NAME OF WORK :-

BARBENDING SCHEDULE OF ELSR OF 15 LAKH CAPACITY, 12 M STAGING AT 0.395 0.62 0.89 1.58 2.47 3.85 6.32

Diamensions of Member Weights od Steel in Diameter wise

Sl. Dia in Spacing Cutting
Particulars No's
No mm in mt Length in Mt
No L B D 8 10 12 16 20 25 32

FOUNDATION RAFT

Circumferentially Bottom Bars 1 37.63 6.75 1.35 16 0.15 46 37.83 0.00 0.00 0.00 2749.15 0.00 0.00 0.00

1 Radially Bottom Bars 1 37.63 6.75 1.35 20 0.125 302 6.95 0.00 0.00 0.00 0.00 5184.34 0.00 0.00

Circumferentially Bottom Bars 1 37.63 6.75 1.35 10 0.2 35 37.83 0.00 814.95 0.00 0.00 0.00 0.00 0.00

Radially Top Bars 1 37.63 6.75 1.35 10.00 0.2 189 8.45 0.00 990.84 0.00 0.00 0.00 0.00 0.00

Centre Rectangular Portion 0.00 0.00 0.00 0.00 0.00 0.00 0.00

Main Bars Top & Bottom (4+4)=8 1 37.63 0.75 1.5 20 8 37.93 0.00 0.00 0.00 0.00 749.41 0.00 0.00

Main Bars Both side upto 1.50Mtr. (5+5)=10 1 37.63 0.75 1.5 12 10 37.93 0.00 0.00 337.54 0.00 0.00 0.00 0.00
2
Main Bars Both side From 1.50Mtr. To 2.00Mtr.
1 37.63 0.75 1.5 12 4 37.93 0.00 0.00 135.01 0.00 0.00 0.00 0.00
(2+2)=4

Stirrups 1 37.63 0.75 1.50 10 0.2 189 4.55 0.00 533.53 0.00 0.00 0.00 0.00 0.00

Stirrups 1 37.63 0.45 2.00 10 0.2 189 4.95 0.00 580.43 0.00 0.00 0.00 0.00 0.00

Central Shaft upto 11.00Mtr + Below GL 0.00 0.00 0.00 0.00 0.00 0.00 0.00

3 Vertical main Bar inner & Outer side 1 37.63 0.225 11.00 10 0.17 445 14.05 0.00 3873.37 0.00 0.00 0.00 0.00 0.00

Horizantal Bars inner & Outer side 1 37.63 0.225 11.00 10 0.17 131 37.93 0.00 3089.99 0.00 0.00 0.00 0.00 0.00

Bottom Ring Beam 0.00 0.00 0.00 0.00 0.00 0.00 0.00

Main Bar Top & Bottom 1 37.63 0.65 1.00 20 10 38.38 0.00 0.00 0.00 0.00 947.87 0.00 0.00
4
Face Bars on Each Side 1 37.63 0.65 1.00 10 6 38.38 0.00 142.76 0.00 0.00 0.00 0.00 0.00

4 legged Stirups 1 37.63 0.65 1.00 10 0.10 755 3.13 0.00 1461.86 0.00 0.00 0.00 0.00 0.00

Platform Beam 0.00 0.00 0.00 0.00 0.00 0.00 0.00

Main Bars @ Top 1 4.10 0.65 1.00 25 3 5.60 0.00 0.00 0.00 0.00 0.00 64.68 0.00

5 Main Bars @ Bottom 1 4.10 0.65 1.00 12 3 5.60 0.00 0.00 14.95 0.00 0.00 0.00 0.00

Face Bars on Each Side (2+2)=4 1 4.10 0.65 1.00 10 4

Stirrups 1 4.10 0.65 1.00 8 0.150 28 3.35 37.49 0.00 0.00 0.00 0.00 0.00 0.00

Platform Slab 0.00 0.00 0.00 0.00 0.00 0.00 0.00

6 Main Bars 1 4.10 1.40 0.12 10 0.2 22 1.70 0.00 22.66 0.00 0.00 0.00 0.00 0.00

Distribution 1 4.10 1.40 0.12 8 0.2 5 4.10 7.69 0.00 0.00 0.00 0.00 0.00 0.00
BARBENDING SCHEDULE OF ELSR OF 15 LAKH CAPACITY, 12 M STAGING AT 0.395 0.62 0.89 1.58 2.47 3.85 6.32

Diamensions of Member Weights od Steel in Diameter wise

Sl. Dia in Spacing Cutting
Particulars No's
No mm in mt Length in Mt
No L B D 8 10 12 16 20 25 32

Bottom Dome 0.00 0.00 0.00 0.00 0.00 0.00 0.00

Top & Bottom Radially Bars 2 3.14 12.08 1.68 0.15 10 0.175 109 7.06 0.00 952.10 0.00 0.00 0.00 0.00 0.00
7
Top & Bottom Radially Bars 2 3.14 12.08 1.68 0.15 10.00 0.175 105 5.00 0.00 651.84 0.00 0.00 0.00 0.00 0.00

Circumferentially Top & Bottom Bars 2 3.14 12.08 1.68 0.15 10 0.175 76 21.55 0.00 2033.93 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00

8 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00

Diameter wise STEEL QUANTITY IN KGS = 45.18 15148.24 487.50 2749.15 6881.63 64.68 0.00

TOTAL STEEL QUANTITY IN KGS = 25376.39

IN QTL 253.76

GRAND TOTAL STEEL QUANTITY IN Qtl = 253.76

 NAME OF WORK :- Proposed Construction of ELSR of 15 lakh litres capacity at WTP,Yadgir

ABSTRACT
Sl. Estimated cost
Description Estimated cost
No (in lakhs)

I CONSTRUCTION OF ELEVATED STORAGE RESERVOIRS

Estimate -Construction of ELSR of Capacity 15lakh liters

A #REF! #REF!
15mtr Staging at WTP,Yadgir

Total = #REF! #REF!

Roundoff= #REF! #REF!

Design Engineer Team Leader

STEM consultants, STEM consultants,
Gulbarga Gulbarga

Assistant Ex. Engineer Exicutive Engineer

KUIDFC, Shahabad KUIDFC, Gulbarga

Page 3 of 39 STEM
Proposed Construction of 15L litres capacity OHT KUIDFC

NAME OF WORK :-Proposed Construction of ELSR of 15 lakh litres capacity at WTP,Yadgir

Estimate for Construction of ELSR of 15 Lakh ltr. Capacity 15Mtr Staging ht
Slno Description of item Unit No L B D Qty Rate Amount Remarks

Earth work excavation for pipeline trenches (except building works)

including depositing on bank with all lead including shoring, strutting,
barricading, danger lighting and using sight rails and boning rods at
every 100 metres wherever necessary as directed in the following strata
etc., complete with all lead and lifts and as per the direction of the
Engineer-in-charge.
1 Cum
In disintegrated rock, soft rock, soft shale, medium hard rock
comprising of lime stone sand stone hard shale schist, fissured rock
without resorting to blasting.

(KUWS & DB 2015-16,P.No.5, item No.1.ii)a

0 to 2 Mtr. depth 3.142 11.98 6.95 2.00 522.99 395.00 206582.53

Providing and laying C.C. 1:3:6 proportion for foundation (Screed

layer) with 40 mm and down size of approved gradation hard broken
granite, trap, basalt or with any other approved hard aggregate
including cost and conveyance of all materials with all lead & lift
2 including plywood/steel form work, machine mixing, laying, tamping, Cum
curing as per the direction of the Engineer-in-charge.

(KUWS&DB 15-16 page No. 141, item no. 2)

Leveling course 3.142 11.98 6.95 0.15 39.22 5756.00 225776.40

Providing and laying vibrated C.C. 1:1½:3 proportion for RCC work
(excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard broken granite, trap, basalt or with any other
approved hard aggregate including machine mixing cost and
conveyance of all materials with all lead & lift for RCC works laid in
3 cum
15 cms., thick layers, well consolidated, vibrating, curing, smooth
finishing the exposed faces wherever necessary plywood / steel form
work, centering etc., complete for independent footing, raft, combined
footing below ground level etc., complete with all lead and lifts and as
per the direction of the Engineer-in-charge.

