Scribd
Upload
542 views2 pages

FORM PDI Wheel Loader

This document provides a pre-delivery inspection checklist for a wheel loader. It includes 66 items to inspect before and after starting the engine, ranging from engine components, hydraulic systems, electrical systems, and controls. It also documents the machine's specifications, including any reinforcements, attachments, and tire sizes. Inspection results are noted as OK or NA. The bottom specifies the machine owner and dealer, and includes signatures to verify inspection completion.

Uploaded by

Akbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
542 views2 pages

FORM PDI Wheel Loader

This document provides a pre-delivery inspection checklist for a wheel loader. It includes 66 items to inspect before and after starting the engine, ranging from engine components, hydraulic systems, electrical systems, and controls. It also documents the machine's specifications, including any reinforcements, attachments, and tire sizes. Inspection results are noted as OK or NA. The bottom specifies the machine owner and dealer, and includes signatures to verify inspection completion.

Uploaded by

Akbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PT.

KASANA TEKNINDO GEMILANG

Pre Delivery Inspection ( I ) WHEEL LOADER


Reference No.

Inspection Date Engine Model


Machine Model Engine SN
Machine Serial No Hour Meter Reading
Chasis Serial No

Inspection before engine start


NO Components Inspected Remark NO Components Inspected Remark
1 Engine condition 34 All sensor on the Transmition
2 Turbocharger 35 Articulated
3 Alternator 36 Hoses line
4 Starter motor 37 Pin and bushing
5 Pressure switch on the engine 38 Transmition oil level
6 Fan belt 39 Counterweight
7 Air condition ( motor ) 40 Hoses line
8 Engine harness ( wire ) 41 Reduction gear
9 Muffler ( Exhaust gas ) 42 Wheel F-R
10 Engine Mounting 43 Brake system
11 Radiator & coolant level 44 Differential oil level
12 Fuel hoses ( in & out ) 45 Cabin ( pinting, scratched / damage )
13 Air Filter 46 Upper frame ( painting / scratched / damage )
14 Air Intake to Engine 47 Lower frame ( rusty / painting / damage )
15 Engine oil level 48 Boom
16 Engine oil filter 49 Bucket
17 Main fuel filters ( additional filter ) 50 Attachment
18 Pre filter ( Water separator ) 51 Greasing
19 Hydraulic Pump 52 Hydraulic cooler
20 Pilot Pump 53 Intercooler
21 Regulators 54 Fuel cooler
22 Proportional valve 55 Battery
23 Pressure switches at hydraulic pump 56 AC – blower
24 Harness ( wire ) hydraulic pump 57 Accessories ( tools ) …….....................… items
25 Hoses line at hydraulic pump 58 Parts Manual …...................................... pieces
26 Hydraulic oil tank level 59 Operator manual ……............................ pieces
27 Servo valve & solenoids 60 Starter Key ……...................................... pieces
28 Control valve & others 61 Promotion & safety label
29 Harness ( wire ) at control valve 62 Lock ( door, cover & engine hood ) function
30 Control valve mounting 63 Working light …...................................... pieces
31 Hoses line 64 Mirror ……............................................... pieces
32 Pressure switches at control valve 65 Interior Light
33 Control panel 66 Safety belt ( function test )
PT. KASANA TEKNINDO GEMILANG

Pre Delivery Inspection ( II )

Inspection After Engine Start

No Components Inspected Remark No Components Inspected Remark


1 Parking brake 16 Wiper Washer
2 Travel control ( shift R-F, 1-2 ) 17 Horn switch
3 Wiper 18 Working light
4 Auto 19 Washer
5 Cigar lighter 20 Emergency stop
6 Air Condition 21 Radio
7 Front mirror sliding open/close 22 Monitor / panel control
8 Brake system 23 Joystick ppc hydraulic
9 AC sensor 24 Operator seat ( Adjustment )
10 Horn 25 Switch Battery
11 Idle ( manual ) 26 Pre Delivery Inspection label install
12 Idle …………............................................. Rpm 27 Rotary lamp
13 Maximum ………................................... Rpm 28 Fuel in tank …...................................................................……%
14 Bucket movement ( lift, tilt )
15 Cabin light

Fill in remarks : OK = baik, NA (Not Available) = Tidak ada.

Machine Specification
Fill in the boxes are √ = installed and X = not installed
Reinforcement Attachment Size
1. Boom 1. Bucket ……......mᵌ 5. Fork 1. Front Tire……….......

2. Bucket 2. Fix Grapple 2.Rear Tire ..............

3. Rotary Grapple

4. Breaker

Machine specification is : PT. Kasana Teknindo Gemilang Inspected by :


Mechanic
1. Standard Address :
Sign :
2. Modification Branch :

Phone No :
Name :

You might also like