ISO Update

Supplement to ISOfocus

December 2019
 International Standards in process
ISO/CD Road vehicles — Electrically propelled road
21782-7 vehicles — Test specification for electric pro-
pulsion components — Part 7: Operating load
An International Standard is the result of an agreement between
testing of DC/DC converter
the member bodies of ISO. A first important step towards an Interna-
tional Standard takes the form of a committee draft (CD) - this is cir- TC 23 Tractors and machinery for agriculture
culated for study within an ISO technical committee. When consensus and forestry
has been reached within the technical committee, the document is
sent to the Central Secretariat for processing as a draft International ISO/CD 10522 Agricultural irrigation equipment — Direct-
Standard (DIS). The DIS requires approval by at least 75 % of the acting pressure-regulating valves
member bodies casting a vote. A confirmation vote is subsequently ISO/CD 11738 Agricultural irrigation equipment — Control
carried out on a final draft International Standard (FDIS), the approval heads
criteria remaining the same.
ISO/CD 16438 Agricultural irrigation equipment — Thermo-
plastic collapsible hoses for irrigation — Speci-
fications and test methods
ISO/CD Tractors and machinery for agriculture and
23316-1 forestry — Electrical high power interface
700VDC/480VAC — Part 1: General description
ISO/CD Tractors and machinery for agriculture and
23316-2 forestry — Electrical high power interface
CD registered ISO/CD
700VDC/480VAC — Part 2: Physical interface
Tractors and machinery for agriculture
23316-3 and forestry — Electrical high power in-
terface 700VDC/480VAC — Part 3: Safety
Period from 01 November to 01 December 2019
requirements
These documents are currently under consideration in the technical
ISO/CD Tractors and machinery for agriculture and
committee.
23316-4 forestry — Electrical high power interface
They have been registred at the Central Secretariat. 700VDC/480VAC — Part 4: AC operation mode
ISO/CD Tractors and machinery for agriculture and
23316-5 forestry — Electrical high power interface
TC 2 Fasteners
700VDC/480VAC — Part 5: DC operation mode
ISO/CD 14581 Fasteners — Hexalobular socket countersunk
ISO/CD Tractors and machinery for agriculture
flat head screws with reduced loadability
23316-6 and forestry — Electrical high power inter-
TC 8 Ships and marine technology face 700VDC/480VAC — Part 6: Controls
ISO/CD TS Ships and marine technology — Performance communication
22152.2 requirements for low bio-persistence alkaline ISO/CD Tractors and machinery for agriculture and
earth silicate wool 23316-7 forestry — Electrical high power interface
700VDC/480VAC — Part 7: Mechanical
TC 17 Steel
integration
ISO/DIS 630-2 Structural steels — Part 2: Technical delivery
conditions for structural steels for general TC 31 Tyres, rims and valves
purposes ISO/CD 5775-2 Bicycle tyres and rims — Part 2: Rims
ISO/CD 630-3 Structural steels — Part 3: Technical delivery TC 34 Food products
conditions for fine-grain structural steels
ISO/DIS 23970 Milk, milk products and infant formulae —
ISO/CD 630-4 Structural steels — Part 4: Technical delivery Determination of melamine and cyanuric acid
conditions for high-yield-strength quenched in foodstuffs by liquid chromatography and
and tempered structural steel plates tandem mass spectrometry (LC-MS/MS)
TC 20 Aircraft and space vehicles ISO 4833- Microbiology of the food chain — Horizontal
ISO/CD 23670 Space systems — Vibration testing 1:2013/CD method for the enumeration of microorgan-
Amd 1 isms — Part 1: Colony count at 30 degrees C
TC 22 Road vehicles by the pour plate technique — Amendment 1:
ISO/CD Road vehicles — Component test methods for Clarification of scope
11452-9.2 electrical disturbances from narrowband radiat- ISO 4833- Microbiology of the food chain — Horizontal
ed electromagnetic energy — Part 9: Portable 2:2013/CD method for the enumeration of microorganisms
transmitters Amd 1 — Part 2: Colony count at 30 degrees C by the
ISO/CD 13837 Road vehicles — Safety glazing materi- surface plating technique — Amendment 1:
als — Method for the determination of solar Clarification of scope
transmittance ISO/CD 4120 Sensory analysis — Methodology — Triangle
ISO/CD Electrically propelled road vehicles — Test test sensory
21782-4 specification for electric propulsion compo- ISO/CD 8586 Sensory analysis — General guidelines for the
nents — Part 4: Performance testing of DC/DC selection, training and monitoring of selected
converter assessors and expert sensory assessors
ISO/CD Electrically propelled road vehicles — Test TC 38 Textiles
21782-5 specification for electric propulsion compo-
nents — Part 5: Operating load testing of ISO/CD 22958 Textiles — Water resistance — Rain tests:
motor system exposure to a horizontal water spray
ISO/CD 1973 Textile fibres — Determination of linear density
— Gravimetric method and vibroscope method

ISO Update, Supplement to ISO Focus -- December 2019 1

 ISO/CD 2403 Textiles — Cotton fibres — Determination of ISO/CD Industrial trucks — Sustainability — Part 2:
micronaire value 23434-2 Factors and reporting
ISO/CD 16549 Textiles — Unevenness of textile strands — TC 121 Anaesthetic and respiratory equipment
Capacitance method
ISO/CD Transportable liquid oxygen systems for medi-
TC 42 Photography 18777-1 cal use — Particular requirements — Part 1:
Base units
ISO/CD Photography — Archiving systems — Image
19264-1 quality analysis — Part 1: Reflective originals ISO/CD Transportable liquid oxygen systems for medi-
18777-2 cal use — Particular requirements — Part 2:
TC 43 Acoustics
Portable units
ISO/CD 5128 Acoustics — Measurement of noise inside mo-
tor vehicles
TC 123 Plain bearings
ISO/CD 3548-1 Plain bearings — Thin-walled half bearings with
TC 58 Gas cylinders
or without flange — Part 1: Tolerances, design
ISO/CD 23826 Gas cylinders — Ball valves — Specification features and methods of test
and type testing
ISO/CD Plain bearings — Hydrodynamic plain tilting
ISO/CD 11623 Gas cylinders — Composite cylinders and 12130-1 pad thrust bearings under steady-state condi-
tubes — Periodic inspection and testing tions — Part 1: Calculation of tilting pad thrust
ISO/CD Gas cylinders — Cylinders and tubes of com- bearings
23876.2 posite construction — Acoustic emission (AE) TC 130 Graphic technology
testing for periodic inspection and testing
ISO/CD 2836.4 Graphic technology — Prints and printing
TC 59 Buildings and civil engineering works inks — Assessment of resistance of prints to
ISO/CD 6707-4 Buildings and civil engineering works — Vo- various agents
cabulary — Part 4: Facility management terms ISO/CD 12635 Graphic technology — Plates for offset printing
— Dimensions
TC 61 Plastics
ISO/CD 14298 Graphic technology — Management of security
ISO/CD 23524 Plastics — Determination of fracture toughness
printing processes
of films and thin sheets: the essential work of
fracture TC 135 Non-destructive testing
TC 83 Sports and other recreational facilities ISO/CD 22290 Non-destructive testing — Infrared thermo-
and equipment graphic testing — Thermoelastic stress meas-
uring method — General Principles
ISO/CD 7152 Camping tents and caravan awnings — Terms
TC 138 Plastics pipes, fittings and valves for
TC 85 Nuclear energy, nuclear technologies,
the transport of fluids
and radiological protection
ISO/CD Plastics piping systems for the supply of gase-
ISO/CD TR Quality management systems — Recommen-
16486-5 ous fuels — Unplasticized polyamide (PA-U)
4450 dations for the application of ISO 19443
piping systems with fusion jointing and me-
ISO/CD 6980-1 Nuclear energy — Reference beta-particle chanical jointing — Part 5: Fitness for purpose
radiation — Part 1: Methods of production of the system
ISO/CD 6980-2 Nuclear energy — Reference beta-particle ISO/CD 7432 Glass-reinforced thermosetting plastics (GRP)
radiation — Part 2: Calibration fundamentals pipes and fittings — Test methods to prove
related to basic quantities characterizing the the design of locked socket-and-spigot joints,
radiation field including double-socket joints, with elasto-
ISO/CD 6980-3 Nuclear energy — Reference beta-particle meric seals
radiation — Part 3: Calibration of area and ISO/CD Plastics piping systems for the supply of
personal dosemeters and the determination of 16486-4 gaseous fuels — Unplasticized polyamide
their response as a function of beta radiation (PA-U) piping systems with fusion jointing and
energy and angle of incidence mechanical jointing — Part 4: Valves
TC 92 Fire safety TC 147 Water quality
ISO/CD TS Fire safety — Statistical data collection — Part ISO/CD 10703 Water quality — Determination of the activity
17755-2 2: Definition of terms concentration of radionuclides — Method by
ISO/CD TR Guidance for assessing the validity of physical high resolution gamma-ray spectrometry
16312-2 fire models for obtaining fire effluent toxicity TC 150 Implants for surgery
data for fire hazard and risk assessment — Part
ISO/CD TS Implants for surgery — Standard guide to as-
2: Evaluation of individual physical fire models
20721 sessment of absorbable metallic implants
TC 96 Cranes ISO 13779- Implants for surgery — Hydroxyapatite — Part
ISO/CD Cranes — Design calculation for rail wheels 3:2018/CD 3: Chemical analysis and characterization of
16881-1 and associated trolley track supporting struc- Amd 1 crystallinity ratio and phase purity — Amend-
ture — Part 1: ment 1
TC 106 Dentistry TC 156 Corrosion of metals and alloys
ISO/CD 24234 Dentistry — Dental amalgam ISO/CD 24020 Corrosion of metals and alloys Standard test
method for particle-free erosion corrosion of
TC 107 Metallic and other inorganic coatings
metallic materials by jet-in-slit
ISO/CD 1463 Metallic and oxide coatings — Measurement of
coating thickness — Microscopical method TC 172 Optics and photonics
ISO/CD 4518 Metallic coatings — Measurement of coating ISO/CD 8600-8 Endoscopes — Medical endoscopes and en-
thickness — Profilometric method dotherapy devices — Part 8: Particular require-
ments for capsule endoscopes
TC 110 Industrial trucks
ISO/CD Industrial trucks — Sustainability — Part 1:
23434-1 Vocabulary

2 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/CD Microscopes — Definition and measurement of ISO/CD Cryogenic vessels — Pressure-relief accesso-
19056-3 illumination properties — Part 3: Incident light 21013-1 ries for cryogenic service — Part 1: Reclosable
fluorescence microscopy with incoherent light pressure-relief valves
sources
TC 255 Biogas
ISO/CD 9342-1 Optics and optical instruments — Test lenses
ISO/CD 24252 Biogas systems — non-household and
for calibration of focimeters — Part 1: Refer-
non-gasification
ence lenses for focimeters used for measuring
spectacle lenses TC 258 Project, programme and portfolio
ISO/CD Ophthalmic instruments — Fundamental management
15004-2 requirements and test methods — Part 2: Light ISO/CD 21502 Project, Programme and Portfolio Management
hazard protection — Guidance on Project Management
ISO/CD 15253 Ophthalmic optics and instruments — Optical TC 286 Collaborative business relationship
and electro-optical devices for enhancing low management
vision
ISO/CD 44003 Guidelines for micro, small and medium-sized
ISO/CD 15798 Ophthalmic implants — Ophthalmic viscosurgi- enterprises on the implementation of the
cal devices principles of collaborative business relationship
TC 173 Assistive products management
ISO/CD Assistive products for walking, manipulated by TC 300 Solid Recovered Fuels
11199-1 both arms — Requirements and test methods ISO/CD 22940 Solid recovered fuels — Determination of
– — Part 1: Walking frames elemental composition by X-ray fluorescence
ISO/CD Assistive products for walking, manipulated by JTC 1 Information technology
11199-2 both arms — Requirements and test methods
— Part 2: Rollators ISO/IEC CD Information technology — International string
14651 ordering and comparison — Method for com-
TC 174 Jewellery and precious metals paring character strings and description of the
ISO/DIS 24016 Jewellery and precious metals — Grading pol- common template tailorable ordering
ished diamonds — Terminology, classification ISO/IEC Information technology — Security techniques
and test methods 10118-1:2016/ — Hash-functions — Part 1: General —
TC 202 Microbeam analysis CD Amd 1 Amendment 1
ISO/CD 23692 Quantitative analysis of Mn dendritic segrega- ISO/IEC CD Information security controls
tion in continuously cast steel product 27002

TC 204 Intelligent transport systems ISO/IEC CD Information technology — Security techniques

27022 — Guidance on ISMS processes
ISO/CD TS Intelligent transport systems — Roadside mod-
20684-10 ules SNMP data interface — Part 10: Variable ISO/IEC CD Information Technology — Security techniques
message signs 27099 — Public key infrastructure — Practices and
policy framework
ISO/CD 22737 Intelligent transport systems — Low-speed au-
tomated driving (LSAD) systems for predefined ISO/IEC CD TS Information technology — Security techniques
routes — Performance requirements, system 27101 — Cybersecurity — Framework development
requirements and performance test procedures guidelines

