Chapter 3: Verilog HDL

2 IC Design Companies in Vietnam

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
3 Verilog HDL Basics
• EXAMPLES
 What is Verilog

• Hardware Description Language (HDL)

• Hardware description languages such as Verilog
HDL and VHDL became popular
• Developed in 1983
• Standard: IEEE 1364, Dec 1995

4 Verilog HDL Basics

Design flow

5
Verilog HDL Basics
 Popularity of Verilog

Verilog HDL is a general-purpose hardware

description language that is easy tolearn and easy to
use
Verilog HDL allows different levels of abstraction to
be mixed in the same model: gates, RTL, or behavioral
code
Most popular logic synthesis tools support Verilog
HDL
All fabrication vendors provide Verilog HDL libraries
for postlogic synthesis simulation
6 Verilog HDL Basics
Abstraction Levels in Verilog

Behavioral

RTL

Gate

7 Verilog HDL Basics

 Design Methodologies
Top-down design methodology: we define the top-
level block and identify the sub-blocks necessary to
build the top-level block

8 Verilog HDL Basics

 Design Methodologies
Bottom-up design methodology: we first identify the
building blocks that are available to us. We build
bigger cells, using these building blocks

9 Verilog HDL Basics

 Main Language Concepts (i)

• Concurrency

• Structure

10 Verilog HDL Basics

4 bit counter

11 Verilog HDL Basics

4 bit counter, top-down design

12 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
13 Verilog HDL Basics
 Module

A module is the basic building block in Verilog.

A module can be an element or a collection of lower-
level design blocks
A module provides the necessary functionality to the
higher-level block through its port interface (inputs
and outputs)

14 Verilog HDL Basics

 Module
module <module_name> (<module_terminal_list>);
...
<module internals>
...
endmodule

15 Verilog HDL Basics

 Module
Specifically, the T-flipflop could be defined as a module
as follows:
module T_FF (clock, reset, q);
clock q
.
reset
.
T_FF
<functionality of T-flipflop>
.
.
endmodule

16 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
17 Verilog HDL Basics
 Instances
module ripple_carry_counter(clk, reset, q);
output [3:0] q; q[0] q[1] q[2] q[3]
input clk, reset; clk clock q clock q clock q clock q

T_FF tff0(q[0],clk, reset); reset reset reset reset

T_FF tff1(q[1],q[0], reset); reset

T_FF tff2(q[2],q[1], reset);
T_FF tff3(q[3],q[2], reset);
endmodule

18 Verilog HDL Basics

 Instances
module T_FF(q, clk, reset);
output q;
input clk, reset;
wire d;
D_FF dff0(q, d, clk, reset);
not n1(d, q);
endmodule

19 Verilog HDL Basics

20 Verilog HDL Basics
 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
21 Verilog HDL Basics
 User Identifiers
• Formed from {[A-Z], [a-z], [0-9], _, $}, but ..
• .. can’t begin with $ or [0-9]
– myidentifier □
– m_y_identifier □
– 3my_identifier □
– $my_identifier □
– _myidentifier$ □
• Identifiers are case sensitive
– myid ≠ Myid

22 Verilog HDL Basics

 Comments

• // The rest of the line is a comment

• /* Multiple line
comment */

• /* Nesting /* comments */ do NOT work */

23 Verilog HDL Basics

 Verilog Value Set

• 0 represents low logic level or false condition

• 1 represents high logic level or true condition

• x represents unknown logic level

• z represents high impedance logic level

24 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
25 Verilog HDL Basics
 Numbers in Verilog (i)

<size>’<radix> <value>

No of Binary → b or B Consecutive chars

bits Octal → o or O 0-f, x, z
Decimal → d or D
Hexadecimal → h or H

– 8’h ax = 1010xxxx
– 12’o 3zx7 = 011zzzxxx111

26 Verilog HDL Basics

 Numbers in Verilog (ii)

• You can insert “_” for readability

– 12’b 000_111_010_100
– 12’b 000111010100 Represent the same number

– 12’o 07_24
• Bit extension
– MS bit = 0, x or z ⇒ extend this
• 4’b x1 = 4’b xx_x1
– MS bit = 1 ⇒ zero extension
• 4’b 1x = 4’b 00_1x

27 Verilog HDL Basics

 Numbers in Verilog (iii)

• If size is ommitted it
– is inferred from the value or
– takes the simulation specific number of bits or
– takes the machine specific number of bits

