globe valve

SPECIFICATION
GLOBE VALVE APPLICATION
Globe valves are primarily used as control valves where throttling or both throttling and shut-off are required.
Globe valves can also be used for on-off service; however, because of the design, pressure drop becomes in-
herent. This is generally confined to on-off applications where the valve is normally closed and pressure drop
is not important when the valve is open. Globe valves are uni-directional valves and normal applications will
find the globe valve with the flow and pressure under the disc.

MANUFACTURING STANDARDS
General Design BS 1873 / API 600 / API 603
Face To Face ASME/ANSI B16.10
Flange End ASME/ANSI B16.5 & B16.47
Butt Weld End ASME/ANSI B16.25
Fire Safe Design API 6FA
Pressure Rating ASME/ANSI B16.34
Inspection & Test API 598 / API 6D
Features Bolted Bonnet, Outside Screw & Yoke,
Rising Stem

DISC
The valve is normally supplied with the conical plug
type disc. The disc rotates freely on the stem and
incorporates a differential angle form that on the seat
ring. This design provides the maximum assurance of
shut off, is less likely to stick in the body seat, and is
considered the simplest design for field repair.
END CONNECTIONS
BACK SEATING DESIGN Our valves standard end connection are available in:
All our globe valves have back seating design. When - Flange end type with Raised Face (RF), Flat Face
the globe valve is at fully open position the back seat (FF) or Ring Type Joint (RTJ) that conform to
can seal against the stem. ANSI B16.5.
glt valves

- Butt-welding ends (BW) that conform to ANSI

STEM B16.25.
All stem are rotating, rising and designed with integral - All face-to-face / end-to-end dimensions that
backseat features which provide sealing when fully conform to ANSI B16.10.
open. Other special end connections can be supplied
according to customer’s requirements.
PACKING
The stem packing is designed and arranged to ensure OPERATOR
a maximum seal along the stem during operation or Standard valves come in manual operation. Gear
while at position thus allowing for a greater reduction operation can be installed in valves if required. Other
in fugitive emissions. Our standard packings are made accessories such as actuators, chainwheels, locking
of graphite. device and many others options are also available to
meet customer requirements.

14
globe valve
CAST STEEL GLOBE

STANDARD PARTS & MATERIAL

CARBON STEEL ALLOY STEEL STAINLESS STEEL
No. Parts
WCB LCB WC6 WC9 C5 C12 CF8(M) CF3(M)
1 Body A216 WCB A352 LCB A217 WC6 A217 WC9 A217 C5 A217 C12 A351 CF8(M) A351 CF3(M)
A350 LF2 + A182 F11 + A182 F22 + A182 F5 + A182 F9 +
2 Seat A105 + STL A351 CF8(M) A351 CF3(M)
STL STL STL STL STL
A216 WCB A352 LCB + A217 WC6 A217 WC9 + A217 C5 + A217 C12 +
3 Disc A351 CF8(M) A351 CF3(M)
+ 13CR 13CR +13CR 13CR 13CR 13CR
Disc Thrust A276 A276
4 A276 420 A276 304 A276 420
Plate 304/316 304L/316L
A182 F304/ A182 F304L/
5 Disc Nut A276 410 A276 F304 A276 410
F316 F316L
A182 F304/ A182 F304L/
6 Stem A182 F6 A182 F304 A182 F6
F316 F316L
7 Bonnet Nut A194 2H A194 7 A194 4 A194 8
8 Bonnet Bolt A193 B7 A320 L7 A193 B16 A193 B8
9 Gasket SS304 + Graphite PTFE / SS316 + Graphite
A182 F304/ A182 F304L/
10 Back Seat A276 410 A276 F304 A276 410
F316 F316L
11 Packing Flexible Graphite PTFE/Flexible Graphite
glt valves

12 Bonnet A216 WCB A352 LCB A217 WC6 A217 WC9 A217 C5 A217 C12 A351 CF8(M) A351 CF3(M)
13 Pin Steel SS304
A182 F304/ A182 F304L/
14 Gland A276 410 A276 F304 A276 410
F316 F316L
Gland
15 A216 WCB A352 LCB A217 WC6 A217 WC9 A217 C5 A217 C12 A351 CF8(M) A351 CF3(M)
Flange
Gland Eye-
16 A193 B7 A320 L7 A193 B16 A193 B8
bolt
17 Nut A194 2H A194 7 A194 4 A194 8
18 Yoke Brush A439 D-2
19 Screw Steel SS304
20 Handwheel Ductile Iron
Handwheel
21 Steel Bronze
Nut
22 Washer

Other valve material composition are available.