TC 206 Fine ceramics ISO/IEC CD Information technology — Office equipment —

23385 Method for measuring digital photo print out
ISO/CD 21820 Fine ceramics (advanced ceramics, advanced time
technical ceramics) — Ultraviolet photolumi-
nescence image test method for analyzing ISO/IEC Information technology — Multimedia applica-
polytypes of conductive SiC crystals 23000- tion format (MPEG-A) — Part 21: Visual identity
21:2019/CD management application format — Amendment
TC 212 Clinical laboratory testing and in vitro Amd 1 1: Reference software and conformance
diagnostic test systems
ISO/IEC FDIS Information technology — Dynamic adaptive
ISO/CD 23118 Molecular in vitro diagnostic examinations — 23009-1/CD streaming over HTTP (DASH) — Part 1: Media
Specifications for pre-examination processes Amd 1 presentation description and segment formats
for metabolomics in urine, venous blood serum — Amendment 1: CMAF support, events
and plasma processing model and other extensions
TC 213 Dimensional and geometrical product ISO/IEC CD Information technology — Coded representa-
specifications and verification 23090-2 tion of immersive media — Part 2: Omnidirec-
tional media format
ISO/CD Geometrical product specifications (GPS) —
16610-45 Filtration — Part 45: Part 45: Profile Morpho- ISO/IEC CD Information technology — Coded representa-
logical: Segmentation 23090-6 tion of immersive media — Part 6: Immersive
media metrics
TC 215 Health informatics
ISO/IEC CD Information technology — Coded representa-
ISO/CD TR Health informatics — Introduction to Ayurveda 23090-10 tion of immersive media — Part 10: Carriage of
4421 Video-based Point Cloud Compression Data
ISO/CD TS Health informatics, requirements for medication ISO/IEC CD General video coding — Part 2: Low complex-
22703 safety alerts 23094-2 ity enhancement video coding
TC 216 Footwear ISO/IEC CD Information technology — Automatic identifi-
ISO/CD 19957 Footwear — Test methods for heels — Heel pin 23634 cation and data capture techniques — Poly-
holding strength chrome bar code symbology (JAB-Code)
TC 220 Cryogenic vessels ISO/IEC CD TR Information technology — Business operational
15944-14 view — Part 14: Open-edi, model and cloud
ISO/CD 21011 Cryogenic vessels — Valves for cryogenic computing architecture
service
ISO/IEC CD TR Information technology database languages —
19075-9 SQL technical reports — Part 9: SQL TR OLAP

ISO Update, Supplement to ISO Focus -- December 2019 3

 ISO/IEC CD Information technology — Metamodel frame- ISO/DIS Road vehicles — Clock exten-
19763-16 work for interoperability (MFI) — Part 16: Meta- 20794-7 sion peripheral interface (CXPI)
model for document model registration — Part 7: Data link and physical 2020-02-05
layer conformance test plan
ISO/IEC CD TR Conceptual model and system architecture of
4338 smart classroom ISO/DIS Road vehicles — Fuse-links —
8820-10 Part 10: Fuse-links with tabs
ISO/IEC CD TR Reference Model for ICT Evaluation in
Type L (high current miniature) 2020-02-07
4339 Education
ISO/IEC CD TR Information technology – Cloud computing – (Revision of ISO 8820-10:2015)
23951 Guidance for using the cloud SLA metric model
ISO/DIS Internal combustion engines —
ISO/IEC CD Artificial intelligence — Concepts and 6621-3 Piston rings — Part 3: Material
22989 terminology specifications 2020-02-11

(Revision of ISO 6621-3:2000)

ISO/DIS 22561 Gasoline engines with direct fuel
injection (GDI engines) — In-
stallation of the injectors to the 2020-02-06
engine

DIS circulated ISO/DIS

13044-2
Road vehicles — Fully automatic
coupling systems 24 V (FACS)
for heavy commercial vehicle 2020-02-19
combinations — Part 2: Electri-
Period from 01 November to 01 December 2019 cal and pneumatic interface for
50 mm fifth wheel couplings
These documents have obtained substantial support within the ap- (Revision of ISO 13044-2:2013)
propriate ISO technical committee.
TC 23 Tractors and machinery for
They have been submitted to the ISO member bodies for voting by
agriculture and forestry
the date shown.
ISO/DIS 23130 Milking and cooling machine
* Available in English only
installations — Monitoring device
for bulk milk cooling tanks 2020-01-24
— Requirements
Vote ISO/DIS 21191 Equipment for crop protection —
terminates Closed transfer systems (CTS) —
Performance specification 2020-02-14
TC 2 Fasteners
ISO/DIS 4042 Fasteners — Electroplated coat- TC 29 Small tools
ing systems ISO/DIS 8405 Tools for moulding — Ejec-
2020-02-06 tor sleeves with cylindrical
head — Basic series for general 2020-01-28
(Revision of ISO 4042:2018) purposes
TC 8 Ships and marine (Revision of ISO 8405:2013)
technology ISO/DIS Tools for pressing — Guide
9182-3 pillars — Part 3: Type B, end-
ISO/DIS 22547 Ships and marine technology —
locking pillars 2020-01-28
Performance test procedure for
high-pressure pump in LNG Fuel 2020-01-28
(Revision of ISO 9182-3:2013)
Gas Supply Systems (FGSS) for
ship ISO/DIS Tools for pressing — Guide pil-
9182-4 lars — Part 4: Type C, pillars with
ISO/DIS 22548 Ships and marine technology
taper lead and bush 2020-01-29
— Performance test procedure
of vessel LNG Fuel Gas Supply 2020-01-28
(Revision of ISO 9182-4:2013)
Systems (FGSS)
ISO/DIS Tools for pressing — Guide
ISO/DIS 799-2 Ships and marine technol-
9182-5 pillars — Part 5: Type D, end-
ogy — Pilot ladders — Part 2:
locking pillars with flange 2020-01-28
Maintenance, use, survey, and 2020-02-19
inspection
(Revision of ISO 9182-5:2013)
TC 17 Steel ISO/DIS 23481 Tools for pressing — Cam driver
ISO/DIS Classification of steel based on plates
4948.2 chemical composition 2020-01-28
2020-01-03
(Revision of ISO 23481:2013)
(Revision of ISO 4948-1:1982,
TC 34 Food products
ISO 4948-2:1981)
ISO/DIS Microbiology of the food chain
TC 22 Road vehicles 23036-1 — Methods for the detection of
ISO/DIS Road vehicles — Clock exten- Anisakidae L3 larvae in fish and 2020-01-27
20794-5 sion peripheral interface (CXPI) fishery products — Part 1: UV-
— Part 5: Application layer 2020-02-05 press method
conformance test plan
ISO/DIS Microbiology of the food chain
ISO/DIS Road vehicles — Clock exten- 23036-2 — Methods for the detection
20794-6 sion peripheral interface (CXPI) of Anisakidae L3 larvae in fish 2020-01-27
— Part 6: Transport and network 2020-02-05 and fishery products — Part 2:
layer conformance test plan Artificial digestion method

4 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/DIS 20784 Guidance on substantiation for TC 76 Transfusion, infusion
sensory and consumer claims and injection, and blood
2020-02-03 processing equipment for
medical and pharmaceuti-
TC 35 Paints and varnishes cal use
ISO/DIS 2810 Paints and varnishes — Natural ISO/DIS 719 Glass — Hydrolytic resistance of
weathering of coatings — Expo- glass grains at 98 degrees C —
sure and assessment 2020-02-11 Method of test and classification 2020-02-20

(Revision of ISO 2810:2004) (Revision of ISO 719:1985)

TC 37 Language and terminology ISO/DIS 720 Glass — Hydrolytic resistance of
glass grains at 121 degrees C —
ISO/DIS Language resources manage-
Method of test and classification 2020-02-20
24617-2 ment — Semantic annotation
framework (SemAF) — Part 2: 2020-02-05
Dialogue acts (Revision of ISO 720:1985)
(Revision of ISO 24617-2:2012) TC 86 Refrigeration and
TC 38 Textiles air-conditioning
ISO/DIS Textiles — Quantitative chemi- ISO 5149- Refrigerating systems and heat
1833-25 cal analysis — Part 25: Mixtures 1:2014/DAmd pumps — Safety and environ-
of polyester with certain other 2020-02-20 2 mental requirements — Part 1: 2020-02-03
fibres (method using trichloro- Definitions, classification and se-
acetic acid and chloroform) lection criteria — Amendment 2
(Revision of ISO 1833-25:2013) ISO 5149- Refrigerating systems and heat
TC 44 Welding and allied 3:2014/DAmd pumps — Safety and environ-
1 mental requirements — Part 3: 2020-02-03
processes
Installation site — Amendment 1
ISO/DIS Welding consumables — Test
ISO/DIS 21978 Heat pump water heater —
15792-2 methods — Part 2: Preparation
Testing and rating at part load
of single-run and two-run tech- 2020-02-05
conditions and calculation on 2020-02-06
nique test specimens in steel
seasonal coefficient of perfor-
(Revision of ISO 15792-2:2000)
mance for space heating
TC 54 Essential oils
TC 96 Cranes
ISO/DIS 19332 Essential oil of matricaria [Matri-
ISO/DIS Cranes — Vocabulary — Part 4:
caria chamomilla L. syn. Chamo-
4306-4 Jib cranes
milla recutita (L) Rauschert] 2020-02-06
2020-01-31
(Revision of ISO 19332:2007)
TC 106 Dentistry
TC 58 Gas cylinders
ISO/DIS 10873 Dentistry — Denture adhesives
ISO/DIS 17871 Gas cylinders — Quick-release
cylinder valves — Specification
2020-02-20
and type testing 2020-02-20
(Revision of ISO 10873:2010)
(Revision of ISO 17871:2015,
ISO 17871:2015/Amd 1:2018) TC 107 Metallic and other inorgan-
TC 67 Materials, equipment and ic coatings
offshore structures for pe- ISO/DIS 12671 Thermal spraying - Thermally
troleum, petrochemical and sprayed coatings - Symbolic
natural gas industries representation on drawings 2020-02-13

ISO/DIS Petroleum and natural gas indus- (Revision of ISO 12671:2012)

15590-2 tries — Factory bends, fittings
and flanges for pipeline transpor- 2020-01-27 ISO/DIS 16866 Metallic and other inorganic
tation systems — Part 2: Fittings coatings — Simultaneous thick-
(Revision of ISO 15590-2:2003) ness and electrode potential 2020-02-03
determination of individual layers
ISO/DIS Petroleum and natural gas indus- in multilayer nickel deposits
15590-3 tries — Factory bends, fittings (STEP test)
and flanges for pipeline transpor- 2020-01-27
tation systems — Part 3: Flanges ISO/DIS 23363 Electrodeposited coatings and
(Revision of ISO 15590-3:2004) related finishes — Electroless Ni-
P-ceramic composite coatings 2020-02-10
TC 69 Applications of statistical
methods
TC 120 Leather
ISO/DIS Control charts — Part 4: Cumu-
ISO Leather — Leather for dress
7870-4 lative sum charts
14930:2012/ gloves — Specification —
2020-01-28
DAmd 1 Amendment 1: Colour fastness 2020-01-31
to to-and-fro rubbing
(Revision of ISO 7870-4:2011)
ISO/DIS 16337 Application of statistical and
TC 121 Anaesthetic and respiratory
related methods to new technol- equipment
ogy and product development 2020-01-31
process — Robust Tolerance
Design (RTD)

