Scribd
Upload
343 views1 page

BÖHLER Alform® 960-IG: Standard Designations EN ISO 16834-A AWS A5.28

The document provides information about BÖHLER alform® 960-IG solid wire, which is a high-strength, medium-alloyed solid wire electrode for inert gas welding of tempered and tempered glass thermomechanically treated fine grain steels. It lists the standard designations, properties and applications, base metals, direct analysis, and mechanical quality values of the weld metal.

Uploaded by

JORAM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
343 views1 page

BÖHLER Alform® 960-IG: Standard Designations EN ISO 16834-A AWS A5.28

The document provides information about BÖHLER alform® 960-IG solid wire, which is a high-strength, medium-alloyed solid wire electrode for inert gas welding of tempered and tempered glass thermomechanically treated fine grain steels. It lists the standard designations, properties and applications, base metals, direct analysis, and mechanical quality values of the weld metal.

Uploaded by

JORAM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BÖHLER alform® 960-IG

Solid wire, high strength

Standard Designations
EN ISO 16834-A AWS A5.28
G 89 5 M21 Mn4Ni2,5CrMo ER120S-G
Properties and applications
High-strength, medium-alloyed solid wire electrode for inert gas welding of tempered and
tempered glass thermomechanically treated fine grain steels.
The wire achieves optimized and tested welding results with the corresponding steel alform®
960 x-treme. Excellent toughness of the weld metal at low temperatures. Quality
Cold-resistance due to high degree of purity of the wire surface. Varied application in crane and
vehicle construction
Base metals
S960 and higher firmer materials, thermomechanically treated fine grain structural
steels adapted to alform® 960 x-treme
Direct analysis of the solid wire (% by weight)
C Si Mn Cr Ni Mo
wt-% 0,12 0,80 1,90 0,45 2,35 0,55
Mechanical quality values ​of the weld metal
State Yield Tensile Elongated Imapct strength
strengthRp0. strenght Rm A(L0=5d0) ISO-V KV J
2
MPa MPa % +20°C -50°C
u according EN ISO ≥ 930 ≥ 980 14 ≥ 47
u untreated, welding condition – inert gas Ar + 15 – 25% CO2
Processing Instructions
Current Shielding gas: ø (mm)
Type Argon + 15 – 25% CO2 1,0
DC ( + ) 1,2

Adjust preheating and interpass temperature to base material.

Sämtliche angegebenen Informationen basieren auf sorgfältiger Ermittlung und umfangreichen Recherchen. Wir über- 03/2014
nehmen jedoch keine Gewährleistung und Haftung für die Richtigkeit der Angaben und Änderungen sind vorbehalten. www.voestalpine.com/welding

You might also like