15
 globe valve
CAST STEEL GLOBE

Size L L1 L2 H Wt.
W
(In) (RF) (BW) (RTJ) (open) (Kg)
2 200 ( 8.00) 200 ( 8.00) 200 ( 8.00) 203 ( 8.00) 338 (13.30) 21
api 600 / asme b16.34

2.1/2 250 (10.00) 216 ( 8.50) 216 ( 8.50) 216 ( 8.50) 373 (14.70) 29
3 250 (10.00) 241 ( 9.50) 241 ( 9.50) 241 ( 9.50) 396 (15.60) 35
4 300 (12.00) 292 (11.50) 292 (11.50) 292 (11.50) 476 (18.70) 58
class 150

5 350 (14.00) 356 (14.00) 356 (14.00) 369 (14.53) 497 (19.60) 78
6 350 (14.00) 400 (15.75) 400 (15.75) 406 (16.00) 524 (20.60) 104
8 400 (16.00) 495 (19.50) 495 (19.50) 495 (19.50) 588 (23.10) 162
10 500 (20.00) 622 (24.50) 622 (24.50) 622 (24.50) 738 (29.10) 289
12 500 (20.00) 699 (27.50) 699 (27.50) 698 (27.50) 862 (33.90) 485
14 560 (22.00) 787 (31.00) 787 (31.00) 787 (31.00) 950 (37.40) 550
16 650 (26.00) 914 (36.00) 914 (36.00) 914 (36.00) 994 (39.20) 724
18 610 (24.00) 978 (38.50) 978 (38.50) 991 (39.00) 1140 (44.90) 1400
20 610 (24.00) 978 (38.50) 978 (38.50) 991 (39.00) 1262 (49.70) 2600
24 810 (31.90) 1295 (51.00) 1295 (51.00) 1308 (51.50) 1524 (60.00) 3700
Standard Fig. No. 2A1C1

Size L L1 L2 H Wt.
W
(In) (RF) (BW) (RTJ) (open) (Kg)
api 600 / asme b16.34

2 200 ( 8.00) 267 (10.50) 267 (10.50) 282 (11.12) 354 (13.90) 26
2.1/2 250 (10.00) 292 (11.50) 292 (11.50) 308 (12.12) 389 (15.30) 38
class 300

3 250 (10.00) 318 (12.50) 318 (12.50) 333 (13.12) 421 (16.60) 51
4 350 (14.00) 356 (14.00) 356 (14.00) 371 (14.62) 496 (19.50) 76
5 450 (18.00) 400 (15.75) 400 (15.75) 416 (16.38) 577 (22.70) 125
6 500 (20.00) 445 (17.50) 445 (17.50) 460 (18.12) 675 (26.60) 173
8 560 (22.00) 559 (22.00) 559 (22.00) 575 (22.62) 912 (35.90) 297
10 600 (23.60) 622 (24.50) 622 (24.50) 638 (25.12) 949 (37.40) 500
12 650 (26.00) 711 (28.00) 711 (28.00) 727 (28.62) 1032 (40.60) 724
14 610 (24.00) 838 (33.00) 838 (33.00) 854 (33.62) 1130 (44.50) 1125
16 610 (24.00) 864 (34.00) 864 (34.00) 879 (34.61) 1310 (51.60) 1650
Standard Fig. No. 2A1C3
glt valves