• If radix is ommitted too .. decimal is assumed

– 15 = <size>’d 15

28 Verilog HDL Basics

 Parameters in Verilog (iii)

• A parameter associates an identifier name with a

constant. Let the Verilog code include the following
declarations:
parameter n = 4;
parameter S0 = 2’b00, S1 = 2’b01, S2 = 2’b10, S3
= 2’b11;

29 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
30 Verilog HDL Basics
 Signal in Verilog code
• Signal = physical wire = variable without storing
• In Verilog, a signal in a circuit is represented as a net
or a variable with a specific type. The term net is
derived from the electrical jargon, where it refers to
the interconnection of two or more points in a circuit.
A net or variable declaration has the form

type [range] signal_name{signal_name};

31 Verilog HDL Basics

 Nets (i)
• Can be thought as hardware wires driven by logic
• Equal z when unconnected
• Various types of nets
– wire
– wand (wired-AND)
– wor (wired-OR)
– tri (tri-state)
• In following examples: Y is evaluated,
automatically, every time A or B changes
32 Verilog HDL Basics
 Nets (ii)
A wire Y; // declaration
Y
B assign Y = A & B;

wand Y; // declaration
assign Y = A;
A assign Y = B;
Y
B
wor Y; // declaration
assign Y = A;
assign Y = B;

dr
tri Y; // declaration
A Y
assign Y = (dr) ? A : z;

33 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
34 Verilog HDL Basics
 Registers
• Variables that store values
• Do not represent real hardware but ..
• .. real hardware can be implemented with registers
• Only one type: reg
reg A, C; // declaration
// assignments are always done inside a procedure
A = 1;
C = A; // C gets the logical value 1
A = 0; // C is still 1
C = 0; // C is now 0
• Register values are updated explicitly!!
35 Verilog HDL Basics
 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
36 Verilog HDL Basics
 Vectors
• Represent buses
wire [3:0] busA;
reg [1:4] busB;
reg [1:0] busC;

• Left number is MS bit

• Slice management
busC[1] = busA[2];
busC = busA[2:1]; ⇔
busC[0] = busA[1];

• Vector assignment (by position!!)

busB[1] = busA[3];
busB[2] = busA[2];
busB = busA; ⇔
busB[3] = busA[1];
busB[4] = busA[0];
37 Verilog HDL Basics
 Integer & Real Data Types

• Declaration
integer i, k;
real r;

• Use as registers (inside procedures)

i = 1; // assignments occur inside procedure
r = 2.9;
k = r; // k is rounded to 3
• Integers are not initialized!!
• Reals are initialized to 0.0
38 Verilog HDL Basics
 Time Data Type

• Special data type for simulation time measuring

• Declaration
time my_time;

• Use inside procedure

my_time = $time; // get current sim time

• Simulation runs at simulation time, not real time

39 Verilog HDL Basics

 Arrays (i)
• Syntax
integer count[1:5]; // 5 integers
reg var[-15:16]; // 32 1-bit regs
reg [7:0] mem[0:1023]; // 1024 8-bit regs
• Accessing array elements
– Entire element: mem[10] = 8’b 10101010;
– Element subfield (needs temp storage):
reg [7:0] temp;
..
temp = mem[10];
var[6] = temp[2];

40 Verilog HDL Basics

 Arrays (ii)

• Limitation: Cannot access array subfield or entire

array at once
var[2:9] = ???; // WRONG!!
var = ???; // WRONG!!

• No multi-dimentional arrays
reg var[1:10] [1:100]; // WRONG!!

• Arrays don’t work for the Real data type

real r[1:10]; // WRONG !!

41 Verilog HDL Basics

 Strings
• Implemented with regs:
reg [8*13:1] string_val; // can hold up to 13 chars
..
string_val = “Hello Verilog”;
string_val = “hello”; // MS Bytes are filled with 0
string_val = “I am overflowed”; // “I ” is truncated

• Escaped chars:
– \n newline
– \t tab
– %% %
– \\ \
– \“ “

42 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
43 Verilog HDL Basics
 Logical Operators

• && → logical AND

• || → logical OR
• ! → logical NOT
• Operands evaluated to ONE bit value: 0, 1 or x
• Result is ONE bit value: 0, 1 or x
A = 6; A && B → 1 && 0 → 0
B = 0; A || !B → 1 || 1 → 1
C = x; C || B → x || 0 → x but C&&B=0