ISO Update, Supplement to ISO Focus -- December 2019 5

 ISO/DIS 26825 Anaesthetic and respira- ISO/DIS 23226 Corrosion of metals and alloys —
tory equipment — User-applied Guidelines for corrosion testing
labels for syringes containing 2020-01-31 of metals and alloys exposed in 2020-01-29
drugs used during anaesthe- deep sea water
sia — Colours, design and
TC 161 Controls and protective
performance
(Revision of ISO 26825:2008) devices for gas and/or oil
ISO/DIS 4135 Anaesthetic and respiratory ISO/DIS Gas pressure safety and control
equipment — Vocabulary and 23555-1 devices for use in gas transmis-
semantics 2020-02-18 sion, distribution and installa- 2020-01-24
tions for inlet pressures up to
(Revision of ISO 4135:2001) and including 10 MPa — Part 1:
General requirements
TC 126 Tobacco and tobacco
TC 172 Optics and photonics
products
ISO/DIS Optics and photonics — Test
ISO/DIS 23921 Cigarettes — Determination of
21395-1 method for refractive index of
tobacco specific nitrosamines in
optical glasses — Part 1: Mini- 2020-01-28
mainstream cigarette smoke un- 2020-01-31
mum deviation method
der intense smoking conditions
— Method using LC-MS/MS TC 183 Copper, lead, zinc
ISO/DIS 23922 Cigarettes — Determination and nickel ores and
of selected carbonyls in the concentrates
mainstream smoke of cigarettes 2020-01-31 ISO Copper, lead, zinc and nickel
under intense smoking condi- 12743:2018/ concentrates — Sampling proce-
tions — Method using high per- DAmd 1 dures for determination of metal 2020-02-18
formance liquid chromatography and moisture content — Amend-
ISO/DIS 23923 Cigarettes — Determination ment 1
of selected volatile organic TC 184 Automation systems and
compounds in the mainstream 2020-02-03
integration
smoke of cigarettes under
intense smoking conditions — ISO/DIS Automation systems and integra-
Method using GC/MS 16400-1 tion — Equipment behaviour
catalogues for virtual production 2020-02-19
TC 131 Fluid power systems system — Part 1: Overview
ISO/DIS Hydraulic fluid power — Hous-
TC 204 Intelligent transport
7425-1 ings for elastomer-energized,
plastic-faced seals — Dimen- 2020-01-24
systems
sions and tolerances — Part 1: ISO/DIS Intelligent transport systems
Piston seal housings 17515-2 — Evolved universal terrestrial
(Revision of ISO 7425-1:1988) radio access network (E-UTRAN) 2020-01-24
— Part 2: Device to device com-
ISO/DIS Hydraulic fluid power — Hous-
munications (D2D)
7425-2 ings for elastomer-energized,
plastic-faced seals — Dimen- 2020-01-24 ISO/DIS Intelligent transport systems —
sions and tolerances — Part 2: 20529-2 Framework for Green ITS (G-ITS)
Rod seal housings standards — Part 2: Integrated 2020-02-12
(Revision of ISO 7425-2:1989) mobile service applications
TC 134 Fertilizers, soil conditioners TC 205 Building environment
and beneficial substances design
ISO/DIS 22862 Fertilizers and soil conditioners ISO/DIS Energy performance of buildings
— Compound fertilizer — Gen- 52127-1 — Building management system
eral requirements 2020-01-29 — Part 1: Module M10-12 2020-01-24

TC 146 Air quality TC 207 Environmental

ISO/DIS Indoor air — Part 28: Determina- management
16000-28 tion of odour emissions from ISO/DIS 14091 Adaptation to climate change
building products using test 2020-02-06 — Guidelines on vulnerability,
chambers impacts and risk assessment 2020-02-17
(Revision of ISO 16000-28:2012)
TC 149 Cycles TC 212 Clinical laboratory testing
ISO/DIS Cycles — Safety requirements and in vitro diagnostic test
4210-10.2 for bicycles — Part 10: Safety re- systems
quirements for electrically power 2020-01-20 ISO/DIS In vitro diagnostic test systems
assisted cycles (EPACs) 17822-2 — Nucleic acid amplification-
TC 156 Corrosion of metals and based examination procedures 2020-01-31
alloys for detection and identification
of microbial pathogens — Part 2:
ISO/DIS 22910 Corrosion of metals and alloys Laboratory quality practice guide
— Measurement of the elec-
trochemical critical localized 2020-01-27 TC 215 Health informatics
corrosion temperature (E-CLCT) ISO/DIS Health informatics — Service
for stacked Ti alloys fabricated 12967-1 architecture (HISA) — Part 1:
by the additive manufacturing Enterprise viewpoint 2020-01-24
method
(Revision of ISO 12967-1:2009)

6 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/DIS Health informatics — Service ISO/IEC DIS Information technology — Open
12967-2 Architecture (HISA) — Part 2: 30118-2 Connectivity Foundation (OCF)
Information viewpoint 2020-01-24 Specification — Part 2: Security 2020-02-18
specification
(Revision of ISO 12967-2:2009) (Revision of ISO/IEC
30118-2:2018)
ISO/DIS Health informatics — Service
12967-3 Architecture (HISA) — Part 3: ISO/IEC DIS Information technology — Open
Computational viewpoint 2020-01-24 30118-3 Connectivity Foundation (OCF)
Specification — Part 3: Bridging 2020-02-18
(Revision of ISO 12967-3:2009) specification
(Revision of ISO/IEC
ISO/DIS 21860 Health Informatics — Reference
30118-3:2018)
standards portfolio (RSP) —
Clinical imaging 2020-01-24 ISO/IEC DIS Information technology — Open
30118-4 Connectivity Foundation (OCF)
Specification — Part 4: Resource 2020-02-18
ISO/DIS Health software and health IT
type specification
81001-1 systems safety, effectiveness
(Revision of ISO/IEC
and security — Part 1: Founda- 2020-02-02
30118-4:2018)
tional principles, concepts, and
terms ISO/IEC DIS Information technology — Open
30118-5 Connectivity Foundation (OCF)
TC 216 Footwear
Specification — Part 5: Smart 2020-02-18
ISO/DIS 24267 Friction — Test methods for cas- home device specification
ual footwear and components (Revision of ISO/IEC
2020-02-06 30118-5:2018)
ISO/IEC DIS Information technology — Open
TC 228 Tourism and related 30118-6 Connectivity Foundation (OCF)
services Specification — Part 6: Resource 2020-02-18
to AllJoyn interface mapping
ISO/DIS 22876 Tourism and related services
specification
— Bareboat charter — Sup-
(Revision of ISO/IEC
plementary charter services and 2020-02-05
30118-6:2018)
experiences
ISO/IEC DIS Information technology - Open
TC 260 Human resource 30118-7 Connectivity Foundation (OCF)
management Specification — Part 7: Wi-Fi 2020-02-18
ISO/DIS 30415 Human resource management — easy setup specification
Diversity and inclusion ISO/IEC DIS Information technology — open
2020-02-19 30118-8 connectivity foundation (OCF)
- Part 8 - cloud specification — 2020-02-18
TC 282 Water reuse Part 8: Cloud Specification
ISO/DIS Guidelines for performance ISO/IEC DIS Information technology — Open
20468-4 evaluation of treatment technolo- 30118-9 connectivity foundation (OCF) —
gies for water reuse systems — 2020-02-19 Part 9: OCF resource to oneM2M 2020-02-18
Part 4: UV Disinfection resource mapping specification
ISO/DIS Guidelines for performance ISO/IEC DIS Information technology — Open
20468-6 evaluation of treatment technolo- 9594-11 systems interconnection — The
gies for water reuse systems 2020-02-20 directory — Part 11: Proto- 2020-02-14
— Part 6: Ion exchange and col specifications for secure
electrodialysis operations

TC 298 Rare earth ISO/IEC DIS Systems and software engi-

23531 neering — Capabilities of issue
ISO/DIS Rare earth — Terms and defini- management tools 2020-02-10
22444-1 tions — Part 1: Minerals, oxides
and other compounds 2020-02-03
ISO/IEC DIS Information technology — Radio
18046-3 frequency identification device
ISO/DIS Rare earth — Terms and defini- performance test methods — 2020-02-19
22444-2 tions — Part 2: Metals and their Part 3: Test methods for tag
alloys 2020-02-03 performance
(Revision of ISO/IEC
TC 304 Healthcare organization 18046-3:2012)
management ISO/IEC DIS Information technology — Con-
ISO/DIS 22956 Healthcare organization manage- 19823-16 formance test methods for secu-
ment— Guidelines for patient rity service crypto suites — Part 2020-02-19
centered staffing 2020-02-05 16: Crypto suite ECDSA-ECDH
security services for air interface
communications
JTC 1 Information technology
ISO/IEC DIS Information technology — Radio
ISO/IEC DIS Information technology — Open 29160 frequency identification for item
30118-1 Connectivity Foundation (OCF) management — RFID Emblem 2020-02-19
Specification — Part 1: Core 2020-02-18
specification (Revision of ISO/IEC
(Revision of ISO/IEC 29160:2012)
30118-1:2018)

ISO Update, Supplement to ISO Focus -- December 2019 7

 ISO/IEC DIS Information technology — Vir- ISO/FDIS Paper, board and pulps — De-
22121-2 tual keyboards user interfaces 6588-2 termination of pH of aqueous
— Part 2: On-screen keyboards 2020-02-14 extracts — Part 2: Hot extraction 2020-01-16
with direct touch interface
(Revision of ISO 6588-2:2012)
ISO/IEC DIS Information technology — Bio-
19795-1 metric performance testing and ISO/FDIS Paper and board — Determina-
reporting — Part 1: Principles 2020-02-19 2493-2 tion of resistance to bending —
and framework Part 2: Taber-type tester 2020-01-09
(Revision of ISO/IEC
19795-1:2006) (Revision of ISO 2493-2:2011)
TC 8 Ships and marine
technology
ISO/PRF Ships and marine technology —
20661 Cutter suction dredger supervi-
sory and control systems
ISO/PRF Ships and marine technology —
FDIS circulated 20662 Hopper dredger supervisory and
control systems
ISO/PRF Ships and marine technology —
20663 Grab dredger supervisory and
Period from 01 November to 01 December 2019
control systems
These Final draft International Standards have been submitted to the
ISO/FDIS 5480 Ships and marine technology —
ISO member bodies for formal approval by the date shown
Guardrails for cargo ships
* Available in English only 2020-01-17

(Revision of ISO 5480:1979)

Vote ISO/PRF Ships and marine technology —
terminates 23121-1 Inflatable buoyancy support sys-
tems against flooding of ships
— Part 1: Gas supply system
PC 303 Guidelines on consumer
warranties and guarantees ISO/PRF Ships and marine technology —
23121-2 Inflatable buoyancy support sys-
ISO/PRF Guidelines on consumer tems against flooding of ships
22059 warranties/guarantees — Part 2: Buoyancy chamber
ISO/PRF Ships and marine technology —
PC 320 Tableware, giftware, jewel- 23430 Specification of high manganese
lery and luminaries, made austenitic steel thin strips used
of glass - Glass clarity for LNG tanks on board ships
- Classification and test TC 10 Technical product
method documentation
ISO/PRF Tableware, giftware, jewellery ISO/FDIS Technical product documenta-
24117 and luminaries, made of glass 21143 tion — Requirements for digital
— Glass clarity — Classification mock-up virtual assembly test 2020-01-08
and test method for mechanical products
TC 1 Screw threads TC 12 Quantities and units
ISO 68-1:1998/ ISO general purpose screw ISO/FDIS Quantities and units — Part 8:
PRF Amd 1 threads — Basic profile — Part 80000-8.2 Acoustics
1: Metric screw threads — 2020-01-16
Amendment 1
ISO 68-2:1998/ ISO general-purpose screw (Revision of ISO 80000-8:2007)
PRF Amd 1 threads — Basic profile — Part TC 17 Steel
2: Inch screw threads — Amend-
ment 1 ISO/FDIS 439 Steel and cast irons — Deter-
mination of silicon content —
ISO ISO miniature screw threads — Gravimetric method 2019-12-31
1501:2009/ Amendment 1: The figure for the
PRF Amd 1 tolerance zone of external thread (Revision of ISO 439:1994)
ISO/PRF 2904 ISO metric trapezoidal screw ISO/FDIS 9647 Steels — Determination of
threads — Basic dimensions vanadium content — Flame
atomic absorption spectrometric 2019-12-30
(Revision of ISO 2904:1977) method (FAAS)
TC 4 Rolling bearings (Revision of ISO 9647:1989)
ISO Rolling bearings — Symbols for ISO/FDIS 4986 Steel castings - Magnetic parti-
15241:2012/ physical quantities — Amend- cle testing
PRF Amd 1 ment 1 2019-12-31

TC 6 Paper, board and pulps (Revision of ISO 4986:2010)

ISO/FDIS Paper, board and pulps — De- ISO/FDIS 4987 Steel castings - Liquid penetrant
6588-1 termination of pH of aqueous ex- testing
tracts — Part 1: Cold extraction 2020-01-10 2019-12-31

(Revision of ISO 6588-1:2012) (Revision of ISO 4987:2010)

8 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/PRF Steel and iron castings — Visual ISO/FDIS Refrigerated hydrocarbon fluids
11971 testing of surface quality 21903 — Dynamic measurement —
Requirements and guidelines for 2020-01-08
(Revision of ISO 11971:2008) the calibration and installation
of flowmeters used for lique-
TC 20 Aircraft and space vehicles
fied natural gas (LNG) and other
ISO/PRF Air cargo equipment — Restraint refrigerated hydrocarbon fluids
16049-1 straps — Part 1: Design criteria
and testing methods
TC 34 Food products
(Revision of ISO 16049-1:2013) ISO/TS 26030 Social responsibility and sustain-
able development — Guidance
ISO/PRF Air cargo equipment — Restraint
on using ISO 26000:2010 in the
16049-2 straps — Part 2: Utilization
food chain
requirements and recommenda-
tions and lashing calculations ISO/FDIS 665 Oilseeds — Determination of
(Revision of ISO 16049-2:2013) moisture and volatile matter
content 2020-01-28
ISO/PRF Space link extension — Cross
23103 support transfer service —
(Revision of ISO 665:2000)
Specification framework
ISO/PRF Milk — Bacterial count — Proto-
ISO/PRF Space link extension — Cross
16297 col for the evaluation of alterna-
23104 support transfer service — Moni-
tive methods
tored data service
(Revision of ISO 16297:2013)
ISO/FDIS Space systems — Program man-
ISO/PRF Milk and milk products —
22137 agement — Test reviews
23291 Guidelines for the application
2020-01-20
of in-line and on-line infrared
spectrometry
ISO/FDIS Categorization and classifica-
ISO/PRF Milk-based infant formula
21895 tion of civil unmanned aircraft
23293 powders — Quantification of
systems 2020-01-13
whey protein content by sodium
dodecyl sulfate-capillary gel
TC 22 Road vehicles electrophoresis (SDS-CGE)
ISO/FDIS Road vehicles — Unified diag- ISO 6887- Microbiology of the food chain
14229-8 nostic services (UDS) — Part 8: 3:2017/FDAmd — Preparation of test samples,
USD on Clock eXtension Periph- 2020-01-14 1 initial suspension and decimal 2020-01-21
eral Interface (UDSonCXPI) dilutions for microbiological
ISO/FDIS Road vehicles — In-vehicle examination — Part 3: Specific
21111-4 Ethernet — Part 4: General rules for the preparation of fish
requirements and test meth- 2020-01-15 and fishery products — Amend-
ods of optical gigabit Ethernet ment 1: Sample preparation for
components raw marine gastropods