Size L L1 L2 H Wt.
W
(In) (RF) (BW) (RTJ) (open) (Kg)
api 600 / asme b16.34

2 250 (10.00) 29 (11.50) 292 (11.50) 295 (11.62) 397 (15.60) 37

2.1/2 250 (10.00) 330 (13.00) 330 (13.00) 333 (13.12) 446 (17.60) 50
class 600

3 350 (14.00) 356 (14.00) 356 (14.00) 359 (14.12) 496 (19.50) 62
4 450 (18.00) 432 (17.00) 432 (17.00) 435 (17.12) 599 (23.60) 150
5 500 (20.00) 508 (20.00) 508 (20.00) 511 (20.12) 700 (27.60) 187
6 560 (22.00) 559 (22.00) 559 (22.00) 562 (22.12) 791 (31.10) 294
8 600 (23.60) 660 (26.00) 660 (26.00) 663 (26.12) 1014 (39.90) 543
10 700 (28.00) 787 (31.00) 787 (31.00) 790 (31.12) 1180 (46.50) 1006
12 610 (24.00) 838 (33.00) 838 (33.00) 841 (33.13) 1397 (55.00) 1350
14 610 (24.00) 889 (35.00) 889 (35.00) 892 (35.12) 1450 (57.10) 1620
16 762 (30.00) 991 (39.00) 991 (39.00) 994 (39.13) 1610 (63.40) 2160
Standard Fig. No. 2A1C6 Unit : mm (inch)

16
globe valve
CAST STEEL GLOBE

Size H Wt.
W L
api 600 / asme b16.34

(In) ( Open ) (Kg)

2 350 (14.00) 292 (11.50) 397 (15.60) 37
2.1/2 350 (14.00) 330 (13.00) 446 (17.60) 50
class 900

3 450 (18.00) 356 (14.00) 496 (19.50) 62

4 500 (20.00) 432 (17.00) 599 (23.60) 150
6 610 (24.00) 559 (22.00) 791 (31.10) 294
8 610 (24.00) 660 (26.00) 1014 (39.90) 543
10 610 (24.00) 787 (31.00) 1180 (46.50) 1006
12 810 (31.90) 838 (33.00) 1397 (55.00) 1350
14 810 (31.90) 889 (35.00) 1450 (57.10) 1620
16 810 (31.90) 991 (39.00) 1610 (63.40) 2160
Standard Fig. No. 2A1C9

Size H Wt.
W L
(In) ( Open ) (Kg)
2 350 (14.00) 368 (14.50) 550 ( 21.70) 85
asme b16.34
class 1500

2.1/2 350 (14.00) 419 (16.50) 572 ( 22.50) 138

api 600

3 500 (20.00) 470 (18.50) 582 ( 22.90) 215

4 560 (22.00) 546 (21.50) 795 ( 31.30) 350
6 610 (24.00) 705 (27.75) 1278 ( 50.30) 560
8 610 (24.00) 832 (32.75) 1960 ( 77.20) 990
10 810 (31.90) 991 (39.00) 2450 ( 96.50) 1530
12 810 (31.90) 1130 (44.50) 2904 (114.30) 2570
Standard Fig. No. 2A1C15
glt valves

Size H Wt.
W L
(In) ( Open ) (Kg)
class 2500

asme b16.34

2 400 (16.00) 451 (17.75) 720 ( 28.30) 176

api 600

2.1/2 500 (20.00) 508 (20.00) 800 ( 31.50) 264

3 560 (22.00) 578 (22.75) 885 ( 34.80) 308
4 610 (24.00) 673 (26.50) 1260 ( 49.60) 759
6 610 (24.00) 914 (36.00) 1905 ( 75.00) 1990
8 610 (24.00) 1022 (40.25) 2465 ( 97.00) 4390
10 810 (31.90) 1270 (50.00) 3108 (122.40) 5290

Standard Fig. No. 2A1C25 Unit : mm (inch)

17
 globe valve
FORGED STEEL GLOBE
BOLTED / WELDED BONNET - REDUCED / FULL PORT

STANDARD PARTS & MATERIAL

No. Parts A105/N LF2 F11 F22 F304/L F316/L F51
A182- A182-
1 Body A105/N A350-LF2 A182-F11 A182-F22 A182-F51
F304/L F316/L
2 Seat Integral Hardfaced Stellite
3 Disc 410 304 420 420 304 316 F51
4 Stem 410 304 410 410 304 316 F51
5 Gasket Flexible Graphite + SS304 / SS316
A182- A182-
6 Bonnet A105/N A350-LF2 A182-F11 A182-F22 A182-F51
F304/L F316/L
7 Bonnet Bolt A193-B7 A193-L7 A193-B16 A193-B8 A193-B8(M)
glt valves