44 Verilog HDL Basics

 Bitwise Operators (i)

• & → bitwise AND

• | → bitwise OR
• ~ → bitwise NOT
• ^ → bitwise XOR
• ~^ or ^~ → bitwise XNOR

• Operation on bit by bit basis

45 Verilog HDL Basics

 Bitwise Operators (ii)
c = ~a; c = a & b;

• a = 4’b1010;
b = 4’b1100;

c = a ^ b;

• a = 4’b1010;
b = 2’b11;

46 Verilog HDL Basics

 Reduction Operators
• & → AND
• | → OR
• ^ → XOR
• ~& → NAND
• ~| → NOR
• ~^ or ^~ → XNOR

• One multi-bit operand → One single-bit result

a = 4’b1001;
..
c = |a; // c = 1|0|0|1 = 1

47 Verilog HDL Basics

 Shift Operators

• >> → shift right

• << → shift left

• Result is same size as first operand, always zero filled

a = 4’b1010;
...
d = a >> 2; // d = 0010
c = a << 1; // c = 0100

48 Verilog HDL Basics

 Concatenation Operator
• {op1, op2, ..} → concatenates op1, op2, .. to single number
• Operands must be sized !!
reg a;
reg [2:0] b, c;
..
a = 1’b 1;
b = 3’b 010;
c = 3’b 101;
catx = {a, b, c}; // catx = 1_010_101
caty = {b, 2’b11, a}; // caty = 010_11_1
catz = {b, 1}; // WRONG !!
• Replication ..
catr = {4{a}, b, 2{c}}; // catr = 1111_010_101101
49 Verilog HDL Basics
 Relational Operators
• > → greater than
• < → less than
• >= → greater or equal than
• <= → less or equal than

• Result is one bit value: 0, 1 or x

1 > 0 →1
’b1x1 <= 0 →x
10 < z →x
50 Verilog HDL Basics
 Equality Operators
• == → logical equality
Return 0, 1 or x
• != → logical inequality
• === → case equality
Return 0 or 1
• !== → case inequality

– 4’b 1z0x == 4’b 1z0x →x

– 4’b 1z0x != 4’b 1z0x → x
– 4’b 1z0x === 4’b 1z0x → 1
– 4’b 1z0x !== 4’b 1z0x → 0

51 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
52 Verilog HDL Basics
 Conditional Operator

• cond_expr ? true_expr : false_expr

• Like a 2-to-1 mux ..

A
1
Y
Y = (sel)? A : B;
B 0
sel

53 Verilog HDL Basics

 Arithmetic Operators (i)
• +, -, *, /, %

• If any operand is x the result is x

• Negative registers:
– regs can be assigned negative but are treated as unsigned
reg [15:0] regA;
..
regA = -4’d12; // stored as 216-12 = 65524
regA/3 evaluates to 21861

54 Verilog HDL Basics

 Arithmetic Operators (ii)

• Negative integers:
– can be assigned negative values
– different treatment depending on base specification or not
reg [15:0] regA;
integer intA;
..
intA = -12/3; // evaluates to -4 (no base spec)
intA = -’d12/3; // evaluates to 1431655761 (base spec)

55 Verilog HDL Basics

Operator Precedence

Use parentheses to
enforce your
priority

56 Verilog HDL Basics

 Hierarchical Design

Top Level
E.g.
Module

Full Adder
Sub-Module Sub-Module
1 2

Half Adder Half Adder

Basic Module Basic Module Basic Module
1 2 3

57 Verilog HDL Basics

 Module
module my_module(out1, .., inN);

in1 my_module out1 output out1, .., outM;

out2 input in1, .., inN;

in2

f .. // declarations
inN outM .. // description of f (maybe
.. // sequential)

endmodule

Everything you write in Verilog must be inside a module

exception: compiler directives

58 Verilog HDL Basics

 Example: Half Adder

A module half_adder(S, C, A, B);

S
output S, C;
B input A, B;
C
wire S, C, A, B;

assign S = A ^ B;
A S
Half assign C = A & B;
B Adder C
endmodule

59 Verilog HDL Basics

 Example: Full Adder
in1 A Half S I1 A Half S sum
Adder 1 Adder
in2 B C I2 B C I3
ha1 ha2 cout

cin
module full_adder(sum, cout, in1, in2, cin);
output sum, cout;
input in1, in2, cin;

wire sum, cout, in1, in2, cin;

