Andrew Yeung
CHEM636
2011-01-31
History
First described by
Chance (1940) and
Gibson & Milnes (1964),
with a view to probing
enzyme kinetics
Oscilloscopes were the
first detectors
Chance, B. J.Franklin Inst. 1940, 229, 613.
Gibson, Q. H.; Milnes, L. Biochem. J. 1964, 91, 161.
Overview
Stopped flow is a type of flow- Dead time – the time
injection analysis between the end of
mixing and the start of
Reactants are rapidly mixed in a measurement Typically
mixing chamber, and the flow is ms range
stopped with the reactant stream in Measured electronically
Shorter is better
the flow cell (detector – usually some
form of photometry)
Allows
better measurement sensitivity due to
increased residence time
reduced fluid dispersion by stopping
flow
Scope
Other developments
Small sample volumes Wide temperature ranges
(< 0.7 to 500 μL) (e.g. +100 to -100 °C)
Fast analysis (3 to 60 s) High pressure (2 kbar)
t1/2 of 1-10 seconds possible measurements of activation
volume
Sensitivity depends on
detector Stopped flow with fast scan
Able to tolerate corrosive spectroscopy or with a
compounds (e.g. Br2, H2SO4) temperature jump
determine transient reaction
Many instruments
intermediates
commercially available
Gomez-Hens, A.; Perez-Bendito, D. Anal. Chim. Acta 1991, 242, 147.
Applications
Enzymes
Protein folding
Redox reactions
Coordination chemistry
Catalysis (e.g. polymerization reactions)
Typical Instrument
An example of a mixer
Mottola, H. A. Kinetic aspects of analytical chemistry; Wiley: New York, 1988; pp 172-178.
Schematics
Drive ratio can be
conveniently varied
(Harvey).
Mottola, H. A. Kinetic aspects of analytical chemistry; Wiley: New York, 1988; pp 172-178.
Harvey, R. A.; Borcherdt, W. O. Anal. Chem. 1972, 44, 1926.
Detectors
Usually photometric detectors
UV/Vis & IR
Fluorescence (more sensitive)
Chemiluminescence
Circular dichroism (good for protein work)
Refractive index
NMR* (e.g. 1H, 19F)
EPR
Voltammetry
Electrical conductivity
Stopped Flow NMR
NMR is the most information-rich type of
spectroscopy
Hand-mixing of reagents – useful to get data points
within tens of seconds
Stopped flow is useful to get data points within 2-
10 s
Main delay in this technique is the spin-lattice
relaxation time, T1
Reduced by addition of a relaxation agent, e.g.
Cr(acac)3, but causes line broadening
Apparatus not commercially available yet
Christianson, M. D.; Tan, E. H. P.; Landis, C. R. J. Am. Chem. Soc. 2010, 132, 11461.
Green, D. B.; Lane, J.; Wing, R. Appl. Spectrosc. 1987, 41, 847.
Probing Ligand Substitutions
Cl k2 Cl k1
2- - Cl
+ Cl Pd Cl
r.d.s.
Pd Cl Pd
Cl Cl Cl
Cl
Pd 1,5-COD
Cl
Green, D. B.; Lane, J.; Wing, R. Appl. Spectrosc. 1987, 41, 847.
Further reading: Christianson, M. D.; Landis, C. R. Concepts Magn. Reson., Part A 2007,
30A, 165.
Studying the Mechanism of
Catalytic Polymerization
Landis et al. studied the Zr-catalyzed
polymerization of 1-hexene CH3
Zr
Commercial NMR flow probe modified
CH 3B(C 6F 5)3
to give mixing chamber & related
stopped flow apparatus
Three reagent concentrations varied: 1-
hexene, and 2 catalyst precursors (rac-
(C2H4(1-indenyl)2)ZrMe2 & B(C6F5)3)
Multiple “shots” used to sample the
course of each reaction for every set of
parameters
Christianson, M. D.; Tan, E. H. P.; Landis, C. R. J. Am. Chem. Soc. 2010, 132, 11461.
Data
Resting catalyst
Zr pre-catalyst
Active catalyst
Christianson, M. D.; Tan, E. H. P.; Landis, C. R. J. Am. Chem. Soc. 2010, 132, 11461.
Analysis
Chain Re-
Initiation Propagation Transfer initiation
entry ki/M−1 s−1 kp/M−1 s−1 kt/s−1 kr/M−1 s−1
1a 0.224(2) 13.2(1) 0.0317(4) 2.70(7)
2a 0.218(2) 18.6(2) 0.0345(4) 4.12(6)
3a 0.255(1) 18.3(1) 0.0303(3) 2.56(3)
4a 0.222(3) 17.8(2) 0.0264(5) 1.62(5)
5a 0.314(3) 21.8(2) 0.0369(6) 2.33(7)
6a 0.215(2) 15.2(1) 0.0339(4) 1.80(3)
global fit (COPASI) 0.2353(6) 16.83(6) 0.0323(2) 2.06(2)
Rapid Quenched Flow (25 °C) 0.25 8.1 0.0132 >10kp
Rapid Quenched Flow (0 °C) 0.033 2.2 0.00066 >10kp
Kinetic Modelling 0.031 3.7 0.0024 103kp
Christianson, M. D.; Tan, E. H. P.; Landis, C. R. J. Am. Chem. Soc. 2010, 132, 11461.
Catalytic Pathway
Re-initiation of hydridoborate (6), originally thought
to be fast, found to be very slow
43 % of catalyst (3) inactive
Christianson, M. D.; Tan, E. H. P.; Landis, C. R. J. Am. Chem. Soc. 2010, 132, 11461.
Data
Resting catalyst
Zr pre-catalyst
Active catalyst
Christianson, M. D.; Tan, E. H. P.; Landis, C. R. J. Am. Chem. Soc. 2010, 132, 11461.
