0% found this document useful (0 votes)
101 views4 pages

Euro 5 Euro 5: Chassis 6x4

This document provides specifications for the EURO 5 compliant IVECO Cursor 13 turbo intercooler diesel engine models and their corresponding gearbox options. Engine power ratings range from 302 kW for the 64.41 model to 412 kW for the 64.56. Torque ratings range from 1,900 to 2,500 Nm. Transmission options include a manual ZF 16 speed gearbox or an automatic ZF 12 speed ASTRONIC gearbox. Maximum vehicle speeds in each gear range from 5.7 to 110 kph depending on the model and rear axle ratio.

Uploaded by

jacques Perron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
101 views4 pages

Euro 5 Euro 5: Chassis 6x4

This document provides specifications for the EURO 5 compliant IVECO Cursor 13 turbo intercooler diesel engine models and their corresponding gearbox options. Engine power ratings range from 302 kW for the 64.41 model to 412 kW for the 64.56. Torque ratings range from 1,900 to 2,500 Nm. Transmission options include a manual ZF 16 speed gearbox or an automatic ZF 12 speed ASTRONIC gearbox. Maximum vehicle speeds in each gear range from 5.7 to 110 kph depending on the model and rear axle ratio.

Uploaded by

jacques Perron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

EURO 5

Step 2

Chassis 6x4
chassis 6x4
64.41 / 64.44 / 64.48 / 64.52 / 64.56
800 M

208
3317(*)
3137(*)
25,4° H
18,1°
314 404
145 1827
1515 X 1450 S 300 2032

K1 2500

K2
(*) Unloaded

DIMENSIONS (mm) (Tyres 13R22,5 156/150G)


wheelbases

H TURNING
X K1 K2 M S S DIAMETER
ON REQUEST
LOADED

A 3200 7365 7665 5050 1200 16700


B 3500 7665 7965 5350 1200 17300
C 3800 7965 8265 5650 1200 18000
1194 1137
D 4100 8265 8565 5950 1200 1500/1900 18700
E 4500 8665 8965 6350 1200 1900 20000
F 4750 9615 9915 7300 1900 20700

WEIGHT (kg)
EURO 5
wheelbases

Distribution net weight (*) Max. technical weight

2nd+3rd net Gross Combination


1st axle axle weight 1st axle 2nd+3rd axle Gross Vehicle weight
weight
A 5235 4745 9980
B 5170 4730 10000
8000
C 5330 4700 10030 8500 9000 32000 41000 104000
D 5360 4710 10070 (1) (1) (2)
E 5415 4705 10120
F 5545 4850 10395
(*) Weight including oil, fuel, spare wheel, driver Kg. 75
(1) With tyres 1st axle 385/65R22,5 160 J, reinforced springs (OPT). Other tyres available, subject to the Astra technical office approval.
(2) Only for HD8 64.48, HD8 64.52 and HD8 64.56 at max speed 50 Kph. Michelin/Pirelli tyres. Higher speed are allowed with load reductions
subject to the Astra Technical office approval.

05-2007
ENGLISH
Technical data and general specifications - validity to be checked according to each individual country.
ENGINES
CURSOR 13 turbo intercooler diesel injection/cycle with electronic unit injection pumps. 6 in-line cylinders. Single block head, four
valves per cylinder, light alloy pistons. Total displacement: 12.882 cm3. Bore for stroke: 135 x 150 mm.Water cooling. Viscostatic
cooling fan. Dry air filter with safety cartridge. Vertical muffler. Emissions according to 5 regulation norms SCR (Selective
Catalytic Reduction) system composed of catalytic muffler, AdBlue-tank, injection and control system.

