HDPE Fittings

and Equipment
Product Catalog

www.IntegrityFusion.com
Butt Fusion | Electrofusion | Socket Fusion | Transitions | Poly Ball Valves | Equipment
 Integri Fuse
™

Product Catalog Table of Contents

Molded Butt Fusion..........................................................................................................7
90 Degree Elbows Caps
45 Degree Elbows Flange Adapters
Tees SDR 11 DI Backup Rings
Reducing Tees SDR 7 DI Backup Rings
Reducers SDR 11 316SS Backup Rings
Lateral Wyes MJ Adapters & Kits

Electrofusion.......................................................................................................................33
Couplers Specialy Fittings
SDR 11 90 Degree Elbow
SDR 17 45 Degree Elbow
SDR 26 Tees
SDR 7 Reducers
Branch Saddles Flex Restraints
Tapping Tees

Socket Fusion......................................................................................................................53
90 Degree Elbows Couplers
Tees Caps
Reducers Socket x Brass Transitions

Transitions Fittings .......................................................................................................... 59

Supertech ID Controlled Standard NPT
Threaded MPT or FPT Epoxy Coated
Weld End MPT or FPT 304 Stainless Steel
Grooved MPT or FPT 316 Stainless Steel
IntegriFuse OD Controlled Grooved Epoxy Coated
Threaded
Grooved

Poly Ball Valves ................................................................................................................. 69

Equipment ......................................................................................................................... 73

2 www.IntegrityFusion.com
 IntegriFuse
™

PE3408 / PE4710 / PE100 HDPE Fittings Specifications

IntegriFuse fittings are manufactured with black high density bimodal polyethylene
copolymer designed for use in, but not limited to, potable water, natural gas, industrial,
landfill, oil & gas, and mining applications.

Fittings meet AWWA and ASTM-D2513 & ASTM-D3261 requirements, and are
manufactured with material that is NSF Standard 14 certified, and complies with ANSI/
NSF Standard 61 health effects requirements. IntegriFuse fittings are recognized by the
Plastic Pipe Institute as having a material designation code of
PE 3408, PE3608, PE 4710, and PE 100.

Physical Properties Metric English Comments

Density .959 g/cm3 0.0346 lb/in Black: ASTM D4883
Environmental Stress Crack >= 5000 hour >= 5000 hour Condition C; ASTM D1693
Resistance
Carbon Black Loading 2.30% 2.30% ASTM D1603
Melt Flow 8.00 g/10 min 8.00 g/10 min ASTM D1238
@Load 21.6 kg, @Load 47.6 lb,
Temperature 190 °C Temperature 374 °F
Mechanical Properties Metric English Comments
PENT >= 10000 hour >= 10000 hour Notched Tensile; ASTM F1473
Hardness, Shore D 66.0 66.0 ASTM D2240
Tensile Strength at Break 37.9 MPa 5500 PSI 2 in/min; ASTM D638
Tensile Strength Yield 24.99 MPa 3625 PSI 2 in/min; ASTM D638
Elongation at Break >= 600% >= 600% 2 in/min; ASTM D638
Flexural Modulus 1.03 GPa 150 KSI 2% Secant-Method; ASTM D790
Izod Impact, Notched 4.81 J/cm 9.00 ft-lb/in ASTM D256
6.89 MPa 1000 PSI At 60 °C; ASTM D2837
Hydrostatic Design Basis
11.0 MPa 1600 PSI Room Temp; ASTM D2837
Thermal Properties Metric English Comments
Vicat Softening Point 126 °C 259 °F ASTM D1525
Brittleness Temperature ,= -118 °C <= -180 °F ASTM D746
Decomposition Temperature >= 220 °C >= 428 °F Thermal Stability; ASTM D2513
Descriptive Properties Metric English Comments
Cell Classification 445574C ASTM D3350
Process Injection Molding

www.IntegrityFusion.com 3
 Order & Price Information
Pricing: Please contact Integrity Fusion Products, Inc, or your local authorized distributor for
pricing inquiries. We welcome all inquiries via telephone, email, or fax.

Phone: 770-632-7530
Fax: 770-632-7540
E-mail: [email protected]

Ordering: Minimum Billing: $50.00 (orders less than $50.00 will be subject to a handling
charge)

Terms: Net 30 days from date of invoice for established accounts.

Freight Charges: All orders greater than $3,000 will be shipped freight allowed via standard
ground transportation (excluding equipment, backup rings, MJ Adapter kits, fabricated &
non-stock items). Air-freight or expedited shipments will incur appropriate freight charges.
For orders less than $3,000, freight will be prepaid and added to the invoice unless otherwise
specified.

Order Placement: Orders are accepted by our Customer Service department via fax or email
and require a written purchase order. Integrity Fusion Products, Inc sells only to approved
distributors.

Availability of Product: Integrity Fusion Products Inc. has a large inventory of HDPE fittings
and accessories. Items that are in stock are typically shipped within 24 hours. Non-stock or
out of stock items will be processed with an estimated ship date given upon receipt of order.

Cancellations: Cancellation of items that have been ordered may be subject to cancellation
charges. Some non-stock items may not be returnable.

Rental Policy: Rental charges begin the date that the unit ships and continues up to, and
including, the date returned. Accrued rental costs cannot be applied to the purchase of
equipment.

4 www.IntegrityFusion.com
 Return Policy
All returns must be approved by Integrity Fusion Products, Inc prior to return.

An approved, RGA (Return Goods Authorization) form must be obtained by contacting our
Customer Service department. Upon approval, the RGA form, including a list of all items to
be returned, conditions concerning restocking fees and/or credit information, and shipping
instructions(if applicable) will be issued and sent via fax or email. A copy of the RGA form
must accompany the returned shipment for proper credit to be issued.

Policies concerning returned materials:

Products stored outside will not be accepted for return.

Standard Stock Items:

A restocking fee will be charged for the return of standard stock items:
25% restock within 1 - 30 days
35% restock within 31- 180 days
50% restock within 181 – 365 days

Integrity Fusion will not accept returns after 365 days.

Material must be returned in a saleable condition. Items stored outside will not be accepted
for return or credit.

Customer will be responsible for freight charges incurred with the return of the materials.

Non-stock or Custom Ordered Items:

Most non-stock or custom ordered items are non-cancelable/non-returnable. Any product

that is not a standard stock item is subject to factory acceptance for return approval.

Freight instructions will be issued for these items on the approved RGA form obtained by
our Customer Service department.

www.IntegrityFusion.com 5
 Limited Warranty
Integrity Fusion Products, Inc. warrants its materials to be free of defects in workmanship under
normal use, service and when used for the purposes under the conditions for which they are
intended.

This warranty shall not apply to any Integrity Fusion Products, Inc. material that has been altered,
repaired and/or used in any way, stored outside, or has been subject to misuse, negligence,
accident and/or has not been installed in accordance with installation instructions.

Installation of EF fittings requiring 42V-48V to fuse must be carried out using an IntegriFuse EF pro-
cessor. The IntegriFuse processor is an 8-48-volt output multi-voltage fusion processor with temper-
ature compensating feature operating at 110/120 VAC requiring power supplied through a portable
power generator rated at 6500 continuous watts (minimum). If pipe is more than 1.5% out of round
the use of a ReRound Clamp is recommended to ensure proper installation.

Installation instructions must be adhered to or our Limited Warranty is null and void. Installation
of electrofusion fittings must be carried out by properly trained and qualified operator(s) and/or
by witness of the factory representative.

The obligation of Integrity Fusion Products, Inc. under this warranty shall be limited to the
replacement of any part that may prove defective under normal use.

Integrity Fusion Products, Inc. shall have the right to inspect said material and purchaser shall, if
requested, return defective product prepaid to Integrity Fusion Products, Inc. Purchaser shall
assume all responsibility and expenses for removal, reinstallation and freight charges in
connection with the foregoing remedy.

Integrity Fusion Products, Inc. shall not be liable for indirect, special, incidental or consequential
damage or penalties and does not assume any liability of purchaser to others, or to anyone for
injury to persons and/or property.

Integrity Fusion Products, Inc. shall not be held liable for any delays caused by shipping any
material or equipment by third party shipping companies. Integrity Fustion Products, Inc. shall
not be responsible for any delays caused by shipping errors of material and/or equipment.

Any claim regarding shortage or damages from shipment of material must be submitted in
writing to Integrity Fusion Products, Inc within 10 days after receipt of shipment. Buyer shall note
loss or damage on shipment Bill of Lading and provide a delivery receipt stating such with driver’s
signature.
Purchaser is responsible for passing on this Limited Warranty to their customer.
6 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Fittings

90 Degree Elbows

45 Degree Elbows

Tees

Reducing Tees

Reducers

Wyes

Caps

Flange Adapters

Backup Rings

MJ Adapters & Kits

www.IntegrityFusion.com 7
 IntegriFuse
™

Molded Butt Fusion 90 Degree Elbows

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 4.25 2.95 0.14 2.38 5.44 0.28 90BI-2IPS-17
3” 5.91 4.06 0.21 3.50 7.66 0.80 90BI-3IPS-17
4” 6.89 4.53 0.26 4.50 9.14 1.64 90BI-4IPS-17
6” 9.06 5.63 0.39 6.63 12.37 4.80 90BI-6IPS-17
8” 11.81 7.20 0.51 8.63 16.13 10.05 90BI-8IPS-17
10” 13.78 8.27 0.63 10.75 19.15 18.33 90BI-10IPS-17
12” 14.96 8.46 0.75 12.75 21.33 27.47 90BI-12IPS-17

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
¾” 3.19 2.14 0.10 1.05 3.82 0.10 90BI-0075I-11
1” 3.31 2.18 0.12 1.32 4.06 0.15 90BI-010I-11
1 ¼” 3.48 2.15 0.15 1.66 4.41 0.25 90BI-0125I-11
1 ½” 3.92 2.37 0.17 1.90 5.00 0.38 90BI-0150I-11
2” 4.25 2.95 0.22 2.38 5.44 0.43 90BI-2IPS-11
3” 5.91 4.06 0.32 3.50 7.66 1.25 90BI-3IPS-11
4” 6.89 4.53 0.41 4.50 9.14 2.42 90BI-4IPS-11
6” 9.06 5.63 0.60 6.63 12.37 6.76 90BI-6IPS-11
8” 11.81 7.20 0.79 8.63 16.13 15.08 90BI-8IPS-11
10” 13.78 8.27 0.98 10.75 19.15 27.06 90BI-10IPS-11
12” 14.96 8.46 1.16 12.75 21.33 41.05 90BI-12IPS-11

www.IntegrityFusion.com 9
 IntegriFuse
™

Molded Butt Fusion 90 Degree Elbows

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 4.25 2.95 0.26 2.38 5.44 1.00 90BI-2IPS-9
3” 5.91 4.06 0.39 3.50 7.66 2.00 90BI-3IPS-9
4” 6.89 4.53 0.50 4.50 9.14 3.00 90BI-4IPS-9
6” 9.06 5.63 0.74 6.63 12.37 9.00 90BI-6IPS-9
8” 11.81 7.20 0.96 8.63 16.13 22.00 90BI-8IPS-9

SDR 7 (Standard Dimension Ratio) 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 4.25 2.95 0.34 2.38 5.44 1.50 90BI-2IPS-7
3” 5.91 4.06 0.50 3.50 7.66 3.00 90BI-3IPS-7
4” 6.89 4.53 0.64 4.50 9.14 5.00 90BI-4IPS-7
6” 9.06 5.63 0.95 6.63 12.37 12.00 90BI-6IPS-7
8” 11.81 7.20 1.23 8.63 16.13 25.00 90BI-8IPS-7

10 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion 45 Degree Elbows

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 3.23 2.64 0.14 2.38 6.38 0.23 45BI-2IPS-17
3” 4.72 3.86 0.21 3.50 9.33 0.72 45BI-3IPS-17
4” 5.31 4.21 0.26 4.50 10.63 1.32 45BI-4IPS-17
6” 6.89 5.35 0.39 6.63 14.09 3.77 45BI-6IPS-17
8” 8.46 6.54 0.51 8.63 17.48 8.03 45BI-8IPS-17
10” 10.04 7.64 0.63 10.75 20.94 14.44 45BI-10IPS-17
12” 10.63 7.80 0.75 12.75 22.64 21.30 45BI-12IPS-17

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 3.23 2.64 0.22 2.38 6.38 0.35 45BI-2IPS-11
3” 4.72 3.86 0.32 3.50 9.33 1.07 45BI-3IPS-11
4” 5.31 4.21 0.41 4.50 10.63 2.00 45BI-4IPS-11
6” 6.89 5.35 0.60 6.63 14.09 5.55 45BI-6IPS-11
8” 8.46 6.54 0.79 8.63 17.48 11.64 45BI-8IPS-11
10” 10.04 7.64 0.98 10.75 20.94 21.30 45BI-10IPS-11
12” 10.63 7.80 1.16 12.75 22.64 31.84 45BI-12IPS-11

www.IntegrityFusion.com 11
 IntegriFuse
™

Molded Butt Fusion 45 Degree Elbows

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 3.23 2.64 0.26 2.38 6.38 1.00 45BI-2IPS-9
3” 4.72 3.86 0.39 3.50 9.33 2.00 45BI-3IPS-9
4” 5.31 4.21 0.50 4.50 10.63 3.00 45BI-4IPS-9
6” 6.89 5.35 0.74 6.63 14.09 9.00 45BI-6IPS-9
8” 8.46 6.54 0.96 8.63 17.48 22.00 45BI-8IPS-9