Module wire I1, I2, I3; Instance
name name
half_adder ha1(I1, I2, in1, in2);
half_adder ha2(sum, I3, I1, cin);

assign cout = I2 || I3;

endmodule
60 Verilog HDL Basics
 Hierarchical Names

ha2.A

in1 A Half S I1 A Half S sum

Adder 1 Adder
in2 B C I2 B C I3
ha1 ha2 cout

cin

Remember to use instance names,

not module names

61 Verilog HDL Basics

 Port Assignments

module
• Inputs reg or net net

module

• Outputs reg or net net

module

net net
• Inouts

62 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
63 Verilog HDL Basics
 Continuous Assignements
a closer look
• Syntax:
assign #del <id> = <expr>;

optional net type !!

• Where to write them:
– inside a module
– outside procedures
• Properties:
– they all execute in parallel
– are order independent
– are continuously active
64 Verilog HDL Basics
 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
65 Verilog HDL Basics
 Structural Model (Gate Level)

• Built-in gate primitives:

and, nand, nor, or, xor, xnor, buf, not, bufif0,
bufif1, notif0, notif1

• Usage:
nand (out, in1, in2); 2-input NAND without delay
and #2 (out, in1, in2, in3); 3-input AND with 2 t.u. delay
not #1 N1(out, in); NOT with 1 t.u. delay and instance name
xor X1(out, in1, in2); 2-input XOR with instance name

• Write them inside module, outside procedures

66 Verilog HDL Basics

 Example: Half Adder,
2nd Implementation
A module half_adder(S, C, A, B);
S
output S, C;
B input A, B;
C
wire S, C, A, B;

xor #2 (S, A, B);

and #1 (C, A, B);
Assuming:
• XOR: 2 t.u. delay endmodule
• AND: 1 t.u. delay

67 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
68 Verilog HDL Basics
 Behavioral Model - Procedures (i)
• Procedures = sections of code that we know they
execute sequentially
• Procedural statements = statements inside a
procedure (they execute sequentially)
• e.g. another 2-to-1 mux implem:
begin
if (sel == 0)
Execution Y = B;
Flow Procedural assignments:
else
Y must be reg !!
Y = A;
end
69 Verilog HDL Basics
 Behavioral Model - Procedures (ii)

• Modules can contain any number of procedures

• Procedures execute in parallel (in respect to each
other) and ..
• .. can be expressed in two types of blocks:
– initial → they execute only once
– always → they execute for ever (until simulation finishes)

70 Verilog HDL Basics

 “Initial” Blocks
• Start execution at sim time zero and finish when
their last statement executes
module nothing;

initial
$display(“I’m first”); Will be displayed
at sim time 0
initial begin
#50;
$display(“Really?”); Will be displayed
end at sim time 50

endmodule

71 Verilog HDL Basics

 “Always” Blocks
• Start execution at sim time zero and continue until
sim finishes

72 Verilog HDL Basics

 Events (i)
• @
always @(signal1 or signal2 or ..) begin
..
end execution triggers every
time any signal changes
always @(posedge clk) begin
.. execution triggers every
end
time clk changes
from 0 to 1
always @(negedge clk) begin
.. execution triggers every
end time clk changes
from 1 to 0

73 Verilog HDL Basics

 Examples

• 3rd half adder implem • Behavioral edge-triggered

module half_adder(S, C, A, DFF implem
B); module dff(Q, D, Clk);
output S, C; output Q;
input A, B; input D, Clk;

reg S,C; reg Q;

wire A, B; wire D, Clk;

always @(A or B) begin always @(posedge Clk)

S = A ^ B; Q = D;
C = A && B;
end endmodule

endmodule 74 Verilog HDL Basics

 Events (ii)

• wait (expr)
always begin
wait (ctrl) execution loops every
#10 cnt = cnt + 1; time ctrl = 1 (level
#10 cnt2 = cnt2 + 2; sensitive timing control)
end

• e.g. Level triggered DFF ?