(KUWD&DB 15-16 page No. 143, item no. 3 (a)

Trapazoidal portion(H/3(A1+A2+
(√(A1*A2))=1.05/3(3.142*11.98*6.75+3.142*11.98*0.75+√(3.142*11.98*6.75*3.142*11.98*0 128.45
.75))

Rectangular portion 3.142 11.98 6.75 0.3 76.22

TOTAL 204.67 6727.00 1376837.62

Providing and laying vibrated C.C. 1:1½:3 proportion for RCC work
(excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard broken granite, trap, basalt or with any other
approved hard aggregate including machine mixing cost and
conveyance of all materials with all lead & lift for RCC works laid in
15 cms., thick layers, well consolidated, vibrating, curing, smooth
4 finishing the exposed faces wherever necessary plywood / steel form Cum
work, centering etc., complete for independent footing, raft, combined
footing below ground level etc., complete with all lead and lifts and as
per the direction of the Engineer-in-charge.

(2)-do- smooth finishing the expose faces in CM 1:4, 12 mm thick etc.,

complete for beams below GL.
(KUWD&DB 15-16 page No. 143, item no. 3 (b)

Above trapezoidal footing (rectangular girder) 3.14 11.98 0.45 0.50 8.47

3.14 11.98 0.75 0.15 4.23

TOTAL 12.70 6918.00 87848.84

Providing and laying vibrated C.C. 1:1½:3 proportion for RCC work
(Excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard broken granite, trap, basalt or any other
approved hard aggregate including cost and conveyance of all materials
5 with all lead & lift including maching mixing plywood/steel form
work, centering, scaffolding, curing, smooth finishing the exposed
faces in C.M. 1:3 12 mm thick as per designs etc., complete with all
lead and lifts and as per the direction of the Engineer-in-charge.
for RCC Shaft.

(KUWD&DB 15-16 page No. 145, item no. 5

ii) Upto 6.0 Mtr. Height Cum 3.14 11.98 0.23 6.00 50.79
Deductions-doors -1.00 1.00 0.23 2.10 -0.47
ventilators -9.00 0.50 0.20 0.50 -0.45
TOTAL 49.87 13342.00 665390.32
-do- for RCC steining above ground level above 6Mtr upto 9.00 Mtr.
iii) Cum 3.14 11.98 0.23 3.00 25.40
height
ADD FOR PLATFORM 2.00 1.00 1.00 0.12 0.24
TOTAL 25.64 13758.00 352716.31
-do- for RCC steining above ground level above 9 m &u pto 12.00 Mtr.
iv)
height
Cum 3.14 11.98 0.23 3.00 25.40
1.00 1.00 1.00 0.12 0.12
TOTAL 25.52 14174.00 361680.49
-do- for RCC steining above ground level above 12 m &upto 15.00
v) Cum 3.14 11.98 0.23 3.00 25.40
Mtr. height
1.00 1.00 1.00 0.12 0.12
-9.00 0.50 0.20 0.50 -0.45
-1.00 1.00 0.20 2.10 -0.42
TOTAL 24.65 14591.00 359626.99

OHT Page 4
Proposed Construction of 15L litres capacity OHT KUIDFC

Providing and laying vibrated C.C.M30 proportion for RCC work

(Excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard, broken granite, trap, basalt or any other
approved hard aggregate with smooth finishing the exposed faces in
6 C.M. 1:3 12mm thick including cost and conveyance of all materials
with all lead & lifts. including machine mixing, plywood/steel form
work, centering, scaffolding, curing, as per designs etc., complete for
columns, braces and ring beam above ground level. (Minimum Cement
@ 400 Kgs)

(KUWD&DB 15-16 page No. 143, item no. 4 (4)

Above 12 Mtr. upto 15 Mtr. staging Cum 3.142 11.975 0.65 1 24.46
1 4.1 0.4 0.48 0.79
1 4.1 0.75 0.12 0.37
TOTAL 25.61 20664.00 529261.71
(1) Providing and laying vibrated C.C. M30 design mix for RCC work
(excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard broken. granite, trap, basalt or any other
approved hard aggregate including cost and conveyance of all materials
with all lead & lift, plywood/steel form work, centering, scaffolding,
smooth finishing the exposed faces in C.M. 1:3 12 mm thick and CM
plastering 1:3 proportion 20 mm thick for inside with an admixture of
7 water proof compound of requisite proportion of approved quality
including machine mixing, curing etc., and reservoir given satisfactory
water proof testing as per directions, etc., complete, for shell portion,
bottom dome, bottom slab and ribs over the staging. (contractor will
make his own arrangements for procuring water for testing).(Cement
@ 360kgs)

For Side Wall

(KUWD&DB 15-16 page No.145, item no.6 (b) 4)

(2) -do- for Side Wall Cum 3.142 18 0.23 3.25 42.28 27140.00 1147360.06

Providing and laying vibrated M30design mix for RCC work

(Excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard, broken granite, trap, basalt or any other
approved hard aggregate with smooth finishing the exposed faces in
8
C.M. 1:3 12mm thick including cost and conveyance of all materials
with all lead & lifts. including machine mixing, plywood/steel form
work, centering, scaffolding, curing, as per designs etc., complete for
columns, braces and ring beam above ground level.

(KUWD&DB 15-16 page No. 143, item no. 4 (4)

Top ring Beem, Middle ring beem, Platform arround Top and Middle
Cum
Ring Beam
Top ring beam 3.142 18.7 0.7 0.4 16.45
Platform around top beam 3.142 20.3 0.9 0.12 6.89
Middle ring beam 3.142 18.5 0.5 0.65 18.89
Platform around middle beam 3.142 20.125 0.325 0.12 2.47
TOTAL 44.70 20664.00 923626.76

Providing and laying vibrated M30 design mix for RCC work
(excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard broken. granite, trap, basalt or any other
approved hard aggregate including cost and conveyance of all materials
with all lead & lift, plywood/steel form work, centering, scaffolding,
smooth finishing the exposed faces in C.M. 1:3 12 mm thick and CM
9 Cum
plastering 1:3 proportion 20 mm thick for inside with an admixture of
water proof compound of requisite proportion of approved quality
including machine mixing, curing etc., and reservoir given satisfactory
water proof testing as per directions, etc., complete, for shell portion,
bottom dome, bottom slab and ribs over the staging. (contractor will
make his own arrangements for procuring water for testing).

(KUWD&DB 15-16 page No.145 item no.6.a. (4)

For conical Wall and Bottom dome 3.142 18.62 12.595 3.5320187 0.62 107.39
2 3.142 12.078 1.675 0.15 19.07
TOTAL 126.46 23261.00 2941516.95
Providing and laying vibrated M30 design mix for RCC work
(excluding cost of reinforcement) with 20 mm and down size of
approved gradation hard broken granite, trap, basalt or any other
approved hard aggregate including cost and conveyance of all materials
with all lead and lifts above staging including machine mixing,
10 cum
centering, plywood/steel form work, scaffolding, tamping, curing,
cement mortar plastering 1:3 proportion 12 mm thick for both inside
and outside surface etc., complete-Top dome

(KUWD&DB 2015-16 page No.147, item no-7. 4)

Above 12 Mtr. upto 15 Mtr. staging 2 3.142 18.075 2.4 0.12 32.72 26026.00 851570.72

OHT Page 5
Proposed Construction of 15L litres capacity OHT KUIDFC

Supplying and fixing passed steel door frames size 125x65mm

manufactured from 1.25mm thick carobon steel or imported steel strips
with mitred joints of 900 for door openings and shutters made out of
seasoned hone wood, styles of 30 mm, thick with lock rail of 160mm
width, and bottom rails of 250mm width and panel filling with 12mm
thick particle board of exterior grade bonded wth phenol formal dehide
resin and the shutter shall be rot proof, vermin proof, heat resistant
11 guaranteed against shrinkage, warpage and such other defects for a
period of 3 yeas. This shall be as per approved drawings, specification
and direction including cost of conveyance, manufacturing, painting
with enamel paint 2 coats over primer coat, cost of labour for all items
of work, machinery, equipment and all other incidental charges with
alL lead, lift, loading and unloading etc., complete with all lead and
lifts and as per the direction of the Engineer-in-charge.
The hollow portion of the frame to be flled with cement concrete 1:2:4

