Doc Ref.

KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

Material Specification of Hanger :

Install Quantity/Unit : 4 set hangers (2 longs ; 2 short)
Request order : 4 Set for Long Hanger
: 4 set, for Short Hanger
Steel Material :
1. Solid bar Diameter 30 mm for long and Diameter 25 mm for short,
Carbon steel S 45 C with coating primer & top coat
2. Bolt set (washer, spring washer, double nut. Bolt: Carbon steel 8.8 Nm, L: 100mm, with threaded 40mm)
3. U Plate : Carbon steel S 45 C
Without Rubber absorbent
Detail Specification see the drawing
Required : Mill and COM is required
Warranty : 6 months
Picture for reference :

Short Hanger of Vibrating Feeder rear side

Drawing
Long Hanger of Vibrating Feeder front side for reference
Long Hanger has broken (rapture)
1. Long Hanger
1/4
 Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

Plate,
t: 40 mm

12 12

2/4
 Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

2. Short Hanger

12 12

3/4
 Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

Long Hanger Short Hanger

4/4
 Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

5/4
 Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

SPECIFICATION OF HOOK HANGER LIMESTONE VIBRATING FEEDER

Hook Hanger installed : 4 pcs

Spare parts to be purchased : 6 pcs, (2 pcs for stock in trouble shooting or emergency case)

Existing Hook Hanger broken (rapture)

condition

Existing Hook Hanger temporary

welded with threaded screw

Existing Hook Hanger :

1. Material : SUS 304
Upgrade material & dimension
2. Diameter : 20 MM
New Hook Hanger Note :
Materials : VCN 150 Due to rainy season and wet limestone
Diameter : 25 mm handling condition(overweight), the hook
Diameter Ulir : M 24 mm hangers has broken, however we improve
Complete with : Double Nut, Flat & Spring Washer with upgrade the material and dimension to
get the stronger hook hangers.
Hook Hanger dimension

6/4
 Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

214259 : HOOK, HANGER, FOR VIBRATING FEEDER, MATERIAL VCN 150, DIAMETER 25 MM,
THREADED DIA. : M 24, INCLUDING NUT & WASHER
206688 : HANGER, FOR VIBRATING FEEDER, SHORT
206687 : HANGER, FOR VIBRATING FEEDER, LONG

7/4