Design Doc No.: Design of Connections for Resisting Shear Rev. No.

0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS

Design of shear connection between beam to beam: As per AISC 13th Edition (ASD)
No. of Column =

Sectional Properties of supported BEAM: Sectional Properties of supporting BEAM: (bolt dist)/2 =
IPE200 HW300x300 Bolt C.G (Horz.) =
Overall Depth, D = 200.0 mm Overall Depth, D = 300.0 mm
Width of Flange, B = 100.0 mm Width of Flange, B = 300.0 mm
Thickness of Flange, tf = 8.5 mm Thickness of Flange, tf = 15.0 mm
Thickness of Web, tw = 5.6 mm Thickness of Web, tw = 10.0 mm
Root Radius, rc = 1.20 cm Root Radius, rc = 2.00 cm

Sectional Area, Aa = Sectional Area, Aa =

Moment of Inertia, Ix = Moment of Inertia, Ix =
Moment of Inertia, Iy = Moment of Inertia, Iy =
Elastic Section Modulus, Zx = Elastic Section Modulus, Zx =
Radius of Gyration, ry = Radius of Gyration, ry =
Area of Flange, Af = Area of Flange, Af =
Web depth, d = D - 2tf = 183 mm Web depth, d = D - 2tf = 270 mm

Mass of the Section, m = Mass of the Section, m =

Yield Stress, fy = 235 N/mm2 Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2 Ultimate Stress, fu = 360 N/mm2

Thickness of Fin Plate, tfp = 20 mm

Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2

Thickness of Web Reinforcement Plate = 0 mm Electrode tensile strength= 482.7 MPa

Electrode E70XX 1Ksi = 6.895 Mpa

DESIGN CONNECTION FORCE :

Shear Force, V = 62.0 kN
Tension Force, T = 385.0 kN

Design of Bolts :
Depth of Fin Plate, Dfp = 159 mm - Minimum of [ D - 2 (tf + rc) ]- Supported Beam or [ D - 2 tf ] -
Supporting Beam
Provided Depth of Fin Plate, Dfp = 190 mm
Min. Bolt location from Supporting Beam web centre, e1 = 186 mm - Bf/2 + 10 + 1.5Bolt Hole dia + allowance for Reinforcement Plate
Provide, e1 = 215 mm
e2 = minimum (e1 + 3 db) = 275 mm - second bolt line to have minimum bolt to bolt distance
Provide, e2 = 275 mm
Provide, e3 = 335 mm

Grade of Bolt : A325 - Bearing Type Connection

Bolt Shear Stress, Fnv = 330 N/mm2
Bolt Tensile Stress, Fnt = 620 N/mm2
Diameter of bolts = 20 mm Bolt Hole Dia = 22 mm
Net area of bolt, Ab = 314 mm2
Number of bolts Column = 3 Number of bolts Row = 3 - bolts are placed centrally kb = 0.66
Zbolt = 509 mm - Valid upto 8 bolts in one line Bearing Thickness = 5.6 mm

Bolt to bolt vertical distance = 60 mm = 3.00 x bolt dia Ω= 2 Refer J3.6 & J3.10 of AISC360
Bolt edge distance (vertical) = 35.0 mm Edge distance is available
Bolt edge distance (horizontal) = 55 mm
Bolt pitch distance = 60 mm

DESIGN FORCE on centre of Bolt Group :

Shear Force, Vb = V = 62.0 kN
Tension Force, Tb = T = 385.0 kN
Moment, Mb = V.e = 17.1 kN-m

Max Force on one Bolt:

Vertical shear force, sbv = 6.9 kN
Hoz shear force due to tension, sbht = 42.8 kN
Vertical shear force due to moment, sbvm = 23.7 kN
Horz. shear force due to moment, sbhm = 23.7 kN
Resultant max. shear in one bolt, Vsf = 73.2 kN
Nominal Shear Strength of Bolt, FntAb/Ω = 51.84 kN Refer equation J3-1 of AISC360
Nominal Bearing Strength of Bolt, (min of (1.2LctFu or 2.4dtFu)/Ω) = 42.34 kN Refer equation J3-6a of AISC360
Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS
Design Bolt Strength, Vds = 42 kN

Vsf / Vds = 1.728 Unsafe

Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS
Design of Fin Plate at bolt centre line :

DESIGN FORCE on Fin Plate : Thickness of Fin Plate, tfp = 20 mm

Shear Force, Vfp = V = 62.0 kN Yield Stress, fy = 235 N/mm2
Tension Force, Tfp = T = 385.0 kN Ultimate Stress, fu = 360 N/mm2
Moment, Mfp = V.e1 = 13.3 kN-m - At first bolt line

Depth of Fin Plate, Dfp = 190 mm For tensile yeilding Ω = 1.67 Refer J4.1 of AISC360
Effective Depth of Fin Plate without bolt hole, Dfpe = 124 mm For tensile rupture Ω = 2 Refer J4.1 of AISC360
For shear yeilding Ω = 1.5 Refer J4.2 of AISC360
Sectional Area, Afp = 2480 mm2 For shear rupture Ω = 2 Refer J4.2 of AISC360
Plastic Section Modulus, Zfp = 127700 mm3 Ωb = 1.67 Refer F1(1) of AISC360

Capacity of Fin Plate :

Shear strength (Min. of 0.6FyAg/Ω or 0.6FuAnv/Ω) = 267.8 kN Refer equation J4-3 & J4-4 of AISC360 Vfp / Vdfp = 0.23 Safe

Tension Strength (Min. of FyAg/Ω or FuAnv/Ω) = 446.4 kN Refer equation J4-1 & J4-2 of AISC360 Tfp / Tdfp = 0.86 Safe