(PW,P & IWTD-16-17 page No.40, item no.7.26

Sqm 2.00 2.10 1.00 4.20 3500.00 14700.00
Supplying and fixing pressed steel window frame of size 100x50mm
manufactured from 1.25mm thick carbon stel or imported steel strips
with neat mitred joins at 900 degree for window openings and shall be
suitable of fix M.S. grills as per design and drawings using 12mm dia
rods at 100mm centre to centre horizontally and two members of M.S.
flats of 6mmx40mm size at 150mm apart, welded into a frame of
6mmx40mm size M.S. flats with 16mm size lugs, and 8 Nos. of 10mm
size hines, 4 nos. of but stay pins and 4 nos. Two bolts and shutters
12 half panelled and half glazed with shutters made out of seasoned hone
wood styles of 30mm thick and 10mm width and rails of 30mm thick
and panel, filling with 12mm thick particle board of exterior grade
boded with phenol formal dehide resin and the shutters shall be rot
proof vermin proof, heat resistant guaranteed against shrinkage, warp
age and such other defects for a period of 3 years.

This shall be as per approved drawing, specification and direction

including cost of conveyance, manufacturing painting with 2 coats
enamel paint over one coat primer, cost of labour for all times of work,
machinery, equipment and all other incidental charges with all lead, lift
loading and unloading etc., complete with all lead and lifts and as per
the direction of the Engineer-in-charge.
The hollow portion of the frame to be filled with cement concrete
1:2:4”

(PW,P & IWTD-16-17 page No.40, item no.7.27 Sqm 18.000 0.50 0.50 4.50 3800.00 17100.00

Providing two coats of water proof cement painting of approved colour

and shade over one coat of primer including scraping the surface with
wire brushes etc., before removal of scaffolding for new R.C.C. over
13 Sqm
head tanks and cleaning of paint stains wherever necessary etc.,
complete with all lead and lifts and as per the direction of the Engineer-
in-charge.

(KUWSD&DB 15-16 page No.161, item no.17.4)

TOP DOME 2.00 3.14 18.20 2.52 288.13

TOP RING BEAM 3.14 19.40 0.76 46.02
SIDE WALL 3.14 18.45 3.50 202.89
MIDDLE RING BEAM 3.14 19.80 0.81 50.39
CONICAL WALL 3.14 19.24 13.22 3.53 180.09
BOTTOM DOME 2.00 3.14 12.00 1.60 120.68
BOTTOM RING GIRDER 3.14 12.63 1.54 60.99
SHAFT 3.14 12.20 14.00 536.65
TOP PLATFORM 3.14 20.30 1.92 122.46
BOTTOM PLATFORM 3.14 20.13 0.45 28.14
1636.45 225.00 368201.33

Supplying & fixing 40 mm dia G.I. medium duty pipes hand railing 3
rows fixed to 1:2:4 (M-150) vibrated R.C.C. post of size 100 x 150 mm
at top and 150 x 150 mm at bottom placed at 2 Mtr. intervals for a
14 height of 750 mm including curing, painting G.I. pipes with two coats Rmt
of anticorrosive steel paint over a primer coat etc., complete with all
lead and lifts and as per the direction of the Engineer-in-charge.
(Rate per Mtr. is for 3 rows of G.I. pipes)

(KUWD&DB 15-16 page No.163, item no.18 )

TOP RING BEAM 3.14 21.20 66.61
BOTTOM RING BEAM 3.14 20.45 64.25
PLATFORMS 3.00 3.00 9.00
139.86 862.00 120563.03

Providing and fixing M.S. ladder between landing 45 cms. wide using
angle iron of following size 20 mm M.S. bars at 25 cms. centre to
centre with necessary supports of same angle iron as directed including
hand railing on both sides with 25mm dia G.I. pipes with angle iron
15 Rmt
porps at 2 mtrs., interval and 0.5 mtr. height including fixing in ground
with C.C. 1:2:4 and two coats of nonpoisonour anticorrosive
bituminous paint etc., complete with all lead and lifts and as per the
direction of the Engineer-in-charge.

(KUWS & DB 2015-16 Pg no-151 item No -10.(b)

22.70 2678.00 60790.60

Providing Aanodiesed Aaluminium Ladder using 65mmx32mm

(Aprox) C section x 3.00 mm for ladder side channels and 25mm dia
fluted pipe for Rungs at 250mm C/C, Ladderfixed at an angle of 70
degrees to Horizontal including necessary 25mm dia G.I. struts with
16 Rmt
necessary G.I Fastners for bracking the ladder to the Tank Walls to to
prevent Buckling of the ladder with necessary CC 1:2:4 bed for
embedding the ladder bottom etc., complete with all lead and lifts and
as per the direction of the Engineer-in-charge.

PREC (R.W.S.S.R.) GUL- 2008-09 Pg no-53 item No 4.6.2 6.50 1313.00 8534.50

OHT Page 6
Proposed Construction of 15L litres capacity OHT KUIDFC

Supplying & fixing C.I. Duck foot bend with all accessories etc.,
complete with all lead and lifts and as per the direction of the Engineer-
17 in-charge.
100mm Nos. 1 1
150mm Nos. 1 1
200mm Nos. 1 1
250mm Nos. 1 1

Providing and fixing R.C.C. finial and ventilators as per approved

design and specification with form work and protected with wire mesh.
The plinth to be of RCC circular pillars and canopy with an ornamental
18 finish at top. The first 22.50cms height to be covered with RCC Nos.
panelling as per detailed drawing etc., complete with all lead and lifts
and as per the direction of the Engineer-in-charge.

1) For tanks upto 15 lakh litres capacity

(KUWS & DB 15-16 Pg no-151 item No 11.(3) 1 1.00 6475.00 6475.00

Providing and fixing M.S. Inspection door of size 60 cms x 60 cms

including M.S. frame, size 50x50x6 mm and shutters of 3 mm
19 thickness with hinges at top and locking arrangements painting etc., Nos. 1 1.00 2205.00 2205.00
complete with all lead and lifts and as per the direction of the Engineer-
in-charge.

(KUWS & DB 15-16Pg no-151 item No 12

Providing and fixing guage with iron sheet of 3 mm to 4 mm

thickness, 0.23 Mtr. width with copper floats indicators and flexible
nylon wires, painting figures with approved enamelled paint etc.,
20 complete with all lead and lifts and as per the direction of the Engineer- Nos.
in-charge.

(KUWS & DB 2015-16 Pg no-151 item No 13. (4)

4.2 Mtr. depth 1 1.00 7448.00 7448.00

Supplying and fixing lightening arrestor of aluminium strip 25 mm x 3

mm size including finial and grounding, aluminium strip is to be
embeded in one of the columns in an independent GI conduit of 40 mm
21 dia pipe suitably jointed by collars with all specials etc., complete with Nos.
all lead and lifts and as per the direction of the Engineer-in-charge.

(KUWS & DB 2015-16 Pg no-161 item No 16.4

For tanks above 12 Mtr. upto 15 Mtr. staging 1 1.00 18610.00 18610.00

Supplying & fixing C.I. puddle flanges confirming to IS 7181-1986

with latest amendments. In postion for RCC including hoisting and
conveying them to work spot etc., complete with all lead and lifts and
as per the direction of the Engineer-in-charge.

