Oxygen Sensor OOA101
Use the advantages:
• PTB-A 18.10 approved
• Meet BAR 97 requirements
• Certified quality management system
• Accurate and reliable response
• Excellent selectivity against CO2
• Excellent signal stability
• High product quality
• Short delivery times
• Technical support
• Made in Germany
• 15 months warranty
„We keep your devices operating at their best.“ Mechanical drawing (All dimensions in mm)
EnviteC has been developing and manufacturing highly spe-
cialized products for medical applications and innovative prod- Ø14,4
ucts within the gas measurement technology for environmental,
industrial and safety applcations.
The company trusts in the quality of advanced production meth-
34,8
41,4
ods and processes. The result are oxygen sensors for automo-
tive emission gas analysers, which share the same extraordi-
nary quality, excellent signal stability and reliable response for
accurate readings. These sensors for measuring the partial
pressure of oxygen are designed to meet the BAR standards
and have been approved according to PTB-A 18.10. 5/8-24UNEF*(M16x1)
Ø28
EnviteC´s research and development activities are consistently
aligned to customer and market needs – identification and opti- Ø29
mization of sustainable product solutions are the main concerns
of the company. 3 PIN Molex Connector
Locking Latch
From standard sensors to customized sensors (-) (+)
Experienced EnviteC engineers analyze customer require-
ments. This input is used for different standard and OEM ap-
plications, and ongoing support is provided right up to the final
integraton in the solution. EnviteC designs customized sensors
characterized by a maximum possible degree of precision.
For more information please contact us!
We look forward to assisting you either on the phone or in
a personal talk.
General tolerances ISO 2768-c
*Intermediate thread: Metric / Unified Extra Fine
Technical Specifications OOA101
Measurement range 0 % ... 100 % oxygen (at atmospheric pressure)
Nominal sensor lifetime ≥ 500 000 % volume oxygen hours
Output in ambient air 7 mV ... 13 mV
Electrical interface 3 pin (Molex® 22-04-1031)
Accuracy 0 % … 3.3 % oxygen: ± 0.1 % absolute
3.4 % … 100 % oxygen: ± 3 % relative
Linearity error < 3 % relative
Response time < 5 s to 90 % of final value; < 40 s fall time from 20.95 % to 0.1 % oxygen
(when 100 % nitrogen applied)
Zero offset voltage < 40 µV in 100 % nitrogen
Cross interference < 0.1 % oxygen response to:
15 % CO2 balance N2; 10 % CO balance N2; 3000 ppm NO balance N2;
3000 ppm C3H8 balance N2; 500 ppm H2S balance N2; 500 ppm SO2 balan-
ce N2; 1000 ppm benzene balance N2
Influence of humidity -0.03 % rel. per % RH at 25 °C
Pressure range 0.6 bar … 2 bar (ppO2 0 … 1250 mbar O2)
Influence of pressure proportional to change in oxygen partial pressure
Influence of mechanical shock < 1 % relative after a fall from 1 m
Operating temperature 0 °C … +50 °C
Temperature compensation built-in NTC compensation
Effect of temperature compensation between +25 °C and +40 °C: 3 % relative error
(steady state) between 0 °C and +50 °C: 8 % relative error
Operating humidity 0 % … 99 % RH non-condensing
Long term output drift < 1 % volume oxygen per month
typically < -15 % relative over lifetime
Storage temperature -20 °C ... +50 °C
Recommended storage +5 °C … +15 °C
Recommended load ≥ 10 kOhm
Warm-up time < 30 minutes, after replacement of sensor
Weight approximately 28 grams
Part number 01-00-0030
All specifications are applicable at standard conditions:
1013 hPa, 25 °C dry ambient air
Certified Quality Management
EnviteC is maintaining a quality management system, which
meets the requirements of EN ISO 13485 for medical devices.
EnviteC-Wismar GmbH Doc. No. 001-05-OOA101-0
a Honeywell Company April 2017
Technical information is subject
Alter Holzhafen 18, 23966 Wismar, Germany to change without notice!
Phone: +49 (0)3841-360-1 © 2017 Honeywell International Inc.
Phone: +49 (0)3841-360-200
Fax: +49 (0)3841-360-222 EnviteC by Honeywell reserves the
right to make changes in product
Internet: www.envitec.com specifications and adjust its production
Email:
[email protected] at any time and without notice.