64.41 64.44 64.48 64.52 64.56


Model IVECO F3B E3681D IVECO F3B E3681G IVECO F3B E3681F IVECO F3B E3681E IVECO F3B E3681A

Max. power (EEC) 302 kW ( 410 HP) 324 kW (440 HP) 353 kW (480 HP) 382 kW (520 HP) 412 kW (560 HP)
Corresponding rpm 1.900 rpm 1.900 rpm 1.900 rpm 1.900 rpm 1.900 rpm
Max. torque (EEC) 1.900 Nm (194 kgm) 2.200 Nm (224 kgm) 2.300 Nm (234 kgm) 2.400 Nm (245 kgm) 2.500 Nm (255 kgm)
Corresponding rpm 1.000-1.440 rpm 1.000-1.440 rpm 1.000-1.440 rpm 1.000-1.440 rpm 1.000-1.690 rpm

Turbine WG Waste Gate VGT variable geometry

GEARBOX
Manual gear ZF 16 S 2220 TO for HD8 64.41 / HD8 64.44 and ZF 16 S 2520 TO for HD8 64.48 / HD8 64.52 / HD8 64.56
with servoshift, 16 synchronised forward speeds + 2 reverse
On request: ASTRONIC automatic gearbox ZF 12AS2330 OD only for HD8 64.44 - 64.48.

Speed [kph] calculated at maximum power rpm


Gears
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 RM RM
Gear ratios 13,80 11,54 9,49 7,93 6,53 5,46 4,57 3,82 3,02 2,53 2,08 1,74 1,43 1,20 1,00 0,84 12,92 10,80

1:4,229 6,7 8,0 9,7 11,7 14,2 16,9 20,2 24,2 30,6 36,5 44,4 53,1 64,6 77,0 92,4 110,0 7,2 8,6
Rear axle ratio
ZF 16 S 2520TO
ZF 16 S2220TO

1:5,009 5,7 6,8 8,2 9,8 11,9 14,3 17,1 20,4 25,8 30,8 37,5 44,8 54,6 65,0 78,0 92,9 6,0 7,2

1:5,558 5,1 6,1 7,4 8,9 10,8 12,9 15,4 18,4 23,3 27,8 33,8 40,4 49,2 58,6 70,3 83,7 5,4 6,5

1:6,095 4,6 5,6 6,8 8,1 9,8 11,7 14,0 16,8 21,2 25,3 30,8 36,8 44,8 53,4 64,1 76,3 5,0 5,9

1:6,588 4,3 5,1 6,3 7,5 9,1 10,9 13,0 15,5 19,6 23,4 28,5 34,1 41,5 49,4 59,3 70,6 4,6 5,5

Gear ratios 12,33 9,59 7,43 5,78 4,56 3,55 2,70 2,10 1,63 1,26 1,00 0,78 - - - - 11,41 8,88
ZF 12AS2330OD

1:4,229 7,5 9,6 12,4 16,0 20,3 26,0 34,2 44,0 56,7 73,3 92,4 118,4 - - - - 8,1 10,4
Rear axle ratio

1:5,009 6,3 8,1 10,5 13,5 17,1 22,0 28,9 37,2 47,9 61,9 78,0 100,0 - - - - 6,8 8,8

1:5,558 5,7 7,3 9,5 12,2 15,4 19,8 26,0 33,5 43,1 55,8 70,3 90,1 - - - - 6,2 7,9

1:6,095 5,2 6,7 8,6 11,1 14,1 18,1 23,7 30,5 39,3 50,9 64,1 82,2 - - - - 5,6 7,2

1:6,588 4,8 6,2 8,0 10,3 13,0 16,7 22,0 28,2 36,4 47,1 59,3 76,0 - - - - 5,2 6,7

P.T.O.
On request:

Gearbox ZF16S2220TO-ZF16S2520TO ZF 12AS2330OD Max. torque


Ratio
Application
P.T.O. Ratio Nm.
ZF NH/1b 0,91/1,09:1 1,35:1 1000 For tipping unit pumps, pumps for cranes, ecc..
ZF NH/1c 0,91/1,09:1 1,35:1 1000 For tipping unit pumps, unit pumps for concrete, pumps for cranes, ecc..
ZF NH/4c 1,17/1,40:1 1,21:1 430 For tipping unit pumps, ecc..
ZFN221/10bpl+N353/1c 1,75/2,09:1+0,91/1,09:1 2,15:1+1,48:1 560+600 double PTO for concrete pumps

ZF NMV1 221 Power take-off (ratio1,55:1) max available torque 1300 Nm for concrete pumps (only with gear ZF16S2520TO).
Power take off at flywheel (ratio 1,29:1) max available torque 900 Nm for concrete mixers.