ISO/FDIS Electrically propelled road TC 37 Language and terminology

17409 vehicles — Conductive power ISO/FDIS Language resource management
transfer — Safety requirements 2020-01-17 24613-2 — Lexical markup framework
(LMF) — Part 2: Machine read- 2020-01-17
(Revision of ISO 17409:2015) able dictionary (MRD) model
ISO/PRF TR Road vehicles — Human perfor- (Revision of ISO 24613:2008)
21959-1 mance and state in the context TC 38 Textiles
of automated driving — Part 1:
Common underlying concepts ISO/PRF 2648 Wool — Determination of fibre
(Revision of ISO/TR length distribution parameters —
21959-1:2018) Capacitance method
(Revision of ISO 2648:1974)
TC 23 Tractors and machinery for
TC 44 Welding and allied
agriculture and forestry
processes
ISO/FDIS Agricultural machinery — Safety
4254-6.2 — Part 6: Sprayers and liquid ISO/FDIS Health and safety in welding and
fertilizer distributors 2020-01-15 21904-1 allied processes — Equipment
for capture and separation of 2019-12-30
(Revision of ISO 4254-6:2009) welding fume — Part 1: General
requirements
TC 24 Particle characterization (Revision of ISO 15012-4:2016)
including sieving
TC 45 Rubber and rubber
ISO/PRF Particle size analysis — Laser products
13320 diffraction methods
ISO/PRF 8789 Rubber hoses and hose as-
(Revision of ISO 13320:2009) semblies for liquefied petro-
leum gas in motor vehicles
TC 28 Petroleum and related — Specification
products, fuels and lu- (Revision of ISO 8789:2018)
bricants from natural or ISO/FDIS Rubber — Analysis by pyrolytic
synthetic sources 7270-1 gas-chromatographic meth-
ods — Part 1: Identification of 2019-12-30
polymers (single polymers and
polymer blends)
(Revision of ISO 7270-1:2003,
ISO 7270-1:2003/Amd 1:2010)

ISO Update, Supplement to ISO Focus -- December 2019 9

 ISO/PRF 7725 Rubber and rubber products — ISO/ASTM Practice for use of calorimetric
Determination of chlorine and FDIS 51631 dosimetry systems for dose
bromine content measurements and dosimetry 2020-01-15
(Revision of ISO 7725:1991) system calibration in electron
beams
TC 54 Essential oils
(Revision of ISO/ASTM
ISO/FDIS 3475 Essential oil of aniseed (Pimp- 51631:2013)
inella anisum L.)
ISO/FDIS Radiological protection — Moni-
2020-01-01
20031 toring and dosimetry for internal
exposures due to wound con- 2020-01-17
(Revision of ISO 3475:2002)
tamination with radionuclides
ISO/FDIS Essential oil of clementine (Citrus
21631 clementina hort. ex Tanaka syn.
TC 86 Refrigeration and
Citrus reticulata Blanco x Citrus 2020-01-01 air-conditioning
sinensis (L.) Osbeck), Spanish ISO/PRF 916 Testing of refrigerating systems
type
TC 61 Plastics
(Revision of ISO/R 916:1968)
ISO/FDIS 75-1 Plastics — Determination of tem-
perature of deflection under load TC 91 Surface active agents
— Part 1: General test method 2020-01-21 ISO/FDIS 685 Analysis of soaps — Determina-
tion of total alkali content and
(Revision of ISO 75-1:2013) total fatty matter content 2020-01-16
ISO/FDIS Plastics — Polyetheretherketone
23153-1 (PEEK) moulding and extrusion (Revision of ISO 685:1975)
materials — Part 1: Designa- 2020-01-20 TC 92 Fire safety
tion system and basis for
specifications ISO/FDIS Reaction to fire tests — Ignit-
11925-2 ability of products subjected to
ISO/PRF Plastics — Polyetheretherketone direct impingement of flame — 2020-01-03
23153-2 (PEEK) moulding and extrusion Part 2: Single-flame source test
materials — Part 2: Preparation (Revision of ISO 11925-2:2010,
of test specimens and determi- ISO 11925-2:2010/Cor 1:2011)
nation of properties
ISO 29903-1 Comparison of toxic gas data
TC 69 Applications of statistical from different tests — Part 1:
methods Guidance and requirements
ISO/FDIS Control charts — Part 7: Multi- (Revision of ISO 29903:2012)
7870-7 variate control charts TC 94 Personal safety -- Personal
2019-12-27 protective equipment
ISO/FDIS Respiratory protective devices
ISO/FDIS Accuracy (trueness and preci- 16972 — Vocabulary and graphical
5725-4 sion) of measurement methods symbols 2020-01-22
and results — Part 4: Basic 2020-01-22
methods for the determination (Revision of ISO 16972:2010)
of the trueness of a standard
measurement method ISO/PRF TS Respiratory protective devices —
(Revision of ISO 5725-4:1994) 16976-7 Human factors — Part 7: Hearing
and speech
TC 70 Internal combustion (Revision of ISO/TS
engines 16976-7:2013)
ISO/FDIS Reciprocating internal combus- TC 106 Dentistry
6798-1 tion engines — Measurement of
ISO/FDIS Dentistry — Laboratory cutters
sound power level using sound 2019-12-30
7787-2 — Part 2: Carbide laboratory
pressure — Part 1: Engineering
cutters 2020-01-15
method
(Revision of ISO 6798:1995)
(Revision of ISO 7787-2:2000)
ISO/FDIS Reciprocating internal combus-
ISO/FDIS Dentistry — Spoons and bone
6798-2 tion engines — Measurement of
22570 curettes
sound power level using sound 2019-12-31
2020-01-09
pressure — Part 2: Survey
method
(Revision of ISO 6798:1995) TC 107 Metallic and other inorgan-
TC 76 Transfusion, infusion ic coatings
and injection, and blood ISO/FDIS Vitreous and porcelain enam-
processing equipment for 6370-2 els — Determination of the
medical and pharmaceuti- resistance to abrasion — Part 2: 2020-01-14
Loss in mass after sub-surface
cal use
abrasion
ISO 11040- Prefilled syringes — Part 4: (Revision of ISO 6370-2:2011)
4:2015/FDAmd Glass barrels for injectables and
1 sterilized subassembled syringes 2020-01-24 ISO/FDIS Vitreous and porcelain enamels
ready for filling — Amendment 1 8289-1 — Low-voltage test for detect-
ing and locating defects — Part 2020-01-10
TC 85 Nuclear energy, nuclear 1: Swab test for non-profiled
technologies, and radio- surfaces
logical protection (Revision of ISO 8289:2000)
TC 110 Industrial trucks

10 ISO Update, Supplement to ISO Focus -- December 2019

 ISO 3691- Industrial trucks — Safety ISO/PRF TS Earth-moving machinery and
5:2014/PRF requirements and verification 15143-3 mobile road construction
Amd 1 — Part 5: Pedestrian-propelled machinery — Worksite data
trucks — Amendment 1 exchange — Part 3: Telematics
data
TC 112 Vacuum technology
(Revision of ISO/TS
ISO/FDIS 2861 Vacuum technology — Dimen- 15143-3:2016)
sions of clamped-type quick-
release couplings 2020-01-09 TC 130 Graphic technology
ISO/PRF Graphic technology — Prepress
(Revision of ISO 2861:2013) 12641-2 digital data exchange — Part
2: Advanced colour targets for
ISO/FDIS 3669 Vacuum technology — Bakeable
input scanner calibration
flanges — Dimensions of knife-
(Revision of ISO 12641:1997)
edge flanges 2019-12-30
ISO/FDIS Graphic technology — Guide-
(Revision of ISO 3669:2017) 19301 lines for schema writers —
Template for colour quality 2020-01-20
TC 114 Horology
management
ISO/FDIS Timekeeping instruments —
ISO/PRF TS Image technology colour man-
18684 Watch external parts made of
23564 agement — Evaluating colour
hard material — General require- 2020-01-08
transform accuracy in ICC
ments and test methods
profiles
(Revision of ISO/TS 18684:2015)
ISO/FDIS 764 Horology — Magnetic resistant
TC 138 Plastics pipes, fittings and
watches valves for the transport of
2020-01-09 fluids
ISO Plastics pipes and fittings —
(Revision of ISO 764:2002) 21307:2017/ Butt fusion jointing procedures
TC 121 Anaesthetic and respiratory PRF Amd 1 for polyethylene (PE) piping
equipment systems — Amendment 1

ISO/PRF TS Non-invasive sphygmomanom- TC 145 Graphical symbols

81060-5 eters — Part 5: Requirement for ISO Graphical symbols — Safety
the repeatability and reproduc- 7010:2019/ colours and safety signs — Reg-
ibility of NIBP simulators for test- FDAmd 1 istered safety signs — Amend- 2019-12-25
ing of automated non-invasive ment 1
sphygmomanometers
TC 150 Implants for surgery
TC 122 Packaging
ISO Cardiovascular implants and
ISO/FDIS Transport packages for danger- 15674:2016/ artificial organs — Hard-shell
16106 ous goods — Dangerous goods FDAmd 1 cardiotomy/venous reservoir 2020-01-09
packagings, intermediate bulk 2020-01-07 systems (with/without filter) and
containers (IBCs) and large soft venous reservoir bags —
packagings — Guidelines for the Amendment 1: Connectors
application of ISO 9001
ISO Cardiovascular implants and
(Revision of ISO 16106:2006)
15675:2016/ artificial organs — Cardiopulmo-
TC 123 Plain bearings FDAmd 1 nary bypass systems — Arterial 2020-01-09
ISO/FDIS Plain bearings — Hydrodynamic blood line filters — Amendment
12130-2 plain tilting pad thrust bearings 1: Connectors
under steady-state conditions — 2020-01-15 ISO 14243- Implants for surgery — Wear
Part 2: Functions for calculation 1:2009/PRF of total knee-joint prostheses
of tilting pad thrust bearings Amd 1 — Part 1: Loading and displace-
(Revision of ISO 12130-2:2013) ment parameters for wear-test-
ing machines with load control
ISO/FDIS Plain bearings — Hydrodynamic
and corresponding environmen-
12130-3 plain tilting pad thrust bearings
tal conditions for test — Amend-
under steady-state conditions 2020-01-15
ment 1
— Part 3: Guide values for the
calculation of tilting pad thrust ISO 14243- Implants for surgery — Wear
bearings 3:2014/PRF of total knee-joint prostheses
(Revision of ISO 12130-3:2001) Amd 1 — Part 3: Loading and displace-
ment parameters for wear-
TC 126 Tobacco and tobacco
testing machines with displace-
products ment control and corresponding
ISO/PRF Tobacco and tobacco products environmental conditions for test
13276 — Determination of nicotine — Amendment 1
purity — Gravimetric method
TC 156 Corrosion of metals and
using tungstosilicic acid
(Revision of ISO 13276:2017)
alloys
ISO/FDIS Assessment of the effectiveness
TC 127 Earth-moving machinery
22426 of cathodic protection based on
ISO/FDIS 7096 Earth-moving machinery — coupon measurements 2020-01-10
Laboratory evaluation of opera-
tor seat vibration 2020-01-09
TC 172 Optics and photonics
(Revision of ISO 7096:2000) ISO/PRF Optics and photonics — Optical
9336-3 transfer function — Application
— Part 3: Telescopes