22
(KUWS & DB 2015-16 Pg no-155 item No 14 (1)

100 mm Nos. 1 1.00 3958.00 3958.00

150 mm Nos. 1 1.00 6236.00 6236.00
200 mm Nos. 1 1.00 9060.00 9060.00
250 mm Nos. 3 1.00 11938.00 11938.00

Supplying, laying of CI flanged pipe true to line / hoisting of CI

flanged pipe confirming IS7181-1986 with latest amendments in
position and aligning to correct plumb including conveying to work
spot etc., complete with all lead and lifts and as per the direction of the
Engineer-in-charge.
23
(KUWS & DB 2015-16 Pg no-155 item No 15 (A)
100mm (Scour ) m 20 1.00 3425.00 3425.00
150mm (Over flow) m 30 1.00 5464.00 5464.00
200mm(Out let) m 24 1.00 7805.00 7805.00
250mm (Inlet) m 36 1.00 10421.00 10421.00

Providing and fabricating torsteel bars of all sizes for reinforcements

for RCC work including conveying steel to work spot with all lead
including cleaning, straightening, bending, fabricating, placing in
position and tieing as per design including cost of binding wire
hoisting etc., with all lifts etc., complete (Including cost of steel) cost
of material, labour HOM of machine etc., complete with all lead and
lifts and as per the direction of the Engineer-in-charge.
24 M.T.
(KUWS & DB 2015-16 Pg no-105 item No 9.3)
Steel
considered
as on
Above 12 Mtr. upto 15 Mtr. Staging-110 kg/cum 614.81 110 67.63 58127.00 3931064.54
25.10.2017(
sail & vizag
steel)

Supplying valves of Board approved make conforming to relevant ISS

with latest amendments as detailed below of following diameters and
types and conveying to work site, loading, unloading, stacking
etc.,complete with all lead and lift and fixing CI valves etc., as per the
direction of the Engineer-in-charge. The rate is inclusive of cost of
Bolts and Nuts
25
CI sluice valves Body & Seat ring bronze PN 1.6 conforming to IS
14846:2000
(KUWS & DB 2015-16 Pg no-51 item No 10.(2)
100 mm Nos. 1 1.00 9350.00 9350.00
150 mm Nos. 1 1.00 13999.00 13999.00
200 mm Nos. 1 1.00 27330.00 27330.00
250 mm Nos. 2 1.00 40209.00 40209.00

Valve chamber. Providing and constructing of size 1.5x2.0m valve

chamber construction earth work excavation in all soil, bed concrete in
CC 1:3:6 of 15cm thick stone mansory in cm 1:6, RCC 1:1.5:3 slab of
26 15cm thick including cement pointing in cm 1:2, MS Inspection
chamber frame0.6mx0.6m cover including excavation & centring etc.,
complete with all lead and lifts and as per the direction of the Engineer-
in-charge.

As per sub estimate Nos. 5 5.00 46373.00 231865.00

Total Amount in Rs 14966548

OHT Page 7
NAME OF WORK :-Proposed Construction of ELSR of 15 lakh litres capacity at WTP,Yadgir

Estimate for construction of Air valve chamber (2.MX1.5M)

Sl.
Description Unit No L B D Qty Rate Amount
No
1 Earth work excavation for pipeline trenches(except
building works) including depositing on bank with all lead
including shoring, strutting, barricading, danger lighting
and using sight rails and boning rods at every 100
meters wherever necessary as directed in the following
strata.
a) in all soil mixed with boulders up to 30cm size and
exclusive of disintegrated rock
(KUWS & DB 2015-16,P.No.5, item No.1.i)a

As per trail pit avg depth

Cu
0 to 2 Mtr. Depth 1 3.20 2.70 1.74 ### 175.00 2630.00
m
Earth work excavation for pipeline trenches(except
building works) including depositing on bank with all lead
including shoring, strutting, barricading, danger lighting
and using sight rails and boning rods at every 100
meters wherever necessary as directed in the following
strata.
b) iii) -do- in hard laterite rock or hard laterite rock
containing iron ore up to 20% by chistelling and
trimming to proper slope.
(KUWS & DB 2015-16,P.No.7, item No.1.iii)a

As per trail pit avg depth

Cu
0 to 2 Mtr. Depth 1 3.20 2.70 0.36 3.11 602.00 1872.00
m
2 KSRB 4-1.42 Providing & laying in position plain cement
concrete of mix 1:3:6 using 20 mm and down size
graded granite metal, machine mixed, concrete laid in
layers not exceeding 15 cm thick, well compacted in
foundation & plinth, including cost of all materials,
labour, HOM of machineries , curing with all lead and lift,
including cost and conveyance of all materials, labour, all
other incidental charges etc., complete as per
specification and as directed by the Engineer-in-charge
of work.

(KUWS&DB 15-16 page No. 141, item no. 2)

Bed concrete Cum 1 3.20 2.70 0.10 0.86 5756.00 4950.00

3 Providing and laying insitu vibrated M-15 ( 28 days cube
compressive strength not less than 15 N /sq mm ) grade
cement concrete using 40 mm down approved, clean,
hard, graded aggregates for foundation filling / levelling
course including cost of all materials, machinery, labour,
formwork, cleaning bed, batching, mixing, placing in
position, levelling, vibrating / tamping, finishing, curing
etc., complete with lead upto 50 m. ( Cement content :
240 kg / com for use of super plasticiser )
 (WRD, 16-17 It. No.5.9.1 P. No 34 )
Cum 1 2.00 1.50 0.05 0.15 5244.00 787.00

4 Providing and constructing granite, trap or basalt or

basalt or any other approved hard granite stone coursed
rubble masonry, second sort/size stone masonry in CM
1:4 proportion (excluding pointing) in courses not less
than 20 Cms high with bond stones 2 Mtrs. apart in each
course and all exposed quions 2 line dressed 5 cms wide
on each face including scaffolding curing with all lead &
lift for materials, necessary hydraulic test for water
tightness etc., complete. (contractor will make his own
arrangements for procuring water for testing)

(KUWS & DB 2015-160, Pg no-171, item No.8) Cum 2 2.90 0.45 2.00 5.22
Cum 2 1.20 0.45 2.00 2.16
Net qty 7.38 2945.00 21734.00
5 KSRB 15.1.1 Providing flush pointing to square rubble,
course or uncoursed stone masonry with cement
mortar 1:3 20mm deep, after raking joints to depth of
20mm nicely lining, including cost of materials, labour,
curing complete as per specifications.

(PW,P & IWTD,Gulbarga circle Gulbarga, 10-11 It.

No.15.1, P. No 96 )

Sqm 2 2.00 2.00 8.00

Sqm 2 1.50 2.00 6.00
Sqm 14.00 60.89 852.00
6 Providing and laying insitu vibrated M-15 ( 28 days cube
compressive strength not less than 15 N /sq mm ) grade
cement concrete using 40 mm down approved, clean,
hard, graded aggregates for foundation filling / levelling
course including cost of all materials, machinery, labour,
formwork, cleaning bed, batching, mixing, placing in
position, levelling, vibrating / tamping, finishing, curing
etc., complete with lead upto 50 m. ( Cement content :
240 kg / com for use of super plasticiser )

(WRD, 16-17 It. No.5.9.1 P. No 34 )

Cum 2 2.90 0.45 0.05 0.13
Cum 2 1.20 0.45 0.05 0.05
Cum 0.19 5244.00 996.00
7 KSRB 4.2.2 : Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm (M20)
and down size graded granite metal, machine mixed,
concrete laid in layers not exceeding 15 cms thick,
vibrated for all works in foundation plinth and ground
floor level for retaining walls, return walls, walls (any
thickness) including attached plasters, columns, piers,
abutments pillars, posts, struts, buttresses, string or
lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window cills, fillets etc., including cost of all
materials, labour, HOM of machinery, curing, complete
as per specifications. Specification No. KBS 4.1, 4.6

PWD sr 2016-17,page no 18,item no-4.48

Cum 1 2.90 2.40 0.15 1.04 6060.00 6302.00
8 KSRB 4.9.2 : Providing T.M.T. Steel reinforcement
for R.C.C. work including straightening, cutting,
bending, hooking, placing in position, lapping and / or
welding wherever required, tying with binding wire and
anchoring to the adjoining members wherever necessary
complete as per design (laps, hooks and wastage shall
not be measured and paid) cost of materials, labour,
HOM of machinery complete as per specifications.
Specification No. KBS 4.6.3

PWD DSR-10-11 It. No. 4.45, P. No. 16

qntl
Take 80 Kg/Cum of concrete ` 1 0.84 0.84 4815.00 4045.00
9 Providing and fixing M.S. Inspection door of size 60 cms
x 60 cms. including M.S. frame, size 50 x 50 x 6 mm and
shutters of 3mm thickness with hinges at top and locking
arrangements painting with all lead and lifts etc.,
complete.

