SCM automatic worktables
SCM AUTOMATIC WORKTABLES
Suction cups and clamps Manual positioning (TVN worktable)
TVN-SET
Bars Automatic simultaneous positioning of each bar
Suction cups and clamps Automatic positioning of each element through belt
EASYSET
Bars Automatic simultaneous positioning of each bar
Suction cups and clamps Automatic simultaneous positioning of each
element
AUTOSET
Bars Automatic simultaneous positioning of each bar
Ideal for the machining of linear workpieces with
TVN-SET different length
Manual positioning of
clamps or suction cups.
Automatic positioning of
bars according to workpiece
program.
TVN worktable which can be
fitted with all Record
accessories, both H=50 and
H=110.
TVN-SET Traverse system.
Each bar is equipped with a motor allowing the automatic positioning and its control
even after a manual intervention.
TVN-SET Machining of linear components of windows.
Manual positioning of clamps
according to the references on
the bars.
Automatic bars’ positioning
through CN.
Machining of linear components of windows with
TVN-SET different lengths than the previous ones.
If components have different
lengths than the previous ones:
• Clamps position is not
modified.
• It is sufficient to re-position the
bars in order to recover the
difference created.
Machining of linear components of windows with
TVN-SET different lengths than the previous ones.
In few seconds TVN-SET
worktable is automatically
re-positioned, without any
manual intervention from the
operator, in order to process
a new machining in safe
conditions.
TVN-SET Machining of solid wood door composed of 5
elements.
Rails are positioned
on the right half-table
on which 3 stops
have been added for
the referencing of
the central rail.
Stiles positioned on the left half-table with reference to the
upper and rear stops on the machine base.
Machining of solid wood door composed of 5
TVN-SET elements with different length from the previous
ones.
If the length of
components is
increased:
• The position of stops
and suction cups is not
modified
• It is sufficient to re-
position the bars in order
to recover the difference
created.
Machining of solid wood door composed of 5
TVN-SET elements with different length from the previous
ones.
In few seconds TVN-
SET worktable is
automatically
re-positioned, without
any manual
intervention from the
operator, in order to
process a new
machining in safe
conditions.
EASYSET Ideal for the processing of pre-finished workpieces.
Automatic simultaneous
positioning of bars according to
workpiece program.
Automatic positioning of suction
cups and clamps according to
workpiece program.
On each bar it is possible to fit up
to 4 plates for the clamping of
clamps or suction cups.
Automatic blowers for the cleaning
of guides during the displacement.
EASYSET traverse system
Displacement on THK guides
Magnetic surveyor for the control
of clamps or suction cups’
positioning even after a manual
intervention.
Belt for the positioning pf clamps
Motor for bar and suction cups
displacement
Motor for belt displacement
EASYSET System for the clamping of the base to the belt
Pneumatic
pistons
Reference for
the clamping
Driving belt
Processing of 4 elements of a rectangular sash on
EASYSET half-table
Clamps (or suction cups) are
positioned as much near as
possible in order to make
workpieces loading easier.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
Loading and clamping of
workpieces. From every
workpiece we have one rail
and one stile.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
Workpieces are
automatically positioned.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
Through a saw blade cut we
have on rail and one stile.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
Rails are spaced in order to
be processed along three
sides.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
After the processing the first
line of workpieces is fixed
on the other side through
the un-used clamps.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
Using the central clamps we
repeat the same operation
also for the second line of
workpieces.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
Unused clamps are moved
away in order to process
without any risk of collision.
Processing of 4 elements of a rectangular sash on
EASYSET half-table
After the complete
machining, workpieces are
positioned on the operator
side for an easy unloading.
EASYSET push-buttons for the manual unlocking of clamps
One push-
button for the
unlock of
each clamp
EASYSET Unlocking of finished workpieces
To remove the workpiece
locked with the second line
of clamps it is sufficient to
push the second push-button
of one of the three used
bars.
The three clamps are
unlocked automatically.
The other workpieces still
continue to be clamped
avoiding their fall.
EASYSET Unlocking of finished workpieces
For unloading the workpiece
fixed with the first line of
clamps the operation is the
same. In this case the push-
button is the first.
EASYSET Unlocking of finished workpieces
The process is the same for
the third workpiece.
EASYSET Unlocking of finished workpieces
The process is the same
also for the last processed
workpiece.
EASYSET New positioning
In few seconds EASYSET
worktable is automatically
ready for a new machining
without any manual
intervention by the operator.
Ideal for the machining of pre-finished
AUTOSET workpieces and little batches production.
Automatic simultaneous
positioning of suction cups and
clamps according to workpiece
program.
Time for positioning: 4 seconds.
On each bar it is possible to fit up
to 4 bases for the fixing of clamps
or suction cups.
Automatic blowers for the cleaning
of guides during the displacement.
AUTOSET traverse system
Displacement on THK guides
Each clamp or suction cup
has its own motor controlling
the position even after a
manual or casual
intervention.
Motor for bar
displacement
AUTOSET accessories EASYSET
Strong suction cups
Strong clamps ensuring workpiece locking even with
for the clamping of
heavy duty stock removal.
components with
different shapes.
AUTOSET accessories EASYSET
H=110 clamp Device for Single Horizontal
short horizontal double clamp
workpieces clamp
AUTOSET accessories EASYSET
Suction cup Suction cup Suction cup Suction cup
145x145x110 145x55x110 180x65x110 200x40x110
AUTOSET accessories EASYSET
Suction cup Suction cup Suction cup Suction cup
90x90x110 150x150 150x40 150x275