ISO Update, Supplement to ISO Focus -- December 2019 11

 (Revision of ISO 9336-3:1994)
ISO/PRF Fine ceramics (advanced ceram-
ISO/PRF Ophthalmic instruments — 23114 ics, advanced technical ceram-
15004-1 Fundamental requirements and ics) — Test method for determin-
test methods — Part 1: General ing bonding strength of ceramic
requirements applicable to all coatings
ophthalmic instruments ISO/FDIS Fine ceramics (advanced ceram-
(Revision of ISO 15004-1:2006) 23242 ics, advanced technical ceram-
TC 174 Jewellery and precious ics) — Test method for flexural 2019-12-31
metals strength of monolithic ceramic
thin plates at room temperature
ISO/PRF Jewellery and precious met- by three-point or four-point
15096 als — Determination of 999 0/00 bending
silver — Difference method using
ICP-OES TC 211 Geographic information/
(Revision of ISO 15096:2014) Geomatics
ISO/PRF Jewellery and precious metals ISO/FDIS Addressing — Part 3: Address
22764 — Fineness of solders used with 19160-3 data quality
precious metal jewellery alloys 2020-01-13
TC 182 Geotechnics
ISO/PRF Geographic information —
ISO 18674- Geotechnical investigation
19161-1 Geodetic references — Part 1:
3:2017/PRF and testing — Geotechnical
International terrestrial reference
Amd 1 monitoring by field instrumenta-
system (ITRS)
tion — Part 3: Measurement of
displacements across a line: TC 212 Clinical laboratory testing
Inclinometers — Amendment 1 and in vitro diagnostic test
TC 188 Small craft systems
ISO/FDIS Small craft — Ventilation of ISO/FDIS Medical laboratories — Require-
11105 petrol engine and/or petrol tank 15190 ments for safety
compartments 2020-01-13 2019-12-30

(Revision of ISO 11105:1997) (Revision of ISO 15190:2003)

ISO/FDIS Small craft — Hull construction ISO/FDIS In vitro diagnostic medical de-
12215-10 and scantlings — Part 10: Rig 17511 vices — Requirements for estab-
loads and rig attachment in sail- 2020-01-21 lishing metrological traceability 2020-01-03
ing craft of values assigned to calibrators,
trueness control materials and
TC 201 Surface chemical analysis human samples
ISO/PRF Surface chemical analysis — (Revision of ISO 17511:2003)
21222 Scanning probe microscopy — ISO/FDIS Medical laboratories — Applica-
Procedure for the determination 22367 tion of risk management to medi-
of elastic moduli for compliant cal laboratories 2020-01-06
materials using atomic force
microscope and the two-point (Revision of ISO/TS 22367:2008,
JKR method ISO/TS 22367:2008/Cor 1:2009)
TC 204 Intelligent transport TC 213 Dimensional and geometri-
systems cal product specifications
ISO/PRF Intelligent transport systems — and verification
14813-5 Reference model architecture(s) ISO/FDIS Geometrical product speci-
for the ITS sector — Part 5: 21204 fications (GPS) — Transition
Requirements for architecture specification 2020-01-15
description in ITS standards
(Revision of ISO 14813-5:2010)
TC 215 Health informatics
ISO/PRF TS Intelligent transport systems —
19082 Definition of data elements and ISO/IEEE FDIS Health informatics — Device
data frames between roadside 11073-10201 interoperability — Part 10201:
modules and signal controllers Point-of-care medical device 2020-04-01
for cooperative signal control communication — Domain infor-
mation model
ISO/PRF Intelligent transport systems —
(Revision of ISO/IEEE
19414 Service architecture of probe
11073-10201:2004)
vehicle systems
ISO/PRF TS Information model of Chinese
TC 206 Fine ceramics 21831 materia medica processing
ISO/PRF Fine ceramics (advanced ceram-
22551 ics, advanced technical ceram- ISO/PRF TS Health Informatics — Categorial
ics) — Determination of bacterial 23303 structure for Chinese materia
reduction rate by semiconduct- medica products manufacturing
ing photocatalytic materials process
under indoor lighting environ-
ment — Semi-dry method for TC 226 Materials for the produc-
estimating antibacterial activity tion of primary aluminium
on the actual environmental bac-
teria contamination surface

12 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/FDIS Carbonaceous products for ISO/FDIS Security and resilience — Com-
14420 the production of aluminium 22392 munity resilience — Guidelines
— Baked anodes and shaped 2020-01-20 for conducting peer reviews 2020-01-17
carbon products — Determina-
tion of the coefficient of linear
ISO/FDIS Security and resilience — Com-
thermal expansion
22396 munity resilience — Guidelines
(Revision of ISO 14420:2005) for information exchange be- 2020-01-10
TC 238 Solid biofuels tween organizations
ISO/FDIS Solid biofuels — Safe handling TMBG Technical Management
20024 and storage of solid biofuel pel- Board - groups
lets in commercial and industrial 2020-01-08
IWA 33-1 Technical guidelines for the de-
applications
velopment of small hydropower
ISO/FDIS Solid biofuels — Simplified plants — Part 1: Vocabulary
21945 sampling method for small scale
IWA 33-2 Technical guidelines for the de-
applications 2019-12-27
velopment of small hydropower
plants — Part 2: Site selection
TC 249 Traditional Chinese planning
medicine JTC 1 Information technology
ISO/FDIS Traditional Chinese medicine — ISO/IEC PRF Information technology — IT
22894 Pulse waveform format 19770-8 asset management — Part 8:
2020-01-21 Guidelines for mapping of indus-
try practices to/from the ISO/IEC
TC 261 Additive manufacturing 19770 family of standards
ISO/ASTM Specification for additive ISO/IEC PRF Systems and software engineer-
FDIS 52915 manufacturing file format (AMF) TR 29110-3-1 ing — Lifecycle profiles for Very
Version 1.2 2020-02-17 Small Entities (VSEs) — Part 3-1:
Process assessment guidelines
(Revision of ISO/ASTM (Revision of ISO/IEC TR
52915:2016) 29110-3-1:2015)
TC 264 Fireworks ISO/IEC PRF Information technology — Mul-
15938-6 timedia content description
ISO/FDIS Fireworks — Test methods interface — Part 6: Reference
22863-1 for determination of specific software
chemical substances — Part 1: 2020-01-07
(Revision of ISO/IEC 15938-
General
6:2003/Amd 1:2006/Cor 1:2007,
ISO/FDIS Fireworks — Test methods ISO/IEC 15938-6:2003, ISO/IEC
22863-2 for determination of specific 15938-6:2003/Amd 1:2006, ISO/
chemical substances — Part 2020-01-08 IEC 15938-6:2003/Amd 2:2007,
2: Hexachlorobenzene by gas ISO/IEC 15938-6:2003/Amd
chromatography 3:2010, ISO/IEC 15938-6:2003/
Amd 4:2011)
TC 268 Sustainable cities and
communities ISO/IEC FDIS Information technology — JPEG
21122-4 XS low-latency lightweight image
ISO/FDIS Smart community infrastructures coding system — Part 4: Con- 2020-01-20
37156 — Guidelines on data exchange formance testing
and sharing for smart community 2020-01-03
infrastructures ISO/IEC FDIS Information technology — MPEG
23003-3 audio technologies — Part 3:
ISO/FDIS Smart community infrastructures Unified speech and audio coding 2020-01-05
37161 — Guidance on smart trans-
portation for energy saving in 2020-01-17 (Revision of ISO/IEC 23003-
transportation services 3:2012, ISO/IEC 23003-3:2012/
ISO/FDIS Smart community infrastructures Cor 1:2012, ISO/IEC 23003-
37162 — Smart transportation for newly 3:2012/Amd 2:2015, ISO/IEC
developing areas 2020-01-15 23003-3:2012/Cor 2:2013, ISO/
IEC 23003-3:2012/Cor 3:2015,
ISO/IEC 23003-3:2012/Amd
TC 276 Biotechnology 3:2016, ISO/IEC 23003-3:2012/
ISO/FDIS Biotechnology — Nucleic acid Amd 1:2014, ISO/IEC 23003-
20688-1 synthesis — Part 1: Require- 3:2012/Amd 1:2014/Cor 1:2015,
ments for the production and 2020-01-07 ISO/IEC 23003-3:2012/Cor
quality control of synthesized 4:2015, ISO/IEC 23003-3:2012/
oligonucleotides Amd 2:2015/Cor 1:2015)
TC 279 Innovation management ISO/IEC PRF Information technology — MPEG
23003-5 audio technologies — Part 5:
ISO/FDIS Innovation management — Fun-
Uncompressed audio in MPEG-4
56000 damentals and vocabulary
file format
2020-01-09
ISO/IEC Information technology — Dy-
23009-5:2017/ namic adaptive streaming over
TC 292 Security and resilience FDAmd 1 HTTP (DASH) — Part 5: Server 2020-01-24
ISO/FDIS Security and resilience — Busi- and network assisted DASH
22313 ness continuity management (SAND) — Amendment 1: Im-
systems — Guidance on the use 2020-01-17 provements on SAND messages
of ISO 22301
(Revision of ISO 22313:2012)

ISO Update, Supplement to ISO Focus -- December 2019 13

 ISO/IEC FDIS Information technology — Inter- ISO en Ships and marine technology —
23093-1 net of media things — Part 1: 11674:2019 Heading control systems
Architecture 2020-01-20 F

ISO/IEC FDIS Information technology — JPEG TC 10 Technical product

29199-2 XR image coding system — Part documentation
2: Image coding specification 2020-01-16
ISO en Fluid draughting media — Part 2:
(Revision of ISO/IEC 29199- 9957-2:2019 Water-based non-India ink — Re-
2:2012, ISO/IEC 29199-2:2012/ quirements and test conditions B
Amd 1:2017)
ISO/IEC PRF Digital publishing — EPUB3 TC 17 Steel
TS 22424-1 preservation — Part 1: Principles ISO en Switch and crossing rails
22055:2019 fr
ISO/IEC PRF Digital publishing — EPUB3 D
TS 22424-2 preservation — Part 2: Metadata
requirements TC 20 Aircraft and space vehicles
ISO/IEC FDIS Information technology — User ISO en Unmanned aircraft systems — Part 3:
17549-2 interface guidelines on menu 21384-3:2019 Operational procedures
navigation — Part 2: Navigation 2020-01-07 C
with 4-direction devices
(Revision of ISO/IEC
17549-2:2015) TC 22 Road vehicles
ISO/IEC FDIS Information technology — ISO fr Road vehicles — Vehicle to grid
24779-5 Cross-jurisdictional and societal 15118-1:2019 communication interface — Part 1:
aspects of implementation of 2020-01-20 General information and use-case H
biometric technologies — Pic- definition
tograms, icons and symbols for ISO/TR en Road vehicles — Solutions for re-
use with biometric systems — 23786:2019 mote access to vehicle — Criteria for
Part 5: Face applications risk assessment B
ISO/IEC PRF Information technology — Cloud
22624 computing — Taxonomy based ISO en Road vehicles — Test methods and
data handling for cloud services 20076:2019 performance requirements for voltage
ISO/IEC PRF Information technology — Cloud class B connectors G
TS 23167 computing — Common tech-
nologies and techniques ISO en Road Vehicles — Aerosol separator
ISO/IEC PRF Information technology — Cloud 17536-4:2019 performance test for internal com-
TR 23188 computing — Edge computing bustion engines — Part 4: Laboratory D
landscape fractional efficiency test method

ISO/IEC FDIS Information technology — Gov- ISO 22241- en Diesel engines — NOx reduction
38506 ernance of IT — Application of 1:2019/Amd agent AUS 32 — Part 1: Quality
ISO/IEC 38500 to the govern- 2019-12-30 1:2019 requirements — Amendment 1 XZ
ance of IT enabled investments
ISO en Road vehicles — Ergonomics as-
21956:2019 pects of transport information and
control systems — Human machine B
interface specifications for keyless
ignition systems
TC 23 Tractors and machinery for
agriculture and forestry

Standards published
ISO en Agricultural engineering — Electrical
15003:2019 and electronic equipment — Test-
ing resistance to environmental D
conditions
New International Standards published between 01 November and TC 24 Particle characterization in-
01 December 2019 cluding sieving
ISO en Particulate materials — Sampling and
1
delayed publication of language version 14488:2007/ sample splitting for the determination
2
corrected version Amd 1:2019 of particulate properties — Amend- XZ
3
multilingual document ment 1
ISO en Determination of particle size distri-
21501-2:2019 bution — Single particle light interac-
Price tion methods — Part 2: Light scatter- D
group ing liquid-borne particle counter
ISO en Determination of particle size distri-
TC 6 Paper, board and pulps 21501-3:2019 bution — Single particle light interac-
tion methods — Part 3: Light extinc- C
ISO 536:2019 en Paper and board — Determination of
tion liquid-borne particle counter
grammage
B TC 28 Petroleum and related prod-
ucts, fuels and lubricants from
TC 8 Ships and marine technology natural or synthetic sources

