Scribd
Upload
504 views

Process Data Sheet Funnel Rev.1

The document is a data sheet for a funnel that will be used at a chemical plant. It provides specifications for the funnel including the site location, service type, number required, operating hours, inlet and outlet conditions, dimensions, materials, nozzles, weights, and notes. The funnel will operate 24 hours a day, receiving two inlet flows - one of 650 cubic meters per hour and one of 77 cubic meters per hour, both at 33 degrees Celsius. It will be made of A283 Gr C steel with a rubber lining and have a diameter of 24 inches and height of 800 mm.

Uploaded by

Dangol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
504 views

Process Data Sheet Funnel Rev.1

The document is a data sheet for a funnel that will be used at a chemical plant. It provides specifications for the funnel including the site location, service type, number required, operating hours, inlet and outlet conditions, dimensions, materials, nozzles, weights, and notes. The funnel will operate 24 hours a day, receiving two inlet flows - one of 650 cubic meters per hour and one of 77 cubic meters per hour, both at 33 degrees Celsius. It will be made of A283 Gr C steel with a rubber lining and have a diameter of 24 inches and height of 800 mm.

Uploaded by

Dangol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DATA SHEET OF FUNNEL

CLIENT : PT PUPUK ISKANDAR MUDA SIGN DATE


PROJECT : NPK CHEMICAL PLANT BY
JOB. NO : CHECKED
ITEM. NO : REVIEWED
DOC. NO : APPROVED REV
1 SITE : PT PIM SPECIFICATION :
2 SERVICE : PHOSPORIC ACID TYPE :
3 NO. REQUIRED : 1 MANUFACTURE :
4 OPERATING HOUR : 24 HOURS MODEL NO. :
5 EQUIPMENT CHARACTERISTIC
6 SKETCH DRAWING PROCESS DESIGN DATA
7 INLET FUNNEL CONDITION
8 INLET 1
3
9 DESIGN FLOWRATE : 650 m /h (1)
0
10 TEMPERATURE : 33 C (1)
11 PRESSURE : 8 kg/cm3 (1)
12
13 INLET 2
3
14 DESIGN FLOWRATE : 77 m /h (2)
0
15 TEMPERATURE : 33 C (2)
3
16 PRESSURE : 9 kg/cm (2)
17
18 OUTLET FUNNEL CONDITION
19 PIPE OUTLET SIZE : 16 inch
20
21 FUNNEL SPECIFICATION
22 DIAMETER : 24 inch
23 HEIGHT FUNNEL : 800 mm
24 MATERIAL : A283 Gr C + Rubber Lining
25
26 NOZZLES
Mark Size (in) QTY. Remark
27 N1 16 1 150# F/F-Flange
28 N2 6 1 -
29
30 WEIGHT AND LOADS
31 FUNNEL WEIGHT : (*)
32 SUPPORT WEIGHT : (*)
33 NER WEIGHT : (*)
34
35
Painting included
36 Support & platform included
37
38
39 NOTE :
40 (*) SHOULD BE SPECIFIED BY VENDOR
41 1 Balance Diagram Phosphoric Acid (NPK-600-P3-PF-007-K)
42 2 Utility Header Diagram Phosphoric Acid Supply (NPK-600-P3-HD-008-K)

You might also like