Moment Strength = Z.fy/Ωb = 18.0 kN-m Refer equation F7-1 of AISC360 Mfp / Mdfp = 0.74 Safe

Combined flexure and axial tension, Pr / Pc + 8 / 9 (Mr / Mc) = 1.52 Unsafe Refer J4.1 of AISC360

BLOCK SHEAR CHECK

Check for Block Shear of Fin Plate:
Agv = 6000 mm2 Agt = 2400 mm2 Ubs = 1
Anv = 3800 mm2 Ant = 1520 mm2 Ω =2

Tdb = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 684.0 kN or 1393.2 kN
= 684.0 kN
Tfp / Tdb = 0.563 Safe

Check for Block Shear of Beam Web:

Agv = 1960 mm2 Agt = 672 mm2
Anv = 1344 mm2 Ant = 426 mm2

Tdbw = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 221.8 kN or 429.6 kN
= 221.8 kN
Tfp / Tdbw = 1.736 Unsafe

WELD DESIGN
Size of fillet weld = 10 mm - check also Minimum requirement as per Table J2.4 of AISC 360
Length of fillet weld for shear = 480 mm

DESIGN FORCE on Fin Plate : Strength of fillet weld, fwd = 973.0 kN

Shear Force, Vw = V = 62.0 kN Ω =2
Tension Force, Tw = T = 385.0 kN
Fin Plate Gross Area = 3800 mm2
Normal force in weld, fa = 385.0 kN < fwd Safe Fin Plate Net Area = 2480 mm2
Shear force in weld, q = 62.0 kN < fwd Safe Rupture Strength = 446.4 kN 1.16

Equivalent combined force in weld, fe = 390 MPa < fwd Safe Yield Strength = 446.5 kN 1.16

SUMMARY

BOLT
Grade of Bolt = A325 Bolt location from supporting beam web centre = 215 mm, 275 mm & 335 mm
Diameter of bolts = 20 mm
Number of bolts = 3 x 3

PLATE
Thickness of Fin Plate = 20 mm
Length of Fin Plate from Supporting Beam web Centre = 365 mm
Thickness of Web Reinforcement Plate = Not Required

WELD
Weld - Fin Plate to Supporting Beam Web = 10 mm
Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS

Design of shear connection between beam to beam: As per AISC 13th Edition (ASD)
No. of Column =

Sectional Properties of supported BEAM: Sectional Properties of supporting COLUMN: (bolt dist)/2 =
IPE160 HEA240 Bolt C.G (Horz.) =
Overall Depth, D = 160.0 mm Overall Depth, D = 230.0 mm
Width of Flange, B = 82.0 mm Width of Flange, B = 240.0 mm
Thickness of Flange, tf = 7.4 mm Thickness of Flange, tf = 12.0 mm
Thickness of Web, tw = 5.0 mm Thickness of Web, tw = 7.5 mm
Root Radius, rc = 0.90 cm Root Radius, rc = 2.10 cm

Web depth, d = D - 2tf = 145 mm Web depth, d = D - 2tf = 206 mm

Mass of the Section, m = Mass of the Section, m =

Yield Stress, fy = 235 N/mm2 Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2 Ultimate Stress, fu = 360 N/mm2

Thickness of Fin Plate, tfp = 10 mm

Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2

Thickness of Web Reinforcement Plate = 0 mm Electrode tensile strength= 482.7 MPa

Electrode E70XX 1Ksi = 6.895 Mpa

DESIGN CONNECTION FORCE :

Shear Force, V = 3.0 kN
Tension Force, T = 5.0 kN

Design of Bolts :
Depth of Fin Plate, Dfp = 127 mm - Minimum of [ D - 2 (tf + rc) ]- Supported Beam or [ D - 2 tf ] -
Supporting Beam
Provided Depth of Fin Plate, Dfp = 125 mm
Min. Bolt location from Supporting Beam web centre, e1 = 156 mm - Bf/2 + 10 + 1.5Bolt Hole dia + allowance for Reinforcement Plate
Provide, e1 = 160 mm
e2 = minimum (e1 + 3 db) = 0 mm - second bolt line to have minimum bolt to bolt distance
Provide, e2 = 0 mm
Provide, e3 = 0 mm

Grade of Bolt : A325 - Bearing Type Connection

Bolt Shear Stress, Fnv = 330 N/mm2
Bolt Tensile Stress, Fnt = 620 N/mm2
Diameter of bolts = 20 mm Bolt Hole Dia = 22 mm
Net area of bolt, Ab = 314 mm2
Number of bolts Column = 1 Number of bolts Row = 2 - bolts are placed centrally kb = -0.25
Zbolt = 65 mm - Valid upto 8 bolts in one line Bearing Thickness = 5.0 mm

Bolt to bolt vertical distance = 65 mm = 3.25 x bolt dia Ω= 2 Refer J3.6 & J3.10 of AISC360
Bolt edge distance (vertical) = 30.0 mm Edge distance is available
Bolt edge distance (horizontal) = 30 mm
Bolt pitch distance = 0 mm

DESIGN FORCE on centre of Bolt Group :

Shear Force, Vb = V = 3.0 kN
Tension Force, Tb = T = 5.0 kN
Moment, Mb = V.e = 0.5 kN-m

Max Force on one Bolt:

Vertical shear force, sbv = 1.5 kN
Hoz shear force due to tension, sbht = 2.5 kN
Vertical shear force due to moment, sbvm = 0.0 kN
Horz. shear force due to moment, sbhm = 7.4 kN
Resultant max. shear in one bolt, Vsf = 10.0 kN
Nominal Shear Strength of Bolt, FntAb/Ω = 51.84 kN Refer equation J3-1 of AISC360
Nominal Bearing Strength of Bolt, (min of (1.2LctFu or 2.4dtFu)/Ω) = 32.40 kN Refer equation J3-6a of AISC360
Design Bolt Strength, Vds = 32 kN

