status: 01.10.
2020
page: 1 of 2
obomodulan® 700 terra – polyurethane board material
Applications Properties
• design studies • fine cell structure
• laminating models • easy to shape and machine
• master models • high edge resistance
• vacuum forming moulds
• foundry patterns
Technical data (measured average values)
Density approx. 720 kg/m³
Colour terra
Compressive strength 30 - 35 MPa DIN EN ISO 604
Bending strength 25 - 30 MPa DIN EN ISO 178
Linear thermal expansion coefficient 45 - 50 x 10ˉ6 · Kˉ1 according to
temperature from approx. 25 - 70 °C DIN 53752
Shore hardness 69 - 77 Shore-D DIN 53505
Deflection temperature 80 - 85 °C
Standard dimensions 2000 x 500 x 50 mm 2000 x 1000 x 50 mm
2000 x 500 x 75 mm 2000 x 1000 x 75 mm
2000 x 500 x 100 mm 2000 x 1000 x 100 mm
Other dimensions, cut size parts and glued blocks on request.
glue OBO-bond brown
Mixing ratio by proportion of weight Resin Hardener
100 50
Pot life 150 g / 20 °C 15 - 20 min.
Curing time at room temperature 8 - 10 hours
Storage The boards must be stored dry, on a flat underground, at room
temperature! Strong temperature differences during storage and transport
should be avoided.
OBO-Werke GmbH ⴰ Am Bahnhof 5 ⴰ 31655 Stadthagen ⴰ Germany
Phone ++49/5721/7801-0 email:
[email protected] www.obo-werke.de
Sitz der Gesellschaft: Stadthagen, Registergericht: Amtsgericht Stadthagen HRB 907 ⴰ Geschäftsführer: Kurt Hüther, Torben Teichler
status: 01.10.2020
page: 2 of 2
obomodulan® 700 terra - polyurethane board material
Machining Before machining, the boards should acclimatise at a temperature
of 18 - 25 °C.
The obomodulan® materials can be machined with all standard wood
and metal working machines. The used milling cutters should be made
of carbide. Solid carbide for small milling cutters and hard metal carbide
blades for larger milling cutter diameters. The geometry of the cutting
tools is the same as for the machining of aluminium. However, we
recommend that you test your own machines in order to get the best
possible results.
Working and safety Please read the material safety data sheet for all necessary information
recommendations on health and safety at work and the general safety recommendations.
Waste disposal After prior consultation of the responsible authorities (waste management
company, district, trade supervision office, etc.), cured PU foam can be
disposed as household or commercial waste in most regions.
Legal notice All information about the material, the processing and machining are
given without obligation to the best of our knowledge and are not to be
taken as an assurance of the properties of the material or the processing
and application possibilities in individual cases.
The user must check the product himself for its suitability for the
intended application. In all other respects our terms of sale apply,
which can be viewed and downloaded at any time from our homepage
www.obo-werke.de.
OBO-Werke GmbH ⴰ Am Bahnhof 5 ⴰ 31655 Stadthagen ⴰ Germany
Phone ++49/5721/7801-0 email:
[email protected] www.obo-werke.de
Sitz der Gesellschaft: Stadthagen, Registergericht: Amtsgericht Stadthagen HRB 907 ⴰ Geschäftsführer: Kurt Hüther, Torben Teichler