SDR 7 (Standard Dimension Ratio) 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 3.23 2.64 0.34 2.38 6.38 1.50 45BI-2IPS-7
3” 4.72 3.86 0.50 3.50 9.33 3.00 45BI-3IPS-7
4” 5.31 4.21 0.64 4.50 10.63 5.00 45BI-4IPS-7
6” 6.89 5.35 0.95 6.63 14.09 12.00 45BI-6IPS-7
8” 8.46 6.54 1.23 8.63 17.48 25.00 45BI-8IPS-7

12 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Tees

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
3” 11.81 5.91 0.21 3.50 3.54 1.45 TEEBI-3IPS-17
4” 13.78 6.89 0.26 4.50 3.94 2.58 TEEBI-4IPS-17
6” 18.11 9.06 0.39 6.63 4.72 7.24 TEEBI-6IPS-17
8” 23.62 11.81 0.51 8.63 5.71 16.60 TEEBI-8IPS-17
10” 27.56 13.78 0.63 10.75 6.30 28.90 TEEBI-10IPS-17
12” 31.57 15.97 0.75 12.75 7.52 45.32 TEEBI-12IPS-17

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
¾” 6.38 3.19 0.10 1.05 2.14 0.13 TEEBI-0075I-11
1” 6.62 3.31 0.12 1.32 2.18 0.25 TEEBI-010I-11
1 ¼” 6.97 3.48 0.15 1.66 2.15 0.35 TEEBI-0125I-11
1 ½” 7.84 3.92 0.17 1.90 2.37 0.50 TEEBI-0150I-11
2” 8.66 4.33 0.22 2.38 2.48 0.82 TEEBI-02IPS-11
3” 11.81 5.91 0.32 3.50 3.54 2.18 TEEBI-03IPS-11
4” 13.78 6.89 0.41 4.50 3.94 4.02 TEEBI-04IPS-11
6” 18.11 9.06 0.60 6.63 4.72 10.91 TEEBI-06IPS-11
8” 23.62 11.81 0.79 8.63 5.71 24.61 TEEBI-08IPS-11
10” 27.56 13.78 0.98 10.75 6.30 42.60 TEEBI-10IPS-11
12” 31.57 15.97 1.16 12.75 7.52 67.85 TEEBI-12IPS-11

www.IntegrityFusion.com 13
 IntegriFuse
™

Molded Butt Fusion Tees

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 8.66 4.33 0.14 2.38 2.47 0.53 TEEBI-02IPS-9
3” 11.81 5.91 0.21 3.50 3.54 1.45 TEEBI-03IPS-9
4” 13.78 6.89 0.26 4.50 3.94 2.58 TEEBI-04IPS-9
6” 18.11 9.06 0.39 6.63 4.72 7.24 TEEBI-06IPS-9
8” 23.62 11.81 0.51 8.63 5.71 16.60 TEEBI-08IPS-9

SDR 7 (Standard Dimension Ratio) 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 8.66 4.33 0.14 2.38 2.47 0.53 TEEBI-02IPS-7
3” 11.81 5.91 0.21 3.50 3.54 1.45 TEEBI-03IPS-7
4” 13.78 6.89 0.26 4.50 3.94 2.58 TEEBI-04IPS-7
6” 18.11 9.06 0.39 6.63 4.72 7.24 TEEBI-06IPS-7
8” 23.62 11.81 0.51 8.63 5.71 16.60 TEEBI-08IPS-7

14 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Reducing Tees

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS L D d L1 L2 Z Weight Item
Pipe Size inches inches inches inches inches inches Code
3” x 2” 11.80 3.50 2.38 3.62 2.48 5.90 1.69 TRED-3x2IPS-17
4” x 2” 13.78 4.50 2.38 3.94 2.48 6.89 2.94 TRED-4x2IPS-17
4” x 3” 13.78 4.50 3.50 3.94 3.62 6.89 3.16 TRED-4x3IPS-17
6” x 2” 18.10 6.63 2.38 4.72 2.48 9.06 7.32 TRED-6x2IPS-17
6” x 3” 18.10 6.63 3.50 4.72 3.62 9.06 7.72 TRED-6x3IPS-17
6” x 4” 18.10 6.63 4.50 4.72 3.94 9.06 8.11 TRED-6x4IPS-17
8” x 2” 23.60 8.63 2.38 5.71 2.48 11.80 16.75 TRED-8x2IPS-17
8” x 3” 23.60 8.63 3.50 5.71 3.62 11.80 17.26 TRED-8x3IPS-17
8” x 4” 23.60 8.63 4.50 5.71 3.94 11.80 17.89 TRED-8x4IPS-17
8” x 6” 23.60 8.63 6.63 5.71 4.72 11.80 18.85 TRED-8x6IPS-17
10” x 4” 27.40 10.75 4.50 6.30 3.94 13.78 31.98 TRED-10x4IPS-17
10” x 6” 27.40 10.75 6.63 6.30 4.72 13.78 33.09 TRED-10x6IPS-17
10” x 8” 27.40 10.75 8.63 6.30 5.71 13.78 34.63 TRED-10x8IPS-17
12” x 6” 31.40 12.75 6.63 7.48 4.72 15.95 47.12 TRED-12x6IPS-17
12” x 8” 31.40 12.75 8.63 7.48 5.71 15.95 48.88 TRED-12x8IPS-17
12” x 10” 31.40 12.75 10.75 7.48 6.30 15.95 53.05 TRED-12x10IPS-17

www.IntegrityFusion.com 15
 IntegriFuse
™

Molded Butt Fusion Reducing Tees

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS L D d L1 L2 Z Weight Item
Pipe Size inches inches inches inches inches inches Code
3” x 2” 11.80 3.50 2.38 3.62 2.48 5.90 2.19 TRED-3x2IPS-11
4” x 2” 13.78 4.50 2.38 3.94 2.48 6.89 3.91 TRED-4x2IPS-11
4” x 3” 13.78 4.50 3.50 3.94 3.62 6.89 4.12 TRED-4x3IPS-11
6” x 2” 18.10 6.63 2.38 4.72 2.48 9.06 10.30 TRED-6x2IPS-11
6” x 3” 18.10 6.63 3.50 4.72 3.62 9.06 10.98 TRED-6x3IPS-11
6” x 4” 18.10 6.63 4.50 4.72 3.94 9.06 11.53 TRED-6x4IPS-11
8” x 2” 23.60 8.63 2.38 5.71 2.48 11.80 21.26 TRED-8x2IPS-11
8” x 3” 23.60 8.63 3.50 5.71 3.62 11.80 22.18 TRED-8x3IPS-11
8” x 4” 23.60 8.63 4.50 5.71 3.94 11.80 23.25 TRED-8x4IPS-11
8” x 6” 23.60 8.63 6.63 5.71 4.72 11.80 24.35 TRED-8x6IPS-11
10” x 4” 27.40 10.75 4.50 6.30 3.94 13.78 42.38 TRED-10x4IPS-11
10” x 6” 27.40 10.75 6.63 6.30 4.72 13.78 43.59 TRED-10x6IPS-11
10” x 8” 27.40 10.75 8.63 6.30 5.71 13.78 45.96 TRED-10x8IPS-11
12” x 6” 31.40 12.75 6.63 7.48 4.72 15.95 63.35 TRED-12x6IPS-11
12” x 8” 31.40 12.75 8.63 7.48 5.71 15.95 66.86 TRED-12x8IPS-11
12” x 10” 31.40 12.75 10.75 7.48 6.30 15.95 68.52 TRED-12x10IPS-11

16 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Wyes

C
E

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches Code
2” 23.74 5.28 13.10 2.38 0.14 2.0 WYEBI-020I-17
3” 24.56 5.90 13.10 3.50 0.21 4.2 WYEBI-030I-17
4” 28.50 5.70 20.60 4.50 0.26 7.9 WYEBI-040I-17
6” 34.65 5.30 26.00 6.63 0.39 26.3 WYEBI-060I-17
8” 37.40 5.70 27.56 8.63 0.51 44.9 WYEBI-080I-17

www.IntegrityFusion.com 17
 IntegriFuse
™

Molded Butt Fusion Wyes

C
E

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches Code
2” 23.74 5.28 13.10 2.38 0.22 2.6 WYEBI-020I-11
3” 24.56 5.90 13.10 3.50 0.32 5.3 WYEBI-030I-11
4” 28.50 5.70 20.60 4.50 0.41 10.6 WYEBI-040I-11
6” 34.45 5.52 26.00 6.63 0.60 32.0 WYEBI-060I-11
8” 37.40 5.70 27.56 8.63 0.79 54.8 WYEBI-080I-11

18 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Reducers

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D (wall) E (OD) F (OD) G (wall) Weight Item
Pipe Size inches inches inches inches inches inches inches lbs. Code
3” x 2” 7.87 3.94 2.95 0.21 2.38 3.50 0.14 0.47 REDBI-3X2IPS-17
4” x 2” 9.06 4.33 2.95 0.26 2.38 4.50 0.14 0.80 REDBI-4X2IPS-17
4” x 3” 9.06 4.33 3.94 0.26 3.50 4.50 0.21 0.94 REDBI-4X3IPS-17
6” x 3” 11.03 5.06 3.71 0.39 3.50 6.63 0.21 2.13 REDBI-6X3IPS-17
6” x 4” 11.42 5.12 4.33 0.39 4.50 6.63 0.26 2.39 REDBI-6X4IPS-17
8” x 4” 12.80 5.99 4.05 0.51 4.50 8.63 0.26 4.23 REDBI-8X4IPS-17
8” x 6” 12.80 6.10 5.12 0.51 6.63 8.63 0.39 4.92 REDBI-8X6IPS-17
10” x 6” 14.06 6.16 5.29 0.75 6.63 10.75 0.39 7.73 REDBI-10X6IPS-17
10” x 8” 14.37 6.25 5.81 0.75 8.63 10.75 0.51 10.21 REDBI-10X8IPS-17
12” x 6” 16.00 6.95 5.22 0.75 6.63 12.75 0.39 11.32 REDBI-12X6IPS-17
12” x 8” 16.54 7.09 6.10 0.75 8.63 12.75 0.51 12.82 REDBI-12X8IPS-17
12” x 10” 16.54 7.09 6.69 0.75 10.75 12.75 0.63 14.43 REDBI-12X10IPS-17

www.IntegrityFusion.com 19
 IntegriFuse
™

Molded Butt Fusion Reducers

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D (wall) E (OD) F (OD) G (wall) Weight Item
Pipe Size inches inches inches inches inches inches inches lbs. Code
1” x ¾” 4.58 2.17 2.17 0.12 1.05 1.32 0.10 0.08 REDBI-010I-075I-11
1 ¼” x 1” 4.66 2.20 2.15 0.15 1.32 1.66 0.12 0.11 REDBI-0125I-010I-11
1 ½” x 1” 5.12 2.44 2.16 0.17 1.32 1.90 0.12 0.15 REDBI-0150I-010I-11
1 ½” x 1 ¼” 4.83 2.44 2.17 0.17 1.66 1.90 0.15 0.16 REDBI-0150I-0125I-11
2” x 1” 5.62 2.53 2.13 0.22 1.32 2.38 0.12 0.23 REDBI-020I-010I-11
2” x 1 ¼” 5.34 2.53 2.15 0.22 1.66 2.38 0.12 0.25 REDBI-020I-0125I-11
2” x 1 ½” 5.40 2.53 2.42 0.22 1.90 2.38 0.15 0.26 REDBI-020I-0150I-11
3” x 2” 7.87 3.94 2.95 0.32 2.38 3.50 0.22 0.70 REDBI-3X2IPS-11
4” x 2” 9.06 4.33 2.95 0.41 2.38 4.50 0.22 1.21 REDBI-4X2IPS-11
4” x 3” 9.06 4.33 3.94 0.41 3.50 4.50 0.32 1.41 REDBI-4X3IPS-11
6” x 3” 11.03 5.06 3.71 0.60 3.50 6.63 0.32 3.18 REDBI-6X3IPS-11
6” x 4” 11.42 5.12 4.33 0.60 4.50 6.63 0.41 3.54 REDBI-6X4IPS-11
8” x 4” 12.80 5.99 4.05 0.79 4.50 8.63 0.41 6.31 REDBI-8X6IPS-11
8” x 6” 12.80 6.10 5.12 0.79 6.63 8.63 0.60 7.31 REDBI-8X6IPS-11
10” x 6” 14.06 6.16 5.29 1.16 6.63 10.75 0.60 10.28 REDBI-8X4IPS-11
10” x 8” 14.37 6.25 5.88 1.16 8.63 10.75 0.79 14.45 REDBI-10X6IPS-11
12” x 6” 16.00 6.95 5.22 1.16 6.63 12.75 0.60 16.64 REDBI-10X8IPS-11
12” x 8” 16.54 7.09 6.10 1.16 8.63 12.75 0.79 19.11 REDBI-12X6IPS-11
12” x 10” 16.54 7.09 6.69 1.16 10.75 12.75 0.98 21.66 REDBI-12X8IPS-11

