Specification of Earbuds Sketch charging compartment;(Pick up the two earbuds and put them How to operate：

Warming remain
back on the cover. The charging compartment indicator lights

Bluetooth
Battery Turn on: Press and hold the touch multi-function button for 3
① Product Name: F9 up to indicate that there is power. If it does not light, it means
Level Indictor For the first time to use the earbuds or for a long time to no use, seconds or take it out from the charging case, the earbuds will be
USB Port no power.)
② Bluetooth Version: Version 5.0 please charge the charging case and earphones before, Please turned on automatically

Earbuds User Manual

Multifunction ② Take the two earbuds out of the charging case and wear them
③ Protocol: Supports HFP 1.7, HSP 1.2, Touch Button Battery keep it in an unobstructed and effective environment within 10 Turn off: Press and hold the touch multi-function button for 5
Level Indictor on the left and right ears respectively. The earphones will
AVRCP 1.6, SPP 1.2 and PBAP 1.0 Earbud meters. Otherwise, it may be stuck and disconnected. seconds (Led light turn red and stay) to shut down, or directly put
Earbud automatically turn on and automatically pair;(Voice prompt:
④ Chipset: BT8812E LED Indictor the earbuds back into the charging case, the earbuds automatically
LED Indictor power on, left channel, right channel, waiting for connection).

F9
⑤ Working distance: 10M Battery turns red and automatically turns off.
③ Turn on the phone Bluetooth and click on the connection pair
Level Display Indicator description: Answer and hang up: When phone coming,short press the touch
⑥ Call Time: 5-6H (1 time full charged) name "F9" to connect (voice prompt "Connected").
button one time,answer the phone, short press the touch button
⑦ Play Music Time: 5-6H (1 time full charged) ① Charge the earbuds: Put the earbuds into the charging case
one time when call end
⑧ Standby time:650H (With charger case) and cover it to charge.
Reject the phone：Press the touch button for 3s,reject the phone
How to pairing earbuds indicator: Lights up red when charging, and red light
⑨ Frequency:2402MHz~2480MHz Start Siri: Long press Right earbud or Left earbud for 1s you will
Fitting when fully charged. The charging case flashes green and the
⑩ Battery type: 3.7V, >50mA Li Battery hear “DU”, release andphone voice ontrol is started. Siri
light is off after charging.
11 Charging Time: 1-2H Setting Setting Setting Bluetooth Setting Bluetooth supported only
② Charge the charging case: Plug the 5V/1A USB into the
12 Working Temperature: -10°-55° NEXT/PREV Songs: Double click on the Right earbud(R), it plays
charging port to charge. During charging, the middle digit of
next song, double click on the L earbud, it plays previous song
Bluetooth Turn off Bluetooth Turn off Bluetooth Bluetooth
the charging stand display indicates the charging case power.
Specification of charger case: Bluetooth Name Bluetooth Name When the number is displayed as “100”, the battery is fully
F9 Disconnectted F9 Connectted
① Input current: 5V 1A charged.
Charging case indicator light: The charging flashes green light, Track Forward Track Backward
② Output current: 5V 1A
Others Others and the light is off after charging.
③ Battery type: 3.7V The earcap heads down X7
L for Left R for Right ③ Charge to the mobile phone; 3 Charge the mobile phone: Click Click
④ Charging time:1-2H Smaller heads up Earbud (R) headphone (L)
Connect USB Cable to USB port of case to charge the mobile Twice Twice
Adjust to the best fit
phone.ChargingCase indicator light : Light will turn green when
Enter into Select Turn on bluetooth Bluetooth charging and turn off when fully charged
How to operate the earbuds: the Settings Bluetooth in in your device Paired
your device settings Select
① Make sure that the charging case has electricity. If the
"F9 " in your device's
charging compartment is out of power, please fully charge the bluetooth settings to connect