(KUWS & DB 2015-16 Pg no-151item No:12) each 1 1.00 2205.00 2205.00

Total 46373.00

Grand Total-- 46373.00

 NAME OF WORK :- New Bulk Water Supply system, Rehabilitation and Distribution system & WTP to Shahabad Town
ESTIMATION FOR PURE WATER SUMP AT WTP SHAHABAD

Sl.
Description Unit No L(M) B(M) D(M) Qty Rate Amount
No

Earth work excavation for water retaining structer including

depositing on bank with all lead including shoring, strutting,
barricading, danger lighting and using sight rails and boning
rods at every 100 metres wherever necessary as directed in the
following strata.

In all Soils mixed with boulders

1 0-2mtr Cum 0.785x14.340^2x0.50 100.48

v) -do- Disintegrated rock,
0-2mtr depth Cum 0.785x14.34^2x1.5 301.44
2-4mtr depth (Schdule No 2 It No 2) 0.785x14.34^2x0.5 100.48

Do in hard rock by chistelling (As per KUWS & DB 08-09)

2-4mtr depth Cum 0.785x14.34^2x0.45 90.43

Providing and laying C.C. 1:3:6 proportion for foundation

(Screed layer) with 40 mm and down size of approved
gradation hard broken granite, trap basalt or with any other
approved hard aggregate including cost and conveyance of all
materials with all lead & lifts including plywood / steel form
work, machine mixing, laying, tamping, curing etc., complete.
2 Including dewatering charges complete with all lead & lift as
per the direction of the Engineer-in-charge.

for foundation Cum 0.785x14.34^2x0.15 30.14

Providing and laying vibrated C.C. 1:1½:3 proportion for

RCC work (excluding cost of reinforcement) with 20 mm and
down size of approved gradation hard broken granite, trap,
basalt or with any other approved hard aggregate including
machine mixing cost and conveyance of all materials with all
lead & lift for RCC works laid in 15 cms., thick layers, well
consolidated, vibrating, curing, smooth finishing the exposed
faces wherever necessary plywood / steel form work, centering
etc., complete for independent footing, raft, combined footing
below ground level with all lead and lift etc., and as per the
3 direction of the Engineer-in-charge.

2) -do- for RCC steining below ground level.

a) Raft Cum 0.785x14.04^2x0.40 80.38

Net qty 80.38

Providing and laying vibrated 1:1½:3 proportion for RCC

work(excluding the cost of reinforcement) with 20 mm and
down size of approved gradation hard, broken
granite,trap,basalt or any other approved hard aggregate with
smooth finishing the exposed faces in C.M. 1:3 12mm thick
including cost and conveyance of all materials with all lead &
lift including machine mixing , plywood /steel formwork
,centering, shuttring, curing, scaffolding, curing as per design
etc.,complete for columns ,braces and ring beam above ground
4 level, etc., complete as per the direction of the Engineer-in-
charge.
4

Vertical side wall above FGL Cum 3.142x12.82x0.22x2.750 24.37

Haunch portion at bottom Cum 3.142x12.300x(0.5x0.3x0.3) 1.74

26.11

Providing and laying vibrated 1:1½:3 proportion for RCC

work(excluding the cost of reinforcement) with 20 mm and
down size of approved gradation hard, broken
granite,trap,basalt or any other approved hard aggregate with
smooth finishing the exposed faces in C.M. 1:3 12mm thick
including cost and conveyance of all materials with all lead &
lift including machine mixing , plywood /steel formwork
,centering, shuttring, curing, scaffolding, curing as per design
5 etc.,complete for columns ,braces and ring beam above ground
level, etc., complete as per the direction of the Engineer-in-
charge.

Top Ring Beam -1 Cum 3.142x 12.90 x0.3x0.25 3.04

Top Ring Beam -2(Finial) Cum 3.142x 0.85 x0.25x0.20 0.13
Plat Form for M.S.Ladder Cum 2.00 1.00 1.00 0.15 0.30
net qty Cum 3.47

Providing and laying vibrated C.C. 1:1½:3 proportion for RCC

work (Excluding cost of reinforcement) with 20 mm and down
size of approved gradation hard, broken granite, trap, basalt or
any other approved hard aggregate with smooth finishing the
exposed faces in C.M. 1:3 12mm thick including cost and
conveyance of all materials with all lead & lifts. including
machine mixing, plywood/steel form work, centering,
scaffolding, curing, as per designs etc., complete for columns,
6 braces and ring beam above ground level with all lead and lift
etc., and as per the direction of the Engineer-in-charge.

Top Dome -2 x 3.142 x r x h x thick

Cum 2 x 3.142x 9.190x2.5x((0.15+0.12)/2) 19.49
upto 4 m staging
Deduct- inspection door Cum -2.00 0.60 0.60 0.15 -0.11
Deduct- Top Ring Beam Portion Cum -1.00 0.785 0.36 0.14 -0.04
19.34

Providing T.M.T. Steel reinforcement for R.C.C. work

including straightening, cutting, bending, hooking, placing in
position, lapping and / or welding wherever required, tying
with binding wire and anchoring to the adjoining members
wherever necessary complete as per design (laps, hooks and
7 wastage shall not be measured and paid) cost of materials,
labour, HOM of machinery complete as per specifications with
all lead and lift etc., complete as per the direction of the
Engineer-in-charge.

Steel taken As per BBS Qtl 165.15 165.15

Filling alround the well behind steining with available

excavated rubble or earth (obtained from the well excavation)
including providing and laying necessary graded filter media
(6mm to 40 mm. size alround the weep holes) as directed and
hand packing wherever necessary without causing damage to
well steining with all lead and lift etc., complete as per the
8 direction of the Engineer-in-charge.
Labour charges for back filling
8

Filling alround the sump

Filling qty=Total earth work -(pcc+Raft+circular portion)
Net qty Cum 161.95

Supplying & Fixing CI puddle flanges confirming to IS 7181-

1986 with latest amendments,in position for R.C.C. walls
including hoisting and conveying them to work spot with all
lead and lift etc., complete.
9

150mm for scour( Schdule No 14 Item No 8) No 1 1.00

250mm for over flow No 1 1.00
500mm No 2 2.00
supplying , laying of CI double flanged pipe true to line/
hoisting of CI flanged pipe confirming to 7181-1986 with atest
comendments in position and aigning to correct pumb
including cost of jointing material conveying to work spot
10 with a lead and lifts etc.,complete

150mm mtr 1 10.00 10.00

250mm mtr 1 10.00 10.00

Supplying and fixing CI specials and fittings confirming to IS

1976 with latest ammendments, and aligning to correct plumb
including cost of jointing material to the work spot with all
11 lead and lifts etc complete

90 degree bend (Market Rate)

250mm for over flow Each 2 2.00
500mm Each 1 1.00
Fixing of CI 90 deg double flanged bend
12 250mm for over flow Job 2 2.00
500mm Job 1 1.00

Providing and fixing M.S. ladder between landing, 45 cms.

wide, using angle iron of following size and 20 mm M.S. bars
at 25cms. centre to centre with necessary supports of same
angle iron as directed including hand railing on both sides with
25mm dia G.I. pipes with angle iron props at 2 mtrs, interval
and 0.5 mtr, height including fixing in ground with C.C. 1:2:4
13 and two coats of nonpoisonous anticorrosive bituminous paint
with all lead and lift etc., complete as per the direction of the
Engineer-in-charge.

65 x 65 x 8 mm angle iron
for out side Rmt 2 5.00 10.00
net qty Rmt 10.00

Aluminium ladder inside the container : Providing Aanodiesed

Aaluminium Ladder using 65mmx32mm (Aprox) C section x
3.00 mm for ladder side channels and 25mm dia fluted pipe for
Rungs at 250mm C/C, Ladderfixed at an angle of 70 degrees
to Horizontal including necessary 25mm dia G.I. struts with
14 necessary G.I Fastners for bracking the ladder to the Tank
Walls to to prevent Buckling of the ladder with necessary CC
1:2:4 bed for embedding the ladder bottom complete with all
lead and lifts as per the directions of Engineer-in-charge.