20 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Reducers

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D (wall) E (OD) F (OD) G (wall) Weight Item
Pipe Size inches inches inches inches inches inches inches lbs. Code
3” x 2” 7.87 3.94 2.95 0.32 2.38 3.50 0.22 0.70 REDBI-3X2IPS-9
4” x 2” 9.06 4.33 2.95 0.41 2.38 4.50 0.22 1.21 REDBI-4X2IPS-9
4” x 3” 9.06 4.33 3.94 0.41 3.50 4.50 0.32 1.41 REDBI-4X3IPS-9
6” x 4” 11.42 5.12 4.33 0.60 4.50 6.63 0.41 3.54 REDBI-6X4IPS-9
8” x 6” 12.80 6.10 5.12 0.79 6.63 8.63 0.60 7.31 REDBI-8X6IPS-9

SDR 7 (Standard Dimension Ratio) 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D (wall) E (OD) F (OD) G (wall) Weight Item
Pipe Size inches inches inches inches inches inches inches lbs. Code
3” x 2” 7.87 3.94 2.95 0.32 2.38 3.50 0.22 0.70 REDBI-3X2IPS-7
4” x 2” 9.06 4.33 2.95 0.41 2.38 4.50 0.22 1.21 REDBI-4X2IPS-7
4” x 3” 9.06 4.33 3.94 0.41 3.50 4.50 0.32 1.41 REDBI-4X3IPS-7
6” x 4” 11.42 5.12 4.33 0.60 4.50 6.63 0.41 3.54 REDBI-6X4IPS-7
8” x 6” 12.80 6.10 5.12 0.79 6.63 8.63 0.60 7.31 REDBI-8X6IPS-7

www.IntegrityFusion.com 21
 IntegriFuse
™

Molded Butt Fusion Caps

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
2” 3.23 0.14 2.38 2.52 0.12 CAPBI-2IPS-17
3” 4.72 0.21 3.50 3.70 0.39 CAPBI-3IPS-17
4” 5.31 0.26 4.50 3.98 0.71 CAPBI-4IPS-17
6” 6.89 0.39 6.63 4.84 1.98 CAPBI-6IPS-17
8” 8.66 0.51 8.63 5.83 4.23 CAPBI-8IPS-17

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
¾” 2.55 0.10 1.05 2.18 0.04 CAPBI-0075I-11
1” 2.64 0.12 1.32 2.18 0.05 CAPBI-010I-11
1 ¼” 2.77 0.15 1.66 2.18 0.08 CAPBI-0125I-11
1 ½” 3.10 0.17 1.90 2.42 0.74 CAPBI-0150I-11
2” 3.23 0.22 2.38 2.52 0.19 CAPBI-2IPS-11
3” 4.72 0.32 3.50 3.70 0.59 CAPBI-3IPS-11
4” 5.31 0.41 4.50 3.98 1.07 CAPBI-4IPS-11
6” 6.89 0.60 6.63 4.84 2.88 CAPBI-6IPS-11
8” 8.66 0.79 8.63 5.83 6.32 CAPBI-8IPS-11

22 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Caps

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
2” 3.230 0.26 2.375 2.520 0.26 CAPBI-2IPS-9
3” 4.720 0.39 3.500 3.700 0.81 CAPBI-3IPS-9
4” 5.310 0.50 4.500 3.980 2.37 CAPBI-4IPS-9
6” 6.890 0.74 6.625 4.840 2.79 CAPBI-6IPS-9
8” 8.660 0.96 8.625 5.830 5.60 CAPBI-8IPS-9

SDR 7 (Standard Dimension Ratio) 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
2” 3.230 0.34 2.375 2.520 0.32 CAPBI-2IPS-7
3” 4.720 0.50 3.500 3.700 1.00 CAPBI-3IPS-7
4” 5.310 0.64 4.500 3.980 2.37 CAPBI-4IPS-7
6” 6.890 0.95 6.625 4.840 2.79 CAPBI-6IPS-7
8” 8.660 1.23 8.625 5.830 5.60 CAPBI-8IPS-7

www.IntegrityFusion.com 23
 IntegriFuse
™

Molded Butt Fusion Flange Adapters

SDR 17 (Standard Dimension Ratio) 125 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A (OD) B C D (length) E (wall) Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 2.38 3.94 0.55 6.10 0.14 0.37 FAI-2IPS-17
3” 3.50 5.00 0.67 6.10 0.21 0.71 FAI-3IPS-17
4” 4.50 6.61 0.79 6.10 0.26 1.27 FAI-4IPS-17
6” 6.63 8.50 1.02 8.07 0.39 3.02 FAI-6IPS-17
8” 8.63 10.63 1.02 10.67 0.51 6.02 FAI-8IPS-17
10” 10.75 12.99 1.18 11.50 0.63 10.06 FAI-10IPS-17
12” 12.75 15.75 1.38 10.83 0.75 14.17 FAI-12IPS-17
14” 14.00 17.50 1.62 12.00 0.82 26.00 FAI-14IPS-17
16” 16.00 20.00 1.85 12.00 0.94 37.00 FAI-16IPS-17
18” 18.00 21.12 2.08 12.00 1.06 43.00 FAI-18IPS-17
20” 20.00 23.50 2.31 12.00 1.18 56.00 FAI-20IPS-17
24” 24.00 28.00 2.77 14.00 1.41 79.00 FAI-24IPS-17
28” 28.00 32.30 3.23 14.00 1.65 84.00 FAI-28IPS-17
30” 30.00 34.30 3.46 14.00 1.77 87.00 FAI-30IPS-17
32” 32.00 34.30 3.69 14.00 1.88 106.00 FAI-32IPS-17
36” 36.00 40.80 4.16 14.00 2.12 141.00 FAI-36IPS-17

Beveled Flanges available upon request.

Standard 45° bevel unless otherwise requested.

24 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion Flange Adapters

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A (OD) B C D (length) E (wall) Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 2.38 3.94 0.55 6.10 0.22 0.48 FAI-2IPS-11
3” 3.50 5.00 0.67 6.10 0.32 0.93 FAI-3IPS-11
4” 4.50 6.61 0.79 6.10 0.41 1.66 FAI-4IPS-11
6” 6.63 8.50 1.02 8.07 0.60 4.07 FAI-6IPS-11
8” 8.63 10.63 1.02 10.67 0.79 8.73 FAI-8IPS-11
10” 10.75 12.99 1.18 11.50 0.98 14.11 FAI-10IPS-11
12” 12.75 15.75 1.38 10.83 1.16 19.88 FAI-12IPS-11
14” 14.00 17.50 1.62 12.00 1.27 26.00 FAI-14IPS-11
16” 16.00 20.00 1.85 12.00 1.45 37.00 FAI-16IPS-11
18” 18.00 21.12 2.08 12.00 1.64 43.00 FAI-18IPS-11
20” 20.00 23.50 2.31 12.00 1.82 56.00 FAI-20IPS-11
24” 24.00 28.00 2.77 14.00 2.18 94.00 FAI-24IPS-11
28” 28.00 32.30 3.23 14.00 2.55 129.00 FAI-28IPS-11
30” 30.00 34.30 3.46 14.00 2.73 134.00 FAI-30IPS-11
32” 32.00 34.30 3.69 14.00 2.91 163.00 FAI-32IPS-11
36” 36.00 40.80 4.16 14.00 3.27 218.00 FAI-36IPS-11

Beveled Flanges available upon request.

Standard 45° bevel unless otherwise requested.

www.IntegrityFusion.com 25
 IntegriFuse
™

Molded Butt Fusion Flange Adapters

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A (OD) B C D (length) E (wall) Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 2.38 3.94 0.55 6.10 0.26 1.00 FAI-2IPS-9
3” 3.50 5.00 0.67 6.10 0.39 2.00 FAI-3IPS-9
4” 4.50 6.61 0.79 6.10 0.50 3.00 FAI-4IPS-9
6” 6.63 8.50 1.02 8.07 0.74 7.00 FAI-6IPS-9
8” 8.63 10.63 1.02 10.67 0.96 10.00 FAI-8IPS-9
10” 10.75 12.99 1.18 11.50 1.19 19.00 FAI-10IPS-9
12” 12.75 15.75 1.38 10.83 1.42 25.00 FAI-12IPS-9

SDR 7 (Standard Dimension Ratio) 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A (OD) B C D (length) E (wall) Weight Item
Pipe Size inches inches inches inches inches lbs. Code
2” 2.38 3.94 0.55 6.10 0.34 2.00 FAI-2IPS-7
3” 3.50 5.00 0.67 6.10 0.50 3.00 FAI-3IPS-7
4” 4.50 6.61 0.79 6.10 0.64 4.00 FAI-4IPS-7
6” 6.63 8.50 1.02 8.07 0.95 8.00 FAI-6IPS-7
8” 8.63 10.63 1.02 10.67 1.23 12.00 FAI-8IPS-7

Beveled Flanges available upon request.

Standard 45° bevel unless otherwise requested.

26 www.IntegrityFusion.com
 IntegriFuse
™

SDR 11 Epoxy Coated Backup Rings

SDR 11 (Standard Dimension Ratio) 200 PSI

Nominal IPS Pressure OD ID Bolt Thickness Weight Item
PipeSize Class inches inches Holes Inches lbs. Code
2” SDR 11 6.00 2.46 4 0.55 1.8 BUR-2IPSDI-11
3” SDR 11 7.50 3.60 4 0.55 2.7 BUR-3IPSDI-11
4” SDR 11 9.00 4.60 8 0.60 3.8 BUR-4IPSDI-11
6” SDR 11 11.00 6.75 8 0.65 5.2 BUR-6IPSDI-11
8” SDR 11 13.50 8.75 8 0.80 10.0 BUR-8IPSDI-11
10” SDR 11 16.00 10.92 12 1.01 14.0 BUR-10IPSDI-11
12” SDR 11 19.00 12.92 12 1.26 23.0 BUR-12IPSDI-11
14” SDR 11 21.00 14.18 12 1.40 36.0 BUR-14IPSDI-11
16” SDR 11 23.50 16.19 16 1.66 43.0 BUR-16IPSDI-11
18” SDR 11 25.00 18.20 16 1.70 49.0 BUR-18IPSDI-11
20” SDR 11 27.50 20.38 20 1.98 60.0 BUR-20IPSDI-11
24” SDR 11 32.00 24.38 20 2.30 88.0 BUR-24IPSDI-11
28” SDR 11 36.50 28.38 28 2.11 118.0 BUR-28IPSDI-11
28” 100 PSI 36.50 28.38 28 1.73 100.0 BUR-28IPSDI-100
30” SDR 11 38.75 30.50 28 2.60 145.0 BUR-30IPSDI-11
32” SDR 11 41.75 32.50 28 2.75 175.0 BUR-32IPSDI-11
36” SDR 11 46.00 36.50 32 3.10 235.0 BUR-36IPSDI-11

www.IntegrityFusion.com 27
 IntegriFuse
™

SDR 7 - SDR 9 Epoxy Coated Backup Rings

SDR 7 (Standard Dimension Ratio) 335 PSI

SDR 9 (Standard Dimension Ratio) 255 PSI
Nominal IPS Pressure OD ID Bolt Thickness Weight Item
PipeSize Class inches inches Holes Inches lbs. Code
2” SDR 7 6.00 2.46 4 0.70 2.5 BUR-2IPSDI-7
3” SDR 7 7.50 3.60 4 0.82 4.5 BUR-3IPSDI-7
4” SDR 7 9.00 4.60 8 0.82 6.0 BUR-4IPSDI-7
6” SDR 7 11.00 6.75 8 0.85 8.3 BUR-6IPSDI-7
8” SDR 7 13.50 8.75 8 0.93 12.5 BUR-8IPSDI-7
10” SDR 7 16.00 10.92 12 0.97 16.2 BUR-10IPSDI-7
12” SDR 7 19.00 12.92 12 1.02 22.7 BUR-12IPSDI-7
14” SDR 7 21.00 14.18 12 1.35 44.0 BUR-14IPSDI-7
16” SDR 7 23.50 16.19 16 1.40 54.0 BUR-16IPSDI-7
18” SDR 7 25.00 18.20 16 1.53 50.0 BUR-18IPSDI-7
20” SDR 9 27.50 20.38 20 1.83 70.0 BUR-20IPSDI-9
24” SDR 9 32.00 24.38 20 1.71 90.0 BUR-24IPSDI-9