Technical data and general specifications - validity to be checked according to each individual country.
CLUTCH TYRES
Single dry plate, diameter 17”. Pull type engagement with
FRONT: 13R22,5 156/150 G Single tubeless

Chassis 6x4
diaphragm spring. Hydro-pneumatic power steering engagement REAR: 13R22,5 156/150 G Twin tubeless
control, with driven disk wear recovery slave cylinder. Spare wheel on the chassis.
Other Possible combinations:

AXLES TYRES ASSEMBLY


FRONT FRONT REAR
Steering, hot moulding in high tensile steel. Wheel stud 12 00 R 20 156/150G
protection. S D
REAR 315/80 R 22,5 156/150K
Double drive axles. Double reduction: crown wheel and pinion 385/65 R 22,5 160J(*) S
centrally and epicyclical group in wheel hubs.
315/80 R 22,5 156/150K D
2nd axle with torque distributor to the two rear axles. Lockable
differentials by pneumatic control from driver's seat. Tandem S single
assembled to the chassis by reaction rods with silentblock. D double
On request: (*) Mandatory with 9 ton front axle load.
Rear-axle ratio 1:4,229
Rear-axle ratio 1:5,009
Rear-axle ratio 1:5,558 PNEUMATIC SYSTEM
Rear-axle ratio 1:6,095
Rear-axle ratio 1:6,588 Two-cylinder 630 cc compressor , APU (Air Processing Unit)
that includes: regulation valve set at 10.3 bar, drier, 4-way
safety valve, pressure reduction valve for parking circuit and
services. 3 air tanks, capacity 30 litres + 2 with 20 litres.
SUSPENSIONS ABS system and EBL (Electronic Brake Limiter).
FRONT
1st axle, parabolic springs, n° 4 leaves 24x90 mm, chord 1800
mm, with hydraulic shock absorbers. BRAKES
stabilizer bar standard.
On request: Front and rear "duo-duplex" self-adjusting wedge type brakes
Reinforced parabolic springs, n° 5 leaves 24x90 mm, chord with automatic play take-up.
1800 mm. Extra-reinforced conventional springs, n° 10 leaves Total net braking surface 9.276 cm2. ABS.
15x90 mm, chord 1800 mm. Mandatory with 9 t axle load. Service brake: Pedal controlled air brake, acting on all
REAR wheels.
Parabolic springs, swivelling on central pin: n° 4 leaves 40x100 Solo vehicles, two independent circuits, one for 1st axle,
mm, chord 1450 mm. one for 2nd and 3rd axle; 1st category wheels anti-lock system.
On request: Towing vehicles, three independent circuits, one for 1st axle,
stabilizer bar on 2nd axle. one for 2nd and 3rd axle and another for the trailer; 1st category
stabilizer bar on 3rd axle. wheels anti-lock system.
Extra-reinforced conventional springs, n° 10 leaves 25x100 Emergency brake: Incorporated in service brake.
mm, chord 1450 mm. Mandatory for heavy duty use. Parking brake: Manual spring-type mechanical with
pneumatic control acting on 2nd and 3rd axle wheels.
IVECO BRAKE TURBO engine brake:
HD8 410 braking power 200 kW (272 cv)
CHASSIS HD8 440/480/520/560 braking power 255 kW (347 cv)
Special steel with high elasticity limit, two flat and parallel On request:
Hydraulic intarder (64.44 / 64.48 / 64.52 / 64.56).
side members (width 820 mm.), C section (320x90x10mm), 1st axle immobiliser system.
cross members riveted to the frame. OFF/ROAD button for excluding ABS for speed < 15 kph.
R.B.M. (Rail Bending Moment): 202.020 Nm (20.593 Kgm.).
Steel front bumpers with headlamp protection grids, front
manoeuvring hook, rear underrun bar, steel fuel tank capacity
300 litres.
On request:
EURO 5
Rapid attachment for compressed air for tyres’inflation.
Rear underrun bar in set back position.
Extra long underrun bar for concrete mixer.
Rear manoeuvring hook.
Rear automatic towing hook.
Rubber mudguards on 2nd and 3rd axle.
Side windlass for spare wheel.
ENGLISH 6x4

