Data sheet 6GK7443-1EX30-0XE0

product type designation CP 443-1

Communications processor CP 443-1; 2x 10/100 Mbit/s (IE switch); RJ45
ports; ISO; TCP; UDP; PROFINET IO controller; S7 communication; Open
communication (SEND/ RECEIVE); S7 routing; IP configuration via DHCP/
Block; IP Access Control List; Time synchronization; extended web
diagnostics; Fast Startup; Support for PROFIenergy;

transfer rate
transfer rate
● at the 1st interface 10 ... 100 Mbit/s
interfaces
number of interfaces / acc. to Industrial Ethernet 2
number of electrical connections
● at the 1st interface / acc. to Industrial Ethernet 2
type of electrical connection
● at the 1st interface / acc. to Industrial Ethernet RJ45 port
design of the removable storage
● C-PLUG No
supply voltage, current consumption, power loss
type of voltage / of the supply voltage DC
supply voltage / 1 / from backplane bus 5V
relative symmetrical tolerance / at DC
● at 5 V 5%
consumed current
● from backplane bus / at DC / at 5 V / typical 1.4 A
power loss [W] 7.25 W
ambient conditions
ambient temperature
● during operation 0 ... 60 °C
● during storage -40 ... +70 °C
● during transport -40 ... +70 °C
relative humidity
● at 25 °C / without condensation / during operation / 95 %
maximum
protection class IP IP20
design, dimensions and weights
module format Compact module S7-400 single width
width 25 mm
height 290 mm
depth 210 mm
net weight 0.7 kg
product features, product functions, product components / general
number of units

6GK74431EX300XE0 Subject to change without notice

5.19.2021
Page 1/3 © Copyright Siemens
 ● per CPU / maximum 14
● note max. 4 as PN IO ctrl.
performance data / open communication
number of possible connections / for open communication 64
/ by means of SEND/RECEIVE blocks / maximum
data volume
● as user data per ISO connection / for open 8 Kibyte
communication / by means of SEND/RECEIVE blocks
/ maximum
● as user data per ISO on TCP connection / for open 8 Kibyte
communication / by means of SEND/RECEIVE blocks
/ maximum
● as user data per TCP connection / for open 8 Kibyte
communication / by means of SEND/RECEIVE blocks
/ maximum
● as user data per UDP connection / for open IE 2 Kibyte
communication / by means of SEND/RECEIVE blocks
/ maximum
number of possible connections / for open communication
● by means of T blocks / maximum 64
data volume
● as user data per ISO on TCP connection / for open 1452 byte
communication / by means of T blocks / maximum
performance data / S7 communication
number of possible connections / for S7 communication
● maximum 128; when using several CPUs
● with PG connections / maximum 2
performance data / multi-protocol mode
number of active connections / with multi-protocol mode 128
performance data / PROFINET communication / as PN IO controller
product function / PROFINET IO controller Yes
number of PN IO devices / on PROFINET IO controller / 128
operable / total
number of PN IO IRT devices / on PROFINET IO 64
controller / operable
number of external PN IO lines / with PROFINET / per 4
rack
data volume
● as user data for input variables / as PROFINET IO 4 Kibyte
controller / maximum
● as user data for output variables / as PROFINET IO 4 Kibyte
controller / maximum
● as user data for input variables per PN IO device / 1433 byte
as PROFINET IO controller / maximum
● as user data for output variables per PN IO device / 1433 byte
as PROFINET IO controller / maximum
● as user data for input variables per PN IO device / 240 byte
for each sub-module as PROFINET IO controller /
maximum
● as user data for output variables per PN IO device / 240 byte
for each sub-module as PROFINET IO controller /
maximum
product functions / management, configuration, engineering
product function / MIB support Yes
protocol / is supported
● SNMP v1 Yes
● DCP Yes
● LLDP Yes
configuration software
● required STEP 7 V5.5 SP3 or higher / STEP 7 Professional V12 (TIA Portal) or
higher
product functions / diagnostics
product function / web-based diagnostics Yes

6GK74431EX300XE0 Subject to change without notice

5.19.2021
Page 2/3 © Copyright Siemens
product functions / switch
product feature / switch Yes
product function
● switch-managed No
● with IRT / PROFINET IO switch Yes
● configuration with STEP 7 Yes
product functions / redundancy
product function
● ring redundancy Yes
● redundancy manager Yes
protocol / is supported / Media Redundancy Protocol Yes
(MRP)
product functions / security
product function
● password protection for Web applications No
● ACL - IP-based Yes
● ACL - IP-based for PLC/routing No
● switch-off of non-required services Yes
● blocking of communication via physical ports Yes
● log file for unauthorized access No
product functions / time
product function / SICLOCK support Yes
product function / pass on time synchronization Yes
protocol / is supported
● NTP Yes
standards, specifications, approvals / hazardous environments
certificate of suitability / CCC / for hazardous zone Yes
according to GB standard
further information / internet-Links
Internet-Link
● to web page: selection aid TIA Selection Tool http://www.siemens.com/tia-selection-tool
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Industry Mall https://mall.industry.siemens.com
● to website: Information and Download Center http://www.siemens.com/industry/infocenter
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx-Download-Manager http://www.siemens.com/cax
● to website: Industry Online Support https://support.industry.siemens.com
security information
security information Siemens provides products and solutions with industrial security
functions that support the secure operation of plants, solutions,
machines, equipment and/or networks. They are important components
in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens
recommends strongly that you regularly check for product updates. For
the secure operation of Siemens products and solutions, it is necessary
to take suitable preventive action(e.g. cell protection concept) and
integrate each component into a holistic, state-of-the-art industrial
security concept. Third-party products that may be in use should also be
considered. For more information about industrial security, visit
http://www.siemens.com/industrialsecurity. To stay informed about
product updates as they occur, sign up for a product-specific newsletter.
For more information, visit http://support.automation.siemens.com.
(V3.4)

last modified: 1/24/2021

6GK74431EX300XE0 Subject to change without notice

5.19.2021
Page 3/3 © Copyright Siemens