Aluminium ladder inside Rmt 2 5.00 10.00

Providing two coats of water proof cement painting of

approved colour and shade over one coat of primer including
scraping the surface with wire brushes etc., before removal of
scaffolding for new R.C.C. over head tanks and cleaning of
paint stains wherever necessary with all lead & lift etc., with
all lead and lift etc., complete as per the direction of the
15 Engineer-in-charge.

With Primer
Side wall Sqm 1.00 3.142 13.04 2.75 112.67
Top Ring Beam Sqm 3.142x 13.20x(0.25+0.16) 17.00
15

Top Dome Sqm 2 x 3.142x 9.34 x2.62 153.77

 Sqm 283.44

RCC Finial-Providing and fixing R.C.C. finial and ventilators

as per approved design and specification with form work and
ventilating cowls and 100 mm dia CI pipes including cost of
ventilating cowls and 100 mm dia meter CI pipes and
protected with copper mesh. The plinth to be of R.C.C.
16 circular pillars and canopy with an ornamental finish at top.
The first 22.50 Cms. height to be covered with RCC panelling
as per detailed drawing with all lead and lift etc., and as per the
direction of the Engineer-in-charge.

Each 1.00 1.00

Providing and fixing M.S. Inspection door of size 60 cms x 60

cms including M.S. frame, size 50x50x6 mm and shutters of 3
mm thickness with hinges at top and locking arrangements
17 painting with all lead and lift etc., complete.

'MS Inspection Door- Each 2.00 2.00

Water Level Gauge- Providing and fixing guage with iron

sheet of 3 mm to 4 mm thickness, 0.23 Mtr. width with copper
floats indicators and flexible nylon wires, painting figures with
18 approved enamelled paint with all lead and lift etc., and as per
the direction of the Engineer-in-charge.

3)4.2 Mtr. depth Each 1.00 1.00

Lightining Arrester-'Supplying and fixing lightening arrestor

of aluminium strip 25 mm x 3 mm size including finial and
grounding, aluminium strip is to be embeded in one of the
columns in an independent GI conduit of 40 mm dia pipe
suitably jointed by collars with all specials with all lead etc.,
19 complete.

4) For tanks upto 6.0 Mtr. Staging(80% of rate of ESR )

Each 1.00 1.00
0.8x7648=6118.40

Supplying valves of Board approved make conforming to

relevant ISS with latest amendments as detailed below of
following diameters and types and conveying to work site,
loading, unloading, stacking etc.,complete with all lead and lift
and fixing CI valves. The rate is inclusive of cost of Bolts and
Nuts
20
CI sluice valves Body & Seat ring bronze PN 1.0 conforming
to IS 14846:2000

500MM Nos 1 1.00

250MM Nos 1 1.00
150MM Nos 1 1.00

Construction Sluice valve chamber. Including providing earth

work excavation,CC1;3;6 for foundation, size stone masonry
in cm1:4 with cm 1:3 pointing, coping with cc 1:2:4, and
21 covered with cast in situ RCC Slabs of 1:1.5:3, etc complete as
per drawing and Engineer in charge.(as per sub estimate)

Sluice valve chamber.(1.5mx1.5m) Nos 2 2.00

Supplying & fixing 40 mm dia G.I. medium duty pipes hand

railing 3 rows fixed to 1:2:4 vibrated R.C.C. post of size 100 x
150 mm at top and 150 x 150 mm at bottom placed at 2 Mtr.
intervals for a height of 750 mm including curing, painting
G.I. pipes with all lead and lift etc., complete as per the
direction of the Engineer-in-charge.
22

out side rmt 2.00 3.00 6.00

22

rmt 6.00
TOTAL = 0.00
 NAME OF WORK :- New bulk water supply system, distribution & WTP

SUB ESTIMATE FOR CONSTRUCTION OF PUMP HOUSE AT WTP

Sl.
Description Unit No L(M) B(M) D(M) Qty Rate
No
1 Earthwork excavation for foundation including
depositing an bank with all lead including
shoring, strutting, barricading, danger lighting.

In disintegrated rock, soft rock, soft shale,

medium hard rock comprising of lime stone
sand stone hard shale schist, fissured rock
without resorting to blasting.
(KUWS & DB 2008-09,P.No.5, item No.1.ii)a
0 to 2 Mtr. depth
Colums Cum 10.00 1.80 1.50 1.20 32.40
long wall Cum 8.00 1.00 0.75 1.00 6.00
Short wall Cum 2.00 3.20 0.75 1.00 4.80
steps Cum 2.00 2.50 1.20 0.75 4.50
Total 47.70 160.16
2 Providing and laying C.C. 1:3:6 proportion for
foundation (Screed layer) with 40 mm and
down size of approved gradation hard broken
granite, trap basalt or with any other approved
hard aggregate including cost and conveyance 0.00
of all materials with an all lead & lifts including
plywood / steel form work, machine mixing,
laying, tamping, curing etc., complete.

(KUWD&DB 08-09 page No. 117, item no. 2) 0.00

0.00
Colums Cum 10.00 1.80 1.50 0.15 4.05 0.00
long wall Cum 8.00 1.00 0.75 0.15 0.90 0.00
Short wall Cum 2.00 3.20 0.75 0.15 0.72 0.00
steps Cum 2.00 2.50 1.20 0.15 0.90 0.00
Total 6.57 2507.70
3 Providing and constructing granite, trap or
basalt or basalt or any other approved hard
granite stone coursed rubble masonry, second
sort/size stone masonry in CM 1:4 proportion
(excluding pointing) in courses not less than 20
Cms high with bond stones 2 Mtrs. apart in
each course and all exposed quions 2 line
dressed 5 cms wide on each face including 0.00
scaffolding curing with all lead & lift for
materials, necessary hydraulic test for water
tightness etc., complete. (contractor will make
his own arrangements for procuring water for
testing)
 (KUWS & DB 2008-09, Pg no-121, item No.8) 0.00

long wall Cum 8.00 1.00 0.60 1.30 6.24 0.00

Short wall Cum 2.00 3.20 0.60 1.30 4.99 0.00
steps 1 Cum 2.00 2.50 1.20 0.20 1.20 0.00
steps 2 Cum 2.00 2.50 0.90 0.20 0.90 0.00
steps 3 Cum 2.00 2.50 0.60 0.20 0.60 0.00
steps 4 Cum 2.00 2.50 0.30 0.20 0.30 0.00
Total 14.24 1624.24
4 Providing flush pointing to square rubble,
course or uncoursed stone masonry with
cement mortar 1:3 20mm deep, after raking
0.00
joints to depth of 20mm nicely lining, including
cost

PW,P&IWTD Gulbarga 09-10. pg-96.I-15.1 0.00

Long walls Sqm 8.00 1.00 0.45 7.20 0.00
Short wall Sqm 2.00 3.20 0.45 5.76 0.00
Total Sqm 12.96 55.20
5 Filling available excavated earth (excluding
rock) in sides of foundations upto plinth in
layers not exceeding 20 cms. in depth,
compacting each deposited layer by ramming
after watering with lead upto 50m. and lift upto 0.00
1.5m. including cost of all labour complete as
per specifications.

PW,P&IWTD Gulbarga 09-10. pg-6.I-2.10 0.00

Total Cum 1.00 10.00 5.00 0.45 22.50 71.09
6 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
(M20) and down size graded granite metal,
machine mixed, concrete laid in layers not
exceeding 15 cms thick, vibrated for all works
in foundation plinth and ground floor level for
retaining walls, return walls, walls (any
thickness) including attached plasters,
0.00
columns, piers, abutments pillars, posts, struts,
buttresses, string or lacing courses, parapets,
coping, bed blocks, anchor blocks, plain
window cills, fillets etc., including cost of all
materials, labour, HOM of machinery, curing,
complete as per specifications.

PW,P&IWTD Gulbarga 09-10. pg-12.I-4.11 0.00

Footing Cum 10.00 1.60 1.30 0.20 4.16
Cum 10.00 1.18 0.25 2.94
Total Cum 7.10 4400.24
7 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
and down size graded granite metal machine
mixed, concrete laid in layers not exceeding 15
cms. thick. vibrated for R.C.C. beams, columns
of all sizes in foundation plinth and 0.00
superstructure ground floor level for columns,
including cost of all materials, labour, HOM of
machinery, curing, complete as per
specifications.