28 www.IntegrityFusion.com
 IntegriFuse
™

SDR 11 316 Stainless Steel Backup Rings

SDR 11 (Standard Dimension Ratio) 200 PSI

Nominal IPS Pressure OD ID Bolt Thickness Weight Item
PipeSize Class inches inches Holes Inches lbs. Code
2” SDR 11 6.00 2.46 4 0.45 1.7 BURSS-02IPS-11
3” SDR 11 7.50 3.75 4 0.53 2.6 BURSS-03IPS-11
4” SDR 11 9.00 4.80 8 0.55 3.7 BURSS-04IPS-11
6” SDR 11 11.00 6.90 8 0.63 5.6 BURSS-06IPS-11
8” SDR 11 13.50 8.90 8 0.85 10.0 BURSS-08IPS-11
10” SDR 11 16.00 11.00 12 0.98 14.5 BURSS-10IPS-11
12” SDR 11 19.00 13.15 12 1.25 25.0 BURSS-12IPS-11
14” SDR 11 21.00 14.42 12 1.38 35.0 BURSS-14IPS-11
16” SDR 11 23.50 16.47 16 1.52 45.0 BURSS-16IPS-11
18” SDR 11 25.00 18.52 16 1.65 51.0 BURSS-18IPS-11

www.IntegrityFusion.com 29
 IntegriFuse
™

Molded Butt Fusion MJ Adapters

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

IPS - with or without SS Stiffeners

Nominal IPS SDR A B C D Weight Item
Pipe Size inches inches inches inches Code
2” 11 8.00 2.38 2.34 2.38 1.90 MJI-2IPS-11
3” 11 9.00 3.50 2.34 3.96 2.10 MJI-3IPS-11
4” 9 10.25 4.50 2.34 4.80 3.38 MJI-4IPS-9
4” 11 10.25 4.50 2.34 4.80 2.96 MJI-4IPS-11
6” 9 11.31 6.63 2.34 6.90 6.96 MJI-6IPS-9
6” 11 11.31 6.63 2.34 6.90 6.26 MJI-6IPS-11
8” 9 11.94 8.63 2.34 9.05 12.65 MJI-8IPS-9
8” 11 11.94 8.63 2.34 9.05 11.11 MJI-8IPS-11
10” 9 13.56 10.75 2.34 11.10 20.90 MJI-10IPS-9
10” 11 13.56 10.75 2.34 11.10 18.10 MJI-10IPS-11
12” 9 13.00 12.75 2.34 13.20 28.00 MJI-12IPS-9
12” 11 13.00 12.75 2.34 13.20 24.16 MJI-12IPS-11
14” 11 MJI-14IPS-11
16” 11 MJI-16IPS-11
18” 11 MJI-18IPS-11
20” 11 MJI-20IPS-11
24” 11 MJI-24IPS-11

30 www.IntegrityFusion.com
 IntegriFuse
™

Molded Butt Fusion MJ Adapters

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

DIPS - with or without SS Stiffeners

Nominal IPS SDR A B C D Weight Item
Pipe Size inches inches inches inches Code
4” 9 10.25 4.80 2.34 4.80 3.54 MJI-4DIPS-9
4” 11 10.25 4.80 2.34 4.80 3.21 MJI-4DIPS-11
6” 9 11.31 6.90 2.34 6.90 7.69 MJI-6DIPS-9
6” 11 11.31 6.90 2.34 6.90 6.83 MJI-6DIPS-11
8” 9 11.94 9.05 2.34 9.05 12.96 MJI-8DIPS-9
8” 11 11.94 9.05 2.34 9.05 11.25 MJI-8DIPS-11
10” 9 13.56 11.10 2.34 11.10 22.08 MJI-10DIPS-9
10” 11 13.56 11.10 2.34 11.10 19.93 MJI-10DIPS-11
12” 9 13.00 13.20 2.34 13.20 30.20 MJI-12DIPS-9
12” 11 13.00 13.20 2.34 13.20 25.91 MJI-12DIPS-11
14” 11 MJI-14DIPS-11
16” 11 MJI-16DIPS-11
18” 11 MJI-18DIPS-11
20” 11 MJI-20DIPS-11
24” 11 MJI-24DIPS-11

www.IntegrityFusion.com 31
 IntegriFuse
™

MJ Accessory Kits
Nominal Type Bolt Size Number Weight Item
Pipe Size of Bolts in lbs Code
2” C153 5/8” x 5” 2 6.13 MJKIT-02
3” C153 5/8” x 4.5” 4 6.70 MJKIT-03
4” C153 3/4” x 4.5” 4 7.44 MJKIT-04
6” C153 3/4” x 5” 6 11.20 MJKIT-06
8” C153 3/4” x 5” 6 12.35 MJKIT-08
10” C153 3/4” x 6” 8 17.64 MJKIT-10
12” C153 3/4” x 6” 8 19.21 MJKIT-12
14” C153 MJKIT-14
16” C153 MJKIT-16
18” C153 MJKIT-18
20” C153 MJKIT-20
24” C153 MJKIT-24

32 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion
Fittings
Specialty Fittings

Couplers

Branch Saddles

Tapping Tees

Water - 200-240 PSI @ 73° F Sustainable Max Operating Pressure

Gas - 150 PSI @ 73° F Sustainable Max Operating Pressure

Designed for use on IPS SDR 11-17 Only

Engineered for PE 2406, PE3408, PE4710, PE100 HDPE Pipe Systems

Suitable for Water, Gas, Fluids & Slurry’s

Manufactured in accordance with ASTM F-714, ASTM F-1055, ASTM D-2513, ASTM
D-3035. ASTM D-3350, AWWA C-901, AWWA C-906, DIN 16963, EN 1555, EN 12201
All IntegriFuse EF Fittings use 4.0mm Pins
www.IntegrityFusion.com 33
 Integri Fuse
™

SDR 11 Water - 200 - 240 PSI / Gas - 150 PSI @ 73° F

Sustainable Maximum Operating Pressure
Electrofusion Couplers Designed for use on
IPS Series IPS SDR 9 - SDR 17 HDPE Pipe Only

Type A Type B

Nominal IPS Pipe OD D L Unit Weight

TYPE Item Code
Size inches inches inches in lbs.
½" IPS 0.84 1.34 2.83 0.06 A CI-0050IPS-240
¾" IPS 1.05 1.57 2.83 0.11 A CI-0075IPS-240
1" IPS 1.32 1.81 3.15 0.45 A CI-01IPS-240
1 ¼" IPS 1.66 2.17 3.39 0.50 A CI-0125IPS-240
1 ½" IPS 1.90 2.52 3.86 0.50 A CI-0150IPS-240
2" IPS 2.37 3.07 4.21 0.67 A CI-02IPS-240
3" IPS 3.50 4.41 5.79 1.40 A CI-03IPS-240
4" IPS 4.50 5.51 6.30 2.43 A CI-04IPS-240
5" IPS 5.56 6.85 6.73 5.75 A CI-05IPS-240
6" IPS 6.63 8.11 7.28 5.75 B CI-06IPS-240
8" IPS 8.63 10.63 8.03 9.40 B CI-08IPS-240
10" IPS 10.75 13.28 8.66 17.00 B CI-10IPS-240
12" IPS 12.75 15.75 9.60 20.00 B CI-12IPS-240
14" IPS (1) 14.00 17.29 10.00 30.00 B CI-14IPS-240
16" IPS (1) 16.00 19.76 11.81 39.81 B CI-16IPS-240
18" IPS (1) 18.00 22.24 12.60 52.04 B CI-18IPS-240
20" IPS (1) 20.00 24.71 14.41 82.29 B CI-20IPS-240
22" IPS (1) 22.00 27.18 15.70 108.88 B CI-22IPS-240
24" IPS (1)(2) 24.00 29.65 15.70 131.86 B CI-24IPS-240
26" IPS (1)(2) 26.00 32.12 17.50 132.72 B CI-26IPS-240
28" IPS (1)(2) 28.00 34.59 17.52 198.58 B CI-28IPS-240
30" IPS (1)(2) 30.00 37.06 17.52 223.98 B CI-30IPS-240
32" IPS (1)(2) 32.00 39.53 18.50 257.20 B CI-32IPS-240
34" IPS (1)(2) 34.00 42.00 19.69 318.26 B CI-34IPS-240
36" IPS (1)(2) 36.00 44.47 19.69 310.57 B CI-36IPS-240

(1) Separate fusion zones

(2) Requires the IntegriFuse EF Processor for installation
All Fittings Available to order in CL150 & CL200

34 www.IntegrityFusion.com
 Integri Fuse
™

SDR 11 Water - 200 - 240 PSI / Gas - 150 PSI @ 73° F

Sustainable Maximum Operating Pressure
Electrofusion Couplers Designed for use on
DIPS Series DIPS SDR 9 - SDR 17 HDPE Pipe Only

Type A Type B

Nominal DIPS OD D L Unit Weight

TYPE Item Code
Pipe Size inches in inches in inches in lbs
4" 4.80 6.30 6.60 3.00 A CT-04DIPS-240
6" 6.90 8.46 7.87 5.63 B CT-06DIPS-240
8" 9.05 10.60 8.05 10.12 B CT-08DIPS-240
10" 11.10 13.00 8.66 16.00 B CT-10DIPS-240
12" 13.20 15.35 9.06 30.00 B CT-12DIPS-240
14" DIPS (1) 15.30 18.30 11.80 44.00 B CT-14DIPS-240
16" DIPS (1) 17.40 20.86 12.60 59.00 B CT-16DIPS-240
18" DIPS (1) 19.50 23.20 14.40 85.00 B CT-18DIPS-240
20" DIPS (1) 21.60 26.50 15.70 97.00 B CT-20DIPS-240
24" DIPS (1)(2) 25.80 30.50 16.50 116.00 B CT-24DIPS-240
30" DIPS (1)(2) 32.00 37.40 18.50 188.85 B CT-30DIPS-240

(1) Separate fusion zones

(2) Requires the IntegriFuse EF Processor for installation
(3) Available to order in FM CL150 & CL200

SDR 11 Water - 240 PSI / Gas - 150 PSI @ 73° F

Sustainable Maximum Operating Pressure
Electrofusion Couplers Designed for use on
CTS Series CTS SDR 9 - SDR 17 HDPE Pipe Only

Nominal IPS d & d/2 D L Unit Weight

TYPE Item Code
Pipe Size inches inches inches in lbs.
½" CTS 0.84 1.61 2.80 0.06 A CT-0050IPS-240
¾" CTS 1.05 1.61 2.80 0.11 A CT-0075IPS-240
1" CTS 1.32 1.89 3.23 0.45 A CT-01IPS-240

www.IntegrityFusion.com 35
 Integri Fuse
™

SDR 17 Water - 160 PSI / Gas -100 PSI @ 73° F

Sustainable Maximum Operating Pressure
Electrofusion Couplers Designed for use on
IPS Series IPS SDR 17 - SDR 21 HDPE Pipe Only

Nominal IPS OD D L Unit Weight

Item Code
Pipe Size inches inches inches in lbs.
18" (1) 18.00 20.77 12.60 38.21 CT-18IPS-160
20" (1) 20.00 23.08 14.41 54.75 CT-20IPS-160
22" (1) 22.00 25.38 15.70 81.97 CT-22IPS-160
24" (1) (2) 24.00 27.69 15.70 92.78 CT-24IPS-160
26" (1) (2) 26.00 30.00 17.50 120.21 CT-26IPS-160
28" (1) (2) 28.00 32.31 17.52 147.71 CT-28IPS-160
30" (1) (2) 30.00 34.62 17.52 182.95 CT-30IPS-160
32" (1) (2) 32.00 36.92 18.50 188.85 CT-32IPS-160
34" (1) (2) 34.00 39.23 19.69 186.84 CT-34IPS-160
36" (1) (2) 36.00 41.54 19.69 238.80 CT-36IPS-160
42" (1) (2) 42.00 48.03 19.69 291.02 CT-42IPS-160
48" (1) (2) 48.00 55.12 20.67 413.04 CT-48IPS-160
54" (1) (2) 54.00 62.99 21.65 620.18 CT-54IPS-160
63" (1) (2) 63.00 72.01 22.64 749.53 CT-63IPS-160

(1) Separate fusion zones

(2) Requires the IntegriFuse EF Processor for installation

36 www.IntegrityFusion.com
 Integri Fuse
™

SDR 26 Water - 100 PSI / Gas - 60 PSI @73° F

Sustainable Maximum Operating Pressure
Electrofusion Couplers Designed for use on
IPS Series IPS SDR 21 - SDR 32.5 HDPE Pipe Only

Nominal IPS d & d/2 D L Unit Weight

TYPE Item Code
Pipe Size inches inches inches in lbs.
18" (1) (2) 18.00 20.08 9.06 25.00 B CT-18IPS-100
20" (1) 20.00 22.44 9.06 25.54 B CT-20IPS-100
22" (1) (2) 22.00 24.21 9.84 27.40 B CT-22IPS-100
24" (1) 24.00 26.77 13.78 52.79 B CT-24IPS-100
26" (1) (2) 26.00 28.74 13.78 56.27 B CT-26IPS-100
28" (1) (2) 28.00 30.71 13.78 59.66 B CT-28IPS-100
30" (1) (2) 30.00 33.07 13.78 72.66 B CT-30IPS-100
32"(1) (2) 32.00 35.43 13.78 86.85 B CT-32IPS-100
34" (1) (2) 34.00 37.40 15.75 104.13 B CT-34IPS-100
36" (1) (2) 36.00 40.55 19.69 186.72 B CT-36IPS-100
42" (1) (2) 42.00 46.46 19.69 211.28 B CT-42IPS-100
48" (1) (2) 48.00 53.15 19.69 279.16 B CT-48IPS-100
54" (1) (2) 54.00 59.06 19.69 306.29 B CT-54IPS-100
63" (1) (2) 63.00 68.90 19.69 416.89 B CT-63IPS-100

