Material Specifications MAT0103
PAINT MATERIAL AND FINISHED PART PERFORMANCE REQUIREMENTS
1. SCOPE 1.2 Finish system performance requirements
are provided in Table 4 for both paint materials
1.1 This specification covers specific and finished painted parts. Only certain thermal
performance requirements for paint materials or chemical cure primers, topcoats, or powder
used on CNH products. Paint performance is material systems can achieve Class 3, 4 and 5
specified for CNH products based on durability performance levels.
and appearance requirements. Paint materials
supplied to this specification shall also comply 1.3 Primer performance requirements are
with all sections of the CNH MAT0101, provided for both primer materials and primed
86628042, General Paint Requirements and only parts. Properties listed in Table 5 apply
Color Control Specification. Additional when only primer materials and primed only
requirements unique to certain paint materials or parts are specified.
colors are specified in individual material
specifications CNH MAT0110 to MAT0499. 1.4 Table 1 provides a basic cross-reference
Approved paint materials for use on CNH between new CNH paint performance Classes
product and parts are shown in CNH and comparable prior company material
MAT0101Q, 86628043 Approved Paint Material specifications and performance level
list. designations.
Table 1 Former Company Paint Performance Designations
CNH MAT0103
New Holland and Case
Performance Class
Former Designations
and Part Number
Complete Finish Systems
- NH Penna, Standard Perf., FNHA-2-J-061.00 (86509537)
Class 1 (86628056)
- Case, Standard Perf. MS-1
Class 2 (86628055) - NH Tractor, NHT MS 002, Classes C and D
- NH Penna, Premium Perf., FNHA-2-J-062.01 (86570426)
Class 3 (86628054) - Case, Superior Perf., MS-1
- NH Tractor, NHT MS 002, Class B4
Class 4 (86628053) - NH Tractor, NHT MS 002, Class B1, B2 and B3
Class 5 (86628052) - NH Tractor, NHT MS 002, Class A
Primer and Primed Only Parts
- NH Penna, Standard Primer Perf., FNHA-2-J-065.00 (86514388)
Class 1P (86628059)
- Case, Standard Primer Perf., MS-1
- NH Penna, Premium Primer Perf., FNHA-2-J-066.00 (86565256)
Class 2P (86628058) Case, Superior Primer Perf., MS-1
- NH Tractor, NHT MS 002, Class B4, C and D
Class 3P (86628057) - NH Tractor, NHT MS 002 Class A1, A2, A3, B2 and B3
ISSUED BY ECN NO. NAME
GER 28SEP05 35015118 SPEC PAINT MATERIAL PERFORMANCE
APPROVED BY REV. PAGE CNH NUMBER
JTS 28SEP05 F 1 OF 6 86628044
THE INFORMATION HEREON IS THE CONFIDENTIAL AND PROPRIETARY PROPERTY OF CNH GLOBAL N.V. AND/OR
ITS SUBSIDIARIES OR DIVISIONS. ANY USE, EXCEPT THAT FOR WHICH IT MAY BE LOANED, IS PROHIBITED.
Material Specifications MAT0103
1.5 This specification may involve hazardous 3. RELATED STANDARDS
materials, apparatus, and procedures. This
specification does not claim to address all of the CNH DWGA110 (86641291) Requirements for
safety, health, and environmental issues Painted Parts
associated with its use, application, or removal. CNH MAT0101, 86628042 CNH General Paint
Specification users bear responsibility for Requirements and Color Control
consulting appropriate safety, health, and CNH MAT0101Q, 86628043 Approved Paint
environmental practices, and determining the Material Listing
applicability of regulatory limitations prior to use, CNH MAT0110 – 0499: Individual Paint Material
application, or subsequent removal of paints or Color Specifications
supplied to this specification. Consult with CNH MTM0102, 86628045 Test Panel
facility safety, health, and environmental Preparation
professionals or contact CNH Corporate CNH MTM0104, 86628046 Recoatability
Environmental Health and Safety if guidance in CNH MTM0106, 86628047 Cyclical Corrosion
this area is needed. CNH MTM0108, 86628048 Chemical
Resistance
2. DESIGNATION ON DRAWINGS AND Designated ASTM Test Methods
PURCHASE ORDERS
4. REQUIREMENTS
2.1 Paint performance Class, color
designation, and corresponding part numbers 4.1 DRY FILM PROPERTIES
must be specified on the Engineering drawing.