14 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/PAS fr Petroleum products — Fuels (class ISO en Textiles — Quantitative chemical
23263:2019 F) — Considerations for fuel suppliers 1833-15:2019 fr analysis — Part 15: Mixtures of jute
and users regarding marine fuel qual- B with certain animal fibres (method by A
ity in view of the implementation of determining nitrogen content)
maximum 0,50 % sulfur in 2020
ISO en Textiles — Bursting properties of
ISO en Fatty acid methyl esters (FAME) — 13938-1:2019 fr fabrics — Part 1: Hydraulic method
20424:2019 fr Determination of sulfur content — for determination of bursting strength A
Inductively coupled plasma optical B and bursting distension
emission spectrometry (ICP-OES)
ISO en Textiles — Bursting properties of
method
13938-2:2019 fr fabrics — Part 2: Pneumatic method
TC 29 Small tools for determination of bursting strength A
and bursting distension
ISO en Tools for moulding — Components
12165:2019 fr of compression and injection moulds TC 39 Machine tools
and diecasting dies — List of equiva- E
ISO en Machine tools safety — Presses
lent terms and symbols
16092-4:2019 fr — Part 4: Safety requirements for
TC 30 Measurement of fluid flow in pneumatic presses E
closed conduits
ISO fr Measurement of fluid flow by means TC 43 Acoustics
5167-6:2019 of pressure differential devices insert- ISO en Acoustics — Reference zero for the
ed in circular cross-section conduits C 389-7:2019 fr calibration of audiometric equipment
running full — Part 6: Wedge meters — Part 7: Reference threshold of B
ISO fr Measurement of fluid flow in closed hearing under free-field and diffuse-
20456:2017 conduits — Guidance for the use field listening conditions
of electromagnetic flowmeters for E ISO en Acoustics — Characterization of
conductive liquids 20270:2019 sources of structure-borne sound
TC 31 Tyres, rims and valves and vibration — Indirect measure- F
ment of blocked forces
ISO 9413:2019 en Tyre valves — Dimensions and
designation ISO fr Underwater acoustics — Quantities
H 17208-2:2019 and procedures for description and
measurement of underwater sound C
from ships — Part 2: Determination
TC 34 Food products of source levels from deep water
ISO en Guidelines for the harvesting, measurements
21983:2019 transportation, separation of stigma, TC 44 Welding and allied processes
drying and storage of saffron before A
packing ISO/TR en Brazing — Grouping systems for
24471:2019 materials — American materials
ISO en Microbiology of the food chain — E
16140-6:2019 fr Method validation — Part 6: Protocol
for the validation of alternative (pro- D
prietary) methods for microbiological ISO fr Brazing for aerospace applications
confirmation and typing procedures 11745:2010 — Qualification test for brazers and
brazing operators — Brazing of me- C
ISO en Microbiology of the food chain — Es- tallic components
19036:2019 fr timation of measurement uncertainty
for quantitative determinations F ISO fr Welding for aerospace applications
16338:2017 — Resistance spot and seam welding
F
TC 35 Paints and varnishes
ISO en Paints and varnishes — Determina- TC 45 Rubber and rubber products
3233-1:2019 tion of percentage volume of non-
volatile matter — Part 1: Method us- C ISO en Rubber, vulcanized or thermoplas-
ing a coated test panel to determine 815-1:2019 fr tic — Determination of compression
non-volatile matter and to determine set — Part 1: At ambient or elevated C
dry-film density by the Archimedes' temperatures
principle ISO en Rubber, vulcanized or thermoplastic
ISO en Paints and varnishes — Determina- 815-2:2019 fr — Determination of compression set
6504-3:2019 fr tion of hiding power — Part 3: Deter- — Part 2: At low temperatures D
mination of hiding power of paints for D
masonry, concrete and interior use ISO en Rubber — Determination of metal
ISO en Paints and varnishes — Determina- 6101-1:2019 content by atomic absorption spec-
15091:2019 fr tion of electrical conductivity and trometry — Part 1: Determination of B
resistance B zinc content
ISO en Rubber — Determination of metal
TC 37 Language and terminology 6101-2:2019 content by atomic absorption spec-
trometry — Part 2: Determination of B
ISO en Management of terminology resourc- lead content
26162-1:2019 es — Terminology databases — Part
1: Design D ISO 2440:2019 en Flexible and rigid cellular polymeric
fr materials — Accelerated ageing tests
A
ISO en Management of terminology resourc-
26162-2:2019 es — Terminology databases — Part
2: Software B TC 58 Gas cylinders

TC 38 Textiles

ISO Update, Supplement to ISO Focus -- December 2019 15

 ISO en Gas cylinders — Valve protection ISO en Aggregates for concrete — Test
11117:2019 fr caps and guards — Design, con- 20290-3:2019 methods for mechanical and physical
struction and tests C properties — Part 3: Determination of B
aggregate crushing value (ACV)
ISO en Gas cylinders — Cylinder bundles ISO en Aggregates for concrete — Test
10961:2019 fr — Design, manufacture, testing and 20290-4:2019 methods for mechanical and physical
inspection D properties — Part 4: Determination of B
ten percent fines value (TFV)
TC 60 Gears TC 79 Light metals and their alloys
ISO en Calculation of load capacity of spur ISO 2106:2019 en Anodizing of aluminium and its al-
6336-1:2019 fr and helical gears — Part 1: Basic fr loys — Determination of mass per
principles, introduction and general H unit area (surface density) of anodic B
influence factors oxidation coatings — Gravimetric
method
ISO en Calculation of load capacity of spur
6336-2:2019 fr and helical gears — Part 2: Calcula- TC 84 Devices for administration
tion of surface durability (pitting) F of medicinal products and
catheters
ISO en Calculation of load capacity of spur ISO 10555- fr Intravascular catheters — Sterile
6336-3:2019 fr and helical gears — Part 3: Calcula- 6:2015/Amd and single-use catheters — Part 6:
tion of tooth bending strength G 1:2019 Subcutaneous implanted ports — XZ
Amendment 1
ISO en Calculation of load capacity of spur ISO en Sharps injury protection — Require-
6336-6:2019 fr and helical gears — Part 6: Calcula- 23907-2:2019 ments and test methods — Part 2:
tion of service life under variable load F Reusable sharps containers C

TC 61 Plastics TC 85 Nuclear energy, nuclear

ISO 180:2019 en Plastics — Determination of Izod technologies, and radiological
fr impact strength protection
C
ISO en Radiological protection — Monitoring
16638-2:2019 fr and internal dosimetry for specific
ISO en Plastics — Polyoxymethylene (POM) materials — Part 2: Ingestion of ura- E
29988-1:2019 fr moulding and extrusion materials — nium compounds
Part 1: Designation system and basis B
ISO en Measurement of radioactivity in the
for specifications
18589-1:2019 environment — Soil — Part 1: Gen-
TC 67 Materials, equipment and off- eral guidelines and definitions C
shore structures for petroleum,
petrochemical and natural gas TC 87 Cork
industries
ISO 2067:2019 fr Granulated cork, broken cork and
ISO fr Petroleum and natural gas industry crushed cork — Sampling for the
19345-1:2019 — Pipeline transportation systems determination of moisture content A
— Pipeline integrity management H
specification — Part 1: Full-life cycle
integrity management for onshore TC 94 Personal safety -- Personal
pipeline protective equipment
ISO fr Petroleum and natural gas industries ISO en Protective clothing for users of
35106:2017 — Arctic operations — Metocean, 11393-6:2018 fr hand-held chainsaws — Part 6:
ice, and seabed data H Performance requirements and test D
methods for upper body protectors

TC 69 Applications of statistical ISO en Wildland firefighting personal protec-

methods 16073-2:2019 tive equipment — Requirements and
test methods — Part 2: Compatibility A
ISO en Control charts — Part 1: General
7870-1:2019 fr guidelines
D ISO en Wildland firefighting personal protec-
16073-7:2019 tive equipment — Requirements and
test methods — Part 7: Face and eye D
TC 71 Concrete, reinforced concrete protection
and pre-stressed concrete ISO en Station uniform for firefighters
ISO en Testing of concrete — Part 3: Making 21942:2019
1920-3:2019 and curing test specimens B
D
TC 110 Industrial trucks
ISO en Testing of concrete — Part 14: Set-
ISO Industrial trucks — Vocabulary —
1920-14:2019 ting time of concrete mixtures by
5053-2:2019 Part 2: Fork arms and attachments
resistance to penetration A
A

ISO en Aggregates for concrete — Test

20290-2:2019 methods for mechanical and physical
TC 113 Hydrometry
properties — Part 2: Method for de- A ISO 8368:2019 en Hydrometric determinations — Flow
termination of resistance to fragmen- measurements in open channels
tation by Los Angeles Test (LA-Test) using structures — Guidelines for D
selection of structure

16 ISO Update, Supplement to ISO Focus -- December 2019

 TC 117 Fans ISO en Performance of buildings — Building
21105-1:2019 enclosure thermal performance verifi-
ISO en Fans — Efficiency classification for
cation and commissioning — Part 1: E
12759-4:2019 fr fans — Part 4: Driven fans at maxi-
General requirements
mum operating speed D
TC 164 Mechanical testing of metals
TC 118 Compressors and pneumatic ISO en Metallic materials — Tensile testing
tools, machines and equipment 6892-1:2019 fr — Part 1: Method of test at room
temperature G
ISO en Hand-held portable power tools —
28927-1:2019 fr Test methods for evaluation of vibra-
tion emission — Part 1: Angle and E TC 172 Optics and photonics
vertical grinders ISO en Optics and photonics — Preparation
TC 121 Anaesthetic and respiratory 10110-8:2019 fr of drawings for optical elements and
equipment systems — Part 8: Surface texture D

ISO en Medical supply units

11197:2019 fr ISO en Optics and photonics — Prepara-
F 10110-12:2019 fr tion of drawings for optical elements
and systems — Part 12: Aspheric D
surfaces
TC 122 Packaging
ISO/TR fr Ophthalmic optics — Review of the
ISO 4180:2019 en Packaging — Complete, filled trans- 21958:2019 test methods used to assess scratch
fr port packages — General rules for and abrasion resistance of spectacle D
the compilation of performance test D lenses
schedules
ISO en Optics and photonics — Lasers
TC 123 Plain bearings 11551:2019 fr and laser-related equipment — Test
ISO en Plain bearings — Hydrostatic plain method for absorptance of optical C
12168-1:2019 journal bearings without drain- laser components
age grooves under steady-state E TC 178 Lifts, escalators and moving
conditions — Part 1: Calculation of walks
oil-lubricated plain journal bearings
without drainage grooves ISO en Lifts for the transport of persons and
8100-30:2019 fr goods — Part 30: Class I, II, III and VI
ISO en Plain bearings — Hydrostatic plain lifts installation E
12168-2:2019 journal bearings without drainage
grooves under steady-state condi- C
tions — Part 2: Characteristic values TC 184 Automation systems and
for the calculation of oil-lubricated integration
plain journal bearings without drain- ISO en Automation systems and integration
age grooves 21919-1:2019 — Interfaces for automated machine
TC 127 Earth-moving machinery tending — Part 1: Overview and C
fundamental principles
ISO 5010:2019 en Earth-moving machinery — Wheeled
fr machines — Steering requirements ISO en Industrial automation systems and
C 10303-41:2019 integration — Product data rep-
resentation and exchange — Part B
41: Integrated generic resource:
TC 131 Fluid power systems Fundamentals of product description
ISO 4411:2019 en Hydraulic fluid power — Valves — and support
fr Determination of differential pressure/ ISO en Industrial automation systems and
flow rate characteristics B 10303-42:2019 integration — Product data represen-
tation and exchange — Part 42: Inte- B
ISO fr Pneumatic fluid power — Determi- grated generic resource: Geometric
6358-2:2019 nation of flow-rate characteristics and topological representation
of components using compress- F ISO en Industrial automation systems and
ible fluids — Part 2: Alternative test 10303-44:2019 integration — Product data repre-
methods sentation and exchange — Part 44: B
TC 147 Water quality Integrated generic resource: Product
structure configuration
ISO en Water quality — Technetium-99 —
22125-1:2019 fr Part 1: Test method using liquid ISO en Industrial automation systems and
scintillation counting D 10303-45:2019 integration — Product data repre-
sentation and exchange — Part 45: B
Integrated generic resource: Material
ISO en Water quality — Technetium-99 — and other engineering properties
22125-2:2019 fr Part 2: Test method using inductively
coupled plasma mass spectrometry D ISO en Industrial automation systems and
(ICP-MS) 10303-46:2019 integration — Product data repre-
sentation and exchange — Part 46: B
ISO en Water quality — Detection and enu- Integrated generic resource: Visual
17995:2019 meration of thermotolerant Campylo- presentation
bacter spp D
ISO en Industrial automation systems and
10303-47:2019 integration — Product data repre-
TC 163 Thermal performance and sentation and exchange — Part 47: B
energy use in the built Integrated generic resource: Shape
environment variation tolerances

