:34:50: DEBUG: printBuffer:5451 22 34 30 39 36 22 20 4D 61 78 50 61 79 6C 6F 61
"4096" MaxPayloa
18:34:50: DEBUG: printBuffer:5451 64 53 69 7A 65 54 6F 54 61 72 67 65 74 49 6E 42
dSizeToTargetInB
18:34:50: DEBUG: printBuffer:5451 79 74 65 73 3D 22 31 30 34 38 35 37 36 22 20 4D
ytes="1048576" M
18:34:50: DEBUG: printBuffer:5451 61 78 50 61 79 6C 6F 61 64 53 69 7A 65 54 6F 54
axPayloadSizeToT
18:34:50: DEBUG: printBuffer:5451 61 72 67 65 74 49 6E 42 79 74 65 73 53 75 70 70
argetInBytesSupp
18:34:50: DEBUG: printBuffer:5451 6F 72 74 65 64 3D 22 31 30 34 38 35 37 36 22 20
orted="1048576"
18:34:50: DEBUG: printBuffer:5451 4D 61 78 58 4D 4C 53 69 7A 65 49 6E 42 79 74 65
MaxXMLSizeInByte
18:34:50: DEBUG: printBuffer:5451 73 3D 22 34 30 39 36 22 20 56 65 72 73 69 6F 6E
s="4096" Version
18:34:50: DEBUG: printBuffer:5451 3D 22 31 22 20 54 61 72 67 65 74 4E 61 6D 65 3D
="1" TargetName=
18:34:50: DEBUG: printBuffer:5451 22 38 39 30 39 22 20 2F 3E 3C 2F 64 61 74 61 3E
"8909" /></data>
18:34:50: DEBUG: printBuffer:5464

18:34:50: DEBUG: XML FILE (99 bytes): CharsInBuffer=400-99=301


-----------------------------------------------------------------------------------
--------
<?xml version="1.0" encoding="UTF-8" ?><data><log value="logbuf@0x08057ED8
fh@0x08054D40" /></data>
-----------------------------------------------------------------------------------
--------

18:34:50: INFO: TARGET SAID: 'logbuf@0x08057ED8 fh@0x08054D40'


18:34:50: DEBUG: XML FILE (301 bytes): CharsInBuffer=301-301=0
-----------------------------------------------------------------------------------
--------
<?xml version="1.0" encoding="UTF-8" ?><data><response value="ACK"
MinVersionSupported="1" MemoryName="eMMC" MaxPayloadSizeFromTargetInBytes="4096"
MaxPayloadSizeToTargetInBytes="1048576"
MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096"
Version="1" TargetName="8909" /></data>
-----------------------------------------------------------------------------------
--------

18:34:50: DEBUG: Response was 'ACK'


18:34:50: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
18:34:50: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
18:34:50: DEBUG: Got the ACK for the <configure>
18:34:50: INFO: Sending <power>
18:34:50: DEBUG: CHANNEL DATA (P0001) (H00203) ( 99 bytes) - HOST TO TARGET -->
===================================================================================
========================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<power DelayInSeconds="10" value="reset" />
</data>

===================================================================================
=========================

18:34:50: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes


18:34:50: DEBUG: CHANNEL DATA (76 bytes) <-- TARGET to HOST
18:34:50: DEBUG: CharsInBuffer = 76
18:34:50: DEBUG: printBuffer:5374 PRETTYPRINT Buffer is 76 bytes

18:34:50: DEBUG: printBuffer:5451 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31


<?xml version="1
18:34:50: DEBUG: printBuffer:5451 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .
0" encoding="UT
18:34:50: DEBUG: printBuffer:5451 46 2D 38 22 20 3F 3E 3C 64 61 74 61 3E 3C 72 65
F-8" ?><data><re
18:34:50: DEBUG: printBuffer:5451 73 70 6F 6E 73 65 20 76 61 6C 75 65 3D 22 41 43
sponse value="AC
18:34:50: DEBUG: printBuffer:5451 4B 22 20 2F 3E 3C 2F 64 61 74 61 3E
K" /></data>
18:34:50: DEBUG: printBuffer:5464

18:34:50: DEBUG: XML FILE (76 bytes): CharsInBuffer=76-76=0


-----------------------------------------------------------------------------------
--------
<?xml version="1.0" encoding="UTF-8" ?><data><response value="ACK" /></data>
-----------------------------------------------------------------------------------
--------

18:34:50: DEBUG: Response was 'ACK'


18:34:50: DEBUG: Got the ACK
18:34:50: INFO: ==============================================================
18:34:50: INFO: Files used and their paths
18:34:50: INFO: 1 'C:\NewFOTA\QFlash_tool_F320B\QFLASH-F320B\port_trace.txt'
18:34:50: INFO: _ (done)
18:34:50: INFO: | |
18:34:50: INFO: __| | ___ _ __ ___
18:34:50: INFO: / _` |/ _ \| '_ \ / _ \
18:34:50: INFO: | (_| | (_) | | | | __/
18:34:50: INFO: \__,_|\___/|_| |_|\___|
18:34:50: INFO: {All Finished Successfully}

18:34:50: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) ---
Overall to target 0.047 seconds (0.00 Bps)

You might also like