Vsf / Vds = 0.309 Safe

Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS
Design of Fin Plate at bolt centre line :

DESIGN FORCE on Fin Plate : Thickness of Fin Plate, tfp = 10 mm

Shear Force, Vfp = V = 3.0 kN Yield Stress, fy = 235 N/mm2
Tension Force, Tfp = T = 5.0 kN Ultimate Stress, fu = 360 N/mm2
Moment, Mfp = V.e1 = 0.5 kN-m - At first bolt line

Depth of Fin Plate, Dfp = 125 mm For tensile yeilding Ω = 1.67 Refer J4.1 of AISC360
Effective Depth of Fin Plate without bolt hole, Dfpe = 81 mm For tensile rupture Ω = 2 Refer J4.1 of AISC360
For shear yeilding Ω = 1.5 Refer J4.2 of AISC360
Sectional Area, Afp = 810 mm2 For shear rupture Ω = 2 Refer J4.2 of AISC360
Plastic Section Modulus, Zfp = 24763 mm3 Ωb = 1.67 Refer F1(1) of AISC360

Capacity of Fin Plate :

Shear strength (Min. of 0.6FyAg/Ω or 0.6FuAnv/Ω) = 87.5 kN Refer equation J4-3 & J4-4 of AISC360 Vfp / Vdfp = 0.03 Safe

Tension Strength (Min. of FyAg/Ω or FuAnv/Ω) = 145.8 kN Refer equation J4-1 & J4-2 of AISC360 Tfp / Tdfp = 0.03 Safe

Moment Strength = Z.fy/Ωb = 3.5 kN-m Refer equation F7-1 of AISC360 Mfp / Mdfp = 0.14 Safe

Combined flexure and axial tension, Pr / Pc + 8 / 9 (Mr / Mc) = 0.15 Safe Refer J4.1 of AISC360

BLOCK SHEAR CHECK

Check for Block Shear of Fin Plate:
Agv = 600 mm2 Agt = 650 mm2 Ubs = 1
Anv = 380 mm2 Ant = 430 mm2 Ω =2

Tdb = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 118.4 kN or 239.4 kN
= 118.4 kN
Tfp / Tdb = 0.042 Safe

Check for Block Shear of Beam Web:

Agv = 300 mm2 Agt = 325 mm2
Anv = 190 mm2 Ant = 215 mm2

Tdbw = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 59.2 kN or 119.7 kN
= 59.2 kN
Tfp / Tdbw = 0.084 Safe

WELD DESIGN
Size of fillet weld = 6 mm - check also Minimum requirement as per Table J2.4 of AISC 360
Length of fillet weld for shear = 355 mm

DESIGN FORCE on Fin Plate : Strength of fillet weld, fwd = 431.2 kN

Shear Force, Vw = V = 3.0 kN Ω =2
Tension Force, Tw = T = 5.0 kN
Fin Plate Gross Area = 1250 mm2
Normal force in weld, fa = 5.0 kN < fwd Safe Fin Plate Net Area = 810 mm2
Shear force in weld, q = 3.0 kN < fwd Safe Rupture Strength = 145.8 kN 29.16

Equivalent combined force in weld, fe = 6 MPa < fwd Safe Yield Strength = 146.9 kN 29.38

SUMMARY

BOLT
Grade of Bolt = A325 Bolt location from supporting beam web centre = 160 mm, 0 mm & 0 mm
Diameter of bolts = 20 mm
Number of bolts = 2 x 3

PLATE
Thickness of Fin Plate = 10 mm
Length of Fin Plate from Supporting Beam web Centre = 190 mm
Thickness of Web Reinforcement Plate = Not Required

WELD
Weld - Fin Plate to Supporting Beam Web = 6 mm
Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS

Design of shear connection between beam to beam: As per AISC 13th Edition (ASD)
No. of Column =

Sectional Properties of supported BEAM: Sectional Properties of supporting COLUMN: (bolt dist)/2 =
IPE240 HEA240 Bolt C.G (Horz.) =
Overall Depth, D = 240.0 mm Overall Depth, D = 230.0 mm
Width of Flange, B = 120.0 mm Width of Flange, B = 240.0 mm
Thickness of Flange, tf = 9.8 mm Thickness of Flange, tf = 12.0 mm
Thickness of Web, tw = 6.2 mm Thickness of Web, tw = 7.5 mm
Root Radius, rc = 1.50 cm Root Radius, rc = 2.10 cm

Web depth, d = D - 2tf = 220 mm Web depth, d = D - 2tf = 206 mm

Mass of the Section, m = Mass of the Section, m =

Yield Stress, fy = 235 N/mm2 Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2 Ultimate Stress, fu = 360 N/mm2

Thickness of Fin Plate, tfp = 16 mm

Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2

Thickness of Web Reinforcement Plate = 0 mm Electrode tensile strength= 482.7 MPa

Electrode E70XX 1Ksi = 6.895 Mpa

DESIGN CONNECTION FORCE :

Shear Force, V = 59.0 kN
Tension Force, T = 36.0 kN

Design of Bolts :
Depth of Fin Plate, Dfp = 190 mm - Minimum of [ D - 2 (tf + rc) ]- Supported Beam or [ D - 2 tf ] -
Supporting Beam
Provided Depth of Fin Plate, Dfp = 190 mm
Min. Bolt location from Supporting Beam web centre, e1 = 156 mm - Bf/2 + 10 + 1.5Bolt Hole dia + allowance for Reinforcement Plate
Provide, e1 = 165 mm
e2 = minimum (e1 + 3 db) = 225 mm - second bolt line to have minimum bolt to bolt distance
Provide, e2 = 225 mm
Provide, e3 = 0 mm

