0% found this document useful (0 votes)
199 views4 pages

Personal Care: Salcare Super 7 Salcare Super 7 AT1

Cosmetica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
199 views4 pages

Personal Care: Salcare Super 7 Salcare Super 7 AT1

Cosmetica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Technical Information

January 2013  Supersedes issue dated March 2012  WF-No. 121831  04_100130e-02/Page 1 of 4

Salcare® Super 7
Salcare® Super 7 AT1

Conditioning Polymer

® = Registered trademark of BASF Personal Care


04_100130e-02 January 2013 Page 2 of 4 Salcare® Super 7/ Salcare® Super 7 AT1

Characterization Salcare® Super 7, Salcare® Super 7 AT1, are a highly concentrated cationic aqueous
solution of a diallyl dimethyl ammonium chloride and acrylamide copolymer.

INCI name Polyquaternium-7

PRD-No. 30503299 Salcare® Super 7


30526472 Salcare® Super 7 AT1

Typical Salcare® Super 7, Salcare® Super 7 AT1, are designed for use in a range of
applications in the cosmetics industry.

Salcare® Super 7:
Contains for microbiologicalstabilisation preservatives:
0.4% Phenoxyethanol (and) Methylparabene (and) Ethylparabene (and) Propyl­
parabene (and) Butylparabene (and) Isobutylparabene

Salcare® Super 7 AT1:


It is parabene-free and contains the preservative system: 0.8 % Euxyl PE 9010
(90% phenoxyethanol + 10% ethylhexylglycerine)

Applications It is a highly substantive aqueous cationic polymer for use in skin and hair care
formulations.

Performance Efficient conditioning at low concentrations; more cost effective than existing low
solids Polyquaternium-7.

Highlights Readily soluble in water to give clear products.


Compatible with anionic, amphoteric, cationic and nonionic surfactants.
Imparts slip and lubricity to formulations.

Prime Functions Conditioning


Detangling
Softening
Promotes good spreading
Improves foam density and stability

General Properties Nature Aqueous solution of cationic copolymer


Appearance Flowable liquid
Color Colorless
Odor Mild aldehydic
% Solids 40
Viscosity as Supplied 4000 cPs
(25 °C) (RVT/4/10)
pH as supplied (25 °C) 4 – 5
Boiling Point 100 °C
Freeze/Thaw Stability Stable
Density @ 25 °C 1.12 g/cm

Formulating Salcare® Super 7, Salcare® Super 7 AT1, can be used with all types of
surfactants.

Typical Salcare® Super 7, Salcare® Super 7 AT1, will enhance the performance
characteristics of hair and skin applications.
04_100130e-02 January 2013 Page 3 of 4 Salcare® Super 7/ Salcare® Super 7 AT1

Typical Applications Salcare® Super 7, Salcare® Super 7 AT1, will enhance the performance of hair
care

Application Area Approx. Use Level End Results/Performance


(% Active)
Shampoo 1.0 Foam stabilization, antistatic,
detangling
Hair Conditioner 1.2 Antistatic, detangling, body,
softening
Hand & Body Lotion 0.7 Softening, enhanced
spreading, properties
Liquid Setting Lotion 1.2 Holding characteristics, body,
manageability
Styling Gels & Mousses 0.7 – 1.2 Enhanced styling, conditioning
Shower gels 1.2 Foam stabilization,
skin conditioning

Salcare® Super 7, Salcare® Super 7 AT1, also can be used in foam baths, suntan
lotion, lip preparations, etc.

Assistance can also be offered to solve individual formulation problems.

Packaging Salcare® Super 7, Salcare® Super 7 AT1, are available in 25 kg and 220 kg
drums.

Health & Safety Detailed information on handling and any precautions to be observed in the use
of the product described in this leaflet can be found in the relevant Health and
Safety information sheet.

Polymer, all the monomers are on EINECS: 230-993-8 and 201-173-7

Stability/Storage The product is stable when stored in the original sealed containers between 10 – 30 °C
for 24 months.

Temperatur below 10 °C can solidify the product on freezing which is reversible


when warning the product up to 30 °C

Note This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors may
affect processing or application/use, we recommend that you make tests to
determine the suitability of a product for your particular purpose prior to use. It
does not relieve our customers from the obligation to perform a full inspection of
the products upon delivery or any other obligation. NO WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT
INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE
CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.

January 2013
04_100130e-02 January 2013 Page 4 of 4 Salcare® Super 7/ Salcare® Super 7 AT1

BASF - Care Chemicals Division - www.personal-care.basf.com

You might also like