Scribd
Upload
52 views1 page

Gate Valve Specification Manuf'S Offer: Signature & Seal of Manufacturer

Uploaded by

DIPANKAR LALA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views1 page

Gate Valve Specification Manuf'S Offer: Signature & Seal of Manufacturer

Uploaded by

DIPANKAR LALA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STANDARD SPECIFICATION NO.

VALVE MATERIAL
SPECIFICATION 6-44-0006 Rev. 6
Page 47 of 415

Client : Engineers India Ltd. Dept./Sect. : 16/43


Project : Std. Specification
Location : New Delhi Tag No: 51313 Sheet No. 1 of 1

GATE VALVE SPECIFICATION MANUF'S OFFER


TAG NO. : 51313 PIPING CLASS : A19A STANDARD:
RATING : 150 STANDARD : API 600/ ISO 10434 MFGRS CAT/FIG:
SIZE RANGE : 2.0" TO 24.0" ENDS : FLGD TO B-16.5 RF/125AARH RATING: ENDS:
DESCRIPTION CONSTRUCTION MATERIAL CONSTRUCTION MATERIAL
BODY CAST ASTM A 216 GR.WCB

BONNET BOLTED ASTM A 216 GR.WCB

STEM RISING SS 304/ SS 316; (NO CASTING)

WEDGE DISC SOLID/FLEXIBLE SS 304

BODY SEAT RING RENEWABLE/NON- SS 304


RENEWABLE
STEM PACKING RENEWABLE WITH CORROSION INHIBITED DIE FORMED FLEXIBLE
VALVE OPEN ON GRAPHITE WITH BRAIDED ANTI EXTRUSION
STREAM RINGS
HAND WHEEL NON RISING MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON

BONNET BOLTS ASTM A193 GR.B7

BONNET NUTS ASTM A194 GR.2H

BONNET GASKET SP WND SS316-GRAFOIL FILLER/CORRUGATED


SS316
REQUIREMENT OF REFER TECHNICAL NOTES FOR PURCHASE OF
GEAR OPERATOR VALVES.
REQUIREMENT OF REFER TECHNICAL NOTES FOR PURCHASE OF
RADIOGRAPHY VALVES.
SPECIAL SERVICE CAUSTIC SERVICE (MAX.TEMP.110 DEG.C) &
CONDITIONS AMINE
BACK SEAT & SS 304
SHOULDER
OTHERS O.S & Y.

HYDROSTATIC TEST BODY : 450 PSIG SEAT : 325 PSIG


PRESSURE
TEST PRESSURE 80 PSIG
WITH AIR

NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2 BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
3 NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
4 50% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
SIGNATURE
5 VALVES AS PER API-600 AND TESTING AS PER API-598 ARE ALSO ACCEPTABLE.
&
SEAL
OF MANUFACTURER

SHEET REV. NO. 2 3 4 5

DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 51313


Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved

You might also like