75 Verilog HDL Basics

 Example

always @(res or posedge clk) begin

res if (res) begin
a Y = 0;
b Y W = 0;
end
else begin
c W Y = a & b;
W = ~c;
clk end
end

76 Verilog HDL Basics

 Timing (i)

d
initial begin
#5 c = 1; c
#5 b = 0;
#5 d = c; b
end
0 5 10 15
Time
Each assignment is
blocked by its previous one

77 Verilog HDL Basics

 Timing (ii)

d
initial begin
fork c
#5 c = 1;
#5 b = 0; b
#5 d = c;
join 0 5 10 15
end Time

Assignments are
not blocked here

78 Verilog HDL Basics

 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
79 Verilog HDL Basics
 Procedural Statements: if
E.g. 4-to-1 mux:
module mux4_1(out, in, sel);
output out;
if (expr1) input [3:0] in;
true_stmt1; input [1:0] sel;

reg out;
else if (expr2) wire [3:0] in;
wire [1:0] sel;
true_stmt2;
.. always @(in or sel)
if (sel == 0)
else out = in[0];
def_stmt; else if (sel == 1)
out = in[1];
else if (sel == 2)
out = in[2];
else
out = in[3];
endmodule
80 Verilog HDL Basics
 Procedural Statements: case
E.g. 4-to-1 mux:
module mux4_1(out, in, sel);
case (expr) output out;
input [3:0] in;
input [1:0] sel;
item_1, .., item_n: stmt1;
reg out;
item_n+1, .., item_m: stmt2; wire [3:0] in;
.. wire [1:0] sel;

default: def_stmt; always @(in or sel)

case (sel)
0: out = in[0];
endcase 1: out = in[1];
2: out = in[2];
3: out = in[3];
endcase
endmodule

81 Verilog HDL Basics

Procedural Statements: for
for (init_assignment; cond; step_assignment)
stmt;
E.g.
module count(Y, start);
output [3:0] Y;
input start;

reg [3:0] Y;
wire start;
integer i;

initial
Y = 0;

always @(posedge start)

for (i = 0; i < 3; i = i + 1)
#10 Y = Y + 1;
endmodule

82 Verilog HDL Basics

 Procedural Statements: while
E.g.
module count(Y, start);
output [3:0] Y;
input start;

reg [3:0] Y;
wire start;
integer i;
while (expr) stmt;
initial
Y = 0;

always @(posedge start) begin

i = 0;
while (i < 3) begin
#10 Y = Y + 1;
i = i + 1;
end
end
endmodule
83 Verilog HDL Basics
 Procedural Statements: repeat

E.g.
module count(Y, start);
output [3:0] Y;
input start;

repeat (times) stmt; reg [3:0] Y;

wire start;

initial
Can be either an Y = 0;
integer or a variable
always @(posedge start)
repeat (4) #10 Y = Y + 1;
endmodule

84 Verilog HDL Basics

 Procedural Statements: forever

Typical example:
clock generation in test modules
module test;

reg clk; Tclk = 20 time units

forever stmt;
initial begin
clk = 0;
forever #10 clk = ~clk;
Executes until sim end
finishes
other_module1 o1(clk, ..);
other_module2 o2(.., clk, ..);

endmodule

85 Verilog HDL Basics

 Mixed Model
Code that contains various both structure and behavioral styles
module simple(Y, c, clk, res);
output Y;
input c, clk, res;

reg Y;
wire c, clk, res;
res wire n;
c n Y not(n, c); // gate-level
clk
always @(res or posedge clk)
if (res)
Y = 0;
else
Y = n;
endmodule
86 Verilog HDL Basics
 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
87 Verilog HDL Basics
 System Tasks
Always written inside procedures

• $display(“..”, arg2, arg3, ..); → much like printf(), displays formatted string
in std output when encountered
• $monitor(“..”, arg2, arg3, ..); → like $display(), but .. displays string each
time any of arg2, arg3, .. Changes
• $stop; → suspends sim when encountered
• $finish; → finishes sim when encountered
• $fopen(“filename”); → returns file descriptor (integer); then, you can use
$fdisplay(fd, “..”, arg2, arg3, ..); or $fmonitor(fd, “..”, arg2, arg3, ..); to write
to file
• $fclose(fd); → closes file
• $random(seed); → returns random integer; give her an integer as a seed

88 Verilog HDL Basics

$display & $monitor string format

89 Verilog HDL Basics

 Compiler Directives
• `include “filename” → inserts contents of file into current file; write it
anywhere in code ..

