Product data sheet ATV320U22N4B

Characteristics variable speed drive, ATV320, 2.2 kW, 380…500

V, 3 phases, book
Product availability : Stock - Normally stocked in distribution facility

Price* : 608.00 USD

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range of product Altivar Machine ATV320
Product or component type Variable speed drive
Product specific application Complex machines
Variant Standard version
Mounting mode Cabinet mount
Communication port protocol Modbus serial
CANopen
[Us] rated supply voltage 380...500 V - 15...10 %
[Us] rated supply voltage 380...500 V
Relative symmetric mains voltage 10 %
tolerance
Relative symmetric network frequency 5 %
tolerance
Nominal output current 4.8 A
Motor power kW 2.2 kW for heavy duty
EMC filter Class C2 EMC filter integrated
IP degree of protection IP20

Complementary
Discrete input number 7
Discrete input type STO safe torque off, 24 V DC1.5 kOhm
DI1...DI6 logic inputs, 24 V DC 30 V)
DI5 programmable as pulse input 0…30 kHz, 24 V DC 30 V)
Discrete input logic Positive logic (source)
Negative logic (sink)
Discrete output number 3
Discrete output type Open collector DQ+ 0…1 kHz 30 V DC 100 mA
*  Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.

Nov 11, 2020

1
 Open collector DQ- 0…1 kHz 30 V DC 100 mA
Analogue input number 3
Analogue input type AI1 voltage 0...10 V DC 30 kOhm 10 bits
AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits
AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10
bits
Analogue output number 1
Analogue output type Software-configurable current AQ1 0...20 mA 800 Ohm 10 bits
Software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Relay output type Configurable relay logic R1A 1 NO 100000 cycles
Configurable relay logic R1B 1 NC 100000 cycles
Configurable relay logic R1C
Configurable relay logic R2A 1 NO 100000 cycles
Configurable relay logic R2C
Maximum switching current Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC
Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC
Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC
Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC
Relay output R2A, R2C resistive, cos phi = 1 5 A 250 V AC
Relay output R2A, R2C resistive, cos phi = 1 5 A 30 V DC
Minimum switching current Relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Method of access Slave CANopen
4 quadrant operation possible True
Asynchronous motor control profile Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard
Voltage/frequency ratio - Energy Saving, quadratic U/f
Flux vector control without sensor - Energy Saving
Voltage/frequency ratio, 2 points
Synchronous motor control profile Vector control without sensor
Maximum output frequency 0.599 kHz
Transient overtorque 170…200 % of nominal motor torque
Acceleration and deceleration ramps Linear
U
S
CUS
Ramp switching
Acceleration/deceleration ramp adaptation
Acceleration/deceleration automatic stop with DC injection
Motor slip compensation Automatic whatever the load
Adjustable 0...300 %
Not available in voltage/frequency ratio (2 or 5 points)
Switching frequency 2...16 kHz adjustable
4...16 kHz with derating factor
Nominal switching frequency 4 kHz
Braking to standstill By DC injection
Brake chopper integrated True
Line current 8.7 A 380 V heavy duty)
6.6 A 500 V heavy duty)
Maximum Input Current per phase 8.7 A
Maximum output voltage 500 V
Apparent power 5.7 kVA 500 V heavy duty)
Network frequency 50...60 Hz
Prospective line Isc 5 kA
Base load current at high overload 4.8 A
Power dissipation in W Fan 74.0 W 380 V 4 kHz
With safety function Safely Limited True
Speed (SLS)
With safety function Safe brake False
management (SBC/SBT)
With safety function Safe Operating False
Stop (SOS)
With safety function Safe Position (SP) False

2
With safety function Safe False
programmable logic
With safety function Safe Speed False
Monitor (SSM)
With safety function Safe Stop 1 (SS1) True
With sft fct Safe Stop 2 (SS2) False
With safety function Safe torque off True
(STO)
With safety function Safely Limited False
Position (SLP)
With safety function Safe Direction False
(SDI)
Protection type Input phase breaks drive
Overcurrent between output phases and earth drive
Overheating protection drive
Short-circuit between motor phases drive
Thermal protection drive
Width 2.36 in (60 mm)
Height 12.80 in (325.0 mm)
Depth 9.65 in (245.0 mm)
Net Weight 6.61 lb(US) (3.0 kg)

