0% found this document useful (0 votes)
421 views3 pages

Alcatel DSLAM Configuration Guide

The document contains various commands for configuring and checking the status of DSLAM equipment. Some of the commands listed check system configurations, port status, MAC addresses, PPPoE sessions, interfaces, IP addresses, software versions, installed cards, spectrum profiles and line speeds. Other commands reboot equipment, save configurations, unlock and lock ports, and change a line from ATM to PTM mode.

Uploaded by

Paulo Peçanha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
421 views3 pages

Alcatel DSLAM Configuration Guide

The document contains various commands for configuring and checking the status of DSLAM equipment. Some of the commands listed check system configurations, port status, MAC addresses, PPPoE sessions, interfaces, IP addresses, software versions, installed cards, spectrum profiles and line speeds. Other commands reboot equipment, save configurations, unlock and lock ports, and change a line from ATM to PTM mode.

Uploaded by

Paulo Peçanha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd

Vizualizar as configura�oes do Dslam

info configure system

Vizualizar as Portas:
show xdsl operational-data line | match exact:1/1/4

Resetar a placa do slot no Alcatel:


admin equipment slot lt:1/1/6 reboot with-selftest

Verificar MAC ADDRESS:


show vlan bridge-port-fdb 1/1/2/4:0:33
show vlan fdb
show vlan fdb-board lt:1/1/4
show vlan fdb | match exact:1/1/8

Bras se��o no 10K:


show pppoe session interface gigabitEthernet 1/0/3.1402

Teste de ping:
ping es-asi01-edslam -s 8000 -c 100

Consultar as interfaces:
show interface shub port

Consultar IP do equipamento:
info configure system management detail

Reset Dslam:
admin equipment reboot-isam?

Consultar atenua��o:
show equipment diagnostics sfp detail

Desbloquear porta
configure xdsl line 1/1/8/44 admin-up

Para bloquear
configure xdsl line 1/1/3/48 no admin-up

Consultar os configura��o do Dslam


info configure system

Verificar vers�o da Nant-a:


show software-mngt oswp detail

Consultar as placas instaladas:


show equipment slot detail | match exact:1

Planejar placas no Dslam


configure equipment slot lt:1/1/11 planned-type nalt-j

Consulta de spectrum e profile:


show xdsl config-data-port 1/2/1/26

Configurar spectrum e profile:


configure xdsl line 1/1/4/45 spectrum-profile 100 service-profile 17 admin-up

Consultar a velocidade:
show interface shub port 1 detail

Alterar velocidade de Up link do Dslam:


configure interface shub port 1 port-type network mode 1gbps:full
configure interface shub port 1 port-type network mode automatic

Salvar configura��o
admin software-mngt shub database save

========================================================================
CONSULTANDO A VLAN DE SERVI�O E O PVID VDSL - P/(adsl-1/1/11/48:0:33)
======================================================================
alcatel> info configure bridge port 1/1/11/48
configure bridge
#-------------------------------------------------------------------------------
echo "bridge"
#-------------------------------------------------------------------------------
port 1/1/11/48
max-unicast-mac 2
vlan-id 584
network-vlan stacked:1254:584
vlan-scope local
exit
pvid 584
exit
#-------------------------------------------------------------------------------

=========================================================================
Apenas usei o comando abaixo para alterar do modo atm(XDSL) para ptm(VDSL).
============================================================================
alcatel> configure xdsl line 1/1/11/48 service-profile 21 spectrum-profile 7 dpbo-
profile 1 admin-up transfer-mode ptm

=======================================
COMANDOS PARA CRIAR CROSS VDSL - P/(ADSL:1/1/11:0:33)
=======================================
suporte> configure bridge port 1/1/11/48 max-unicast-mac 2
suporte> configure bridge port 1/1/11/48 vlan-id 584 network-vlan stacked:1254:584
vlan-scope local
suporte> configure bridge port 1/1/11/48 pvid 584

10.121.147.199 (aws serve).

=================================
COMANDOS PARA ATIVAR PORTA xDSL
=================================

configure atm pvc 1/1/11/19:0:33


configure atm pvc 1/1/11/19:0:42

configure xdsl line 1/1/11/19 service-profile 2 spectrum-profile 1 admin-up


transfer-mode atm

configure bridge port 1/1/11/19:0:33 max-unicast-mac 2


configure bridge port 1/1/11/19:0:33 vlan-id 555 network-vlan stacked:2106:555
vlan-scope local
configure bridge port 1/1/11/19:0:33 pvid 555

configure bridge port 1/1/11/19:0:42 max-unicast-mac 2


configure bridge port 1/1/11/19:0:42 vlan-id 555 network-vlan stacked:2621:555
vlan-scope local
configure bridge port 1/1/11/19:0:42 pvid 555

You might also like