Cat.No.

A01-12-B

Ordinary Pressure Gauges

(Silver M)
OUTLINE
This is a reasonable-priced, general-purpose
pressure gauge, manufactured in accordance with
JIS B 7505 Bourdon tube Pressure Gauge Stan-
dard, and is applicable to air pressure, hydrauslic
pressure and
other general pressure measuring.
FEATURES
• This is a pressure gauge in accordance with the
JIS Standard, demonstrating the stability of
quality and performance.
• A galvanized iron steel with self-corrosion resis
tance is used to the case, demonstrating excellent
corrosion resistance.
• The exterior frame is fixed with screws. Easy
maintenance work and marking by detaching it
are assured.
* In case of selecting pressure gauge, choose the pressure range which can
be used in between 30 ~ 65% of full scale, so that the gauge can give its
full capacity.
* Also should be confirmed whether the wetted parts material is suit
able for the fluid or not.

SPECIFICATION 1

Fluid: Window:
Gas or liquid 10MPa Range less than: Inorganic glass
10MPa Range over: Acrylic glass
Size:
60 DIA., 75 DIA., 100 DIA. Blowout disk:
When an emergency, Bourdon tube exploded, it open up
Mounting:
internal pressure from blowout disk, and blowout disk
Stem · · · · Type A
prevents puncture of Window.
Note To keep normal function, please take a space behind of
gauge at least 10mm when installing. Don't process or
Type B
stop up the blowout disk.
Range less than 10MPa: Without blowout disk
Range 10MPa or over: With blowout disk
Panel · · · · Type D
(mounting hole, the outside flange center Function:
socket, outside flange eccentricity socket) Standard, vibration-proof type (V)
Connection: * Division of application is based on with JISB7505 Bourdon gauge.
G1/4B (PF), G3/8B (PF), R1/4 (PT), Case material · Efinishing:
R3/8 (PT), R1/2 (PT), 1/2NPT Case Electricity galvanizing sheet-steel (SECC) · Black
(GS58, 59 is colored clo-mates)
Wetted parts material:
Cover 430st.st. (SPCC abd chrome plating for GS55 ~ GS59)
Bourdon tube Copper alloy (C6872T) (5MPa range over is 316st.st.)
Socket Copper alloy (C3604BD) (Type D of 75 DIA., 100 DIA. is CAC203) Treatment: (Option)
Use no oil & water
Pressure range:
(Manufactured and treated in a way that there shall be
0 ~ 0.1 h 0 ~ 50MPa
no oil or water residue at the wetting parts.)
-0.1 ~ 0 h -0.1 ~ 2MPa
Throttle: (Option)
Operating temperature:
For reducing pulsating pressure, throttle is put on the inlet port.
-5 ~ 40g
Type No. : FS10-011
Accuracy:
Dial scale specified: (Option)
±1.6%F.S. (JIS Standard)
Red line, Colored circle, Customer's logo
±1.5%F.S. (With no JIS mark)
 SPECIFICATION 2

Stem Type A (35)

(35)

105.5 DIA.
D DIA.
(12.5)
k
(h)

(h)
3 17
3j
f

f
d
G3
3

5 DIA.

3
5 DIA.
Size d D f h Type No. Size d f h j k Type No.
G1/4B 65 16 58 GS50-121 G3/8B 18 82 17 12.5 GS52-131
60

f
R1/4 65 16 58 GS50-171 d
f

d G1/2B 20 88 22 15 GS52-141
R3 R3
G1/4B 80.5 16 68 GS51-121 100 R3/8 18 82 17 12.5 GS52-181
75 G3/8B 80.5 18 70 GS51-131 R1/2 20 88 22 12.5 GS52-191
R3/8 80.5 18 70 GS51-181 1/2NPT 20 88 22 15 GS52-1M1

GS50-1 3 1 GS52-1 3 1
GS51-1 3 1

Stem Type B

3-4.5 DIA. (36) 3-4.5 DIA. (36)

Mounting hole 0.8 Mounting hole 0.8
P.C.D.D2 P.C.D.D2

D1 DIA.
D DIA.
D1 DIA.
D DIA.

k
k

h
3j 3j
h

Size d D1 D f h j k D2 Type No.