Volume +/-: Constinuous press right earbud 3 times to turn up Repeated use: the earbuds has been connected with the mobile ⑤ Do not let the Bluetooth earbuds be close to the fire source. Commodity warranty card (warranty details) Warranty Card FAQ and Solutions
the volume; continuous press left earbud 3 times to turn down phone--- open the phone Bluetooth, and take out thetwo earbuds ⑥ Do not drop, bump, scratch, twist, tap, crush, or put into the water. 1、From the date of purchase to the warranty period of three
⑦ Keep away from magnets, appliances and speakers when Warranty certificate, please fill in and keep it safely
the volume, or you can adjust the volume on the phone directly. from the charging case, without any operation, it will connect with months, if the machine fails, the technician will confirm that the Phenomenon Failure Reason Solution
the phone automatically . If you use a different phone, you need using Bluetooth earbuds. fault is under normal use, and free repair and spare parts Can not turn on / Charge the earbuds
to follow the steps in the instructions for use. ⑧ Do not place the Bluetooth earbuds in extreme temperature replacement service will be provided. Turn off automaticly Low battery
for 2-5H
ProductName
(use ambient operating temperature range -10°C-55°C) 2、The company will refuse to provide warranty service in the
Volume - No hint after paired Not paired correctly Re-paired
Volume + ⑨ Do not expose the Bluetooth earbuds to moisture.
Special Note:The two earbuds are well paired before packaged, following circumstances; Can talk but Red light is on
but if they can not paired well due to some wrong operations, pls.
⑩ If you do not use the Bluetooth earbuds for a long time, a、The product has been mishandled, negligently used or Sales date
red light is on for lower battery
Charge for the earbuds
Click 3 Click 3 headphone (L) please charge it fully and charge it once a week to extend the life
times Earbud (R) times do as following steps to re-pair the earbuds. Power off the two accidentally caused by natural disasters and man-made disasters. No lights on No output Check the power
of the Bluetooth earbuds. b、The product is repaired and modified by non-technical when charging from power supply supply ifconnected weill
earbuds, then press the button of the two earbuds at same time Shop
and do not release for about 10s, blue lights sparkled ----> red personnel of the company. Too large volume or too Turn down the volume or
Echo
and blue lights sparkled alternatively ---> release --->two c、The product body number has been converted, altered or noisy environmental change the environmental
Safety guidance: After sale service
earbuds are in the situation of paired, and they are ready for removed. There is noise Environmental disturbance
Change the environment
d、 The product does not provide installation instructions or move to place near
phone searching. ① please use the standard 5V charger (4.9-5.5V) when talking or too far away from device
the device
Single Earbud Mode：When the main earbud (R) and the secondary according to the original factory.
② Do not place the charging case and the Bluetooth earbuds Not wear Adjust the
earbud (L) are not connected, taking out one of any of the earbuds 3、Third, the free service provided by this warranty card does Low voice
Note: This operation also clears the team record between the next to the flammable explosives. earbuds correctly position of earbuds
separately from the charging case. The earbud prompts “turn on”, not include product accessories, and other decorations and other
phone and the earbuds, so you need to delete the Bluetooth ③ Do not disassemble the charging case and Bluetooth earbuds, Can not hear The phone Need a phone
then for 3 seconds, the blue light flashes---the red and blue lights flash items. Packing details: the music doesn’t support support BT stereo
pairing record before the phone and then search for the or insert other items into the product to avoid damage to the
alternately, open the mobile phone Bluetooth function, search for the 4、The Company will not be liable for any direct or indirect loss
connection again. product or even cause harm to you.
Bluetooth device and Click Connect, the “Bluetooth Connected ” will of equipment damage. Item Name Quantity
be displayed in the upper right corner of the phone screen, and the 5、The contents of this warranty card are subject to change
Bluetooth earbuds 2 pcs
earbud will prompt “Connected”, or the manual operation of a single without prior notice.
Serious warning:
earbud will repeat the above operation. Care and maintenance: Charger case 1 pcs
Do not use this product while charging. Please use the adapter
① To avoid any mis-operation caused by collision put the earbud specified by the manufacturer to charge the product. Do not User manual 1 pcs
in charging case before put in your pocket disassemble the built-in lithium battery. Do not let the metal
Remark: Single use ② Do not use a abrasive cleaner to clean the Bluetooth earbuds. Certification 1 pcs
contact or short the electrode. Do not touch or squeeze the
③ Do not expose the Bluetooth earbuds to excessive temperature. battery to avoid Place in a humid or hot (>60 ° C) environment. Eartips 3 sizes(Big,Medium,small)
Main earbuds(R) Bluetooth name: F9
④ Do not expose the earbud under the blazing sun for a long
secondary earbud (L) Bluetooth name: F9 L 1 pcs
time Use charger line
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. in portable exposure
condition without restriction.