PW,P&IWTD Gulbarga 09-10. pg-13.I-4.17 0.00

Columns Cum 10.00 0.23 0.45 6.15 6.37 4400.24
8 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
and down size graded granite metal machine
mixed, concrete laid in layers not exceeding 15
cms. thick. vibrated for R.C.C. beams, columns
of all sizes in foundation plinth and 0.00
superstructure ground floor level for columns,
including cost of all materials, labour, HOM of
machinery, curing, complete as per
specifications.

PW,P&IWTD Gulbarga 09-10. pg-13.I-4.17 0.00

Plinth beam 0.00
long walls Cum 8.00 2.20 0.23 0.30 1.21 0.00
short walls Cum 5.00 4.54 0.23 0.30 1.57
Total Cum 2.79 4400.24
8 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
and down size graded granite metal machine
mixed, concrete laid in layers not exceeding 15
cms. thick. vibrated for R.C.C. beams, columns
of all sizes in foundation plinth and 0.00
superstructure ground floor level for columns,
including cost of all materials, labour, HOM of
machinery, curing, complete as per
specifications.

PW,P&IWTD Gulbarga 09-10. pg-13.I-4.17 0.00

Lintel 0.00
R.S Cum 1.00 3.10 0.23 0.15 0.11 0.00
Window Cum 6.00 1.80 0.23 0.15 0.37 0.00
Total Cum 0.48 4400.24
9 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
and down size graded granite metal machine
mixed, concrete laid in layers not exceeding 15
cms. thick. vibrated for R.C.C. beams, columns
of all sizes in foundation plinth and 0.00
superstructure ground floor level for columns,
including cost of all materials, labour, HOM of
machinery, curing, complete as per
specifications.

PW,P&IWTD Gulbarga 09-10. pg-13.I-4.17 0.00

Beam for Girder 0.00
long walls Cum 8.00 2.20 0.23 0.45 1.82 0.00
short walls Cum 2.00 4.54 0.23 0.45 0.94 0.00
inclined protion Cum 2.00 10.60 0.40 0.28 2.33 0.00
Total Cum 5.10 4400.24
10 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
and down size graded granite metal machine
mixed, concrete laid in layers not exceeding 15
cms. thick. vibrated for R.C.C. beams, columns
of all sizes in foundation plinth and 0.00
superstructure ground floor level for columns,
including cost of all materials, labour, HOM of
machinery, curing, complete as per
specifications.

PW,P&IWTD Gulbarga 09-10. pg-13.I-4.17 0.00

Platfrom for Motor & pumpset Cum 2.00 2.00 1.00 0.75 3.00 4400.24
12 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 (M20) with
12mm and down size graded granite metal,
machine mixed, well compacted for plain chajja
of 7.5 cms. average thickness, upto ground
floor level, including cost of all materials, 0.00
labour, HOM of machinery, finishing, curing,
complete as per specifications.

PW,P&IWTD Gulbarga 09-10. pg-16 .I-

4.19
Chajja For RS Sqm 1.00 2.50 0.50 1.25
Chajja For Windows Sqm 6.00 1.50 0.50 4.50 0.00
Total Sqm 5.75 342.16
14 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
and down size graded granite metal machine
mixed, concrete laid in layers not exceeding 15
cms. thick. vibrated for R.C.C. beams, columns
of all sizes in foundation plinth and 0.00
superstructure ground floor level for columns,
including cost of all materials, labour, HOM of
machinery, curing, complete as per
specifications.

PW,P&IWTD Gulbarga 09-10. pg-13.I-4.17 0.00

Roof beam 0.00
long walls Cum 8.00 2.20 0.23 0.30 1.21 0.00
short walls Cum 5.00 4.54 0.23 0.30 1.57
Total Cum 2.79 4400.24
13 Providing and laying in position reinforced
cement concrete of mix 1:1.5:3 with 20mm
and down size graded granite metal machine
mixed, concrete laid in layers not exceeding 15
cms. thick. vibrated for R.C.C. beams, columns
of all sizes in foundation plinth and 0.00
superstructure ground floor level for columns,
including cost of all materials, labour, HOM of
machinery, curing, complete as per
specifications.

PW,P&IWTD Gulbarga 09-10. pg-13.I-4.17 0.00

Roof slab Cum 1.00 10.90 5.90 0.15 9.65 4400.24
15 Providing and constructing burnt brick masonry
with approved quality of modular bricks of
standard size of class designation 50 (table
moulded) with cement mortar 1:6 for
0.00
basement and superstructure including cost of
materials, labour charges, scaffolding curing
complete as per specifications.

PW,P&IWTD Gulbarga 09-10. pg-26.I-6.17 0.00

Long walls Cum 8.00 2.20 0.23 4.70 19.03
Short walls Cum 2.00 4.54 0.23 4.70 9.82
Total Cum 28.85 0.00
Deductions 0.00
Rolling shutter Cum 1.00 2.50 0.23 3.00 1.73 0.00
Window Cum 6.00 1.50 0.23 1.20 2.48 0.00
Lintel Cum 0.48 0.00
Girder beam Cum 5.10 0.00
Cum 0.00 9.79 0.00
Cum Net qty 19.06 3960.32
16 Providing and laying flooring 40mm thick, with
an under layer of 30mm thick 1:2:4 cement
concrete, using broken granite metal of
12.5mm nominal size and top layer of 10mm
thick plaster with cement mortar 1:3, finished 0.00
with floating coat of neat cement, including
cost of materials, labour, curing complete as
per specifications

PW,P&IWTD Gulbarga 09-10. pg-88, I No-

0.00
14.10
for motor and pump block Sqm 1.00 10.00 5.00 50.00 312.00

17 KSRB 4.9.2 : Providing TMT steel

reinforcement for R.C.C work including
straightening, cutting, bending, hooking,
placing in position, lapping and / or welding
wherever required, tying with binding wire and
anchoring to the adjoining members wherever
0.00
necessary complete as per design (laps and
wastage shall not be measured and paid) cost
of materials, labour, HOM of machinery
complete as per specifications. Specifications
No. KBS 4.6.3

((PW,P & IWTD,Gulbarga circle 09-10 page

No.16, item no.4.46 )100kg/cum qntl 35.32 35.32 4878.64

18 Providing and fixing pull and push type rolling

shutters of approved make out of 18 guage,
75mm wide cold rolled steel laths of convex
corrugation, with side guides and bottom rail,
with interlocking arrangements for steel laths
by means of alternate clips, suspension shaft
with High tension coil type springs two
numbers, mounted on specially designed pipe
shaft, with bracket plates, guide channels, ball
0.00
bearing arrangements, for inside & outside
locking with push & pull operations complete
including pulling hooks, 4 Nos. handles with all
fittings and accessories, painted with a coat of
red lead paint (without top cover) cost of
materials, labour, HOM of machinery complete
as per specifications. Shutter size 3mx2.8m

((PW,P & IWTD,Gulbarga circle 09-08 page

Sqm 1.00 2.50 3.00 7.50 2763.28
No.29, item no.7.5 )100kg/cum
19 Providing and fixing in position in cement
concrete 1:3:6 steel glazed windows and
ventilators side hung/top hung fully openable
as per approved drawings using Z angles of
25x33x3mm, weighing 1.419 Kg/m both for
outer and inner frames and central mullion
section of size 25x46x3mm. weighing
2.28Kg/m duly providing T section 19x19x3mm
weighing 0.839 Kg/m for glazing of windows
not more than 34 cms. c to c including
providing and fixing 4mm. thick reeded glass
with teakwood beading of required size, all
steel sections should confirm to I.S 7452:1990,
4nos. of holdfasts of approved size, section 0.00
should be cut to length welded and electrically
grinded subdividing frames or unit shall be
tenonned and revetted into the frames
electrically. All the steel surface shall be
throughly cleaned free of rust and painted with
one coat of anti-corosive paint and finishing
with two coats of ready mix paint of approved
colour and make including cost of materials,
fixtures, labour and HOM of machinery
complete as per specifications.

