0% found this document useful (0 votes)
121 views2 pages

Transmisor Presión IFM PT3551

The PT3551 is an electronic pressure sensor for mobile applications that complies with e1 standards. It has a measuring range of 0-250 bar, outputs an analog 4-20 mA signal, and has an operating voltage range of 8.5-32V DC. The sensor has high accuracy and reliability with a long-term stability of <±0.1%, an operating temperature range of -25°C to 90°C, and protection ratings of IP67 and IP69K.

Uploaded by

Fredy Noalca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
121 views2 pages

Transmisor Presión IFM PT3551

The PT3551 is an electronic pressure sensor for mobile applications that complies with e1 standards. It has a measuring range of 0-250 bar, outputs an analog 4-20 mA signal, and has an operating voltage range of 8.5-32V DC. The sensor has high accuracy and reliability with a long-term stability of <±0.1%, an operating temperature range of -25°C to 90°C, and protection ratings of IP67 and IP69K.

Uploaded by

Fredy Noalca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PT3551 Page 1 of 2

Pressure sensors

PT3551
Electronic pressure sensor
PT35

Process connection G¼ A

for mobile applications


e1 compliant

Analog output

Measuring range
0...250 bar

Type of pressure: relative pressure


Application
Liquids and gases
Electrical design DC
Output 4...20 mA analog

Operating voltage [V] 8.5...32 DC


Reverse polarity protection yes
Analog output 4...20 mA
Load for analog output [ohms] max. (Ub - 8.5 V) x 50; 775 bei Ub = 24V
Pressure rating [bar] 400
Bursting pressure min. [bar] 1000
Accuracy / deviations
(in % of the span)
Characteristics deviation *) < ± 1.0
Linearity < ± 0.25 (BFSL) / < ± 0.5 (LS)
Hysteresis < ± 0.2
Repeatability **) < ± 0.1
Long-term stability ***) < ± 0.1
Temperature coefficients (TEMPCO) in the
temperature range -25...90° C (in % of the
span per 10 K)
Greatest TEMPCO of the zero point < ± 0.4
Greatest TEMPCO of the span < ± 0.2
ifm efector, inc. 782 Springdale Drive, Exton, PA 19341 — We reserve the right to make technical alterations without prior notice. — US — PT3551 — 21.01.2009

http://www.ifm-electronic.co.uk/products/us/ds/PT3551.htm 28/10/2009
PT3551 Page 2 of 2

PT3551
Step response time analogue output [ms] 8
Ambient temperature [°C] -25...90 ****)
Medium temperature [°C] -25...90 ****)
Storage temperature [°C] -25...90 ****)
Protection IP 67 / IP 69K, III
Insulation resistance [MΩ] > 100 (80 V DC)
Shock resistance DIN IEC 68-2-27:50 g (11 ms)
Vibration resistance DIN IEC 68-2-6:20 g (10...2000 Hz)
Min. pressure cycles 50 million
EMC EN 61000-4-2 ESD: 4 kV CD / 8 kV AD
according to the automotive directive 95/54/EC 04/104EC /
noise immunity
05/83EC
ISO 11452-2 100 V/m (400...2000 MHz)
ISO 11452-4 100 mA (1...400 MHz) / severity level 4
ISO 7637-2 severity level 3 (severity level 4 upon request)
radiation of
according to CISPR 25
interference
EN 61000-6-1
EN 61000-6-4
Housing materials stainless steel 316L / 1.4404; TROGAMID
Materials (wetted parts) stainless steel 316L / 1.4404; sealing: FPM (Viton)
Connection M12 connector
Remarks *) incl. drift due to tightening torque, zero and span error
**) with temperature fluctuations < 10 K
***) in% of the span / 6 months
****) -40...100°C upon request
e1 approval on request
BFSL = Best Fit Straight Line / LS = Limit Value Setting
Wiring

ifm efector, inc. 782 Springdale Drive, Exton, PA 19341 — We reserve the right to make technical alterations without prior notice. — US — PT3551 — 21.01.2009

http://www.ifm-electronic.co.uk/products/us/ds/PT3551.htm 28/10/2009

You might also like