G1/4B 80 65 16 58 17 13.5 72 GS50-221
d f
f

d
60 G 3 5 DIA.
3
G3 R1/4 80 65 16 58 17 13.5 72 GS50-271
5 DIA.
3

G1/4B 98 80.5 16 68 17 13.5 88 GS51-221

75
f

G3/8B 98 80.5 18 70 17 13.5 88 GS51-231 d

R3
R3/8 98 80.5 18 70 17 13.5 88 GS51-281
f

d
R3 G3/8B 128 105.5 18 82 17 13.5 115 GS52-231
G1/2B 128 105.5 20 88 22 16 115 GS52-241
GS51-2 3 1
GS50-2 3 1 100 R3/8 128 105.5 18 82 17 13.5 115 GS52-281 GS52-2 3 1
R1/2 128 105.5 20 88 22 13.5 115 GS52-291
1/2NPT 128 105.5 20 88 22 16 115 GS52-2M1

Panel Type D
75 DIA., 100 DIA.
3-4.5 DIA.
3-4.5 DIA. Mounting hole
Mounting hole P.C.D.115
P.C.D.88 j j
j j
128 DIA.
103 DIA.
98 DIA.
78 DIA.

78 DIA.

103 DIA.

d
R3 d
25

R3
35
5 DIA.

5 DIA.

2 12 f
d
5 f1 f2 3 12 f
2 d
(h) 5 12 f 3
(h)

GS56- 2 3 1 GS57-2 3 1

Size d f1 f2 h j Type No. Size d f h j Type No.

G1/4B 10 16 63.5 12 GS56-221 G3/8B 18 66.5 14 GS57-231
75 G3/8B 12 18 65.5 14 GS56-231 G1/2B 20 68.5 17 GS57-241
R3/8 12 18 65.5 14 GS56-281 100 R3/8 18 66.5 14 GS57-281
R1/2 20 68.5 17 GS57-291
1/2NPT 20 68.5 17 GS57-2M1
 Panel Type D
60 DIA.
3-4.5 DIA.
Mounting hole 3-4.5 DIA.
P.C.D.72 Mounting hole

3 17
P.C.D.72

3 17
G1/4B G1/4B 16
16

80 DIA.
65 DIA.
62 DIA.
GS55-211 GS58-221

5 DIA.
5 DIA.

80 DIA.

63.3 DIA.
18.5
R1/4 R1/4
1.2 GS55-271 GS58-271

20 16 3 3 1.2 16 3

(39) 28 (32) 26

GS55-221 GS58-221
GS55-271 GS58-271

3-4.5 DIA.
Mounting hole
P.C.D.72
3 17

Throttle
G1/4B 16
63 DIA.
80 DIA.

GS59-221
M4
5 DIA.

0.5 DIA.
18.5

FS10-011

60°
R1/4 Material: Copper alloy
3 1.2 12 16 3 GS59-271 1.5
7 (C3604BD)
37 28
GS59-221
GS59-271

SPECIFICATION 3
Minimum graduation

Size
Pressure Range 60 DIA. 75 DIA. 100 DIA.
JIS JIS JIS
(MPa)
1.6% 1.6% 1.6%
~ 0.1 0.002 0.002 0.002
~ 0.16 0.005 0.005 0.005
~ 0.2
~ 0.25 0.005 0.005 0.005
~ 0.3
~ 0.4 0.01 0.01 0.01
~ 0.6 0.01 0.01 0.01
~1 0.02 0.02 0.02
~ 1.5
~ 1.6 0.05 0.05 0.05
~2
~ 2.5 0.05 0.05 0.05
~ 3.5
~4 0.1 0.1 0.1
~5
~6 0.1 0.1 0.1
~7
~ 10 0.2 0.2 0.2
~ 15
~ 16 0.5 0.5 0.5
~ 25 0.5 0.5 0.5
~ 35
~ 40 1 1
~ 50
-0.1 ~ 0 0.002 0.002 0.002
~ 0.1 0.005 0.005 0.005
~ 0.16 0.005 0.005 0.005
~ 0.2
~ 0.25 0.01 0.01 0.1
~ 0.3
~ 0.4 0.01 0.01 0.01
~ 0.6 0.02 0.02 0.02
~1 0.02 0.02 0.02
~ 1.5
~ 1.6 0.05 0.05 0.05
~2
~ 2.5 0.05 0.05 0.05
 Type No. constitution Please specify Type No., each spcification and range when ordering.