((PW,P & IWTD,Gulbarga circle 09-10 page 0.00

No.30, item no.7.7 )
window Sqm 6.00 1.50 1.20 10.80 2647.84
21 Providing 12mm thick cement plaster in single
coat with cement mortar 1:4, to brick masonry
includiong rounding off corners wherever
required smooth rendering, Providing and
0.00
removing scaffolding, including cost of
materials, labour, curing complete as per
specifications.

(PWD Gulbarga Circle 09-10 page No.96, item

sqm 0.00
no.15.1 )
inside Sqm 1.00 2(10+5)x5 150.00 0.00
deduction Sqm 0.00
Rolling shutter Sqm -1.00 2.50 3.00 -7.50 0.00
window Sqm -6.00 1.50 1.20 -10.80 0.00
Sqm net qty 131.70 94.62
22 Providing 12mm thick cement plaster in single
coat with cement mortar 1:4, to brick masonry
includiong rounding off corners wherever
required smooth rendering, Providing and
removing scaffolding, including cost of 0.00
materials, labour, curing complete as per
specifications.
 ((PW,P & IWTD,Gulbarga circle 09-10 page
No.96, item no.15.10 ) 0.00

out side Sqm 1.00 30.00 5.00 150.00 0.00

deduction Sqm 0.00
Rolling shutter Sqm -1.00 2.50 3.00 -7.50 0.00
window Sqm -6.00 1.50 1.20 -10.80 0.00
Sqm net qty 131.70 94.62
23 Providing & applying two coats of oil bound
washable distemper for inside walls of
approved brand & shade on wall surface
including priming coat with distemper
primer of after thoroughly brooming the
surface free from mortar drops & other foriegn
matter including repairing the surface even &
sand paper smooth, cost of materials, labour, 0.00
with all lead and lift, including cost and
conveyance of all materials, labour, all other
incidental charges etc., complete as per
specification and as directed by the Engineer-
in-charge of work. (PWD DSR 08-09 It. No.
15.49, P. No. 112)

(PWD Gulbarga Circle 09-10 page No.100, item

no 15.49 ) 0.00

qty as inside plaster Sqm 1.00 131.70 45.78

24 Providing and finishing external walls in two
coats with water proof cement paint of
approved bran and shade to give an even
shade after throghly brooming the surface to
remove all dirt and loose powdered material, 0.00
free from mortar drops and other foreign
matter cost of materials, labour, complete as
per specifications.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.101, item no.15.53 ) Sqm 1.00 131.70 32.43

qty as outside plaster 0.00

25 Providing shahabad stone floring 40mm thick
set in cm 1:8 with cement pointing in cm 1:3 0.00
proportion etc complete.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.237, item no.36.79 ) 0.00

Steps 1 Sqm 2.00 2.50 0.50 2.50 0.00

Steps 2 Sqm 2.00 2.50 0.50 2.50 0.00
Steps 3 Sqm 2.00 2.50 0.50 2.50 0.00
Steps 4 Sqm 2.00 2.50 0.50 2.50 0.00
Total Sqm 10.00 466.96
26 Providing and removing centering, shuttering,
strutting, propping etc., and removal of form
work for foundations, footings, bases of
columns for mass concrete including cost of all 0.00
materials, abour complete as per specifications.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.14, item no.4.28 ) 0.00

footing Sqm 10.00

2(1.6+1.3)x0..2 11.60
Plinth beams Sqm 8.00 2.20 0.23 2(0.3) 15.07
Sqm 4.00 4.54 0.23 2(0.3) 12.53
Total Sqm 39.21 145.60
27 Providing and removing centering, shuttering,
strutting, propping etc., for columns, pillars,
piers, abutments, post and struts, square /
rectangular / polygon in plan including cost of 0.00
all materials, labour complete as per
specification.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.15, item no.4.32 ) 0.00

Colums Sqm 10.00 2(0.23+0.45) 6.15 83.64 219.44

28 Providing and removing centering, shuttering,
strutting, propping etc., and removal of form
work for columns, pillars, piers, post and
struts, circular or curved in plan including cost 0.00
of all materials, labour complete as per
specification.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.15, item no.4.33 ) 0.00

Lintel 0.00
R.S Sqm 1.00 3.10 0.23 0.15 1.89 0.00
Window Sqm 6.00 1.80 0.23 0.15 6.59
Total Sqm 8.48 577.20
29 Providing and removing centering, shuttering,
strutting, propping etc., for chajjas, corbels
etc., including edges including cost of all 0.00
materials, labour complete as per
specifications.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.15, item no.4.37 )
Chajja Sqm 1.00 2.60 0.50 1.30
Sqm 6.00 1.50 0.50 4.50
Total Sqm 33.10 166.40
30 Providing and removing centering, shuttering,
strutting, propping etc., and removal of form
work for flat surface such as suspended floors,
roofs. landings, balconies and likes, thickness
0.00
upto 200mm including cost of all materials,
labour complete as per specifications.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.14, item no.4.29 ) 0.00

Roof slab Sqm 1.00 10.90 5.90 64.31 0.00

Beam for Gantry girder Sqm 2.00 10.00 0.45 18.00 0.00
inclined protion Sqm 2.00 10.00 0.40 0.28 8.28 0.00
Total Sqm 90.59 215.28
31 Providing and removing centering, shuttering,
strutting, propping etc., and removal of form
work for sides and soffits of beams, beam
haunchings, cantilever girders, bressumers and
0.00
lintels not exceeding 1m in depth including
cost of all materials, labour complete as per
specifications.

((PW,P & IWTD,Gulbarga circle 09-10 page

No.15, item no.4.34 ) 0.00

For Roof beam inverted Sqm 8.00 2.20 0.45 15.84

Sqm 5.00 4.54 0.45 20.43
Total Sqm 36.27 157.04
Total Amount in Rs =
WTP

Amount

838.4715

7640.00 83.43 81.00

0.00

0.00
0.00
0.00 Colums Cum 10.00 1.80 1.50 1.20
0.00 long wall Cum 8.00 1.00 0.75 1.00
0.00 Short wall Cum 2.00 3.20 0.75 1.00
0.00 steps Cum 2.00 2.50 1.20 0.50
16476.00 2455.00

0.00
 0.00
0.00
0.00
0.00
0.00
0.00
0.00
23129.00 2394 1581.00

0.00

0.00
0.00
0.00
715.00 53.08

0.00

0.00
1600.00 68.36

0.00

0.00
0.00 4231.00
0.00
31242.00
 0.00

0.00
28030.00 4231.00

0.00

0.00
0.00
0.00
0.00
12277.00 4231.00

0.00

0.00
0.00
0.00
0.00
2112.00 4231.00
 0.00

0.00
0.00
0.00
0.00
0.00
22441.00 4231.00

0.00

0.00
13201.00 4231.00

0.00

0.00 329.00
0.00
0.00
1967.00
 0.00

0.00
0.00
0.00
0.00
12277.00 4231.00

0.00

0.00
42462.00 4231.00

0.00

0.00
0.00 8.80
0.00 1.15
0.00
0.00
0.00
0.00
0.00
0.00
0.00
75484.00 3808.00
 0.00

0.00

15600.00
300.00

0.00

172314.00
4691.00

0.00

20725.00
2657.00
 0.00

0.00
28597.00 2546.00

0.00

0.00

0.00
0.00
0.00
0.00
12461.00 93.00

0.00
 0.00

0.00
0.00
0.00
0.00
12461.00 90.98

0.00

0.00

6029.00 4.57

0.00

4271.00
31.18
0.00

0.00

0.00

0.00
0.00
0.00
0.00
4670.00 449.00
 0.00

0.00

0.00 140.00
0.00 140.00
0.00 140.00
5709.00

0.00

0.00

18354.00 211.00

0.00

0.00

0.00
0.00
0.00
4895.00 555.00

0.00

0.00
160.00
0.00
0.00
5508.00
 0.00

0.00

0.00 8.00 2.20

0.00 5.00 4.54
0.00
19502.00 207.00

0.00

0.00

0.00 151.00
0.00
5696.00
627845.00 53934.59
32.40
6.00
4.80
3.00
0.35 254.0778 28.23

1.05
 8

84.69
366.9978
128.4492

76.22335
204.6726
-19.98742

254.0778 28.23087