Scribd
Upload
1K views3 pages

Diagram of Lubricating Points

This document provides a lubrication list for a machine with 8 lubrication points. It specifies: 1. The component/part being lubricated for each point number 2. How often each point should be re-greased or had its oil changed, in hours 3. The recommended type and amount of lubricant to use 4. Any additional notes about maximum pressures or appropriateness for food applications

Uploaded by

Poposki Petre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views3 pages

Diagram of Lubricating Points

This document provides a lubrication list for a machine with 8 lubrication points. It specifies: 1. The component/part being lubricated for each point number 2. How often each point should be re-greased or had its oil changed, in hours 3. The recommended type and amount of lubricant to use 4. Any additional notes about maximum pressures or appropriateness for food applications

Uploaded by

Poposki Petre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

KQ-M

Diagram of lubricating points

Version 0308 page 1


KQ-M

Lubrication list for all points lubricated with grease

Pos. no. Description Regreasing Recommended Note


of of lubricant
lubrication component/lubricating point when how much how
diagram (h) (filling
quantity)
4 chain 50 spray apply by means GRAFLOSCON
drive infeed stroke of sprayer CA-PLUS Spray
Messrs. Klüber
5 bearing bush 200 15 g by means of ALTEMP QNB 50 - obligatory stipulated!
knife bar (17 cm 3) grease gun Messrs. Klüber - do not exceed a
lubricating pressure of
15 bar (220 psi)
6 bearing 500 15 g by means of MOBILGREASE XHP 222 - do not exceed a
infeed roll or (17 cm 3) grease gun Messrs. Mobil lubricating pressure of
(option) monthly RETINAX LX 15 bar (220 psi)
Messrs. Shell
7 bearing 500 15 g by means of MOBILGREASE XHP 222 - do not exceed a
evacuation roll above or (17 cm 3) grease gun Messrs. Mobil lubricating pressure of
(option) monthly RETINAX LX 15 bar (220 psi)
Messrs. Shell
8 bearing 500 15 g by means of MOBILGREASE XHP 222 - do not exceed a
chain drive or (17 cm 3) grease gun Messrs. Mobil lubricating pressure of
(option) monthly RETINAX LX 15 bar (220 psi)
Messrs. Shell

Version 0308 page 2


KQ-M

Lubrication list for all points lubricated with oil

Pos. no. Description Exchange resp. evacuation Recommended Note


of of lubricant
lubrication component/lubricating point when how much how
diagram (h) (filling
quantity)
2 cutting edges of knives 50 5l fill in KLÜBEROIL − (l) = appropriate for
or 4UH1-150 (l) food packing
if necessary Messrs. Klüber
− (nl) = not appropriate
VISCOLEB 150 (l)
Messrs. Optimol for food packing
MOBILGEAR 629 (nl)
Messrs. Mobil
3 circulating lubrication First time: 65 l fill in MOBILGEAR 629
knife bars 200 Messrs. Mobil
Any other OMALA Öl 150
Messrs. Shell
time:
1000

Version 0308 page 3

You might also like