• `define <text1> <text2> → text1 substitutes text2;

– e.g. `define BUS reg [31:0] in declaration part: `BUS data;

• `timescale <time unit>/<precision>

– e.g. `timescale 10ns/1ns later: #5 a = b;

50ns

90 Verilog HDL Basics

 Parameters
in[3:0] p_in[3:0]
out[2:0]
wu
A. Implelementation
without parameters
wd
clk
module dff4bit(Q, D, clk); module dff2bit(Q, D, clk);
output [3:0] Q; output [1:0] Q;
input [3:0] D; input [1:0] D;
input clk; input clk;

reg [3:0] Q; reg [1:0] Q;

wire [3:0] D; wire [1:0] D;
wire clk; wire clk;

always @(posedge clk) always @(posedge clk)

Q = D; Q = D;

endmodule endmodule
91 Verilog HDL Basics
 Parameters
(ii)
module top(out, in, clk);
output [1:0] out;
A. Implelementation input [3:0] in;
input clk;
without parameters (cont.)
wire [1:0] out;
wire [3:0] in;
wire clk;

wire [3:0] p_in; // internal nets

wire wu, wd;

assign wu = p_in[3] & p_in[2];

assign wd = p_in[1] & p_in[0];

dff4bit instA(p_in, in, clk);

dff2bit instB(out, {wu, wd}, clk);
// notice the concatenation!!

endmodule
92 Verilog HDL Basics
 Parameters
(iii)
module top(out, in, clk);
B. Implelementation output [1:0] out;
with parameters input [3:0] in;
input clk;
wire [1:0] out;
module dff(Q, D, clk); wire [3:0] in;
wire clk;
parameter WIDTH = 4;
output [WIDTH-1:0] Q; wire [3:0] p_in;
input [WIDTH-1:0] D; wire wu, wd;
input clk;
assign wu = p_in[3] & p_in[2];
reg [WIDTH-1:0] Q; assign wd = p_in[1] & p_in[0];
wire [WIDTH-1:0] D;
wire clk; dff instA(p_in, in, clk);
// WIDTH = 4, from declaration
always @(posedge clk) dff instB(out, {wu, wd}, clk);
Q = D; defparam instB.WIDTH = 2;
// We changed WIDTH for instB only
endmodule
endmodule
93 Verilog HDL Basics
 Outline
• Verilog?
• Module
• Instances
• User Identifiers
• Numbers in Verilog
• Signal and Nets in Verilog
• Registers
• Vectors and Arrays
• Logical vs Bitwise Operators
• Conditional Operator
• Continuous Assignments
• Structural Model (Gate Level)
• Behavioral Model – Procedures: Initial vs Always
• Procedural Statements: If – case – for
• System Tasks
94 Verilog HDL Basics
• EXAMPLES
 Encoder - Using if-else Statement

• http://www.asic-
world.com/examples/verilog/encoder.html#Encod
er_-_Using_if-else_Statement

95 Verilog HDL Basics

 Encoder - Using case Statement

• http://www.asic-
world.com/examples/verilog/encoder.html#Encod
er_-_Using_if-else_Statement

96 Verilog HDL Basics

 Pri-Encoder - Using if-else Statement

• http://www.asic-
world.com/examples/verilog/pri_encoder.html#Pri
ority_Encoders

97 Verilog HDL Basics

 Encoder - Using assign Statement

• http://www.asic-
world.com/examples/verilog/pri_encoder.html#Pri
ority_Encoders

98 Verilog HDL Basics

 Decoder - Using case Statement

• http://www.asic-
world.com/examples/verilog/decoder.html#Decod
er_-_Using_case_Statement

99 Verilog HDL Basics

 Decoder - Using assign Statement

• http://www.asic-
world.com/examples/verilog/decoder.html#Decod
er_-_Using_case_Statement

100 Verilog HDL Basics

Mux : Using assign Statement

101 Verilog HDL Basics

Mux : Using if Statement

102 Verilog HDL Basics

Mux : Using case Statement

103 Verilog HDL Basics

 Testing Your Modules

Input output

Testbench Verilog Module

104 Verilog HDL Basics

 Testing Your Modules
module top_test;
wire [1:0] t_out; // Top’s signals
reg [3:0] t_in;
reg clk;

top inst(t_out, t_in, clk); // Top’s instance

initial begin // Generate clock

clk = 0;
forever #10 clk = ~clk;
end

initial begin // Generate remaining inputs

$monitor($time, " %b -> %b", t_in, t_out);
#5 t_in = 4'b0101;
#20 t_in = 4'b1110;
#20 t_in[0] = 1;
#300 $finish;
end

endmodule

105 Verilog HDL Basics