Scribd
Upload
360 views1 page

Metal Detectors: Amplifier For Detector Coils

This document provides specifications for three metal detector amplifier models - MDV 3172 WR2, MDV 3172 WR1, and MDV 3172 GR. It lists the supply voltage, current consumption, output relay specifications, ambient temperature range, protection class, housing material, and connection details for each model. An additional note provides information on the amplifier's NO-function and contact activation during metal detection.

Uploaded by

Jean Valjean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
360 views1 page

Metal Detectors: Amplifier For Detector Coils

This document provides specifications for three metal detector amplifier models - MDV 3172 WR2, MDV 3172 WR1, and MDV 3172 GR. It lists the supply voltage, current consumption, output relay specifications, ambient temperature range, protection class, housing material, and connection details for each model. An additional note provides information on the amplifier's NO-function and contact activation during metal detection.

Uploaded by

Jean Valjean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

METAL DETECTORS

Amplifier for detector coils

Series MDV

Automatic regulation adaption


Waterproof IP 67
For detector coil with cable plug
Sensivity potentiometer

Design MDV 3172


100

Dimensions 90

LED
Pot
170
177

LED

ID-No. P81010 P81017 P81011


Type MDV 3172 WR2 MDV 3172 WR1 MDV 3172 GR
Supply voltage [V] 230 AC ±10% 115 AC ±10% 24 DC ±10%
Current consumption [mA] <20 <60 <100
Output relay / change over contact
Switching voltage [V] 250 AC / 220 DC
Switching current [A] 1 AC / 2 DC
Switching power [VA] 125 VA / 60 W
Ambient temperature [°C] -25...+70
EMC class A
Protection [EN 60529] IP 67
Display LED array
Housing material PVC
Connection 2 m PVC cable 7 x 0.5 mm2

Note:
The amplifier MDV 3172 has
a NO-function. During metal
(1)
detection, the relay is MDV L1(+)
activated and contact 4-5
is closed (2-5 is open). (2)
After switch-on, the contact (5)
5-4 is closed for 2 seconds. (4)
This can be used for testing
purposes. (3)
N (–)

Accessories Central screw M 16x1 (Z00105) is part of delivery

8.04 EE81006 EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com

You might also like