Class 1 paint performance requirements apply 4.1.1 Paint Materials over Test Panels
for finish systems and Class 1P primer
performance requirements apply for primers or Paint materials supplied to this specification
primed only parts unless another performance shall meet cured, dry film material property
Class is specified. requirements established by this specification.
Paint materials shall be applied on Bonderite
Figure 1 provides an example of how the color 1000 with chrome seal test panels per CNH
and performance Class can be specified on the MTM0102, 86628045 Test Panel Preparation.
engineering drawing.
4.1.2 Finished Painted Parts
Figure 1
86628054 Class 3 PAINT PERF. STD 86628044 4.1.2.1 All parts supplied to this specification
86609757 CASE RED STD 86628042 shall meet all finish painted part requirements of
878xxxxx BASE PART NAME the specified performance Class. Testing for
approval shall be conducted on panels made
2.2 Additional details related to specifying from production substrates and processed
paint on Engineering drawings are provided in through all steps of the same finishing sequence
standard DWGA110 (86641291). to be used on production parts. Whenever
possible testing shall be conducted on actual
parts where part geometry or configuration
provides enough surface area for testing.
NAME REV. PAGE CNH NUMBER
SPEC PAINT MATERIAL PERFORMANCE F 2 OF 6 86628044
Material Specifications MAT0103
4.1.2.2 All parts should be painted prior to 4.1.4.2 Paint material incompatibility may occur
assembly whenever possible. Uniform film build due to the mixing of certain primer and finish
that meets the recommended minimums shall be system performance classes or technologies.
achieved on all surfaces, including edges and Contact Materials or the applicable paint
recesses. Parts shall be primed and/or supplier for information on specific applications.
topcoated only with materials that have been
approved by CNH Materials Technology. 4.1.5 Performance Class Application
Finished parts shall be cured per the specified
schedule prior to exposure to any detrimental In general, the following paint technologies are
environment. capable of meeting complete finish system
performance Class requirements as indicated in
4.1.3 Primer Paint Materials Table 3. This does not mean that all paint
material technologies listed will meet the CNH
Primer paint materials supplied to this performance Class requirements. Before use
specification shall meet dry film material specific formulations being considered for CNH
property requirements listed in Table 5 for the product applications must be approved.
appropriate Primer Class specified. Primer
requirements are the same regardless of Table 3 Performance Class Applications
whether a primed only part is subsequently Typical Paint Complete Finish System
Material Technology Performance Class
topcoated and must also comply with Alkyd Enamel 1
requirements of a finish system performance Acrylic, urethane, powder 3, 2
Class. Testing for approval of primer materials Acrylic, urethane, powder 5, 4
shall follow methods and procedures specified
for material on test panels or finish painted parts
as specified in Sections 4.1.1 and 4.1.2.
4.1.4 Primer and Topcoat Compatibility
4.1.4.1 Primer performance and the
corresponding paint technology will affect the
overall performance of the complete finish
system. Typically, primer performance Classes
will support complete finish systems as shown in
Table 2.