Environment
Operating position Vertical +/- 10 degree
Product certifications CE
ATEX
NOM
GOST
EAC
RCM
KC
REACH
Marking CE
ATEX
UL
CSA
EAC
RCM
Electromagnetic compatibility Electrostatic discharge immunity test level 3 IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
Conducted radio-frequency immunity test level 3 IEC 61000-4-6
Voltage dips and interruptions immunity test IEC 61000-4-11
Environmental class (during operation) Class 3C3 according to IEC 60721-3-3
Class 3S2 according to IEC 60721-3-3
Maximum acceleration under shock 150 m/s² at 11 ms
impact (during operation)
Maximum acceleration under 10 m/s² at 13...200 Hz
vibrational stress (during operation)
Maximum deflection under vibratory 1.5 mm at 2...13 Hz
load (during operation)
Permitted relative humidity (during Class 3K5 according to EN 60721-3
operation)
Volume of cooling air 2985.20 Gal/hr(US) (11.3 m3/h)
Overvoltage category III
Regulation loop Adjustable PID regulator
Speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
Pollution degree 2
Ambient air transport temperature -13…158 °F (-25…70 °C)
Ambient air temperature for operation 14…122 °F (-10…50 °C) without derating
122…140 °F (50…60 °C) with derating factor

3
Ambient air temperature for storage -13…158 °F (-25…70 °C)

Ordering and shipping details

Category 22152 - ATV320/ATV312/ATV32 (.25 THRU 7.5HP)
Discount Schedule CP4B
GTIN 00785901807766
Package weight(Lbs) 6.15 lb(US) (2.79 kg)
Returnability Yes
Country of origin ID

Packing Units
Package 2 Weight 151.59 lb(US) (68.76 kg)

Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which
is known to the State of California to cause cancer and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov
REACh Regulation REACh Declaration
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins.

4
Product data sheet ATV320U22N4B
Dimensions Drawings

Dimensions

Bottom, Right and Front View

5
Product data sheet ATV320U22N4B
Mounting and Clearance

Mounting and Clearance

(1) Minimum value corresponding to thermal constraints.

(2) Optional GV2 circuit-breaker

6
Product data sheet ATV320U22N4B
Mounting and Clearance

Option: Protection Device, GV2 circuit-breaker

NOTE: The product overall height dimension, including GV2 adapter and EMC plate mounted, becomes 424 mm (16.7 in.) instead of 325 mm
(12.80 in.)

(1) Ground screw (HS type 2 - 5x12)

7
Product data sheet ATV320U22N4B
Connections and Schema

Connection Diagrams

Diagram with Line Contactor

Connection diagrams conforming to standards ISO13849 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with
standard IEC/EN 60204-1.

(1) Line choke (if used)

(2) Fault relay contacts, for remote signaling of drive status

Diagram with Switch Disconnect

Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with
standard IEC/EN 60204-1.

(1) Line choke (if used)

(2) Fault relay contacts, for remote signaling of drive status

8
Product data sheet ATV320U22N4B
Connections and Schema

Control Connection Diagram in Source Mode

(1) Analog output

(2) Analog inputs
(3) Reference potentiometer (10 kOhm maxi)
(4) Digital inputs

9
Product data sheet ATV320U22N4B
Connections and Schema

Digital Inputs Wiring

The logic input switch (SW1) is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs.
Switch SW1 set to “Source” position and use of the output power supply for the DIs.

Switch SW1 set to “Source” position and use of an external power supply for the DIs.

Switch SW1 set to “Sink Int” position and use of the output power supply for the DIs.

Switch SW1 set to “Sink Ext” position and use of an external power supply for the DIs.

10
Product data sheet ATV320U22N4B
Performance Curves

Derating Curves

Derating curve for the nominal drive current (In) as a function of temperature and switching frequency (SF).

40 °C (104 °F) - Mounting type A, B and C

50 °C (122 °F) - Mounting type A, B and C
60 °C (140 °F) - Mounting type B and C
In : Nominal Drive Current
SF : Switching Frequency

11