8 Pin SS304
9 Gland 420/304/316
10 Eyebolt A193-B7 A193-L7 A193-B16 A193-B8 A193-B8(M)
11 Gland Flange A105 A105/F304
12 Gland Nut A194-2H A194-8 A194-8(M)
13 Stem Nut 410
14 Handwheel Nut A194-2H
15 Name Plate Aluminium
16 Handwheel A197
18 Gland Packing Flexible Graphite
Other valve material composition are available.

18
globe valve
FORGED STEEL GLOBE
MANUFACTURING STANDARD
General Design API 602
Face To Face ASME/ANSI B16.10
Connection Screw NPT to ANSI B1.20.1,
Socket Weld to ANSI B16.11,
Buttweld to ANSI B16.25
Fire Safe Design API 6FA
Pressure Rating ASME/ANSI B16.34
Inspection & Test API 598 / API 6D
Features Bolted Bonnet/Welded Bonnet,
Outside Screw & Yoke,
Rising Stem

H Wt. H Wt.
Port Size W L d Port Size W L d
(Open) (Kg) (Open) (Kg)
100 79 154 7 100 79 175 7
1/4 2 1/4 3
(3.94) (3.11) ( 6.06) (0.26) (3.94) (3.11) ( 6.89) (0.26)
100 79 158 10 125 92 187 10
1/2 2 1/2 4
(3.94) (3.11) ( 6.22) (0.39) (4.92) (3.62) ( 7.36) (0.39)
100 92 158 13 125 111 187 13
3/4 2 3/4 4
(3.94) (3.62) ( 6.22) (0.51) (4.92) (4.37) ( 7.36) (0.51)
REGULAR

REGULAR
class 1500 - api 602
class 800 - api 602

125 111 192 18 160 120 227 18

1 3 1 6
(4.92) (4.37) ( 7.56) (0.69) (6.30) (4.72) ( 8.94) (0.69)
160 120 227 23 160 152 242 23
1.1/4 6 1.1/4 8
(6.30) (4.72) ( 8.94) (0.91) (6.30) (5.98) ( 9.53) (0.91)
160 152 240 29 180 172 278 29
1.1/2 7 1.1/2 13
(6.30) (5.98) ( 9.45) (1.12) (7.09) (6.77) (10.94) (1.12)
180 172 279 35 200 220 325 35
2 12 2 20
(7.09) (6.77) (10.98) (1.38) (7.87) (8.66) (12.80) (1.38)
100 92 158 13 125 111 187 13
1/2 2 1/2 4
(3.94) (3.62) ( 6.22) (0.51) (4.92) (4.37) ( 7.36) (0.51)
125 111 192 18 160 120 227 18
3/4 4 3/4 6
(4.92) (4.37) ( 7.56) (0.69) (6.30) (4.72) ( 8.94) (0.69)
160 120 227 23 160 152 242 23
1 6 1 8
(6.30) (4.72) ( 8.94) (0.91) (6.30) (5.98) ( 9.53) (0.91)
FULL

FULL

160 152 240 29 180 172 278 29

1.1/4 7 1.1/4 13
(6.30) (5.98) ( 9.45) (1.12) (7.09) (6.77) (10.94) (1.12)
glt valves

180 172 279 36 200 220 325 36

1.1/2 12 1.1/2 20
(7.09) (6.77) (10.98) (1.40) (7.87) (8.66) (12.80) (1.40)
200 220 325 47 200 250 355 47
2 12 2 20
(7.87) (8.66) (12.80) (1.85) (7.87) (9.84) (13.98) (1.85)
Standard Fig. No. 2A2F8 Standard Fig. No. 2A2F15