Grade of Bolt : A325 - Bearing Type Connection

Bolt Shear Stress, Fnv = 330 N/mm2
Bolt Tensile Stress, Fnt = 620 N/mm2
Diameter of bolts = 20 mm Bolt Hole Dia = 22 mm
Net area of bolt, Ab = 314 mm2
Number of bolts Column = 2 Number of bolts Row = 3 - bolts are placed centrally kb = 0.80
Zbolt = 327 mm - Valid upto 8 bolts in one line Bearing Thickness = 6.2 mm

Bolt to bolt vertical distance = 65 mm = 3.25 x bolt dia Ω= 2 Refer J3.6 & J3.10 of AISC360
Bolt edge distance (vertical) = 30.0 mm Edge distance is available
Bolt edge distance (horizontal) = 35 mm
Bolt pitch distance = 60 mm

DESIGN FORCE on centre of Bolt Group :

Shear Force, Vb = V = 59.0 kN
Tension Force, Tb = T = 36.0 kN
Moment, Mb = V.e = 11.5 kN-m

Max Force on one Bolt:

Vertical shear force, sbv = 9.8 kN
Hoz shear force due to tension, sbht = 6.0 kN
Vertical shear force due to moment, sbvm = 16.5 kN
Horz. shear force due to moment, sbhm = 31.1 kN
Resultant max. shear in one bolt, Vsf = 45.5 kN
Nominal Shear Strength of Bolt, FntAb/Ω = 51.84 kN Refer equation J3-1 of AISC360
Nominal Bearing Strength of Bolt, (min of (1.2LctFu or 2.4dtFu)/Ω) = 46.87 kN Refer equation J3-6a of AISC360
Design Bolt Strength, Vds = 47 kN

Vsf / Vds = 0.971 Safe

Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS
Design of Fin Plate at bolt centre line :

DESIGN FORCE on Fin Plate : Thickness of Fin Plate, tfp = 16 mm

Shear Force, Vfp = V = 59.0 kN Yield Stress, fy = 235 N/mm2
Tension Force, Tfp = T = 36.0 kN Ultimate Stress, fu = 360 N/mm2
Moment, Mfp = V.e1 = 9.7 kN-m - At first bolt line

Depth of Fin Plate, Dfp = 190 mm For tensile yeilding Ω = 1.67 Refer J4.1 of AISC360
Effective Depth of Fin Plate without bolt hole, Dfpe = 124 mm For tensile rupture Ω = 2 Refer J4.1 of AISC360
For shear yeilding Ω = 1.5 Refer J4.2 of AISC360
Sectional Area, Afp = 1984 mm2 For shear rupture Ω = 2 Refer J4.2 of AISC360
Plastic Section Modulus, Zfp = 98640 mm3 Ωb = 1.67 Refer F1(1) of AISC360

Capacity of Fin Plate :

Shear strength (Min. of 0.6FyAg/Ω or 0.6FuAnv/Ω) = 214.3 kN Refer equation J4-3 & J4-4 of AISC360 Vfp / Vdfp = 0.28 Safe

Tension Strength (Min. of FyAg/Ω or FuAnv/Ω) = 357.1 kN Refer equation J4-1 & J4-2 of AISC360 Tfp / Tdfp = 0.10 Safe

Moment Strength = Z.fy/Ωb = 13.9 kN-m Refer equation F7-1 of AISC360 Mfp / Mdfp = 0.70 Safe

Combined flexure and axial tension, Pr / Pc + 8 / 9 (Mr / Mc) = 0.75 Safe Refer J4.1 of AISC360

BLOCK SHEAR CHECK

Check for Block Shear of Fin Plate:
Agv = 2880 mm2 Agt = 2080 mm2 Ubs = 1
Anv = 1824 mm2 Ant = 1376 mm2 Ω =2

Tdb = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 444.7 kN or 901.4 kN
= 444.7 kN
Tfp / Tdb = 0.081 Safe

Check for Block Shear of Beam Web:

Agv = 1178 mm2 Agt = 806 mm2
Anv = 769 mm2 Ant = 533 mm2

Tdbw = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 179.0 kN or 358.1 kN
= 179.0 kN
Tfp / Tdbw = 0.201 Safe

WELD DESIGN
Size of fillet weld = 6 mm - check also Minimum requirement as per Table J2.4 of AISC 360
Length of fillet weld for shear = 355 mm

DESIGN FORCE on Fin Plate : Strength of fillet weld, fwd = 431.2 kN

Shear Force, Vw = V = 59.0 kN Ω =2
Tension Force, Tw = T = 36.0 kN
Fin Plate Gross Area = 3040 mm2
Normal force in weld, fa = 36.0 kN < fwd Safe Fin Plate Net Area = 1984 mm2
Shear force in weld, q = 59.0 kN < fwd Safe Rupture Strength = 357.1 kN 9.92

Equivalent combined force in weld, fe = 69 MPa < fwd Safe Yield Strength = 357.2 kN 9.92

SUMMARY

BOLT
Grade of Bolt = A325 Bolt location from supporting beam web centre = 165 mm, 225 mm & 0 mm
Diameter of bolts = 20 mm
Number of bolts = 3 x 3

PLATE
Thickness of Fin Plate = 16 mm
Length of Fin Plate from Supporting Beam web Centre = 255 mm
Thickness of Web Reinforcement Plate = Not Required

WELD
Weld - Fin Plate to Supporting Beam Web = 6 mm
Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS

