Scribd
Upload
176 views1 page

ANT150F2: Fiberglass Collinear Antenna 2.5 DBD

The document summarizes an ANT150F2 fiberglass collinear antenna that operates in the 148-174 MHz frequency range. It produces a gain of 2.5 dBd and has a wide vertical beamwidth and omnidirectional pattern. The antenna is constructed of brass and copper elements and includes a protective radome to ensure durability in various environments. It includes mounting clamps and a removable coaxial jumper cable.

Uploaded by

Thuy VI Mai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
176 views1 page

ANT150F2: Fiberglass Collinear Antenna 2.5 DBD

The document summarizes an ANT150F2 fiberglass collinear antenna that operates in the 148-174 MHz frequency range. It produces a gain of 2.5 dBd and has a wide vertical beamwidth and omnidirectional pattern. The antenna is constructed of brass and copper elements and includes a protective radome to ensure durability in various environments. It includes mounting clamps and a removable coaxial jumper cable.

Uploaded by

Thuy VI Mai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

148 - 174 MHz

ANT150F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd

The Telewave ANT150F2 is an 90


60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20


and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
to DC ground for lightning impulse -30 -30

protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT150F2 156 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.55 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT150 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 148-174 MHz Dimensions (L x base diam.) in. 60 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 12 lb.
Power rating (typ.) 500 watts Shipping weight 16 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.3 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 50 lb.
Vertical beamwidth 38° Bending moment at top clamp 67 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject


Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7017 Rev. 1/11

You might also like