(1) Separate fusion zones

(2) Requires the IntegriFuse EF Processor for installation

www.IntegrityFusion.com 37
 Integri Fuse
™

SDR 7 Water - 380 PSI @73° F

Sustainable Maximum Operating Pressure
Electrofusion Couplers Designed for use on
IPS Series IPS SDR 7 - SDR 9 HDPE Pipe Only

Type A Type B

Nominal IPS d & d/2 D L Unit Weight

TYPE Item Code
Pipe Size inches inches inches in lbs.
2" (2) 2.38 3.82 4.65 A 1.13 CT-02IPS-380
3" (2) 3.50 5.59 6.57 A 3.40 CT-03IPS-380
4" (2) 4.50 6.26 6.77 A 3.49 CT-04IPS-380
5" (2) 5.56 8.03 7.28 A 6.65 CT-05IPS-380
6" (2) 6.68 9.13 8.35 A 8.83 CT-06IPS-380
8" (2) 8.63 12.20 8.35 B 16.94 CT-08IPS-380
10" (2) 10.75 15.35 8.82 B 28.86 CT-10IPS-380
12" (2) 12.75 17.32 9.13 B 34.20 CT-12IPS-380
14" (1) (2) 14.00 19.29 10.04 B 48.15 CT-14IPS-380
16" (1) (2) 16.00 21.77 11.81 B 70.10 CT-16IPS-380
18" (1) (2) 18.00 24.41 12.60 B 93.23 CT-18IPS-380
20" (1) (2) 20.00 27.17 14.37 B 132.22 CT-20IPS-380
22" (1) (2) 22.00 30.71 15.75 B 196.80 CT-22IPS-380

(1) Separate fusion zones

(2) Requires the IntegriFuse EF Processor for installation

38 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion 90 Degree Elbows

Nominal Unit
Base
Pipe Size L L1 Weight PSI Item Code
Norm
d in lbs.
¾” IPS 3.86 1.50 0.15 240 90EF-075-IPS
1” CTS 4.29 1.61 0.31 240 90EF-1-CTS
1” IPS 4.29 1.61 0.22 240 90EF-1-IPS
1 ¼” IPS 5.16 1.85 0.37 240 90EF-125-IPS
1 ½” IPS 6.10 2.01 0.62 240 90EF-150-IPS
2” IPS 7.44 1.89 1.15 240 90EF-2-IPS
3” IPS 9.53 2.76 2.45 240 90EF-3-IPS
4” IPS 11.69 3.23 6.61 240 90EF-4-IPS
6” IPS 13.19 3.94 9.19 220 90EF-6-IPS
8” IPS 19.69 4.13 33.80 220 90EF-8-IPS

www.IntegrityFusion.com 39
 Integri Fuse
™

Electrofusion 45 Degree Elbows

Nominal
Base Unit Weight
Pipe Size L L1 PSI Item Code
Norm in lbs.
d
¾” IPS
1” CTS 4.57 1.61 0.18 240 45EF-1-CTS
1” IPS 4.57 1.61 0.18 240 45EF-1-IPS
1 ¼” IPS 5.47 1.85 0.29 240 45EF-125-IPS
1 ½” IPS 6.54 2.01 0.51 240 45EF-150-IPS
2” IPS 7.76 2.28 0.88 240 45EF2-IPS
3” IPS 9.53 2.83 2.07 240 45EF-3-IPS
4” IPS 11.89 3.23 5.71 240 45EF-4-IPS
6” IPS 14.17 3.94 8.64 220 45EF-6-IPS
8” IPS 25.47 4.13 28.80 220 45EF-8-IPS

40 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion Tees

Nominal
Base Weight
Pipe Size L L1 PSI Item Code
Norm in lbs.
(d)
¾” IPS 4.25 1.46 1.59 240 TEF-075-IPS
1” CTS 5.04 1.61 0.29 240 TEF-1-CTS
1” IPS 5.04 1.61 0.29 240 TEF-1-IPS
1 ¼” IPS 5.79 1.93 0.37 240 TEF-125-IPS
1 ½” IPS 6.38 1.93 0.68 240 TEF-125-IPS
2" IPS 7.32 2.40 1.26 240 TEF-2-IPS
3" IPS 10.04 2.91 3.26 240 TEF-3-IPS
4" IPS 11.93 3.11 5.86 240 TEF-4-IPS
6” IPS 12.89 6.70 17.85 240 TEF-6-IPS
8” IPS 18.11 7.48 43.85 240 TEF-8-IPS

www.IntegrityFusion.com 41
 Integri Fuse
™

Electrofusion Reducers

Nominal Unit Weight Item

L PSI
Pipe Size d1 x d2 in lbs. Code
1" IPS X ½" IPS 3.54 0.11 240 REF-1X050-IPSXIPS
1" IPS X ¾" CTS 3.54 0.11 240 REF-1X075-IPSXCTS
1" IPS X ¾" IPS 3.54 0.12 240 REF-1X075-IPSXIPS
1 ¼" IPS X 1" IPS 4.61 0.20 240 REF-125X1-IPSXIPS
1 ½" IPS X 1" IPS 5.16 0.33 240 REF-150X1-IPSXIPS
2" IPS X 1" IPS 5.59 0.49 240 REF-2X1-IPSXIPS
2" IPS X 1 ¼" IPS 5.47 0.54 240 REF-2X125-IPSXIPS
2" IPS X 1 ½" IPS 5.98 0.58 240 REF-2X150-IPSXIPS
3" IPS X 2" IPS 7.48 1.30 240 REF-3X2-IPSXIPS
4" IPS X 2" IPS 8.23 1.95 240 REF-4X2-IPSXIPS
4" IPS X 3" IPS 8.46 2.41 240 REF4X3-IPSXIPS

42 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion Flex Restraints

Nominal Base Axial H L W Unit Weight Item

BaseSize Norm Resistance in lbs. Code
6" - 63" IPS/DIPS 9,500 lbs. 1.58 5.98 2.50 0.42 FLEX-EF

6” IPS/DIPS - 10” IPS/DIPS fusible to SDR 9 - SDR 17

12” IPS/DIPS - 63” IPS fusible to SDR 9 to SDR 26

www.IntegrityFusion.com 43
 Integri Fuse
™

Electrofusion Branch Saddles

A B C D E

OUTLET OUTLET BASE BASE Weight

L TYPE PSI Item Code
(d) NORM (D) NORM in lbs
1” IPS 2” IPS 3.03 0.86 A 240 BST-2X1-IPSXIPS
1” IPS 3” IPS 3.74 1.52 A 240 BST-3X1-IPSXIPS
1” IPS 4” IPS 3.74 1.65 A 240 BST-4X1-IPSXIPS
1” IPS 6” IPS 3.74 2.09 C 240 BST-6X1-IPSXIPS
1” IPS 8” IPS 3.74 2.03 D 240 BST-8X1-IPSXIPS
1” IPS 10” IPS 3.94 1.48 D 240 BST-10X1-IPSXIPS
1” IPS 12” IPS 5.12 1.52 D 240 BST-12X1-IPSXIPS
1” IPS 14” IPS 5.12 1.72 D 240 BST-14X1-IPSXIPS
1” IPS 16” IPS 5.12 0.99 D 240 BST-16X1-IPSXIPS
1” IPS 18” IPS 5.12 0.99 D 240 BST-18X1-IPSXIPS
1” IPS 4” DIPS 3.74 1.68 B 240 BST-4X1-DIPSXIPS
1” IPS 6” DIPS 3.74 2.12 C 240 BST-6X1-DIPSXIPS
1" IPS 8" DIPS 5.12 2.03 D 240 BST-8X1-DIPSXIPS
1" IPS 10" DIPS 5.12 1.48 D 240 BST-10X1-DIPSXIPS
1" IPS 12" DIPS 5.12 1.72 D 240 BST-12X1-DIPSXIPS
1" IPS 14" DIPS 5.12 0.99 D 240 BST-14X1-DIPSXIPS
1" IPS 16" DIPS 5.12 0.99 D 240 BST-16X1-DIPSXIPS
1 ¼" IPS 2" IPS 3.03 0.88 A 240 BST-2X125-IPSXIPS
1 ¼” IPS 3" IPS 3.74 1.54 A 240 BST-3X125-IPSXIPS
1 ¼” IPS 4" IPS 3.74 1.68 A 240 BST-4X125-IPSXIPS
1 ¼” IPS 2" IPS 4.92 1.65 A 240 BST-2X150-IPSXIPS
1 ½" IPS 3" IPS 5.31 1.57 A 240 BST-3X150-IPSXIPS
1 ½” IPS 4" IPS 5.31 1.70 A 240 BST-4X150-IPSXIPS
1 ½” IPS 6" IPS 5.31 2.18 C 240 BST-6X150-IPSXIPS
1 ½” IPS 8" IPS 5.31 2.07 D 240 BST-8X150-IPSXIPS
2" IPS 2" IPS 4.92 1.76 A 240 BST-2X02-IPSXIPS
2" IPS 3" IPS 5.31 1.59 A 240 BST-3X2-IPSXIPS
2" IPS 4" IPS 5.31 1.72 A 240 BST-4X2-IPSXIPS

44 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion Branch Saddles

A B C D E

OUTLET OUTLET BASE BASE Weight

L TYPE PSI Item Code
(d) NORM (D) NORM in lbs
2" IPS 6" IPS 5.31 2.20 C 240 BST-6X2-IPSXIPS
2" IPS 8" IPS 5.31 2.09 D 240 BST-8X2-IPSXIPS
2" IPS 10" IPS 4.92 1.54 D 240 BST-10X2-IPSXIPS
2" IPS 12" IPS 4.92 1.54 D 240 BST-12X2-IPSXIPS
2" IPS 14" IPS 4.92 1.72 D 240 BST-14X2-IPSXIPS
2" IPS 16" IPS 4.92 1.15 D 240 BST-16X2-IPSXIPS
2" IPS 18" IPS 4.92 1.15 D 240 BST-18X2-IPSXIPS
2" IPS 20" IPS 4.92 1.15 D 240 BST-20X2-IPSXIPS
2" IPS 22" IPS 4.92 1.15 D 240 BST-22X2-IPSXIPS
2" IPS 24" IPS 4.92 1.15 D 240 BST-24X2-IPSXIPS
2" IPS 26" IPS 4.92 1.15 D 240 BST-26X2-IPSXIPS
2" IPS 28" IPS 4.92 1.15 D 240 BST-28X2-IPSXIPS
2" IPS 30" IPS 4.92 1.15 D 240 BST-30X2-IPSXIPS
2" IPS 32" IPS 4.92 1.15 D 240 BST-32X2-IPSXIPS
2" IPS 36" IPS 4.92 1.15 D 240 BST-36X2-IPSXIPS
2" IPS 4" DIPS 5.31 1.76 B 240 BST-4X2-DIPSXIPS
2" IPS 6" DIPS 5.31 2.23 C 240 BST-6X2-DIPSXIPS
2" IPS 8" DIPS 4.92 2.09 D 240 BST-8X2-DIPSXIPS
2" IPS 10" DIPS 4.92 1.46 D 240 BST-10X2-DIPSXIPS
2" IPS 12" DIPS 4.92 1.72 D 240 BST-12X2-DIPSXIPS
2" IPS 14" DIPS 4.92 1.15 D 240 BST-14X2-DIPSXIPS
2" IPS 16" DIPS 4.92 1.15 D 240 BST-16X2-DIPSXIPS
3" IPS 3" IPS 3.54 1.32 E 200 BST-03X03-IPSXIPS
3" IPS 4" IPS 3.54 1.32 E 240 BST-04X03-IPSXIPS
3" IPS 5" IPS 3.54 1.32 E 240 BST-05X03-IPSXIPS
3" IPS 6" IPS 3.54 1.32 E 240 BST-06X03-IPSXIPS
3" IPS 8" IPS 3.54 1.32 E 240 BST-08X03-IPSXIPS
3" IPS 10" IPS 3.54 1.32 E 240 BST-10X03-IPSXIPS