Table 2 Typical Performance Class Compatibility
Primer Complete Finish System
Performance Technology
Performance Class
Class Example
1P Alkyd 4, 3, 2, 1
2P Urethane, 5, 4, 3, 2, 1
Epoxy, Niso
3P Epoxy 5, 4, 3, 2, 1
NAME REV. PAGE CNH NUMBER
SPEC PAINT MATERIAL PERFORMANCE F 3 OF 6 86628044
Material Specifications MAT0103
4.1.6 Complete Finish System Requirements
Table 4 Paint Material and Painted Part Performance Requirements
Performance Class and Class 5 Class 4 Class 3 Class 2 Class 1
Part Number (86628052) (86628053) (86628054) (86628055) (86628056)
Properties Paint Painted Paint Painted Paint Painted Paint Painted Paint Painted
Material Part Material Part Material Part Material Part Material Part Test Method
Color – Visual Visual Match to Color Standard ASTM D1729
Paint Material (StandardTest Panels) Finished Painted Parts (Parts/Process Panels) ASTM E308
Color Tolerance, maximum ∆L* = 0.3, ∆A* = 0.3, ∆B* = 0.3, ∆L* = 0.6, ∆A* = 0.6, ∆B* = 0.6, CIE LAB Spherical
∆E* = 0.5 ∆E* = 1.0 D65/10° included
Persoz = 250 Persoz = 150 Persoz = 100 ASTM D4366
Hardness, Full cure, minimum Method B
Pencil = 2H Pencil = H Pencil = B ASTM D3363
Impact Resistance, 40 kg cm 30 kg cm 20 kg cm ASTM D2794
Forward, minimum
CNH MTM0106
Cyclical Corrosion 5 Cycles 5 Cycles 4 Cycles ASTM D1654,
Rating 9 min. Rating 6 min. Rating 6 min. Procedure A
Method 2
600 Hours Gloss Retention Gloss Retention
Accelerated Weatherometer, 60° = 90% minimum 60° = 65% minimum ASTM G155
Weathering 12 Months 20° = 65% minimum 20° = 45% minimum Cycle 7
Florida Exposure ∆E* = 3.0 change, max. ∆E* = 4.0 change, max. (Weatherometer)
And 1200 Hours Gloss Retention
Weatherometer, 60° = 75% minimum N/A N/A ASTM D1014
South Florida 24 Months (Florida Exposure)
20° = 45% minimum
Exposure Florida Exposure ∆E* = 5.0 change, max.
Salt Spray Resistance Scribed Scribed Scribed Scribed Scribed Scribed Scribed Scribed Scribed Scribed ASTM B117
Complete Finish System 1000 hrs 1000 hrs 700 hrs 700 hrs 700 hrs 500 hrs 500 hrs 350 hrs 400 hrs 200 hrs ASTM D1654,
Minimum requirements Rating 7 Rating 7 Rating 6 Rating 6 Rating 6 Rating 6 Rating 6 Rating 6 Rating 6 Rating 6 Procedure A
Method 2
600 hours, minimum, 400 hours, minimum 200 hours, minimum,
10 minute recovery 1 hour recovery ASTM D1735
Humidity Gloss Retention Gloss Retention ASTM D523
Complete Finish System 60° = 95% min. 60° = 90% min. ASTM D1729
20° = 95% min. 20° = 90% min. ASTM D714
No visual color change No visual color change
∆E* =0.5 change, max ∆E* =0.5 change, max
Blisters: 8 (min.) and Few (max.) Blisters: 8 (min.) and Few (max.)