Design of shear connection between beam to beam: As per AISC 13th Edition (ASD)
No. of Column =

Sectional Properties of supported BEAM: Sectional Properties of supporting COLUMN: (bolt dist)/2 =
HEA160 HEA240 Bolt C.G (Horz.) =
Overall Depth, D = 152.0 mm Overall Depth, D = 230.0 mm
Width of Flange, B = 160.0 mm Width of Flange, B = 240.0 mm
Thickness of Flange, tf = 9.0 mm Thickness of Flange, tf = 12.0 mm
Thickness of Web, tw = 6.0 mm Thickness of Web, tw = 7.5 mm
Root Radius, rc = 1.50 cm Root Radius, rc = 2.10 cm

Web depth, d = D - 2tf = 134 mm Web depth, d = D - 2tf = 206 mm

Mass of the Section, m = Mass of the Section, m =

Yield Stress, fy = 235 N/mm2 Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2 Ultimate Stress, fu = 360 N/mm2

Thickness of Fin Plate, tfp = 10 mm

Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2

Thickness of Web Reinforcement Plate = 0 mm Electrode tensile strength= 482.7 MPa

Electrode E70XX 1Ksi = 6.895 Mpa

DESIGN CONNECTION FORCE :

Shear Force, V = 7.0 kN
Tension Force, T = 13.0 kN

Design of Bolts :
Depth of Fin Plate, Dfp = 104 mm - Minimum of [ D - 2 (tf + rc) ]- Supported Beam or [ D - 2 tf ] -
Supporting Beam
Provided Depth of Fin Plate, Dfp = 110 mm
Min. Bolt location from Supporting Beam web centre, e1 = 156 mm - Bf/2 + 10 + 1.5Bolt Hole dia + allowance for Reinforcement Plate
Provide, e1 = 160 mm
e2 = minimum (e1 + 3 db) = 0 mm - second bolt line to have minimum bolt to bolt distance
Provide, e2 = 0 mm
Provide, e3 = 0 mm

Grade of Bolt : A325 - Bearing Type Connection

Bolt Shear Stress, Fnv = 330 N/mm2
Bolt Tensile Stress, Fnt = 620 N/mm2
Diameter of bolts = 20 mm Bolt Hole Dia = 22 mm
Net area of bolt, Ab = 314 mm2
Number of bolts Column = 1 Number of bolts Row = 2 - bolts are placed centrally kb = -0.25
Zbolt = 58 mm - Valid upto 8 bolts in one line Bearing Thickness = 6.0 mm

Bolt to bolt vertical distance = 58 mm = 2.90 x bolt dia Ω= 2 Refer J3.6 & J3.10 of AISC360
Bolt edge distance (vertical) = 26.0 mm Edge distance is available
Bolt edge distance (horizontal) = 30 mm
Bolt pitch distance = 0 mm

DESIGN FORCE on centre of Bolt Group :

Shear Force, Vb = V = 7.0 kN
Tension Force, Tb = T = 13.0 kN
Moment, Mb = V.e = 1.1 kN-m

Max Force on one Bolt:

Vertical shear force, sbv = 3.5 kN
Hoz shear force due to tension, sbht = 6.5 kN
Vertical shear force due to moment, sbvm = 0.0 kN
Horz. shear force due to moment, sbhm = 19.3 kN
Resultant max. shear in one bolt, Vsf = 26.0 kN
Nominal Shear Strength of Bolt, FntAb/Ω = 51.84 kN Refer equation J3-1 of AISC360
Nominal Bearing Strength of Bolt, (min of (1.2LctFu or 2.4dtFu)/Ω) = 38.88 kN Refer equation J3-6a of AISC360
Design Bolt Strength, Vds = 39 kN

Vsf / Vds = 0.670 Safe

Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS
Design of Fin Plate at bolt centre line :

DESIGN FORCE on Fin Plate : Thickness of Fin Plate, tfp = 10 mm

Shear Force, Vfp = V = 7.0 kN Yield Stress, fy = 235 N/mm2
Tension Force, Tfp = T = 13.0 kN Ultimate Stress, fu = 360 N/mm2
Moment, Mfp = V.e1 = 1.1 kN-m - At first bolt line

Depth of Fin Plate, Dfp = 110 mm For tensile yeilding Ω = 1.67 Refer J4.1 of AISC360
Effective Depth of Fin Plate without bolt hole, Dfpe = 66 mm For tensile rupture Ω = 2 Refer J4.1 of AISC360
For shear yeilding Ω = 1.5 Refer J4.2 of AISC360
Sectional Area, Afp = 660 mm2 For shear rupture Ω = 2 Refer J4.2 of AISC360
Plastic Section Modulus, Zfp = 17490 mm3 Ωb = 1.67 Refer F1(1) of AISC360

Capacity of Fin Plate :

Shear strength (Min. of 0.6FyAg/Ω or 0.6FuAnv/Ω) = 71.3 kN Refer equation J4-3 & J4-4 of AISC360 Vfp / Vdfp = 0.10 Safe

Tension Strength (Min. of FyAg/Ω or FuAnv/Ω) = 118.8 kN Refer equation J4-1 & J4-2 of AISC360 Tfp / Tdfp = 0.11 Safe

Moment Strength = Z.fy/Ωb = 2.5 kN-m Refer equation F7-1 of AISC360 Mfp / Mdfp = 0.46 Safe

Combined flexure and axial tension, Pr / Pc + 8 / 9 (Mr / Mc) = 0.51 Safe Refer J4.1 of AISC360

BLOCK SHEAR CHECK

Check for Block Shear of Fin Plate:
Agv = 600 mm2 Agt = 580 mm2 Ubs = 1
Anv = 380 mm2 Ant = 360 mm2 Ω =2