www.IntegrityFusion.com 45
 Integri Fuse
™

Electrofusion Branch Saddles

A B C D E

OUTLET OUTLET BASE BASE Weight

L TYPE PSI Item Code
(d) NORM (D) NORM in lbs
3" IPS 12" IPS 3.54 1.32 E 240 BST-12X03-IPSXIPS
3" IPS 14" IPS 3.54 1.32 E 240 BST-14X03-IPSXIPS
3" IPS 16" IPS 3.54 1.32 E 240 BST-16X03-IPSXIPS
3" IPS 18" IPS 3.54 1.32 E 240 BST-18X03-IPSXIPS
3" IPS 20" IPS 3.54 1.32 E 240 BST-20X03-IPSXIPS
3" IPS 22" IPS 3.54 1.32 E 240 BST-22X03-IPSXIPS
3" IPS 24" IPS 3.54 1.32 E 240 BST-24X03-IPSXIPS
3" IPS 30" IPS 3.54 1.32 E 240 BST-30X03-IPSXIPS
3" IPS 32" IPS 3.54 1.32 E 240 BST-32X03-IPSXIPS
3" IPS 36" IPS 3.54 1.32 E 240 BST-36X03-IPSXIPS
3" IPS 42" IPS 3.54 1.32 E 240 BST-42X03-IPSXIPS
3" IPS 48" IPS 3.54 1.32 E 240 BST-48X03-IPSXIPS
3" IPS 54" IPS 3.54 1.32 E 240 BST-54X03-IPSXIPS
3" IPS 63" IPS 3.54 1.32 E 240 BST-63X03-IPSXIPS
4" IPS 4" IPS 3.54 1.32 E 200 BST-04X04-IPSXIPS
4" IPS 5" IPS 3.54 2.65 E 240 BST-05X04-IPSXIPS
4" IPS 6" IPS 3.54 2.65 E 240 BST-06X04-IPSXIPS
4" IPS 8" IPS 3.54 2.65 E 240 BST-08X04-IPSXIPS
4" IPS 10" IPS 3.54 2.65 E 240 BST-10X04-IPSXIPS
4" IPS 12" IPS 3.54 2.65 E 240 BST-12X04-IPSXIPS
4" IPS 14" IPS 3.54 2.65 E 240 BST-14X04-IPSXIPS
4" IPS 16" IPS 3.54 2.65 E 240 BST-16X04-IPSXIPS
4" IPS 18" IPS 3.54 2.65 E 240 BST-18X04-IPSXIPS
4" IPS 20" IPS 3.54 2.65 E 240 BST-20X04-IPSXIPS
4" IPS 22" IPS 3.54 2.65 E 240 BST-22X04-IPSXIPS
4" IPS 24" IPS 3.54 2.65 E 240 BST-24X04-IPSXIPS
4" IPS 30" IPS 3.54 2.65 E 240 BST-30X04-IPSXIPS
4" IPS 32" IPS 3.54 2.65 E 240 BST-32X04-IPSXIPS
4" IPS 36" IPS 3.54 2.65 E 240 BST-36X04-IPSXIPS

46 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion Branch Saddles

A B C D E

OUTLET OUTLET BASE BASE Weight

L TYPE PSI Item Code
(d) NORM (D) NORM in lbs
4" IPS 42" IPS 3.54 2.65 E 240 BST-42X04-IPSXIPS
4" IPS 48" IPS 3.54 2.65 E 240 BST-48X04-IPSXIPS
4" IPS 54" IPS 3.54 2.65 E 240 BST-54X04-IPSXIPS
4" IPS 63" IPS 3.54 2.65 E 240 BST-63X04-IPSXIPS
4" DIPS 6" DIPS 3.54 2.65 E 240 BST-06X04-DIPSXDIPS
4" DIPS 8" DIPS 3.54 2.65 E 240 BST-08X04-DIPSXDIPS
4" DIPS 10" DIPS 3.54 2.65 E 240 BST-10X04-DIPSXDIPS
4" DIPS 12" DIPS 3.54 2.65 E 240 BST-12X04-DIPSXDIPS
4" DIPS 14" DIPS 3.54 2.65 E 240 BST-14X04-DIPSXDIPS
4" DIPS 16" DIPS 3.54 2.65 E 240 BST-16X04-DIPSXDIPS
4" DIPS 18" DIPS 3.54 2.65 E 240 BST-18X04-DIPSXDIPS
4" DIPS 24" DIPS 3.54 2.65 E 240 BST-24X04-DIPSXDIPS
4" DIPS 30" DIPS 3.54 2.65 E 240 BST-30X04-DIPSXDIPS
4" DIPS 36" DIPS 3.54 2.65 E 240 BST-36X04-DIPSXDIPS
4" DIPS 42" DIPS 3.54 2.65 E 240 BST-42X04DIPSXDIPS
4" DIPS 48" DIPS 3.54 2.65 E 240 BST-48X04DIPSXDIPS
6" IPS 6" IPS 4.33 3.97 E 240 BST-06X06-IPSXIPS
6" IPS 8" IPS 5.91 5.07 E 240 BST-08X06-IPSXIPS
6" IPS 10" IPS 5.91 5.07 E 240 BST-10X06-IPSXIPS
6" IPS 12" IPS 5.91 5.07 E 240 BST-12X06-IPSXIPS
6" IPS 14" IPS 5.91 3.07 E 240 BST-14X06-IPSXIPS
6" IPS 16" IPS 5.91 5.07 E 240 BST-16X06-IPSXIPS
6" IPS 18" IPS 5.91 5.07 E 240 BST-18X06-IPSXIPS
6" IPS 20" IPS 5.91 5.07 E 240 BST-20X06-IPSXIPS
6" IPS 22" IPS 5.91 5.07 E 240 BST-22X06-IPSXIPS
6" IPS 24" IPS 5.91 5.07 E 240 BST-24X06-IPSXIPS
6" IPS 30" IPS 5.91 5.07 E 240 BST-30X06-IPSXIPS
6" IPS 32" IPS 5.91 5.07 E 240 BST-32X06-IPSXIPS
6" IPS 36" IPS 5.91 5.07 E 240 BST-36X06-IPSXIPS

www.IntegrityFusion.com 47
 Integri Fuse
™

Electrofusion Branch Saddles

A B C D E

OUTLET OUTLET BASE BASE Weight

L TYPE PSI Item Code
(d) NORM (D) NORM in lbs
6" IPS 42" IPS 5.91 5.07 E 240 BST-42X06-IPSXIPS
6" IPS 48" IPS 5.91 5.07 E 240 BST-48X06-IPSXIPS
6" IPS 54" IPS 5.91 5.07 E 240 BST-54X06-IPSXIPS
6" IPS 63" IPS 5.91 5.07 E 240 BST-63X06-IPSXIPS
6" DIPS 8" DIPS 5.91 5.07 E 240 BST-08X06-DIPSXDIPS
6" DIPS 10" DIPS 5.91 5.07 E 240 BST-10X06-DIPSXDIPS
6" DIPS 12" DIPS 5.91 5.07 E 240 BST-12X06-DIPSXDIPS
6" DIPS 14" DIPS 5.91 5.07 E 240 BST-14X06-DIPSXDIPS
6" DIPS 16" DIPS 5.91 5.07 E 240 BST-16X06-DIPSXDIPS
6" DIPS 18" DIPS 5.91 5.07 E 240 BST-18X06-DIPSXDIPS
6" DIPS 20" DIPS 5.91 5.07 E 240 BST-20X06-DIPSXDIPS
6" DIPS 24" DIPS 5.91 5.07 E 240 BST-24X06-DIPSXDIPS
6" DIPS 30" DIPS 5.91 5.07 E 240 BST-30X06-DIPSXDIPS
6" DIPS 36" DIPS 5.91 5.07 E 240 BST-36X06-DIPSXDIPS
6" DIPS 42" DIPS 5.91 5.07 E 240 BST-42X06DIPSXDIPS
6" DIPS 48" DIPS 5.91 5.07 E 240 BST-48X06DIPSXDIPS
8" IPS 8" IPS 5.91 5.07 E 240 BST-08X08-IPSXIPS
8" IPS 10" IPS 5.91 9.92 E 240 BST-10X08-IPSXIPS
8" IPS 12" IPS 5.91 9.92 E 240 BST-12X08-IPSXIPS
8" IPS 14" IPS 5.91 9.92 E 240 BST-14X08-IPSXIPS
8" IPS 16" IPS 5.91 9.92 E 240 BST-16X08-IPSXIPS
8" IPS 18" IPS 5.91 9.92 E 240 BST-18X08-IPSXIPS
8" IPS 20" IPS 5.91 9.92 E 240 BST-20X08-IPSXIPS
8" IPS 22" IPS 5.91 9.92 E 240 BST-22X08-IPSXIPS
8" IPS 24" IPS 5.91 9.92 E 240 BST-24X08-IPSXIPS
8" IPS 30" IPS 5.91 9.92 E 240 BST-30X08-IPSXIPS
8" IPS 32" IPS 5.91 9.92 E 240 BST-32X08-IPSXIPS
8" IPS 36" IPS 5.91 9.92 E 240 BST-36X08-IPSXIPS
8" IPS 42" IPS 5.91 9.92 E 240 BST-42X08--IPSXIPS

48 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion Branch Saddles

A B C D E

OUTLET OUTLET BASE BASE Weight

L TYPE PSI Item Code
(d) NORM (D) NORM in lbs
8" IPS 48" IPS 5.91 9.92 E 240 BST-48X08-IPSXIPS
8" IPS 54" IPS 5.91 9.92 E 240 BST-54X08-IPSXIPS
8" IPS 63" IPS 5.91 9.92 E 240 BST-63X08-IPSXIPS
8" (2) DIPS 10" DIPS 5.91 5.07 E 240 BST-10X08-DIPSXDIPS
8" (2) DIPS 12" DIPS 5.91 5.07 E 240 BST-12X08-DIPSXDIPS
8" (2) DIPS 14" DIPS 5.91 5.07 E 240 BST-14X08-DIPSXDIPS
8" (2) DIPS 16" DIPS 5.91 5.07 E 240 BST-16X08-DIPSXDIPS
8" (2) DIPS 18" DIPS 5.91 5.07 E 240 BST-18X08-DIPSXDIPS
8" (2) DIPS 20" DIPS 5.91 5.07 E 240 BST-20X08-DIPSXDIPS
8" (2) DIPS 24" DIPS 5.91 5.07 E 240 BST-24X08-DIPSXDIPS
8" (2) DIPS 36" DIPS 5.91 5.07 E 240 BST-36X08-DIPSXDIPS
8" (2) DIPS 42" DIPS 5.91 5.07 E 240 BST-42X08DIPSXDIPS
8" (2) DIPS 48" DIPS 5.91 18.74 E 240 BST-48X08DIPSXDIPS

(2) Requires the IntegriFuse

EF Processor for installation

www.IntegrityFusion.com 49
 Integri Fuse
™

Threaded Outlet Electrofusion Branch Saddles

The following IntegriFuse Transitions are available to press

on to saddles in Male (MPT) or Female (FPT)

Epoxy Coated Carbon Brass

304 Stainless Steel 316 Stainless Steel

CC Threads / Corp Saddles Also Available to Order

Integri Fuse
™

50 www.IntegrityFusion.com
 Integri Fuse
™

Electrofusion Tapping Tees

OUTLET OUTLET BASE Unit Weight

BASE (D) H L TYPE Item Code
(d) NORM NORM in lbs
½" CTS 2" IPS 4.13 2.05 1.23 A TTT-2X050-IPSXCTS
½” CTS 3" IPS 5.31 1.85 2.16 A TTT-3X050-IPSXCTS
½” CTS 4" IPS 5.31 1.89 2.27 A TTT-4X050-IPSXCTS
½” CTS 6" IPS 5.31 2.01 2.91 C TTT-6X050-IPSXCTS
½” CTS 8" IPS 5.31 2.01 2.91 D TTT-8X050-IPSXCTS
¾" IPS 2" IPS 4.13 2.13 1.27 A TTT-2X075-IPSXIPS
¾” CTS 3" IPS 5.31 1.85 2.16 A TTT-3X075-IPSXCTS
¾” IPS 3" IPS 5.31 2.05 2.18 A TTT-3X075-IPSXIPS
¾” CTS 4" IPS 5.31 1.89 2.27 A TTT-4X075-IPSXCTS
¾” IPS 4" IPS 5.31 2.17 2.29 A TTT-4X075-IPSXIPS
¾” CTS 6" IPS 5.31 2.01 2.91 C TTT-6X075-IPSXCTS
¾” IPS 6" IPS 5.31 1.89 2.83 C TTT-6X075-IPSXIPS
¾” CTS 8" IPS 5.31 2.01 2.91 D TTT-8X075-IPSXCTS
¾” IPS 8" IPS 5.31 1.89 2.69 D TTT-8X075-IPSXIPS
¾” CTS 4" DIPS 5.31 1.89 2.27 A TTT-4X075-DIPSXCTS
¾” IPS 4" DIPS 5.31 2.17 2.29 A TTT-4X075-DIPSXIPS
¾” CTS 6" DIPS 5.31 2.01 2.91 C TTT-6X075-DIPSXCTS
¾” IPS 6" DIPS 5.31 1.89 2.69 C TTT-6X075-DIPSXIPS
¾” CTS 8" DIPS 5.31 2.01 2.91 D TTT-8X075-DIPSXCTS
¾” IPS 8" DIPS 5.31 1.89 2.69 D TTT-8X075-DIPSXIPS
1" CTS 2" IPS 4.13 2.13 1.30 A TTT-2X1-IPSXCTS
1" IPS 2" IPS 4.13 3.35 1.30 A TTT-2X1-IPSXIPS
1" CTS 3" IPS 5.31 2.05 2.18 A TTT-3X1-IPSXCTS
1" IPS 3" IPS 5.31 2.52 2.20 A TTT-3X1-IPSXIPS