H Wt.
Port Size W L d
class 2500

( Open ) (Kg)
1/2 160 ( 6.30) 150 (5.90) 249 ( 9.80) 14 (0.55) 8
api 602

3/4 160 ( 6.30) 150 (5.90) 249 ( 9.80) 14 (0.55) 9

REGULAR

1 200 ( 7.87) 170 (6.70) 292 (11.50) 19 (0.75) 13

1.1/4 250 ( 9.84) 200 (7.87) 327 (12.87) 25 (0.98) 21
1.1/2 250 ( 9.84) 200 (7.87) 327 (12.87) 28 (1.10) 21
2 300 (11.81) 250 (9.84) 381 (15.00) 35 (1.38) 36
Standard Fig. No. 2A2F25 Unit : mm (inch)

19
 globe valve
FORGED STEEL GLOBE
MANUFACTURING STANDARD
General Design API 602
Face To Face ASME/ANSI B16.10
Connection Flange to ANSI B16.5
Fire Safe Design API 6FA
Pressure Rating ASME/ANSI B16.34
Inspection & Test API 598 / API 6D
Features Bolted Bonnet/Welded Bonnet,
Outside Screw & Yoke,
Rising Stem, Integral Flange

Size H Wt.
Port W L d
(In) ( Open ) (Kg)
class 150

1/2 100 (3.94) 108 (4.25) 153 ( 6.02) 10 (0.39) 5

api 602

3/4 100 (3.94) 118 (4.63) 158 ( 6.22) 13 (0.51) 7

REGULAR

1 125 (4.92) 127 (5.00) 192 ( 7.56) 18 (0.69) 10

1.1/4 160 (6.30) 140 (5.50) 227 ( 8.94) 23 (0.91) 14
1.1/2 160 (6.30) 165 (6.50) 241 ( 9.49) 29 (1.12) 20
2 180 (7.09) 203 (8.00) 279 (10.98) 35 (1.38) 28
Standard Fig. No. 2A2F1
Size H Wt.
Port W L d
(In) ( Open ) (Kg)
class 300

1/2 100 (3.94) 152 ( 6.00) 158 ( 6.22) 10 (0.39) 5

api 602

3/4 100 (3.94) 178 ( 7.00) 158 ( 6.22) 13 (0.51) 8

REGULAR

1 125 (4.92) 203 ( 8.00) 192 ( 7.56) 18 (0.69) 11

1.1/4 160 (6.30) 216 ( 8.50) 227 ( 8.94) 23 (0.91) 17
1.1/2 160 (6.30) 229 ( 9.00) 241 ( 9.49) 29 (1.12) 2
2 180 (7.09) 267 (10.50) 279 (10.98) 35 (1.38) 33
Standard Fig. No. 2A2F3

Size H Wt.
Port W L d
(In) ( Open ) (Kg)
class 600

1/2 100 (3.94) 165 ( 6.50) 158 ( 6.22) 10 (0.39) 6

api 602

glt valves

3/4 100 (3.94) 190 ( 7.50) 158 ( 6.22) 13 (0.51) 8

REGULAR

1 125 (4.92) 216 ( 8.50) 192 ( 7.56) 18 (0.69) 13

1.1/4 160 (6.30) 229 ( 9.00) 227 ( 8.94) 23 (0.91) 17
1.1/2 160 (6.30) 241 ( 9.50) 241 ( 9.49) 29 (1.12) 24
2 180 (7.09) 292 (11.50) 279 (10.98) 35 (1.38) 39
Standard Fig. No. 2A2F6

Size H Wt.
Port W L d
(In) ( Open ) (Kg)
class 1500

1/2 125 (4.92) 216 ( 8.50) 187 ( 7.36) 10 (0.39) 11

api 602

3/4 125 (4.92) 229 ( 9.00) 187 ( 7.36) 13 (0.51) 13

REGULAR

1 160 (6.30) 254 (10.00) 227 ( 8.94) 18 (0.69) 17

1.1/4 160 (6.30) 279 (10.98) 242 ( 9.53) 23 (0.91) 19
1.1/2 180 (7.09) 305 (12.00) 278 (10.94) 29 (1.12) 25
2 200 (7.87) 368 (14.49) 325 (12.80) 35 (1.38) 31
Standard Fig. No. 2A2F15 Unit : mm (inch)

20