Scribd
Upload
119 views

TMS-4 Software Install

The document provides instructions for installing TMS-4 software and drivers on Windows 2000 and Windows XP operating systems. It outlines setting up the parallel port as an ECP printer port, installing the TMS-4 driver from the included CD, and then installing the TMS-4 software. The final step is to import the VKS calibration table file after rebooting. The instructions include screenshots and step-by-step details for completing each part of the installation and setup process.

Uploaded by

SALAH YOUNIS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views

TMS-4 Software Install

The document provides instructions for installing TMS-4 software and drivers on Windows 2000 and Windows XP operating systems. It outlines setting up the parallel port as an ECP printer port, installing the TMS-4 driver from the included CD, and then installing the TMS-4 software. The final step is to import the VKS calibration table file after rebooting. The instructions include screenshots and step-by-step details for completing each part of the installation and setup process.

Uploaded by

SALAH YOUNIS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 28

TMS-4 Software Install

System requirements

Operating System: Windows 2000, WindowsXP


CPU: Pentium 600MHz minimum required. 1GHz or higher processor
clock speed recommended.
RAM: 256MB minimum required. 512MB or higher recommended.
HDD: 100MB of available space to install TMS software
25GB of available space to store up to 50,000 Exams.
CD-ROM drive: Required to install the Software and Calibration data
Parallel Port: ECP supported Parallel port required.
MDAC: The latest version required.
(Microsoft Data Access Components)
Step1：Setup Drivers

TMS-4 driver should be installed, prior to installing TMS software.


Select your Operating System and follow the instructions.

Windows2000 Go to the next page

This part shows you how to install TMS software with Windows 2000.

WindowsXP Go to the page 11

This part shows you how to install TMS software with Windows XP

1
Windows2000

１ Start Windows2000 operated PC（Log in as Administartors）

２ Insert TMS-4 Software CD-ROM onto CD-ROM drive

３ Right click on “MyComputer”, select “Properties” to show the system properties.

2
４ Click on Hardware tab and click Device Manager… to go to Device Manager

3
５ Double Click “Ports (COM ＆ LPT)” and check there is “ECP Printer Port (LPT1)”

Note
-When the port is NOT setup as ECP Printer Port, please refer to the operating
manual of your PC or ask the dealer for help.
-When LPT1 (or the port that is connected with TMS-4) is not setup as ECP,
TMS-4 does not work normally.
-The Paralell port on your PC may be occupied by normal printer. Though the
printer is connected through TMS-4 output port, it is not available to use
TMS-4 and printer at the same time.
-Universal Serial Bus (USB) port is recommended to use both TMS-4 and
Printer with the same PC

4
６ Double click “ECP Printer Port (LPT1)” and show “Properties
Click UpDate Driver… button in “Driver” tab

Follow the instruction of “Upgrade Device Driver Wizard”. See following instructions with
pictures.

5
Click

② Click
① Select

6
Click

Click

Selcet “CD-ROM drive” – “Driver” –


“Windows2000” – “others”

7
Click

Click

8
Click

Click

9
７ When coming back to “Device Manager”, please make sure that the Ports (COM &
LPT) settings looks like shown above picture.
This is all for the TMS-4 driver setup.

Go on to the Step2 TMS-4 Software Install

10
WindowsXP

１ Start WindowsXP (Log in as “Administartor”)

２ Insert TMS-4 Software CD-ROM onto CD-ROM drive

３ Right click on “MyComputer”, select “Properties” to show the system properties.

11
４ Click on Hardware tab and click Device Manager… to go to Device Manager

12
５ Double Click “Ports (COM ＆ LPT)” and check there is “ECP Printer Port (LPT1)”

Note
-When the port is NOT setup as ECP Printer Port, please refer to the operating
manual of your PC or ask the dealer for help.
-When LPT1 (or the port that is connected with TMS-4) is not setup as ECP,
TMS-4 does not work normally.
-The Paralell port on your PC may be occupied by normal printer. Though the
printer is connected through TMS-4 output port, it is not available to use
TMS-4 and printer at the same time.
-Universal Serial Bus (USB) port is recommended to use both TMS-4 and Printer
with the same PC

13
６ Double click “ECP Printer Port (LPT1)” and show “Properties
Click UpDate Driver… button in “Driver” tab

Follow the instruction of “Upgrade Device Driver Wizard”. See following instructions with
pictures.

14
① Select

② Click

① Select ② Click

15
Click

Click

16
Go to “CD-ROM Drive” - ”Driver” –
“WindowsXP” - “Other”

Click

17
Click

Click

18
Click

19
７ When coming back to “Device Manager”, please make sure that the Ports (COM &
LPT) settings looks like shown above picture.
This is all for the TMS-4 driver setup.

Please move on to Step2 TMS-4 Software Install

20
Step2：TMS-4 Software Install

In this step, TMS-4 software will be installed into your PC.

１ “SetupTms.EXE” from CD-ROM included with the product.

Click

Click

21
Click

Click

２ Click “OK” and restart the system, when you are promoted to do so. This process is
important to enable setup with drivers and TMS software.

22
Step3：VKS Calibration Table Install

1, After rebooting Widnows, turn on the TMS-4 main switch and wait until the unit
completes initialization. (After completing, the alignment monitor will be into power saving
mode)

2, Select “VKS Table Import” from “Utilities”.

3, Insert TMS CD-ROM into CD-ROM Drive and select the drive from above menu. Select
“VKSTBL0.BLK” file from the serial number folder and press “OK”.

This is the end of all Setup

23
0123
ID: 0304

You might also like