Scribd
Upload
93 views4 pages

Pumping System

Pumping systems account for nearly 20% of the world's electrical energy demand and 25-50% of energy usage in some industries. They have widespread uses for water distribution and industrial processes. Pumps transfer liquid from one place to another or circulate it in a system by applying pressure to overcome resistance. The total head a pump must overcome is the sum of the static head difference in elevation and the friction head from pipe resistance. Common pump types are positive displacement pumps that move a fixed volume per revolution and dynamic pumps like centrifugal pumps that use a rotating impeller to increase pressure and move fluid.

Uploaded by

Nelscy Avancena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
93 views4 pages

Pumping System

Pumping systems account for nearly 20% of the world's electrical energy demand and 25-50% of energy usage in some industries. They have widespread uses for water distribution and industrial processes. Pumps transfer liquid from one place to another or circulate it in a system by applying pressure to overcome resistance. The total head a pump must overcome is the sum of the static head difference in elevation and the friction head from pipe resistance. Common pump types are positive displacement pumps that move a fixed volume per revolution and dynamic pumps like centrifugal pumps that use a rotating impeller to increase pressure and move fluid.

Uploaded by

Nelscy Avancena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

PUMPS & PUMPING SYSTEMS

WHAT ARE PUMPING SYSTEMS?

PUMPING SYSTEMS ACCOUNT FOR NEARLY 20% OF THE WORLD’S ELECTRICAL ENERGY
DEMAND. FURTHERMORE, THEY RANGE BETWEEN 25-50% OF THE ENERGY USAGE IN
CERTAIN INDUSTRIAL PLANT OPERATIONS. THE USE OF PUMPING SYSTEMS IS
WIDESPREAD. THEY PROVIDE DOMESTIC, COMMERCIAL, AND AGRICULTURAL SERVICES. IN
ADDITION, THEY PROVIDE MUNICIPAL WATER AND WASTEWATER SERVICES, AND
INDUSTRIAL SERVICES FOR FOOD PROCESSING, CHEMICAL, PETROCHEMICAL,
PHARMACEUTICAL, AND MECHANICAL INDUSTRIES.

PUMPS HAVE TWO MAIN PURPOSES:

 TRANSFER OF LIQUID FROM ONE PLACE TO ANOTHER PLACE (E.G. WATER FROM AN
UNDERGROUND AQUIFER INTO A WATER STORAGE TANK)
 CIRCULATE LIQUID AROUND A SYSTEM (E.G. COOLING WATER OR LUBRICANTS THROUGH
MACHINES AND EQUIPMENT)
PUMPING SYSTEM CHARACTERISTICS
THE PRESSURE IS NEEDED TO PUMP THE LIQUID THROUGH THE SYSTEM AT A CERTAIN RATE. THIS
PRESSURE HAS TO BE HIGH ENOUGH TO OVERCOME THE RESISTANCE OF THE SYSTEM, WHICH IS
ALSO CALLED “HEAD”. THE TOTAL HEAD IS THE SUM OF THE STATIC HEAD AND FRICTION HEAD.

STATIC HEAD
STATIC HEAD IS THE DIFFERENCE IN HEIGHT BETWEEN THE SOURCE AND DESTINATION OF THE
PUMPED LIQUID
THE STATIC HEAD CONSISTS OF:

 STATIC SUCTION HEAD (HS): RESULTING FROM LIFTING THE LIQUID RELATIVE TO THE
PUMP CENTERLINE. THE HS IS POSITIVE IF THE LIQUID LEVEL IS ABOVE PUMP CENTERLINE,
AND NEGATIVE IF THE LIQUID LEVEL IS BELOW PUMP CENTERLINE (ALSO CALLED
“SUCTION LIFT)
 STATIC DISCHARGE HEAD (HD): THE VERTICAL DISTANCE BETWEEN THE PUMP CENTERLINE
AND THE SURFACE OF THE LIQUID IN THE DESTINATION TANK

FRICTION HEAD
 THIS IS THE LOSS NEEDED TO OVERCOME THAT IS CAUSED BY THE RESISTANCE TO FLOW
IN THE PIPE AND FITTINGS.
 IT IS DEPENDENT ON SIZE, CONDITION AND TYPE OF PIPE, NUMBER AND TYPE OF PIPE
FITTINGS, FLOW RATE, AND NATURE OF THE LIQUID.

TYPE OF PUMPS

1. POSITIVE DISPLACEMENT PUMPS - IN ALL POSITIVE DISPLACEMENT TYPE PUMPS, A FIXED


QUANTITY OF LIQUID IS PUMPED AFTER EACH REVOLUTION. SO IF THE DELIVERY PIPE IS
BLOCKED, THE PRESSURE RISES TO A VERY HIGH VALUE, WHICH CAN DAMAGE THE PUMP.
POSITIVE DISPLACEMENT PUMPS ARE WIDELY USED FOR PUMPING FLUIDS OTHER THAN WATER,
MOSTLY VISCOUS FLUIDS.
 RECIPROCATING PUMP IF THE DISPLACEMENT IS BY RECIPROCATION OF A PISTON
PLUNGER.
 ROTARY PUMPS IF THE DISPLACEMENT IS BY ROTARY ACTION OF A GEAR, CAM OR VANES
IN A CHAMBER OF THE DIAPHRAGM IN A FIXED CASING.

2. DYNAMIC PUMPS - ARE ALSO CHARACTERIZED BY THEIR MODE OF OPERATION: A ROTATING


IMPELLER CONVERTS KINETIC ENERGY INTO PRESSURE OR VELOCITY THAT IS NEEDED TO PUMP
THE FLUID.

 CENTRIFUGAL PUMPS ARE THE MOST COMMON PUMPS USED FOR PUMPING WATER IN
INDUSTRIAL APPLICATIONS. TYPICALLY, MORE THAN 75% OF THE PUMPS INSTALLED IN AN
INDUSTRY ARE CENTRIFUGAL PUMPS.
 SPECIAL EFFECT PUMPS ARE PARTICULARLY USED FOR SPECIALIZED CONDITIONS AT AN
INDUSTRIAL SITE.

You might also like