NAME REV. PAGE CNH NUMBER
SPEC PAINT MATERIAL PERFORMANCE F 4 OF 6 86628044
Material Specifications MAT0103
4.1.6 Complete Finish System Requirements (Continued)
Table 4, Page 2 Paint Material and Painted Part Performance Requirements
Performance Class and Class 5 Class 4 Class 3 Class 2 Class 1
Part Number (86628052) (86628053) (86628054) (86628055) (86628056)
Properties Paint Painted Paint Painted Paint Painted Paint Painted Paint Painted
Material Part Material Part Material Part Material Part Material Part Test Method
500 hr. at 400 hr. at 500 hr. at 400 hr. at 300 hr. at 200 hr. at 200 hr. at 100 hr. at 200 hr. at 100 hr. at
Water Immersion 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C ASTM D870
Gloss Retention Gloss Retention
Complete Finish System 60° = 95% min 60° = 90% min ASTM D523
20° = 95% min 20° = 90% min ASTM D1729
No visual color change No visual color change ASTM D714
∆E* =0.5 change, max ∆E* =0.5 change, max ASTM D3359
No Recovery 1 Hour Recovery ASTM D4366
No Rust No Rust
Blisters: 8 (min) and few (max) Blisters: 8 (min) and Few (max)
Adhesion: 4B min Adhesion: 4B min
Hardness: 15% change, max Hardness: 15% change, max
Gasoline = 1.0 hour Motor Oil = 24 hours CNH MTM0108
Chemical Resistance Diesel Fuel = 1.0 hour Diesel Engine Oil =24 hrs
Antifreeze (50:50) = 6 hours Pesticide / Herbicide = TBD
Exposure Time, minimum Grease = 24 hours
Adhesion, minimum Classification 4B (1.5 mm scribe spacing) ASTM D3359
Recoatability No visual defects CNH MTM0104,
4B min. adhesion. ASTM D3359
Flexibility Maximum elongation, No cracks or adhesion loss Maximum elongation ASTM D522
beyond 5 mm from Mandrel end No Cracks or adhesion loss Method A
Chip Resistance, minimum 5B 4B ASTM D3170
Lead Content, 0.06 ASTM D3335
Wt.%, maximum
Chromium Content, 0.01 ASTM D3718
Wt.%, maximum
--
NAME REV. PAGE CNH NUMBER
SPEC PAINT MATERIAL PERFORMANCE F 5 OF 6 86628044
Material Specifications MAT0103
4.1.7 Primer and Primed Only Part Requirements
Table 5 Primer Materials and Primed Only Part Performance Requirements
Performance Class and Class 3P Class 2P Class 1P
Part Number (86628057) (86628058) (86628059)
Properties Paint Painted Paint Painted Paint Painted
Material Part Material Part Material Part Test Method
Color – Visual Visual Match to Color Standard ASTM D1729
Persoz = 200 Persoz = 100 Persoz = 100 ASTM D4366
Hardness, Full cure, minimum Method B
Pencil = H Pencil = F Pencil = B ASTM D3363
Adhesion, minimum Classification 4B ASTM D3359
Recoatability No visual defects CNH MTM0104
4B min. adhesion ASTM D3359
Flexibility No cracks or adhesion Maximum elongation ASTM D522
loss beyond 5 mm No Cracks Method A
from Mandrel end or adhesion loss
Chipping Resistance, minimum 5B 4B ASTM D3170
Impact Resistance, 30 kg cm 20 kg cm 20 kg cm ASTM D2794
Forward, minimum
Salt Spray Resistance Scribed Scribed Scribed Scribed Scribed Scribed ASTM B117
Minimum requirements 800 hrs 700 hrs 400 hrs 300 hrs 150 hrs 100 hrs ASTM D1654,
Rating 7 Rating 7 Rating 6 Rating 6 Rating 6 Rating 6 Procedure A
Method 2
400 hours, minimum, 200 hours, minimum, 100 hours, minimum, ASTM D1735
Humidity 10 minute recovery 1 hour recovery ASTM D523
Blisters: 8 (min.) and Few (max.) Blisters: 8 (min.) ASTM D1729
And Few (max.) ASTM D714
500 hr. at 400 hr. at 300 hr. at 200 hr. at 150 hr. at 100 hr. at
25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C 25 ± 2°C ASTM D870
Water Immersion 1 Hour Recovery
No Recovery No Rust ASTM D523
No Rust Blisters: 8 (min) and ASTM D1729
Blisters: 8 (min) and few (max) Few (max) ASTM D714
Adhesion: 4B min Adhesion: 4B min ASTM D3359
Hardness: 15% change, max Hardness: ASTM D4366
15% change, max
Lead content, 0.06 ASTM D3335
Wt%, maximum
Chromium content, 0.01 ASTM D3718
Wt%, maximum
NAME REV. PAGE CNH NUMBER
SPEC PAINT MATERIAL PERFORMANCE F 6 OF 6 86628044