ISO Update, Supplement to ISO Focus -- December 2019 17

 ISO en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and
10303-56:2019 integration — Product data repre- 1019:2019 integration — Product data represen-
sentation and exchange — Part 56: B tation and exchange — Part 1019: B
Integrated general resource: State Application module: Product view
definition
ISO en Industrial automation systems and
10303-61:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and
sentation and exchange — Part 61: B 1025:2019 integration — Product data rep-
Integrated generic resource: Systems resentation and exchange — Part B
engineering representation 1025: Application module: Alias
identification
ISO 10303- en Industrial automation systems and
101:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and
sentation and exchange — Part 101: B 1026:2019 integration — Product data rep-
Integrated application resource: resentation and exchange — Part B
Draughting 1026: Application module: Assembly
structure
ISO 10303- en Industrial automation systems and
105:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and
sentation and exchange — Part 105: B 1027:2019 integration — Product data represen-
Integrated application resource: tation and exchange — Part 1027: B
Kinematics Application module: Contextual
shape positioning
ISO 10303- en Industrial automation systems and
107:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and
sentation and exchange — Part 107: B 1030:2019 integration — Product data rep-
Integrated application resource: resentation and exchange — Part B
Finite element analysis definition 1030: Application module: Property
relationships assignment
ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and
410:2019 integration — Product data repre- 1032:2019 integration — Product data represen-
sentation and exchange — Part 410: B tation and exchange — Part 1032: B
Application module: AP210 electronic Application module: Shape property
assembly interconnect and packag- assignment
ing design
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1043:2019 integration — Product data represen-
442:2019 integration — Product data repre- tation and exchange — Part 1043: B
sentation and exchange — Part 442: B Application module: Work order
Application module: AP242 managed
ISO/TS 10303- en Industrial automation systems and
model based 3D engineering
1050:2019 integration — Product data rep-
ISO 10303- en Industrial automation systems and resentation and exchange — Part B
515:2019 integration — Product data repre- 1050: Application module: Dimension
sentation and exchange — Part 515: B tolerance
Application interpreted construct:
ISO/TS 10303- en Industrial automation systems and
Constructive solid geometry
1051:2019 integration — Product data rep-
ISO 10303- en Industrial automation systems and resentation and exchange — Part B
517:2019 integration — Product data repre- 1051: Application module: Geometric
sentation and exchange — Part 517: B tolerance
Application interpreted construct:
ISO/TS 10303- en Industrial automation systems and
Mechanical design geometric
1054:2019 integration — Product data represen-
presentation
tation and exchange — Part 1054: B
ISO/TS 10303- en Industrial automation systems and Application module: Value with unit
1001:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and
tation and exchange — Part 1001: B
1055:2019 integration — Product data represen-
Application module: Appearance
tation and exchange — Part 1055: B
assignment
Application module: Part definition
ISO/TS 10303- en Industrial automation systems and relationship
1003:2019 integration — Product data rep-
ISO/TS 10303- en Industrial automation systems and
resentation and exchange — Part B
1058:2019 integration — Product data represen-
1003: Application module: Curve
tation and exchange — Part 1058: B
appearance
Application module: Configuration
ISO/TS 10303- en Industrial automation systems and effectivity
1004:2019 integration — Product data rep-
ISO/TS 10303- en Industrial automation systems and
resentation and exchange — Part B
1091:2019 integration — Product data represen-
1004: Application module: Elemental
tation and exchange — Part 1091: B
geometric shape
Application module: Maths space
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and
1005:2019 integration — Product data rep-
1092:2019 integration — Product data represen-
resentation and exchange — Part B
tation and exchange — Part 1092: B
1005: Application module: Elemental
Application module: Maths value
topology
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and
1103:2019 integration — Product data represen-
1006:2019 integration — Product data represen-
tation and exchange — Part 1103: B
tation and exchange — Part 1006: B
Application module: Product class
Application module: Foundation
representation

18 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and
1104:2019 integration — Product data rep- 1251:2019 integration — Product data represen-
resentation and exchange — Part B tation and exchange — Part 1251: B
1104: Application module: Specified Application module: Interface
product
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1253:2019 integration — Product data represen-
1105:2019 integration — Product data represen- tation and exchange — Part 1253: B
tation and exchange — Part 1105: B Application module: Condition
Application module: Multi linguism
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1256:2019 integration — Product data represen-
1109:2019 integration — Product data rep- tation and exchange — Part 1256: B
resentation and exchange — Part B Application module: State observed
1109: Application module: Alternative
ISO/TS 10303- en Industrial automation systems and
solution
1259:2019 integration — Product data rep-
ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B
1110:2019 integration — Product data rep- 1259: Application module: Activity as
resentation and exchange — Part B realized
1110: Application module: Surface
ISO/TS 10303- en Industrial automation systems and
conditions
1290:2019 integration — Product data rep-
ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B
1111:2019 integration — Product data represen- 1290: Application module: Document
tation and exchange — Part 1111: B management
Application module: Classification
ISO/TS 10303- en Industrial automation systems and
with attributes
1311:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1311: B
1112:2019 integration — Product data represen- Application module: Associative
tation and exchange — Part 1112: B draughting elements
Application module: Specification
ISO/TS 10303- en Industrial automation systems and
control
1321:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1321: B
1114:2019 integration — Product data represen- Application module: Swept solid
tation and exchange — Part 1114: B
ISO/TS 10303- en Industrial automation systems and
Application module: Classification
1348:2019 integration — Product data represen-
assignment
tation and exchange — Part 1348: B
ISO/TS 10303- en Industrial automation systems and Application module: Requirement
1118:2019 integration — Product data rep- management
resentation and exchange — Part B
ISO/TS 10303- en Industrial automation systems and
1118: Application module: Measure
1349:2019 integration — Product data represen-
representation
tation and exchange — Part 1349: B
ISO/TS 10303- en Industrial automation systems and Application module: Incomplete data
1126:2019 integration — Product data rep- reference mechanism
resentation and exchange — Part B
ISO/TS 10303- en Industrial automation systems and
1126: Application module: Document
1374:2019 integration — Product data represen-
properties
tation and exchange — Part 1374: B
ISO/TS 10303- en Industrial automation systems and Application module: Analysis shape
1127:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and
tation and exchange — Part 1127: B
1379:2019 integration — Product data represen-
Application module: File identification
tation and exchange — Part 1379: B
ISO/TS 10303- en Industrial automation systems and Application module: Cfd specified
1128:2019 integration — Product data represen- general property
tation and exchange — Part 1128: B
ISO/TS 10303- en Industrial automation systems and
Application module: External item
1383:2019 integration — Product data represen-
identification assignment
tation and exchange — Part 1383: B
ISO/TS 10303- en Industrial automation systems and Application module: Finite elements
1131:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and
tation and exchange — Part 1131: B
1386:2019 integration — Product data represen-
Application module: Construction
tation and exchange — Part 1386: B
geometry
Application module: Mesh topology
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and
1147:2019 integration — Product data represen-
1397:2019 integration — Product data represen-
tation and exchange — Part 1147: B
tation and exchange — Part 1397: B
Application module: Manufacturing
Application module: Conditional
configuration effectivity
effectivity
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and
1231:2019 integration — Product data represen-
1402:2019 integration — Product data rep-
tation and exchange — Part 1231: B
resentation and exchange — Part B
Application module: Product data
1402: Application module: Same as
management
external item
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and
1241:2019 integration — Product data represen-
1469:2019 integration — Product data represen-
tation and exchange — Part 1241: B
tation and exchange — Part 1469: B
Application module: Information
Application module: Foundation state
rights
definition

ISO Update, Supplement to ISO Focus -- December 2019 19

 ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and
1473:2019 integration — Product data represen- 1733:2019 integration — Product data rep-
tation and exchange — Part 1473: B resentation and exchange — Part B
Application module: Description 1733: Application module: Planned
assignment characteristic
ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and
1523:2019 integration — Product data represen- 1739:2019 integration — Product data represen-
tation and exchange — Part 1523: B tation and exchange — Part 1739: B
Application module: Shape data Application module: Production rule
quality criteria
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1764:2019 integration — Product data represen-
1603:2019 integration — Product data represen- tation and exchange — Part 1764: B
tation and exchange — Part 1603: B Application module: Shape feature
Application module: Analytical model
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1765:2019 integration — Product data represen-
1628:2019 integration — Product data represen- tation and exchange — Part 1765: B
tation and exchange — Part 1628: B Application module: Characterizable
Application module: Design product object
data management
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1767:2019 integration — Product data represen-
1635:2019 integration — Product data rep- tation and exchange — Part 1767: B
resentation and exchange — Part B Application module: Composite
1635: Application module: Assembly constituent shape
functional interface requirement
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1770:2019 integration — Product data represen-
1641:2019 integration — Product data rep- tation and exchange — Part 1770: B
resentation and exchange — Part B Application module: Part and zone
1641: Application module: Assembly laminate tables
module with subassembly
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1782:2019 integration — Product data rep-
1646:2019 integration — Product data rep- resentation and exchange — Part B
resentation and exchange — Part B 1782: Application module: Qualified
1646: Application module: Footprint measure
definition
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1790:2019 integration — Product data represen-
1647:2019 integration — Product data represen- tation and exchange — Part 1790: B
tation and exchange — Part 1647: B Application module: Parameterization
Application module: Assembly physi- and variational representation
cal interface requirement
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1791:2019 integration — Product data represen-
1649:2019 integration — Product data rep- tation and exchange — Part 1791: B
resentation and exchange — Part B Application module: Primitive solids
1649: Application module: Assembly
ISO/TS 10303- en Industrial automation systems and
technology
1796:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1796: B
1652:2019 integration — Product data represen- Application module: Kinematic mo-
tation and exchange — Part 1652: B tion representation
Application module: Basic geometry
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1803:2019 integration — Product data represen-
1656:2019 integration — Product data represen- tation and exchange — Part 1803: B
tation and exchange — Part 1656: B Application module: Process plan
Application module: Component
ISO/TS 10303- en Industrial automation systems and
grouping
1804:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1804: B
1657:2019 integration — Product data represen- Application module: Product as
tation and exchange — Part 1657: B individual assembly and test
Application module: Component
ISO/TS 10303- en Industrial automation systems and
feature
1806:2019 integration — Product data represen-
ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1806: B
1722:2019 integration — Product data represen- Application module: Form feature in
tation and exchange — Part 1722: B panel
Application module: Part template
ISO/TS 10303- en Industrial automation systems and
ISO/TS 10303- en Industrial automation systems and 1807:2019 integration — Product data represen-
1731:2019 integration — Product data represen- tation and exchange — Part 1807: B
tation and exchange — Part 1731: B Application module: Part shape
Application module: Constructive
ISO/TS 10303- en Industrial automation systems and
solid geometry 2D
1814:2019 integration — Product data rep-
ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B
1732:2019 integration — Product data represen- 1814: Application module: Machining
tation and exchange — Part 1732: B features
Application module: Physical unit
usage view

20 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and
1815:2019 integration — Product data represen- 1844:2019 integration — Product data represen-
tation and exchange — Part 1815: B tation and exchange — Part 1844: B
Application module: Mating structure Application module: General design
connectivity
ISO/TS 10303- en Industrial automation systems and
1824:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and
resentation and exchange — Part B 1845:2019 integration — Product data represen-
1824: Application module: Change tation and exchange — Part 1845: B
management Application module: Wire and cable
design connectivity
ISO/TS 10303- en Industrial automation systems and
1827:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and
resentation and exchange — Part B 1846:2019 integration — Product data represen-
1827: Application module: Extruded tation and exchange — Part 1846: B
structure cross section Application module: Mechanical
design features and requirements
ISO/TS 10303- en Industrial automation systems and
1828:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and
tation and exchange — Part 1828: B 4442:2019 integration — Product data represen-
Application module: Wiring harness tation and exchange — Part 4442: B
assembly design Domain model: Managed model
based 3D engineering domain
ISO/TS 10303- en Industrial automation systems and
1830:2019 integration — Product data represen- TC 190 Soil quality
tation and exchange — Part 1830: B
ISO en Soil quality — Leaching proce-
Application module: Edge based
21268-4:2019 fr dures for subsequent chemical and
topological representation with length
ecotoxicological testing of soil and E
ISO/TS 10303- en Industrial automation systems and soil-like materials — Part 4: Influence
1831:2019 integration — Product data represen- of pH on leaching with initial acid/
tation and exchange — Part 1831: B base addition
Application module: Scan data 3D
shape
TC 194 Biological and clinical evalua-
tion of medical devices
ISO/TS 10303- en Industrial automation systems and
1834:2019 integration — Product data represen- ISO en Biological evaluation of medical
tation and exchange — Part 1834: B 10993-9:2019 fr devices — Part 9: Framework for
Application module: Surface visual identification and quantification of B
texture potential degradation products

ISO/TS 10303- en Industrial automation systems and ISO en Biological evaluation of medical
1835:2019 integration — Product data represen- 10993-15:2019 fr devices — Part 15: Identification and
tation and exchange — Part 1835: B quantification of degradation prod- C
Application module: Additive manu- ucts from metals and alloys
facturing part and build information TC 197 Hydrogen technologies
ISO/TS 10303- en Industrial automation systems and ISO en Hydrogen fuel quality — Product
1836:2019 integration — Product data represen- 14687:2019 specification
tation and exchange — Part 1836: B C
Application module: Vertex colours
for tessellated geometry
ISO en Gaseous hydrogen — Fuelling sta-
ISO/TS 10303- en Industrial automation systems and 19880-5:2019 tions — Part 5: Dispenser hoses and
1837:2019 integration — Product data represen- hose assemblies E
tation and exchange — Part 1837: B
Application module: Product data
equivalence definition TC 204 Intelligent transport systems
ISO/TS 10303- en Industrial automation systems and ISO en Electronic fee collection — Com-
1838:2019 integration — Product data represen- 12813:2019 fr pliance check communication for
tation and exchange — Part 1838: B autonomous systems F
Application module: Annotated 3D
model equivalence criteria TC 205 Building environment design
ISO/TS 10303- en Industrial automation systems and ISO en Planning for functional performance
1839:2019 integration — Product data represen- 19455-1:2019 testing for building commissioning
tation and exchange — Part 1839: B — Part 1: Secondary hydronic pump, C
Application module: Annotated 3D system and associated controls
model equivalence inspection result
ISO en Open data communication in building
ISO/TS 10303- en Industrial automation systems and 22510:2019 automation, controls and building
1840:2019 integration — Product data represen- management — Home and build- H
tation and exchange — Part 1840: B ing electronic systems — KNXnet/IP
Application module: Annotated 3D communication
model equivalence shape
TC 206 Fine ceramics
ISO/TS 10303- en Industrial automation systems and
1841:2019 integration — Product data represen- ISO en Fine ceramics (advanced ceramics,
tation and exchange — Part 1841: B 21822:2019 advanced technical ceramics) —
Application module: Annotated 3D Measurement of iso-electric point of B
model equivalence assembly ceramic powder
TC 207 Environmental management