Tdb = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 105.8 kN or 214.2 kN
= 105.8 kN
Tfp / Tdb = 0.123 Safe

Check for Block Shear of Beam Web:

Agv = 360 mm2 Agt = 348 mm2
Anv = 228 mm2 Ant = 216 mm2

Tdbw = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 63.5 kN or 128.5 kN
= 63.5 kN
Tfp / Tdbw = 0.205 Safe

WELD DESIGN
Size of fillet weld = 6 mm - check also Minimum requirement as per Table J2.4 of AISC 360
Length of fillet weld for shear = 355 mm

DESIGN FORCE on Fin Plate : Strength of fillet weld, fwd = 431.2 kN

Shear Force, Vw = V = 7.0 kN Ω =2
Tension Force, Tw = T = 13.0 kN
Fin Plate Gross Area = 1100 mm2
Normal force in weld, fa = 13.0 kN < fwd Safe Fin Plate Net Area = 660 mm2
Shear force in weld, q = 7.0 kN < fwd Safe Rupture Strength = 118.8 kN 9.14

Equivalent combined force in weld, fe = 15 MPa < fwd Safe Yield Strength = 129.3 kN 9.94

SUMMARY

BOLT
Grade of Bolt = A325 Bolt location from supporting beam web centre = 160 mm, 0 mm & 0 mm
Diameter of bolts = 20 mm
Number of bolts = 2 x 3

PLATE
Thickness of Fin Plate = 10 mm
Length of Fin Plate from Supporting Beam web Centre = 190 mm
Thickness of Web Reinforcement Plate = Not Required

WELD
Weld - Fin Plate to Supporting Beam Web = 6 mm
Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS

Design of shear connection between beam to beam: As per AISC 13th Edition (ASD)
No. of Column =

Sectional Properties of supported BEAM: Sectional Properties of supporting COLUMN: (bolt dist)/2 =
HEA200 HEA240 Bolt C.G (Horz.) =
Overall Depth, D = 190.0 mm Overall Depth, D = 230.0 mm
Width of Flange, B = 200.0 mm Width of Flange, B = 240.0 mm
Thickness of Flange, tf = 10.0 mm Thickness of Flange, tf = 12.0 mm
Thickness of Web, tw = 6.5 mm Thickness of Web, tw = 7.5 mm
Root Radius, rc = 1.80 cm Root Radius, rc = 2.10 cm

Web depth, d = D - 2tf = 170 mm Web depth, d = D - 2tf = 206 mm

Mass of the Section, m = Mass of the Section, m =

Yield Stress, fy = 235 N/mm2 Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2 Ultimate Stress, fu = 360 N/mm2

Thickness of Fin Plate, tfp = 40 mm

Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2

Thickness of Web Reinforcement Plate = 8 mm Electrode tensile strength= 482.7 MPa

Electrode E70XX 1Ksi = 6.895 Mpa

DESIGN CONNECTION FORCE :

Shear Force, V = 87.0 kN
Tension Force, T = 163.0 kN

Design of Bolts :
Depth of Fin Plate, Dfp = 134 mm - Minimum of [ D - 2 (tf + rc) ]- Supported Beam or [ D - 2 tf ] -
Supporting Beam
Provided Depth of Fin Plate, Dfp = 148 mm
Min. Bolt location from Supporting Beam web centre, e1 = 174 mm - Bf/2 + 10 + 1.5Bolt Hole dia + allowance for Reinforcement Plate
Provide, e1 = 175 mm
e2 = minimum (e1 + 3 db) = 256 mm - second bolt line to have minimum bolt to bolt distance
Provide, e2 = 256 mm
Provide, e3 = 337 mm

Grade of Bolt : A325 - Bearing Type Connection

Bolt Shear Stress, Fnv = 330 N/mm2
Bolt Tensile Stress, Fnt = 620 N/mm2
Diameter of bolts = 27 mm Bolt Hole Dia = 30 mm
Net area of bolt, Ab = 573 mm2
Number of bolts Column = 3 Number of bolts Row = 2 - bolts are placed centrally kb = 0.50
Zbolt = 384 mm - Valid upto 8 bolts in one line Bearing Thickness = 14.5 mm

Bolt to bolt vertical distance = 72 mm = 2.67 x bolt dia Ω= 2 Refer J3.6 & J3.10 of AISC360
Bolt edge distance (vertical) = 38.0 mm Edge distance is available
Bolt edge distance (horizontal) = 45 mm
Bolt pitch distance = 81 mm

DESIGN FORCE on centre of Bolt Group :

Shear Force, Vb = V = 87.0 kN
Tension Force, Tb = T = 163.0 kN
Moment, Mb = V.e = 22.3 kN-m

Max Force on one Bolt:

Vertical shear force, sbv = 14.5 kN
Hoz shear force due to tension, sbht = 27.2 kN
Vertical shear force due to moment, sbvm = 53.0 kN
Horz. shear force due to moment, sbhm = 23.6 kN
Resultant max. shear in one bolt, Vsf = 84.5 kN
Nominal Shear Strength of Bolt, FntAb/Ω = 94.47 kN Refer equation J3-1 of AISC360
Nominal Bearing Strength of Bolt, (min of (1.2LctFu or 2.4dtFu)/Ω) = 140.94 kN Refer equation J3-6a of AISC360
Design Bolt Strength, Vds = 94 kN

Vsf / Vds = 0.894 Safe

Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS
Design of Fin Plate at bolt centre line :

DESIGN FORCE on Fin Plate : Thickness of Fin Plate, tfp = 40 mm

Shear Force, Vfp = V = 87.0 kN Yield Stress, fy = 235 N/mm2
Tension Force, Tfp = T = 163.0 kN Ultimate Stress, fu = 360 N/mm2
Moment, Mfp = V.e1 = 15.2 kN-m - At first bolt line