www.IntegrityFusion.com 51
 Integri Fuse
™

Electrofusion Tapping Tees

OUTLET OUTLET BASE Unit Weight

BASE (D) H L TYPE Item Code
(d) NORM NORM in lbs
1" CTS 4" IPS 5.31 2.17 2.29 A TTT-4X1-IPSXCTS
1" IPS 4" IPS 5.31 2.68 2.36 A TTT-4X1-IPSXIPS
1" CTS 6" IPS 5.31 1.89 2.83 C TTT-6X1-IPSXCTS
1" IPS 6" IPS 5.31 3.27 2.82 C TTT-6X1-IPSXIPS
1" CTS 8" IPS 5.31 1.89 2.69 D TTT-8X1-IPSXCTS
1" IPS 8" IPS 5.31 3.27 2.65 D TTT-8X1-IPSXIPS
1" CTS 4" DIPS 5.31 2.17 2.29 A TTT-4X1-DIPSXCTS
1" IPS 4" DIPS 5.31 2.68 2.36 A TTT-4X1-DIPSXIPS
1" CTS 6" DIPS 5.31 1.89 2.69 C TTT-6X1-DIPSXCTS
1" IPS 6" DIPS 5.31 3.27 2.65 C TTT-6X1-DIPSXIPS
1" CTS 8" DIPS 5.31 1.89 2.69 D TTT-8X1-DIPSXCTS
1" IPS 8" DIPS 5.31 3.27 2.65 D TTT-8X1-DIPSXIPS
1 ¼" IPS 2" IPS 4.13 3.54 1.30 A TTT-2X125-IPSXIPS
1 ¼" IPS 3" IPS 5.31 3.50 2.23 A TTT-3X125-IPSXIPS
1 ¼" IPS 4" IPS 5.31 2.76 2.38 A TTT-4X125-IPSXIPS
1 ½" IPS 4" IPS 5.31 2.95 3.31 A TTT-4X150-IPSXIPS
2" IPS 2" IPS 7.87 4.17 2.65 A TTT-2X2-IPSXIPS
2" IPS 3" IPS 7.09 4.33 3.28 A TTT-3X2-IPSXIPS
2" IPS 4" IPS 7.09 2.95 3.31 A TTT-4X2-IPSXIPS
2" IPS 6" IPS 7.09 4.33 4.01 C TTT-6X2-IPSXIPS
2" IPS 8" IPS 7.09 4.45 3.79 D TTT-8X2-IPSXIPS

52 www.IntegrityFusion.com
Integri Fuse
™

Socket Fusion
90 Degree Elbows

Tees

Reducers

Couplers

Caps

Socket x Brass Transitions

IntegriFuse Socket Fusion Kit

www.IntegrityFusion.com 53
 Integri Fuse
™

Molded Socket Fusion 90 Degree Elbows

SDR 11 - 7 (Standard Dimension Ratio) up to 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
¾” 0.75 1.50 1.63 2.38 0.11 90SK-075
1” 0.77 1.83 1.69 2.61 0.16 90SK-100
1 ¼” 0.95 2.27 2.09 3.23 0.27 90SK-125
1 ½” 0.98 2.63 2.33 3.65 0.41 90SK-150
2” 1.00 3.28 2.73 4.37 0.73 90SK-200

IntegriFuse
™

Molded Socket Fusion Tees

SDR 11 - 7 (Standard Dimension Ratio) up to 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
¾” 0.73 1.49 1.63 3.25 0.14 TEESK-075
1” 0.75 1.84 1.69 3.41 0.21 TEESK-100
1 ¼” 0.98 2.30 2.10 4.22 0.38 TEESK-125
1 ½” 0.97 2.65 2.34 4.67 0.55 TEESK-150
2” 0.97 3.26 2.78 5.40 0.99 TEESK-200

www.IntegrityFusion.com 55
 Integri Fuse
™

Molded Socket Fusion Reducers

SDR 11 - 7 (Standard Dimension Ratio) up to 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C D E Weight Item
Pipe Size inches inches inches inches inches lbs. Code
1” x ¾” 0.75 1.83 0.68 1.46 1.98 0.08 REDSK-1X075
1 ¼” x ¾” 1.00 2.26 0.72 1.46 2.18 0.13 REDSK-125X075
1 ¼” x 1” 0.96 2.26 0.81 1.83 2.27 0.15 REDSK-125X1
1 ½” x 1” 0.96 2.56 0.77 1.84 2.15 0.15 REDSK-150X1
1 ½” x 1 ¼” 0.97 2.56 0.95 2.30 2.16 0.18 REDSK-150X125
2” x 1” 0.99 3.27 0.76 1.83 2.52 0.27 REDSK-2X1
2” x 1 ¼” 1.00 3.28 0.96 2.28 2.55 0.29 REDSK-2X125
2” x 1 ½” 0.99 3.27 0.97 2.55 2.56 0.30 REDSK-2X150

IntegriFuse
™

Molded Socket Fusion Couplers

SDR 11 - 7 (Standard Dimension Ratio) up to 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS B C Weight Item
Pipe Size inches inches lbs. Code
¾” 1.46 2.19 0.07 CPLSK-075
1” 1.82 2.20 0.11 CPLSK-100
1 ¼” 2.27 2.19 0.15 CPLSK-125
1 ½” 2.55 2.18 0.19 CPLSK-150
2” 3.27 2.36 0.34 CPLSK-200

56 www.IntegrityFusion.com
 Integri Fuse
™

Molded Socket Fusion Caps

SDR 11 - 7 (Standard Dimension Ratio) up to 335 PSI (Working Pressure at 73.4˚ F)

Nominal IPS A B C Weight Item
Pipe Size inches inches inches lbs. Code
¾” 0.74 1.45 1.56 0.05 CAPSK-075
1” 0.78 1.83 1.78 0.08 CAPSK-100
1 ¼” 0.98 2.28 2.23 0.16 CAPSK-125
1 ½” 0.98 2.55 2.00 0.17 CAPSK-150
2” 0.99 3.28 2.23 0.30 CAPSK-200

www.IntegrityFusion.com 57
 IntegriFuse
™

Molded Socket x Brass Transitions

A B

C
D

Male Socket x Brass Transitions

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
¾”
1” 2.14 1.77 2.06 2.78 0.58 TRANMSBRI-01
1 ¼” 2.59 2.20 2.09 3.54 0.80 TRANMSBRI-0125
1 ½”
2” 3.67 3.50 2.35 4.12 1.66 TRANMSBRI-02

Female Socket x Brass Transitions

Nominal IPS A B C D Weight Item
Pipe Size inches inches inches inches lbs. Code
¾”
1” 2.14 1.77 2.06 2.04 0.36 TRANFSBRI-01
1 ¼” 2.59 2.20 2.09 2.68 0.65 TRANFSBRI-0125
1 ½”
2” 3.67 3.50 2.35 3.09 1.24 TRANFSBRI-02
Integri Fuse
™

Transition Fittings

Supertech
ID Controlled

Threaded
Weld End
Grooved End

IntegriFuse
OD Controlled

Threaded
Grooved

Standard NPT

Male Pipe Threads

Female Pipe Threads
Grooved

www.IntegrityFusion.com 59
 Integri Fuse
™

Supertech ID Controlled Transition Fitting

Threaded - Internally and Externally Coated

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nom. Size Steel X Y D d S1 S2 Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches
1” x 1” 11.90 5.52 1.67 1.04 0.12 0.13 TR-TH0100-11
1 ¼” x 1 ¼” 11.94 5.88 1.90 1.32 .015 0.14 TR-TH0125-11
1 ½” x 1 ½” 12.03 6.19 2.37 1.52 0.17 0.15 TR-TH0150-11
2” x 2” 12.16 6.22 2.87 1.90 0.22 0.15 TR-TH0200-11
3” x 3” 11.97 7.03 4.00 2.82 0.32 0.22 TR-TH0300-11
4” x 4” 12.06 7.06 5.50 3.64 0.41 0.24 TR-TH0400-11
6” x 6” 17.40 12.09 7.63 5.38 0.60 0.28 TR-TH0600-11
SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)
Nom. Size Steel X Y D d S1 S2 Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches
1” x 1” 11.90 5.52 1.67 0.99 0.14 0.13 TR-TH0100-9
1 ¼” x 1 ¼” 11.94 5.88 1.90 1.29 0.18 0.14 TR-TH0125-9
2” x 2” 12.16 6.22 2.87 1.82 0.26 0.15 TR-TH0200-9
3” x 3” 11.97 7.03 4.00 2.71 0.38 0.22 TR-TH0300-9
4” x 4” 12.06 7.06 5.50 3.49 0.48 0.24 TR-TH0400-9
6” x 6” 17.40 12.09 7.63 5.16 0.71 0.28 TR-TH0600-9
SDR 7 (Standard Dimension Ratio) based on 335 PSI (Working Pressure at 73.4˚ F)
Nom. Size Steel X Y D d S1 S2 Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches
1 ¼” x 1 ¼” 11.94 5.88 1.90 1.15 .028 0.14 TR-TH0125-7
2” x 2” 12.16 6.22 2.87 1.66 0.34 0.15 TR-TH0200-7
3” x 3” 11.97 7.03 4.00 2.46 0.50 0.22 TR-TH0300-7
4” x 4” 12.06 7.06 5.50 3.18 .64 0.24 TR-TH0400-7
6” x 6” 17.40 12.09 7.626 4.697 0.95 0.280 TR-TH0600-7

www.IntegrityFusion.com 61
 Integri Fuse
™

Supertech ID Controlled Transition Fitting

Weld End - Externally Coated

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nom. Size Steel X Y D d S1 S2 Z Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches Inches
1” x 1” 11.90 13.16 1.67 1.04 0.12 0.13 2 TR-WE0100-11
1 ¼” x 1 ¼” 11.94 13.44 1.90 1.32 .015 0.14 2 TR-WE0125-11
2” x 2” 12.16 13.78 2.87 1.90 0.22 0.15 2 TR-WE0200-11
3” x 3” 11.97 14.84 4.00 2.82 0.32 0.22 2 TR-WE0300-11
4” x 4” 12.06 14.88 5.50 3.64 0.41 0.24 2 TR-WE0400-11
6” x 6” 17.40 17.90 7.63 5.38 0.60 0.28 2 TR-WE0600-11
8” x 8” 24.44 22.88 9.63 7.02 .078 0.32 2 TR-WE0800-11

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nom. Size Steel X Y D d S1 S2 Z Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches Inches
2” x 2” 12.16 13.78 2.87 1.82 0.26 0.15 2 TR-WE0200-9
3” x 3” 11.97 14.84 4.00 2.71 0.38 0.22 2 TR-WE0300-9
4” x 4” 12.06 14.88 5.50 3.49 0.48 0.24 2 TR-WE0400-9
6” x 6” 17.40 17.90 7.63 5.16 0.71 0.28 2 TR-WE0600-9

SDR 7 (Standard Dimension Ratio) based on 335 PSI (Working Pressure at 73.4˚ F)
Nom. Size Steel X Y D d S1 S2 Z Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches Inches
1 ¼” x 1 ¼” 11.94 13.44 1.90 1.32 .015 0.14 2 TR-WE0125-7
2” x 2” 12.16 13.78 2.87 1.90 0.22 0.15 2 TR-WE0200-7
3” x 3” 11.97 14.84 4.00 2.82 0.32 0.22 2 TR-WE0300-7
4” x 4” 12.06 14.88 5.50 3.64 0.41 0.24 2 TR-WE0400-7
6” x 6” 17.40 17.90 7.63 5.38 0.60 0.28 2 TR-WE0600-7
8” x 8” 24.44 22.88 9.63 7.02 .078 0.32 2 TR-WE0800-7

62 www.IntegrityFusion.com
 Integri Fuse
™

Supertech ID Controlled Transition Fitting

Grooved End - Internally and Exterally Coated

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nom. Size Steel X Y D d S1 S2 Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches
2” x 2” 12.16 13.78 2.87 1.82 0.26 0.15 TR-GR0200-11
3” x 3” 11.97 14.84 4.00 2.71 0.38 0.22 TR-GR0300-11
4” x 4” 12.06 14.88 5.50 3.49 0.48 0.24 TR-GR0400-11

SDR 7 (Standard Dimension Ratio) based on 335 PSI (Working Pressure at 73.4˚ F)
Nom. Size Steel X Y D d S1 S2 Item Code
x HDPE (IPS) Inches Inches Inches Inches Inches Inches
2” x 2” 12.16 13.78 2.87 1.82 0.26 0.15 TR-GR0200-7
3” x 3” 11.97 14.84 4.00 2.71 0.38 0.22 TR-GR0300-7
4” x 4” 12.06 14.88 5.50 3.49 0.48 0.24 TR-GR0400-7

www.IntegrityFusion.com 63
 Integri Fuse
™

IntegriFuse OD Controlled Transition Fitting

Threaded - Internally and Externally Coated

SDR 11 (Standard Dimension Ratio) 200 PSI (Working Pressure at 73.4˚ F)

Nom. Size Steel x X Y D d Z Item Code
HDPE (IPS) Inches Inches Inches Inches Inches
2” x 2” 9.27 5.83 2.38 1.91 2.64 TI-TH0200-11
3” x 3” 12.05 6.81 3.50 2.82 3.76 TI-TH0300-11
4” x 4” 11.83 7.40 4.50 3.63 4.74 TI-TH0400-11