Note: For this Model, there is no applicable item for the figures X, but please specify X when ordering.
Size

1 Stem Type A
G S 5 0
2 Stem Type B

60 DIA. G S 5 5 2 Panel Type D (Mounting hole)

G S 5 8 2 Panel Type D (Outsidecenter
flange
socket)
G S 5 9 2 Panel Type D (Outside flange
eccentricity socket)

1 Stem Type A
G S 5 1
75 DIA. 2 Stem Type B
G S 5 6 2 Panel Type D (Outside flange
eccentricity socket)

1 Stem Type A
G S 5 2
2 Stem Type B
100 DIA.
G S 5 7 2 Panel Type D (Outside flange
eccentricity socket)

1 Mounting (type)
Model

Ordinary pressure gauges

Selection spec. Additional spec. (Option)
(Silver M) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

GS 5 1 0 0 X X X X

Type No.

9 Other additional spec.

0 Nil
2 Connection 1 Please specify your requirement
GS50 · 55 Dial scale specified, throttle option
Possible or not GS58 · 59 GS51 · 56 GS52 · 57
2 G1/4B o o —
3 G3/8B — o o
4 G1/2B — — o 8 Treatment
7 R1/4 o — —
0 Nil
8 R3/8 — o o
1 Use no oil
9 R1/2 — — o
2 Use no water
M 1/2NPT — — o
3 Use no oil & water

7 Window
3 Wetted parts material 0 Inorganic glass (10MPa range or less)
1 Bourdon tube: C6872T Acrylic glass (10MPa range over)
(5MPa range over is 316st.st.)
Socket: C3604BD
6 Pointer
(75 DIA., type D of 100 DIA. is CAC203)
0 Standard type
14 Standard
5 Function J JIS Accuracy
±1.6% F.S.
0 Standard X Not JIS standard
C V: Vibration-proof type
4 Pressure range (MPa)
(When ordering, please specify pressure range & unit.)
15 Document
Possible or not 60 DIA. 75 DIA. 100 DIA.
0 Nil
1 -0.1 ~ 0, 0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5 o o o
1 Please specify your requirement
2 0 ~0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5, 3.5, 4, -0.1~1 o o o
3 0 ~ 5, 6, 7 o o o Drawing one sheet, Instruction manual,
4 0 ~ 10, 15, 16 o o o Inspection procedure, Mill sheet,
5 0 ~ 25 o o o Test report
0 ~ 35, 40 — o o
6 0 ~ 50 — — o

The contents in the catalogue are subject to change without notice.

UEDA FACTORY (JQA–0794) UEDA FACTRY

(JE064A)
MARUKO FACTORY (JQA–0789) MARUKO FACTRY

HEAD OFFICE & : 1-30-4, HIGASHIMAGOME OHTA-KU, TOKYO, JAPAN.

OVERSEAS PHONE : +81–3–3776–5328
SALES DEPT FAX : +81–3–3776–5447
E-mail : overseas_sales_dept @ naganokeiki.co.jp
URL http : //www.naganokeiki.co.jp/
OVERSEAS PLANTS
OR AFFILIATES: U.S.A., KOREA, GERMANY
OVERSEAS SALES NETWORK: AUSTRALIA, HONG KONG, INDONESIA,
KOREA, MALAYSIA, PHILIPPINES,
SINGAPORE, TAIWAN, THAILAND, U.S.A.
,
100% Recycled Paper. PRINTED IN JAPAN 03.3.1000B(N)