Depth of Fin Plate, Dfp = 148 mm For tensile yeilding Ω = 1.67 Refer J4.1 of AISC360
Effective Depth of Fin Plate without bolt hole, Dfpe = 88 mm For tensile rupture Ω = 2 Refer J4.1 of AISC360
For shear yeilding Ω = 1.5 Refer J4.2 of AISC360
Sectional Area, Afp = 3520 mm2 For shear rupture Ω = 2 Refer J4.2 of AISC360
Plastic Section Modulus, Zfp = 132640 mm3 Ωb = 1.67 Refer F1(1) of AISC360

Capacity of Fin Plate :

Shear strength (Min. of 0.6FyAg/Ω or 0.6FuAnv/Ω) = 380.2 kN Refer equation J4-3 & J4-4 of AISC360 Vfp / Vdfp = 0.23 Safe

Tension Strength (Min. of FyAg/Ω or FuAnv/Ω) = 633.6 kN Refer equation J4-1 & J4-2 of AISC360 Tfp / Tdfp = 0.26 Safe

Moment Strength = Z.fy/Ωb = 18.7 kN-m Refer equation F7-1 of AISC360 Mfp / Mdfp = 0.82 Safe

Combined flexure and axial tension, Pr / Pc + 8 / 9 (Mr / Mc) = 0.98 Safe Refer J4.1 of AISC360

BLOCK SHEAR CHECK

Check for Block Shear of Fin Plate:
Agv = 16000 mm2 Agt = 2880 mm2 Ubs = 1
Anv = 10000 mm2 Ant = 1680 mm2 Ω =2

Tdb = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 1382.4 kN or 2860.8 kN
= 1382.4 kN
Tfp / Tdb = 0.118 Safe

Check for Block Shear of Beam Web:

Agv = 6003 mm2 Agt = 1044 mm2
Anv = 3828 mm2 Ant = 609 mm2

Tdbw = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 523.0 kN or 1065.7 kN
= 523.0 kN
Tfp / Tdbw = 0.312 Safe

WELD DESIGN
Size of fillet weld = 6 mm - check also Minimum requirement as per Table J2.4 of AISC 360
Length of fillet weld for shear = 355 mm

DESIGN FORCE on Fin Plate : Strength of fillet weld, fwd = 431.2 kN

Shear Force, Vw = V = 87.0 kN Ω =2
Tension Force, Tw = T = 163.0 kN
Fin Plate Gross Area = 5920 mm2
Normal force in weld, fa = 163.0 kN < fwd Safe Fin Plate Net Area = 3520 mm2
Shear force in weld, q = 87.0 kN < fwd Safe Rupture Strength = 633.6 kN 3.89

Equivalent combined force in weld, fe = 185 MPa < fwd Safe Yield Strength = 695.6 kN 4.27

SUMMARY

BOLT
Grade of Bolt = A325 Bolt location from supporting beam web centre = 175 mm, 256 mm & 337 mm
Diameter of bolts = 27 mm
Number of bolts = 2 x 3

PLATE
Thickness of Fin Plate = 40 mm
Length of Fin Plate from Supporting Beam web Centre = 375 mm
Thickness of Web Reinforcement Plate = 8 mm

WELD
Weld - Fin Plate to Supporting Beam Web = 6 mm
Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS

Design of shear connection between beam to beam: As per AISC 13th Edition (ASD)
No. of Column =

Sectional Properties of supported BEAM: Sectional Properties of supporting COLUMN: (bolt dist)/2 =
HEA240 HEA240 Bolt C.G (Horz.) =
Overall Depth, D = 230.0 mm Overall Depth, D = 230.0 mm
Width of Flange, B = 240.0 mm Width of Flange, B = 240.0 mm
Thickness of Flange, tf = 12.0 mm Thickness of Flange, tf = 12.0 mm
Thickness of Web, tw = 7.5 mm Thickness of Web, tw = 7.5 mm
Root Radius, rc = 2.10 cm Root Radius, rc = 2.10 cm

Web depth, d = D - 2tf = 206 mm Web depth, d = D - 2tf = 206 mm

Mass of the Section, m = Mass of the Section, m =

Yield Stress, fy = 235 N/mm2 Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2 Ultimate Stress, fu = 360 N/mm2

Thickness of Fin Plate, tfp = 12 mm

Yield Stress, fy = 235 N/mm2
Ultimate Stress, fu = 360 N/mm2

Thickness of Web Reinforcement Plate = 0 mm Electrode tensile strength= 482.7 MPa

Electrode E70XX 1Ksi = 6.895 Mpa

DESIGN CONNECTION FORCE :

Shear Force, V = 50.0 kN
Tension Force, T = 21.0 kN

Design of Bolts :
Depth of Fin Plate, Dfp = 164 mm - Minimum of [ D - 2 (tf + rc) ]- Supported Beam or [ D - 2 tf ] -
Supporting Beam
Provided Depth of Fin Plate, Dfp = 175 mm
Min. Bolt location from Supporting Beam web centre, e1 = 156 mm - Bf/2 + 10 + 1.5Bolt Hole dia + allowance for Reinforcement Plate
Provide, e1 = 160 mm
e2 = minimum (e1 + 3 db) = 220 mm - second bolt line to have minimum bolt to bolt distance
Provide, e2 = 220 mm
Provide, e3 = 0 mm