ISO Update, Supplement to ISO Focus -- December 2019 21

 ISO en Environmental management systems ISO/TR fr Nanotechnologies — Health and
14002-1:2019 — Guidelines for using ISO 14001 to 12885:2018 safety practices in occupational
address environmental aspects and B settings H
conditions within an environmental
topic area — Part 1: General
TC 249 Traditional Chinese medicine
TC 212 Clinical laboratory testing and ISO/TR en Traditional Chinese medicine —
in vitro diagnostic test systems 23975:2019 Priority list of single herbal medicines
ISO/TS en Guidance for supervisors and opera- for developing standards G
22583:2019 tors of point-of-care testing (POCT)
devices E TC 268 Sustainable cities and
communities
ISO en Biorisk management for laboratories
ISO en Sustainable cities and communities
35001:2019 and other related organisations
37105:2019 — Descriptive framework for cities
D
and communities G

TC 215 Health informatics

TC 269 Railway applications
ISO fr Health informatics — Explicit time-
ISO en Railway applications — Calculation of
12381:2019 related expressions for healthcare-
20138-2:2019 fr braking performance (stopping, slow-
specific problems D
ing and stationary braking) — Part 2: E
General algorithms utilizing step by
ISO/TS en Health Informatics — Categorial step calculation
22773:2019 structures for the representation of
ISO en Railway applications — Recyclability
the decocting process in traditional A
21106:2019 fr and recoverability calculation method
Chinese medicine
for rolling stock C
TC 216 Footwear
ISO en Footwear — Critical substances TC 282 Water reuse
19577:2019 fr potentially present in footwear and
ISO en Industrial wastewater classification
footwear components — Determina- B
22447:2019
tion of Nitrosamines
D
TC 219 Floor coverings
ISO en Resilient floor coverings — Homo- TC 295 Audit data services
10581:2019 fr geneous poly(vinyl chloride) floor
ISO en Audit data collection
covering — Specifications B
21378:2019
H
ISO en Laminate floor coverings — Determi-
24337:2019 fr nation of geometrical characteristics
B
TC 301 Energy management and en-
ergy savings
TC 220 Cryogenic vessels ISO/TS en Energy saving projects (EnSPs) —
50044:2019 Guidelines for economic and financial
ISO en Cryogenic vessels — Cryogenic evaluation F
21014:2019 insulation performance
C
TMBG Technical Management Board
- groups
TC 221 Geosynthetics
ISO Guide en Guidelines for addressing sustainabil-
ISO en Geosynthetics — Index test proce- 82:2019 ity in standards
10722:2019 dure for the evaluation of mechanical D
damage under repeated loading — B
Damage caused by granular material
(laboratory test method) CASCO Committee on conformity
assessment
ISO en Geotextiles and geotextile-related
13426-1:2019 products — Strength of inter- ISO/IEC TR fr Conformity assessment — Guidelines
nal structural junctions — Part 1: B 17032:2019 and examples of a scheme for the
Geocells certification of processes E
TC 224 Service activities relating to
drinking water supply, waste- JTC 1 Information technology
water and stormwater systems ISO/IEC en Information technology — Power
ISO fr Service activities relating to drink- 24091:2019 efficiency measurement specification
24536:2019 ing water supply, wastewater and for data center storage G
stormwater systems — Stormwater G
management — Guidelines for storm- ISO/IEC en Software and systems engineering
water management in urban areas 26561:2019 — Methods and tools for product line
TC 226 Materials for the production of technical probe F
primary aluminium
ISO/IEC en Software and systems engineering
ISO en Carbonaceous materials for the
26562:2019 — Methods and tools for product line
14428:2019 production of aluminium — Cold and
transition management E
tepid ramming pastes — Expansion/ B
shrinkage during baking
TC 229 Nanotechnologies

22 ISO Update, Supplement to ISO Focus -- December 2019

 ISO/IEC en Information technology — Process TC 18 Zinc and zinc alloys
33020:2019 assessment — Process measurement
ISO 714:1975 (reconfirmed)
framework for assessment of process F
capability ISO 1169:2006 (reconfirmed)
ISO/IEC en Personal identification — ISO-com- ISO 3750:2006 (reconfirmed)
18013-4:2019 pliant driving licence — Part 4: Test ISO 3815-1:2005 (reconfirmed)
methods H
ISO 3815-2:2005 (reconfirmed)
ISO/IEC en Information technology — Computer ISO 20081:2005 (reconfirmed)
19774-1:2019 graphics, image processing and envi- TC 20 Aircraft and space vehicles
ronmental data representation — Part F
1: Humanoid animation (H-Anim) ISO 11:1987 (reconfirmed)
architecture ISO 2964:1985 (reconfirmed)
ISO/IEC en Information technology — Computer ISO 5859:2014
19774-2:2019 graphics, image processing and
environmental data representation — E ISO 6771:2007 (reconfirmed)
Part 2: Humanoid animation (H-Anim) ISO 7314:2002 (reconfirmed)
motion data animation
ISO 16031-2:2003 (reconfirmed)
ISO/IEC en Information technology — Electronic
TC 22 Road vehicles
27050-1:2019 discovery — Part 1: Overview and
concepts D ISO 7876-5:2004 (reconfirmed)
TC 23 Tractors and machinery for agriculture
ISO/IEC en Information security — Lightweight and forestry
29192-2:2019 cryptography — Part 2: Block ciphers
ISO 9261:2004 (reconfirmed)
G
TC 28 Petroleum and related products, fuels
ISO/IEC en Information technology — Internet of and lubricants from natural or synthetic
23093-3:2019 media things — Part 3: Media data sources
formats and APIs H ISO 7278-1:1987 (reconfirmed)
ISO 9029:1990 (reconfirmed)
ISO/IEC TS en Information technology — Metadata
11179-30:2019 registries (MDR) — Part 30: Basic ISO 9030:1990 (reconfirmed)
attributes of metadata B ISO 9200:1993 (reconfirmed)
ISO 10336:1997 (reconfirmed)
ISO/IEC en Information technology — User in-
30113-12:2019 terfaces — Gesture-based interfaces ISO 10337:1997 (reconfirmed)
across devices and methods — Part G ISO 11223:2004 (reconfirmed)
12: Multi-point gestures for common
system actions
TC 31 Tyres, rims and valves
ISO 10499-2:1998 (reconfirmed)
ISO/IEC TR en Information technology — IT
30105-7:2019 Enabled Services-Business Process TC 34 Food products
Outsourcing (ITES-BPO) lifecycle D
ISO 5550:2006 (reconfirmed)
processes — Part 7: Exemplar for
maturity assessment ISO 14377:2002 (reconfirmed)
ISO 14637:2004 (reconfirmed)
ISO 14673-1:2004 (reconfirmed)
ISO 14673-2:2004 (reconfirmed)
ISO 14673-3:2004 (reconfirmed)
ISO 14891:2002 (reconfirmed)
ISO 14892:2002 (reconfirmed)

Standards confirmed ISO 15323:2002 (reconfirmed)

ISO 15884:2002 (reconfirmed)
ISO/TS (reconfirmed)
The following International Standards are confimred for a five year 17193:2011
period: ISO/TS (reconfirmed)
6579-2:2012
COPOLCO Committee on consumer policy ISO/TS
13136:2012
ISO/IEC Guide
51:2014 TC 44 Welding and allied processes
TC 6 Paper, board and pulps ISO 9455-2:1993 (reconfirmed)
ISO 217:2013 TC 45 Rubber and rubber products
ISO 5269-1:2005 (reconfirmed) ISO 18064:2014
ISO 5269-2:2004 (reconfirmed) ISO 1307:2006 (reconfirmed)
TC 17 Steel TC 58 Gas cylinders
ISO 1035-4:1982 (reconfirmed) ISO 3500:2005 (reconfirmed)
ISO 7778:2014 ISO 20703:2006 (reconfirmed)
ISO 20723:2004 (reconfirmed) TC 59 Buildings and civil engineering works

ISO Update, Supplement to ISO Focus -- December 2019 23

 ISO 10591:2005 (reconfirmed) ISO/IEC
27033-4:2014
ISO 11432:2005 (reconfirmed)
ISO/IEC
TC 67 Materials, equipment and offshore
27036-1:2014
structures for petroleum, petrochemi-
cal and natural gas industries ISO/IEC
27038:2014
ISO 10426-5:2004 (reconfirmed)
ISO 10427-2:2004 (reconfirmed)
ISO 13503-6:2014
TC 86 Refrigeration and air-conditioning
ISO 16358-2:2013
ISO 16358-3:2013
TC 91 Surface active agents
Standards withdrawn
ISO 17293-1:2014
ISO 17293-2:2014 Period from 01 November to 01 December 2019
TC 92 Fire safety
ISO 834-10:2014 TC 26 Copper and copper alloys
TC 112 Vacuum technology ISO 431:1981 (replaced by )
ISO 3529-3:2014 TC 31 Tyres, rims and valves
TC 138 Plastics pipes, fittings and valves for ISO 3324-1:2013 (replaced by )
the transport of fluids ISO 3324-2:2013 (replaced by )
ISO 9393-2:2005 (reconfirmed) TC 34 Food products
TC 147 Water quality ISO/TS (replaced by ISO 19036:2019)
ISO 13165-2:2014 19036:2006

TC 150 Implants for surgery ISO/TS (replaced by ISO 19036:2019)

19036:2006/Amd
ISO 5833:2002 (reconfirmed) 1:2009
ISO 9583:1993 (reconfirmed) TC 37 Language and terminology
ISO 15309:2013 ISO 26162:2012 (replaced by ISO 26162-1:2019, ISO
ISO 16402:2008 (reconfirmed) 26162-2:2019)
ISO 16428:2005 (reconfirmed) TC 71 Concrete, reinforced concrete and pre-
TC 168 Prosthetics and orthotics stressed concrete
ISO/TS ISO 6274:1982 (replaced by ISO 20290-2:2019, ISO
16955:2016 20290-3:2019)
ISO 6782:1982 (replaced by ISO 20290-2:2019, ISO
TC 172 Optics and photonics
20290-3:2019)
ISO 23584-1:2009 (reconfirmed)
ISO 6783:1982 (replaced by ISO 20290-2:2019, ISO
ISO 9022-4:2014 20290-3:2019)
ISO 9358:1994 (reconfirmed) ISO 7033:1987 (replaced by ISO 20290-3:2019, ISO
ISO 17411:2014 20290-2:2019)

ISO 10935:2009 (reconfirmed) TC 92 Fire safety

ISO 7998:2005 (reconfirmed) ISO 12468-2:2013 (replaced by )

TC 173 Assistive products TC 117 Fans

ISO 10542-1:2012 (reconfirmed) ISO 12759:2010 (replaced by ISO 12759-2:2019, ISO 12759-
3:2019, ISO 12759-4:2019)
TC 180 Solar energy
ISO 12759:2010/ (replaced by ISO 12759-2:2019, ISO 12759-
ISO/TR 9901:1990 (reconfirmed) Amd 1:2013 3:2019, ISO 12759-4:2019)
TC 215 Health informatics TC 178 Lifts, escalators and moving walks
ISO/IEEE ISO 4190-1:2010 (replaced by ISO 8100-30:2019)
11073-10102:2014
TC 184 Automation systems and integration
ISO/IEEE
11073-10103:2014 ISO/TS (replaced by )
10303-1288:2014
ISO 20301:2014
ISO/TS (replaced by )
TC 218 Timber 10303-1362:2018
ISO 1030:1975 (reconfirmed) TC 190 Soil quality
JTC 1 Information technology ISO/TS (replaced by ISO 21268-4:2019)
ISO/IEC (reconfirmed) 21268-4:2007
14888-1:2008 TC 197 Hydrogen technologies
ISO/IEC (reconfirmed) ISO 14687-1:1999 (replaced by ISO 14687:2019)
14888-2:2008
ISO 14687-2:2012 (replaced by ISO 14687:2019)

24 ISO Update, Supplement to ISO Focus -- December 2019

 ISO 14687-3:2014 (replaced by ISO 14687:2019)
JTC 1 Information technology
ISO/IEC (replaced by ISO/IEC 19774-1:2019, ISO/IEC
19774:2006 19774-2:2019)

Meeting calendar
The meeting calendar is available at
https://www.iso.org/meeting-calendar.html

ISO Update, Supplement to ISO Focus -- December 2019 25