SDR 9 (Standard Dimension Ratio) 255 PSI (Working Pressure at 73.4˚ F)

Nom. Size Steel x X Y D d Z Item Code
HDPE (IPS) Inches Inches Inches Inches Inches
2” x 2” 9.27 5.83 2.38 1.81 2.64 TI-TH0200-9
3” x 3” 12.05 6.81 3.50 2.67 3.76 TI-TH0300-9
4” x 4” 11.83 7.40 4.50 3.44 4.74 TI-TH0400-9

SDR 7 (Standard Dimension Ratio) based on 335 PSI (Working Pressure at 73.4˚ F)
Nom. Size Steel x X Y D d Z Item Code
HDPE (IPS) Inches Inches Inches Inches Inches
2” x 2” 9.27 5.83 2.38 1.66 2.64 TI-TH0200-7
3” x 3” 12.05 6.81 3.50 2.44 3.76 TI-TH0300-7
4” x 4” 11.83 7.40 4.50 3.14 4.74 TI-TH0400-7

64 www.IntegrityFusion.com
 Integri Fuse
™

IntegriFuse Standard NPT Transition Fitting

SDR 7, 9 or 11 Pipe. Fittings availabe in Epoxy Coated Carbon Steel,

304 Stainless Steel and 316 Stainless Steel.

Male (MIPT) NPT Transitions

Nominal IPS A B C D E Item
Pipe Size inches inches inches inches inches Code
¾” 1.25 0.70 1.05 1.80 6.20 T-MPT-0075
1” 1.32 0.99 1.32 2.00 6.00 T-MPT-0100
1 ¼” 1.66 1.01 1.66 2.60 5.40 T-MPT-0125
1 ½” 1.90 1.03 1.90 2.60 5.40 T-MPT-0150
2” 2.39 1.06 2.39 3.00 5.00 T-MPT-0200
3” 3.50 1.26 3.50 4.00 4.00 T-MPT-0300
4” 4.50 1.48 4.50 4.00 8.00 T-MPT-0400

www.IntegrityFusion.com 65
 IntegriFuse
™

IntegriFuse Standard NPT Transition Fitting

SDR 7, 9 or 11 Pipe. Fittings availabe in Epoxy Coated Carbon Steel,

304 Stainless Steel and 316 Stainless Steel.

Female (FIPT) NPT Transitions

Nominal IPS A B C D E Item
Pipe Size inches inches inches inches inches Code
¾” 1.24 0.70 1.05 1.80 6.90 T-FPT-0075
1” 1.49 0.91 1.32 2.00 6.91 T-FPT-0100
1 ¼” 1.90 0.89 1.66 2.60 6.29 T-FPT-0125
1 ½” 2.25 0.85 1.9 3.00 5.85 T-FPT-0150
2” 2.75 1.00 2.38 4.00 5.00 T-FPT-0200
3” 4.14 1.62 3.5 4.38 5.62 T-FPT-0300
4” 5.16 1.88 4.5 4.62 5.88 T-FPT-0400

66 www.IntegrityFusion.com
 Integri Fuse
™

SDR 7, 9 11 or 17 Pipe. Fittings availabe in Epoxy Coated Carbon Steel

Grooved Transitions
Nominal IPS A B C D Item
Pipe Size inches inches inches inches Code
3” 3.50 3.50 2.83 4.00 T-GR-03
4” 4.50 4.50 3.63 4.00 T-GR-04
6” 6.63 6.63 5.35 8.00 T-GR-06
8” 8.63 8.63 6.96 8.00 T-GR-08
10” 10.75 10.75 8.68 8.00 T-GR-10
12” 12.75 12.75 10.29 9.00 T-GR-12

www.IntegrityFusion.com 67
IntegriFuse
™

Polyethylene Ball Valves

www.IntegrityFusion.com 69
 Integri Fuse
™

Small Valve Sizes and Dimensions with 2” Operating Nut

Black or Yellow Valves Available
Nominal Port PE Wall Normal Min Weight
L H C I E CV
Valve Size SDR OD “D” W/T lbs.
¾” IPS Full SDR 11 1.05 .095 11.50 5.12 3.70 1.06 3.62 32 1.06
1” IPS Full SDR 11 1.32 .119 11.50 5.12 3.70 1.06 3.62 50 1.06
1 ¼” IPS Reduced SDR 11 1.66 .151 11.50 5.12 3.70 1.06 3.62 79 1.08
1 ½” IPS Reduced SDR 11 1.90 .173 11.81 5.51 3.78 1.26 3.15 104 1.74
2” IPS Full SDR 11 2.38 .216 19.53 9.65 7.01 1.77 6.69 164 4.63
3” IPS Full SDR 11 3.50 .318 21.18 11.81 8.50 2.52 6.69 375 8.82
4” IPS Full SDR 11 4.50 .409 24.02 14.92 10.39 3.58 6.69 591 18.74
6” IPS Full SDR 11 6.63 .602 26.18 18.94 13.03 4.80 6.69 1280 39.90
8” IPS Full SDR 11 8.63 .784 30.12 24.80 16.57 6.69 6.69 2146 91.71

Valves meet ASTM D 2513 requirements, ISO 9001, and are manufactured with
materials that are approved for water contact as defined by NSF

70 www.IntegrityFusion.com
 Integri Fuse
™

STANDARD 10” IPS Full Port Through 16” IPS PE VALVES

Short Gear Actuator & Differential Bypass Assembly
Nominal PE Wall Normal Min Weight
Port L H C B I E CV
Valve Size SDR OD “D” W/T lbs.
10 IPS Full SDR 11 10.750 .977 30.12 31.89 23.66 N/A 7.95 7.09 3074 103.13

12 IPS Full SDR 11 12.750 1.159 38.50 38.58 26.16 17.36 11.38 5.71 4746 263.45

14 IPS Full SDR 11 14.000 1.273 35.83 38.58 26.16 17.56 11.38 5.71 5736 226.09

16 IPS Reduced SDR 11 16.000 1.455 35.83 38.58 26.16 18.23 11.38 5.71 6559 274.91

10” Valves do not include the Differential Bypass Assembly.

Valves meet ASTM D 2513 requirements, ISO 9001, and are manufactured with
materials that are approved for water contact as defined by NSF

www.IntegrityFusion.com 71
 Integri Fuse
™

Number Component Material Features

1 Body Polyethylene PE4710/PE100, PE 2406
2 End Polyethylene PE4710/PE100, or PE 2406
3 Ball Acetal / Polypropylene* Excellent Strength & Thermal Resistance
4 Retainer Polypropylene Positive seal under any condition. Retains seat
under high differential pressure
5 Ball Seat Nitrile (HNBR) Reliable sealing from –20˚ F to 140˚ F
6 Stem Acetal Excellent durability & strength
7 Stem Seal Nitrile (HNBR) Redundant sealing with dual O-rings
8 Weather Seal Nitrile (HNBR) Protects from ground water and dirt
9 Operating Nut Polypropylene 2 inch (50mm) square or hexagon
10 Purge Connector Polyethylene Integral easy purge connection

Note: The IntegriFuse valve utilizes a specially compounded Nitrile (HNBR) seal, unique in the industry.
HNBR = Hydrogenated Nitrile rubber, known for its excellent high temperature performance, tensile strength,
as well as high resistance to fuels, oils, solvents, and ozone.
2” IPS Reduced Port valves and smaller—Acetal 2” IPS Full Port valves and larger—Polypropylene

Item Operating Feature

Designed/Tested Valves meet ASTM D 2513 requirements, ISO 9001, and are manufactured with
materials that are approved for water contact as defined by NSF
Materials PE4710/PE100 Black SDR 11 rated @ 100 PSI for gas & 200 PSI for water
PE2406 Yellow SDR 11 rated @ 80 PSI for gas
Temperature From –20˚ F to 140˚ F (-20° C to 60° C)
Bore Reduced and Full Port
Pipe Connection Butt Fusion
Valve Boxes IntegriFuse valves are supported by all the leading valve box manufacturers

Hydrostatic Strength Test TEMP: 74° F TEMP 100° F TEMP: 176° F

1000 Hours 1000 Hours 170 Hours
265 PSI 214 PSI 136 PSI

72 www.IntegrityFusion.com
Integri Fuse
™

Equipment & Tools

Electrofusion Processor

Socket Fusion Kit

Scraper Tools

Re-Rounding Tools

Alignment Clamps

Rechargable Pipe Cutters

www.IntegrityFusion.com 73
 Integri Fuse
™

Electrofusion Processor

Fusion Capacity Scanner Supply Output Voltage Item Code

Voltage
½” - 63” Electrofusion Fittings SmartScan 120 V 8 VAC to 48 VAC INT-EFP-SS
½” - 63” Electrofusion Fittings SmartScan with GPS 120 V 8 VAC to 48 VAC INT-EFP-GPS

Fuses All Brands and Sizes of Universally Barcoded Electrofusion Fittings

Integri Fuse
™

Socket Fusion Kit

Size Supply Voltage Temp Control Screen Type Item Code

½” - 2” IPS 110 V / 60 Hz Adjustable Digital SCKTKT-INT052

74 www.IntegrityFusion.com
 Integri Fuse
™

Scraper Tools

Model Size Item Code

INT-052 ½” IPS - 2” IPS SCR-INT-052
INT-36 3” IPS - 6” DIPS SCR-INT-36
INT-816 8” IPS - 16” DIPS SCR-INT-816
INT-1832 18” IPS - 32” IPS SCR-INT-1832

IntegriFuse
™

Re-Rounding Tools

Size Inserts Type Item Code

63” IPS Master Hydraulic RRC-INT-63
54” IPS Master Hydraulic RRC-INT-54
48” IPS Master Hydraulic RRC-INT-48
36” DIPS 36” IPS, 34” IPS Hydraulic RRC-INT-36
32” IPS/30” DIPS 30” IPS, 28” IPS Hydraulic RRC-INT-32
24” DIPS 24” IPS, 22” DIPS, 20” DIPS, 20” IPS Hydraulic RRC-INT-24
18” DIPS 18” IPS, 16” DIPS, 16” IPS, 14” DIPS, 14” IPS Hydraulic RRC-INT-18
12” DIPS 12” IPS, 10” DIPS, 10” IPS, 8” DIPS, 8” IPS Manual RRC-INT-12
Most Sizes Also
Available for Rental

www.IntegrityFusion.com 75
 Integri Fuse
™

Alignment Clamps

Size Inserts Type Item Code

6” IPS 6” x 5”, 6” x 4” Manual ALC-INT-6
4” IPS 4” x 3” Master, 4” x 2” Master (1 ½”, 1 ¼”, 1”, ¾”, ½”) Manual ALC-INT-4
3” IPS 3” x 2” Master (1.5”, 1.25”, 1”, .75”, .5”) Manual ALC-INT-3
2” IPS 1 ½”, 1 ¼”, 1”, ¾”, ½” Manual ALC-INT-2

Integri Fuse
™

Rechargable Pipe Cutter

Cutting Range Supply Voltage Speed Battery Type Item Code

½” - 1 ¼” 9.6 V 4-5 Seconds per Cut Rechargable RPC-INT-1

76 www.IntegrityFusion.com
 Service
Customer service is a priority for Integrity Fusion Products. We are here to serve you. Your phone
call and email inquires are answered directly and promptly by one of our sales team members.

Integrity Fusion Products offers the largest range of HDPE fittings inventory in the country.
Unmatched products and quantities are in stock and ready to ship. Our warehouse houses a full
line and deep quantities of HDPE butt fusion, socket fusion, transitions, poly ball valves, electrofu-
sion fittings and equipment.

Integrity Fusion Products provides top quality products to you and your customer in a timely
manner. Most orders ship within 24 hours. With a wide range of shipping options at our service,
your products can be delivered how, when, and where you need them.

Innovation
New product development has always been part of our company culture. We listen to our
customers and we strive to exceed their expectations by developing new and innovative products
that offer solutions to these industry challenges. A few examples of this is our industry exclusive
Molded Butt Reducing Tees, unique one step reducer sizes, size on size electrofusion branch
saddles, electrofusion fittings up to 63” and high pressure electrofusion fittings up to 480 PSI.
Additional new products are currently in development as we work hard to help the HDPE market
segment grow.

Integrity
In 2006, when Doug Yelken started Integrity Fusion Products, Inc. the company name was very
intentional in both name and a philosophy for doing business. Our goal is that each of our em-
ployees acts with integrity in both their work and personal lives. In addition, the products we
manufacture are produced with integrity and are among the best in the industry. By selecting the
highest quality resin available in the market, and utilizing the most modern and innovative pro-
duction and quality control practices, we can proudly say that we are “INTEGRITY”.

www.IntegrityFusion.com 77
 Integri Fuse
™

Integrity Fusion Products, Inc.

P.O. Box 142607
215 Robinson Drive
Fayetteville, GA 30214
(P) 770-632-7530 (F) 770-632-7540
[email protected]

www.IntegrityFusion.com
Integrity Catalog v2.0 - IntegriFuse

Water | Gas Utility | Oil & Gas | Mining | Landfill | Geothermal | Industrial