Scribd
Upload
81 views3 pages

Thermostat Removal & Installation Guide

The document provides instructions for removing and installing a thermostat on a Land Rover vehicle. It lists 9 steps for removal, which include draining the cooling system, disconnecting various coolant hoses from the thermostat by releasing clips, and removing the thermostat. It then lists 7 steps for installation, which involve connecting the various coolant hoses back to the thermostat and securing them with clips, refilling and bleeding the cooling system.

Uploaded by

Amakaf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views3 pages

Thermostat Removal & Installation Guide

The document provides instructions for removing and installing a thermostat on a Land Rover vehicle. It lists 9 steps for removal, which include draining the cooling system, disconnecting various coolant hoses from the thermostat by releasing clips, and removing the thermostat. It then lists 7 steps for installation, which involve connecting the various coolant hoses back to the thermostat and securing them with clips, refilling and bleeding the cooling system.

Uploaded by

Amakaf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

14/06/2010 http://www.landrovertechinfo.

com/ex…

Published: Jan 8, 2007

Thermostat (26.45.01)
Removal
1 . Drain the cooling system.

2 . Position a container to collect the fluid spillage.

3 . Disconnect the radiator upper hose from the thermostat.


Release the clip.

4 . Disconnect the heater hose from the thermostat.


Release from the clip.

5 . Disconnect the engine inlet hose from the thermostat.


Release the clip.

6 . Disconnect the radiator lower hose from the thermostat.


Release the clip.

landrovertechinfo.com/…/frmviewit.js… 1/3
14/06/2010 http://www.landrovertechinfo.com/ex…

7 . Disconnect the coolant expansion tank hose from the thermostat.


Release the clip.

8 . Remove the thermostat.


Disconnect the coolant hose from the thermostat.

9 . Remove the container.

Installation
1 . Install the thermostat.
Connect the coolant hose to the thermostat.

Secure with the clip.

2 . Connect the coolant expansion tank hose to the thermostat.


Secure with the clip.

3 . Connect the radiator lower hose to the thermostat.


Secure with the clip.

landrovertechinfo.com/…/frmviewit.js… 2/3
14/06/2010 http://www.landrovertechinfo.com/ex…
4 . Connect the engine inlet hose to the thermostat.
Secure with the clip.

5 . Connect the heater hose to the thermostat.


Secure with the clip.

6 . Connect the radiator upper hose to the thermostat.


Secure with the clip.

Position the radiator upper hose to the cooling fan shroud.

7 . Refill and bleed the cooling system.

landrovertechinfo.com/…/frmviewit.js… 3/3

You might also like