Technical data and general specifications - validity to be checked according to each individual country .
STEERING CAB
White cab with hydraulic tipping. Built in moulding fiberglass
ZF 8098 quadrilateral power steering on front axle wheels with tubular steel armature. Tested on the most demanding off
with variable ratio 1:22.2/1:26.2 with auxiliary cylinder. road routes. Cab suspension with guiding arms, spiral springs,
Circuit with main hydraulic pump on engine and emergency double action shock absorbers, anti-roll bar and end-of-stroke
pump on gearbox. pads. Internal panels completely washable and fireproof. 4-speed
Steering rods with self-lubricating joints. ventilation and heating system with air recirculation system.
Height and inclination pneumatic adjustable steering column. Collapsible first step. Electric power windows on driver and
passenger doors. Beacon lights on cab roof. Driver seat with
pneumatic suspension and seat belt. Passenger seat with
SERVICE DATA(l) mechanical suspension with seat belts. Tinted athermic
windows. Steering wheel adjustable in hight and slope with
Engine oil sump and filters ........................................ 28 pneumatic control.
Gearbox oil: ZF 12AS2330OD........................................ 12 On request:
Gearbox oil: ZF 16S2220TO/ZF 16S2520TO ................ 11 Car radio RDS, CD;
Power steering oil ........................................................ 8,5 Car radio RDS, CD on the steering wheel controls;
Cab tipping oil ................................................................ 1 Car radio RDS, CD, MP3, Blue Tooth technology;
Clutch circuit oil ........................................................ 0,5 Compressed air quick coupling for cab cleaning;
Integral PTO oil ........................................................ 3 Roof hatch;
Intermediate axle with final red. oil ................................ 27 Air conditioning;
Rear axle with final red. oil ........................................ 16 Centralized closing of the doors with remote control;
Cooling system water ................................................ 33 Metallic colour cab;
Diesel ........................................................................ 300 Non-metallic colour cab;
AD Blue ........................................................................ 45 Heated and electric powered rear view mirrors;
Cab rear window;
External sun visor.
ELECTRICAL SYSTEM
Voltage: 24 V INSTRUMENTATION
Alternator generator 90 A - 28 V (2520 W).
Accumulators: 2 in series, 170 Ah. Trip Computer multifunction dislay. Multiplex electronic system
Starter motor 24 V 5,5 kW. for fundamental information for the driver: average speed,
consumption and general information about the main components
Mechanically controlled electrical circuit breaker.
for ideal use of the vehicle.
Anti-block system ABS with 4-conduits and 4-electric valves- It also allows to carry out the daily controls on the vehicle at any
electronic system. moment, thus optimizing the time and energies needed for
Phonic wheels and sensors on 1st and 3rd axle. production’s purposes. Dashboard and ergonomic instrument
1 electrical joint 7-pole(ISO 7638) for trailer ABS(if applicable). board contain the function buttons and the identification
1 electrical joints 15-pole(ISO 12089-4091) for trailer lighting commands.
(if applicable). Indicator lights: engine oil low pressure, alternator charging
Headlamp geometry corrector . low, main beam lights, side lights, engine warm-up, rear fog
Electrical provision for outfitters. light, hazard lights, tractor turn indicators, trailer turn indicators
Provision for diagnostics. (if applicable), rotating lights,cab lifted,axles differential locked,
Provision for radio/cb (without speakers) differential lock, front brakes air pressure low, rear brakes air
Glow plug for cold start. pressure low, trailer brakes air pressure low (if applicable),
On request: parking brake engaged, splitter (reduction on), slow speeds
170 Ah tropicalised accumulators; (1-4/9-12),power take-off on (if applicable) air filters clogged,
Reverse alarm; power steering oil level low, rear view mirrors heated (if applicable),
Electrically controlled main current circuit breaker. tractor ABS, trailer ABS (if applicable), main steering circuit failure,
steering auxiliary circuit failure, low ureas’ level.

ASTRA Veicoli Industriali DEALER


Via Caorsana, 79
05 - 2007 A3501170

29100 Piacenza (Italy)


Tel. ++39-523/5431
Fax ++39-523/59.17.73
www.astraspa.com

Characteristics and equipment are subject to changes without prior notice.

Technical data and general specifications - validity to be checked according to each individual country.

You might also like