Scribd
Upload
16 views45 pages

DOM MODULE 2 Practice Problems PDF

Uploaded by

syed wahid ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views45 pages

DOM MODULE 2 Practice Problems PDF

Uploaded by

syed wahid ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 45

DOM

Module 2
Turning moment diagram
Coefficient of
fluctuation of speed
= 0.03%
Class assignment: Take crank angle = 45 degree, T = 12000 + 3000 sin 2Ѳ –
2500 cos2Ѳ, take speed = 220 rpm
Take 300 rpm,
Torque rises from 900 Nm to
4500 Nm during ½ rev,
remains constant for 1 rev,
falls to 900 Nm during next ½
rev and remains constant for
one rev.
Take radius of gyr. = 650 mm,
mass of the flywheel = 600kg
(When the resisting torque
is Constant)
The crank and connecting rod of a petrol engine, running at 1800 r.p.m.are
50 mm and 200 mm respectively. The diameter of the piston is 80 mm and the mass of the
reciprocating parts is 1 kg. At a point during the power stroke, the pressure on the piston
is 0.7 N/mm2, when it has moved 10 mm from the inner dead centre. Determine : 1. Net
load on the gudgeon pin, 2. Thrust in the connecting rod, 3. Reaction between the piston
and cylinder, and 4. The engine speed at which the above values become zero.

You might also like