Scribd
Upload
279 views1 page

Eci Grayconm I1 Fogra39

The document provides color calibration instructions for printing a gray control strip using CMYK inks at varying percentages to achieve a balanced gray scale from light to dark. It specifies starting and stopping the print, lists the ink percentage combinations to use for each gray patch, and identifies the gray balance target as FOGRA39 for offset printing on coated paper according to ISO 12647-2 standards.

Uploaded by

migueldemacrolab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
279 views1 page

Eci Grayconm I1 Fogra39

The document provides color calibration instructions for printing a gray control strip using CMYK inks at varying percentages to achieve a balanced gray scale from light to dark. It specifies starting and stopping the print, lists the ink percentage combinations to use for each gray patch, and identifies the gray balance target as FOGRA39 for offset printing on coated paper according to ISO 12647-2 standards.

Uploaded by

migueldemacrolab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

cmy 70

k 70 cmy 50 k 50 cmy 30 k 30 Stop cmy 70 Paper k 70 my cmy 50 cm k 50 cy cmy 30 cmy k 30 100 20 80 40 60 60 40 80 20 100 100 20 80 40 60 60 40 80 20 100 < Start

FOGRA39
GrayCon M i1 • v1
ECI/bvdm
ECI/bvdm Gray Control Strip (M i1) • FOGRA39 • ISO 12647-2 gray balance condition ‘CIELAB black ink’ • Offset on gloss or matt coated paper (PT 1+2) • ISO 12647-2:2004/Amd 1 • Reference FOGRA39.txt (www.fogra.org) • www.eci.org, www.bvdm.org

You might also like