6CTA8 3-Gcatalog
6CTA8 3-Gcatalog
3-G2
0.0
1800 RPM Engine Output
0 25 50 75 100 125 150 175 200 Standby Power Rating 207 kWm* [277 BHP]
Gross Engine Power Output - kWm Prime Power Rating 188 kWm* [252 BHP]
(U.S. Gal = Litres x 0.2642) Continuous Power Rating 159 kWm* [213 BHP]
* Refers to gross power available from engine, not generator set.
U.S. Gallons/hour
14.0
13.0
12.0
1800 RPM General Engine Data:
11.0
10.0 (FR-90242) Bore and Stroke 114x135 mm [4.49x5.32 in.]
9.0 Displacement 8.3 L [505 cu. in.]
8.0
7.0
Lube System Oil Capacity 23.8 L [6.3 U.S. gal.]
6.0 Coolant Capacity 12.3 L [3.25 U.S. gal.]
5.0 Net Dry Weight with
4.0
3.0 Standard Accessories 702 kg [1,545 lb.]
2.0
1.0 Approx. Overall Dimensions:
0.0
0 25 50 75 100 125 150 175 200 225 250 275 300 Width 710 mm [27.96 in.]
Gross Engine Power Output - BHP Length 1182 mm [46.54 in.]
(Litres = U.S. Gal x 3.785) Height 1137 mm [44.78 in.]
PERFORMANCE:
RATING GUIDELINES:
Standard Conditions: Based on ISO8528 and defined in Cummins Power Rating Application
Data Shown Above Are Based On: Guidelines. Ref: AEB 26.02.
• Engine operating with fuel system, water pump, lubricating oil pump, air
cleaner and exhaust silencer; not included are battery charging alternator, fan OPERATION at ELEVATED TEMPERATURE and ALTITUDE:
and optional driven components.
The engine may be operated at:
• Engine operating with diesel fuel corresponding to grade No. 2D per
• 1800 RPM up to:
ASTM D975.
5000 ft. (1525 m) and 104 °F [40 °C] without power deration.
• ISO-3046, Part 1, Standard Reference Conditions of: 29.53 in. Hg. [100 kPa]
• 1500 RPM up to:
barometric pressure (361 ft. [110 m] altitude), 77 °F [25 °C] air temperature
5000 ft. (1525 m) and 104 °F [40 °C] without power deration.
and a relative humidity of 30%.
NOTES:
• Cummins Engine Company recommends that Cummins engines be operated For sustained operation above these conditions derate by:
at a minimum load of 30% of their respective Standby Power rating. 4% per 1,000 ft. [300 m] and 1% per 10 °F [2% per 11 °C].
6CTA8.3-G2
Design Features: Emissions Certification:
Aftercooler
EPA/CARB: Complies with Mobile Off-Highway standard per
Cooler, denser intake air from jacket water aftercooler increases ISO 8178 D2 at 1800 RPM rating.
combustion efficiency, reducing emissions and internal stresses.
Cylinder Head TALuft: Complies with 4 gram NOx standard at 1500 RPM
Prime Power rating.
One-piece crossflow cylinder head for maximum structural stiffness of
block/head assembly. Low swirl intake passages optimize combustion
for reduced emissions. Fitted with premium valves for enhanced See Exhaust Emissions Data Sheets for further details.
durability. Contains replaceable valve guides and seats.
Cylinder Liners
Replaceable wet liners are plateau-honed and feature mid-stop
clamping method, eliminating need for packing rings and crevice seals.
Filters
Fleetguard spin-on fuel filter, corrosion resistor, and combination
full flow/bypass lube oil filter. Optional Equipment:
Fuel System
In-line type Bosch P-Series pump operates at high injection pressures Please contact your local Cummins representative for additional
for cleaner combustion and lower emissions. Injection pump lubricated information regarding engine options.
by pressurized engine oil. Lift pump revised for higher flow rates to
ensure cooling and longevity of injection pump.
Pistons
Dual Ni-Resist piston with three-ring design and full-floating piston pin
minimizes oil consumption and improves durability through reduced Cummins has always been a pioneer in product improvement.
Thus, specifications may change without notice.
wear.
Illustrations may include optional equipment.
Turbocharger
Holset HX40W delivers altitude compensation as well as lower smoke Cummins Engine Company, Inc.
and noise levels; includes wastegate feature for instant transient Box 3005
response. Columbus, IN 47202-3005
U.S.A.