Scribd
Upload
254 views2 pages

PUCARO Elboard ZF

This document provides specifications for PUCARO Elboard ZF Type B 4.1 pressboard insulation material. It lists the following key details: 1. The material has insulation class A (105°C) and is made from 100% sulphate wood pulp. 2. It is available in trimmed sizes from 1050x1020mm to 2100x4100mm and thicknesses from 0.8-6.0mm. 3. Test values are provided for properties like thickness, density, tensile strength, elongation, shrinkage, moisture content, ash content, conductivity, pH, oil absorption, and electric strength in oil.

Uploaded by

mzagli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
254 views2 pages

PUCARO Elboard ZF

This document provides specifications for PUCARO Elboard ZF Type B 4.1 pressboard insulation material. It lists the following key details: 1. The material has insulation class A (105°C) and is made from 100% sulphate wood pulp. 2. It is available in trimmed sizes from 1050x1020mm to 2100x4100mm and thicknesses from 0.8-6.0mm. 3. Test values are provided for properties like thickness, density, tensile strength, elongation, shrinkage, moisture content, ash content, conductivity, pH, oil absorption, and electric strength in oil.

Uploaded by

mzagli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PUCARO Elboard ZF

Type B 4.1 in accordance to IEC 641-1

Features:

• Insulation class A (105 °C) in accordance to VDE 0530 Part 1


• Soft calandered pressboard made from 100 % sulphate wood pulp, of high
purity, high oil absorption and capability of being shaped.
• Natural-coloured
• Good compatibility with liquid dielectrics

Available:

• Trimmed on four sides


approx 1050 mm x 1020 mm
approx 1050 mm x 2050 mm
approx 2100 mm x 2050 mm
approx 2100 mm x 4100 mm
• Special dimensions on request
• Available thicknesses 0.8 - 6.0 mm
01/2001

Page 1
PUCARO Elboard ZF
Type B 4.1 in accordance to IEC 641-1

Material Properties:

Unit Data according to IEC 641-3-1 B.4.1 Test values*

≤ 1.6 mm max. ± 7.5 % 1.60


Thickness mm
> 1.6 - 8.0 mm max. ± 5.0 % 2.07
3
Apparent density g/cm 0.85 -1.05 0.96

≤ 1.6 mm min. 65 66
2
Tensile strength M.D. N/mm > 1.6 - 3.0 mm min. 55 57
> 3.0 - 6.0 mm min. 50 56

≤ 1.6 mm min. 45 46
2
Tensile strength C.M.D. N/mm > 1.6 - 3.0 mm min. 40 42
> 3.0 - 6.0 mm min. 40 41

M.D. min. 7.0 7.1


Elongation %
C.M.D. min. 8.0 8.1

M.D. max. 1.0 0.5


Shrinkage C.M.D. % max. 1.4 1.0
Thickness max. 6.0 4.3

Moisture content at delivery % max. 8.0 7.0

Ash content % max. 1.0 0.3

Conductivity of
mS/m max. 8.0 6.1
aqueous extract

pH of aqueous extract 6.0 - 9.0 7.5

Oil absorption % min. 20.0 37

≤ 1.6 mm min. 35 36
Electric strength in oil kV/mm > 1.6 - 3.0 mm min. 30 32
> 3.0 - 6.0 mm min. 30 31

* These tests have been carried out on transformerboard thicknesses 1.5 mm, 2.0 mm und 3.2 mm

The above values, which have been determined by careful tests, provide only general information. PUCARO has
implemented several programs to assure the highest quality and reliability of this product. However, no responsibility is
assumed for its use.
01/2001

Page 2

You might also like