PEG 8 PEG 10 VACUCHECK 90 VACUTEST 116 ENG

VALVE SEAT GRINDER VALVE SEAT GRINDER AIR VACUUM CHECKER ELECTRIC VACUUM TESTER

Ø 16÷48 mm Working range Ø 20÷65 mm Max. vacuum value -850 mbar Suction volume
13.000 RPM Grinding wheel speed rotation 11.000 RPM Case weight 4,6 Kg Max. vacuum value
30 RPM Relative motion 27 RPM Electric power
1,5 mm Fixed eccentricity 2,5 mm Dimensions
250 W Motor power 350 W Weight by
PEG 90 PEG 125 RB 110 PEG 25-50
VALVE SEAT GRINDER VALVE SEAT GRINDER CONROD BALANCER LINE BORING TOOL

Ø 40÷90 mm Working range Ø 50÷120 mm Connecting rod length 200 mm Number of tool seats 12
8.000 RPM Grinding wheel speed rotation 5.500 RPM Max. accuracy 1,0 gr Max. boring travel 90 mm
18 RPM Relative motion 12 RPM Boring diameter Ø 24÷40 mm
3 mm Fixed eccentricity 3 mm Feed per revolution 0,05 mm
600 W Motor power 600 W Rotation speed 400-600 RPM

PEG 175V PEG AVIO *

MACHINERY AND
ROSSI & KRAMER s.r.l.
Via Nazionale, 19 - 31010
Godega di Sant’Urbano - TV EQUIPMENT FOR
ITALY
Tel. +39 0438 430 450
[email protected]
ENGINE REBUILDING
Ø 70÷180 mm Working range *Variant for PEG 8 www.pegrk.com
2.800-5.600 RPM Grinding wheel speed rotation PEG 10
8÷16 RPM Relative motion PEG 90
3 mm Fixed eccentricity Refer to related
M A D E I N I TA LY
1.300 W Motor power technical data
 RS 993 FM1 RV 3000
VALVE SEAT MACHINE MANUAL VALVE SEAT MACHINE VALVE REFACER

Working range Min. valve seat diameter Ø 16 mm Valve stem diameter Ø 4÷16 mm
Sleeve inclination Max. valve seat diameter Ø 65 mm Grinding angle 20°÷60°
Sleeve travel Spindle stroke 15 mm Max. head diameter Ø 100 mm
Min. valve seat diameter Min. rotation speed with variable motorization 30 RPM Max. valve length 400÷450 mm
Max. valve seat diameter Max. rotation speed with variable motorization 100 RPM Min. valve length at 30° and 45° 75 mm
Spindle rotation speed Power supply 230V 1PH - 400V 3PH Min. valve head diameter 30° Ø 22 mm
Voltage Motor power 0,24kW 1PH – 0,37kW 3PH Max. valve head diameter 45° Ø 18 mm
Power Grinding wheel diameter Ø 175×30 mm
Air pressure Grinding wheel rotation speed 2800 RPM
Dimensions Valve dragging wheel rotation speed 14 RPM
Weight Dimensions 80×60×60 cm

RS 08L SP 16R RV 5500

Working range 800×100 mm Table surface 177×117 mm Max. valve stem diameter Ø 40 mm
Sleeve inclination ±7º Grinding wheel diameter Ø100 mm Min. valve head diameter at 45° with steady rest Ø 15 mm
Sleeve travel 200 mm Grinding wheel rotation speed 2800 RPM Max. valve head diameter at 30° and 45° Ø 200 mm
Min. valve seat diameter Ø 16 mm Max. working height 50 mm Min. valve length at 30° and 45° with steady rest 230/180 mm
Max. valve seat diameter Ø 65 mm Vernier scale 0,01 mm/notch – 0,1 mm/rev. Min. valve length at 30° and 45° without steady rest 95/180 mm
Spindle rotation speed 0÷1000 RPM Power supply 400V 50Hz 3Ph – 0,5kw Grinding wheel motor stroke 95 mm
Working pressure 8 bar Dimensions W×L×H 60×40×71 cm Graduated sector stroke 150 mm
Power 2 KW (10 A) Weight 66 Kg Grinding angle 20°÷60°
Dimensions 140×110×200 cm Grinding wheel diameter Ø 175×30 mm
Weight 700 Kg Grinding wheel rotation speed 2800 RPM
Spindle rotation speed 20÷50 RPM