Scribd
Upload
677 views1 page

Det 3050 429 - Det 3050 529 - Det 3050 479

The document provides specifications for bi-directional boosters and a det cord union made by Owen Oil Tools including base loads, temperature ratings, and recommended applications. The boosters use HMX or HNS as the base explosive and are tested at various temperatures. The det cord union is also tested at high temperatures and is recommended for wireline style transfers.

Uploaded by

Cuenta Informacion
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
677 views1 page

Det 3050 429 - Det 3050 529 - Det 3050 479

The document provides specifications for bi-directional boosters and a det cord union made by Owen Oil Tools including base loads, temperature ratings, and recommended applications. The boosters use HMX or HNS as the base explosive and are tested at various temperatures. The det cord union is also tested at high temperatures and is recommended for wireline style transfers.

Uploaded by

Cuenta Informacion
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Owen Oil Tools

Booster & Union

HMX BI-DIRECTIONAL BOOSTER


DET-3050-429 34.8mm
DET-3050-429Q (100% QC INSPECTION) 1.37in
HMX
Base Load: 10 grains HMX
Temperature: 400°F 1 hour 6.1mm 5.8mm
.24in .23in
300°F 100 hours
3/8 in.
CRIMP HERE

Recommended Application: TCP style gun transfers 80,


60, 40 grain cord.

HNS BI-DIRECTIONAL BOOSTER 34.8mm


DET-3050-529 1.37in
DET-3050-529Q (100% QC INSPECTION) HNS
Base Load: 9.6 grains HNS 6.1mm 5.8mm
Temperature: 500°F 1 hour .24in .23in
450°F 100 hours 3/8 in.
CRIMP HERE

Recommended Application: High-Temp TCP style gun


transfers 80 grain cord.

DETCORD UNION (NON-AZIDE)


DET-3050-479
Base Load: 10 Grains HMX
Temperature: 400°F/1 hour
310°F/100 hours

HNS Available: DET-3050-579


Temperature: 500°F/1 hour
450°F/100 hours

Recommended Application: Det Cord Union, Wireline


style det cord transfer.

Consult Responsibilities of Purchaser/User and Disclaimer of Warranties and Representations on page 1.0
of the Detonator section prior to each purchase, use or handling of these products. Contact Owen Oil Tools at
1-817-551-0540, or 1-800-333-6936 in the United States, for addition copies.

 Last Revised 08/2012 det-12.0 ©2007 Owen Oil Tools All rights reserved

You might also like