Grade of Bolt : A325 - Bearing Type Connection

Bolt Shear Stress, Fnv = 330 N/mm2
Bolt Tensile Stress, Fnt = 620 N/mm2
Diameter of bolts = 20 mm Bolt Hole Dia = 22 mm
Net area of bolt, Ab = 314 mm2
Number of bolts Column = 2 Number of bolts Row = 3 - bolts are placed centrally kb = 0.68
Zbolt = 294 mm - Valid upto 8 bolts in one line Bearing Thickness = 7.5 mm

Bolt to bolt vertical distance = 58 mm = 2.88 x bolt dia Ω= 2 Refer J3.6 & J3.10 of AISC360
Bolt edge distance (vertical) = 30.0 mm Edge distance is available
Bolt edge distance (horizontal) = 30 mm
Bolt pitch distance = 60 mm

DESIGN FORCE on centre of Bolt Group :

Shear Force, Vb = V = 50.0 kN
Tension Force, Tb = T = 21.0 kN
Moment, Mb = V.e = 9.5 kN-m

Max Force on one Bolt:

Vertical shear force, sbv = 8.3 kN
Hoz shear force due to tension, sbht = 3.5 kN
Vertical shear force due to moment, sbvm = 15.7 kN
Horz. shear force due to moment, sbhm = 28.2 kN
Resultant max. shear in one bolt, Vsf = 39.8 kN
Nominal Shear Strength of Bolt, FntAb/Ω = 51.84 kN Refer equation J3-1 of AISC360
Nominal Bearing Strength of Bolt, (min of (1.2LctFu or 2.4dtFu)/Ω) = 48.60 kN Refer equation J3-6a of AISC360
Design Bolt Strength, Vds = 49 kN

Vsf / Vds = 0.819 Safe

Design Doc No.: Design of Connections for Resisting Shear Rev. No. 0
Project Title Full Strength Bolted Shear Connection
Client
Name of Unit
Drawing Ref:
Designed by: Checked by: Approved by: Date:
Reference : CALCULATIONS
Design of Fin Plate at bolt centre line :

DESIGN FORCE on Fin Plate : Thickness of Fin Plate, tfp = 12 mm

Shear Force, Vfp = V = 50.0 kN Yield Stress, fy = 235 N/mm2
Tension Force, Tfp = T = 21.0 kN Ultimate Stress, fu = 360 N/mm2
Moment, Mfp = V.e1 = 8.0 kN-m - At first bolt line

Depth of Fin Plate, Dfp = 175 mm For tensile yeilding Ω = 1.67 Refer J4.1 of AISC360
Effective Depth of Fin Plate without bolt hole, Dfpe = 109 mm For tensile rupture Ω = 2 Refer J4.1 of AISC360
For shear yeilding Ω = 1.5 Refer J4.2 of AISC360
Sectional Area, Afp = 1308 mm2 For shear rupture Ω = 2 Refer J4.2 of AISC360
Plastic Section Modulus, Zfp = 61515 mm3 Ωb = 1.67 Refer F1(1) of AISC360

Capacity of Fin Plate :

Shear strength (Min. of 0.6FyAg/Ω or 0.6FuAnv/Ω) = 141.3 kN Refer equation J4-3 & J4-4 of AISC360 Vfp / Vdfp = 0.35 Safe

Tension Strength (Min. of FyAg/Ω or FuAnv/Ω) = 235.4 kN Refer equation J4-1 & J4-2 of AISC360 Tfp / Tdfp = 0.09 Safe

Moment Strength = Z.fy/Ωb = 8.7 kN-m Refer equation F7-1 of AISC360 Mfp / Mdfp = 0.92 Safe

Combined flexure and axial tension, Pr / Pc + 8 / 9 (Mr / Mc) = 0.97 Safe Refer J4.1 of AISC360

BLOCK SHEAR CHECK

Check for Block Shear of Fin Plate:
Agv = 2160 mm2 Agt = 1380 mm2 Ubs = 1
Anv = 1368 mm2 Ant = 852 mm2 Ω =2

Tdb = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 301.1 kN or 611.3 kN
= 301.1 kN
Tfp / Tdb = 0.070 Safe

Check for Block Shear of Beam Web:

Agv = 1350 mm2 Agt = 863 mm2
Anv = 855 mm2 Ant = 533 mm2

Tdbw = Minimum of [0.6 Fu Anv / Ω + Ubs Fu Ant / Ω] or [0.6 Fy Agv / Ω + Ubs Fu Ant / Ω] Refer equation J4-5 of AISC360
= 188.2 kN or 382.1 kN
= 188.2 kN
Tfp / Tdbw = 0.112 Safe

WELD DESIGN
Size of fillet weld = 6 mm - check also Minimum requirement as per Table J2.4 of AISC 360
Length of fillet weld for shear = 355 mm

DESIGN FORCE on Fin Plate : Strength of fillet weld, fwd = 431.2 kN

Shear Force, Vw = V = 50.0 kN Ω =2
Tension Force, Tw = T = 21.0 kN
Fin Plate Gross Area = 2100 mm2
Normal force in weld, fa = 21.0 kN < fwd Safe Fin Plate Net Area = 1308 mm2
Shear force in weld, q = 50.0 kN < fwd Safe Rupture Strength = 235.4 kN 11.21

Equivalent combined force in weld, fe = 54 MPa < fwd Safe Yield Strength = 246.8 kN 11.75

SUMMARY

BOLT
Grade of Bolt = A325 Bolt location from supporting beam web centre = 160 mm, 220 mm & 0 mm
Diameter of bolts = 20 mm
Number of bolts = 3 x 3

PLATE
Thickness of Fin Plate = 12 mm
Length of Fin Plate from Supporting Beam web Centre = 250 mm
Thickness of Web Reinforcement Plate = Not Required

WELD
Weld - Fin Plate to Supporting Beam Web = 6 mm