H01 Panel
Uploaded by
NAGARAJH01 Panel
Uploaded by
NAGARAJEnergy Management - Medium Voltage & Systems Circuit diagram
Operating Voltage 33kV
REFERENCE DRAWINGS
DRAWING TITLE DRAWING NO.
Rated Voltage 36kV MV GENERAL SINGLE LINE DIAGRAM M3-TSY-EDR-POSML-PWD-D30-0021500
Rated Frequency 60 Hz
Rated Lightning Impulse withstand voltage 170kV
Rated power frequency withstand voltage 70kV
Rated short-time withstand current (3s) 25kA
Rated short-circuit breaking current 25kA
Rated short-circuit making current 65kA MFG DRAWING NO. (3)2-RMPP-6H2-UH011-*
FAB BY DATE 19.01.20
Rated current busbar acc. to IEC 1250A
Auxiliary supply for local control 110Vdc
0 05.03.17 GN IFC-AD
Auxiliary supply for remote control 110Vdc
1 04.10.17 GN As Manufactured
Auxiliary supply for operating mechanism 110Vdc * 19.01.20 GN Retrofitting
Auxiliary supply for cubicle heating (L/N) 230Vac REV. DATE BY DESCRIPTION CHKD. CERT. APPD.
NO.
Auxiliary supply for cubicle lighting (L/N) 230Vac DRAWING COMPLETION CERTIFICATE (DCC)
CLIENT:
Average ambient temperature for rated values 40°C
PROJECT:
IP Protection, Primary part IP 65 CONTRACTOR:
IP Protection, LV Compartment IP 4X
DRAWN BY GN CHECKED BY HEB SCALE: NTS
SWITCHGEAR COLOUR RAL 7033
DATE STARTED 05.03.17 DATE COMPLETED
OPR'G. DEPT. ENG. DEPT.
FACTORY
THIS DRAWING IS NOT TO BE USED FOR APPROVAL/CERTIFICATION INFORMATION
AS-BUILT CONSTRUCTION OR FOR ORDERING
MATERIAL UNTIL CERTIFIED AND DATED DOC. NO. REV. NO.
8DA10 33kV GIS SWITCHGEAR, =H01+H01
Typical =HZ01
Documentation identifier A / =H01 / / 1 PP INCOMING FEEDER CUBICLE
RIYADH METRO PP6H2
RIYADH SAUDI ARABIA
CONTRACT NO. JOB ORDER NO. INDEX PLANT NO. DRAWING NUMBER: SHEET NO: REV. NO.
1
Project: 909611 P OF
1 *
Archive: =H01 / A / / / 1
1 2 3 4 5 6 7 8
Manufacturer document number
FBINH2
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / A / A / 1
Designation Sheet Sheets Date Description Prepared by
Customer document number
A =H01 /1 (3)2-RMPP-6H2-UH011-* 1- 1 19.01.20 8DA10 33kV GIS SWITCHGEAR, =H01+H01 EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
Cover sheet
A =H01 A1 (3)2-RMPP-6H2-LH012-* 1+ 6 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
List of documents
A =H01 A2 (3)2-RMPP-6H2-LH012-* 2+ 6 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file C: C_FB_EN.etr, 04-11-24
+H01 PP INCOMING FEEDER CUBICLE
List of documents
B B
Translate file A: A_COC_DE
A =H01 A3 (3)2-RMPP-6H2-LH012-* 3+ 6 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file D: leer2
Translate file B: leer1
+H01 PP INCOMING FEEDER CUBICLE
List of documents
A =H01 A4 (3)2-RMPP-6H2-LH012-* 4+ 6 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
List of documents
A =H01 A5 (3)2-RMPP-6H2-LH012-* 5+ 6 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
List of documents
C C
A =H01 A6 (3)2-RMPP-6H2-LH012-* 6- 6 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
List of documents
library 2: PTD_M2_CoC_E
S =H01 B1 (3)2-RMPP-6H2-SH013-* 1+ 3 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
library 1: PTD60617
+H01 PP INCOMING FEEDER CUBICLE
LEGEND AND SYMBOLS
Overview diagram
library 3:
library 4:
S =H01 B2 (3)2-RMPP-6H2-SH013-* 2+ 3 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Symbol
Symbol
Symbol
Symbol
D D
FEEDER OVERVIEW
Overview diagram
S =H01 B3 (3)2-RMPP-6H2-SH013-* 3- 3 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
FEEDER OVERVIEW
CopyRight (C) Siemens AG 2014 All Rights Reserved
Overview diagram
S =H01 G1 (3)2-RMPP-6H2-SH014-* 1+ 2 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
POWER SUPPLY DC 110V
Circuit diagram
S =H01 G2 (3)2-RMPP-6H2-SH014-* 2- 2 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
E +H01 PP INCOMING FEEDER CUBICLE E
POWER SUPPLY AC 230V
Circuit diagram
S =H01 M1 (3)2-RMPP-6H2-SH015-* 1+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
CLOSING CIRCUIT
Circuit diagram
S =H01 M2 (3)2-RMPP-6H2-SH015-* 2+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
F CLOSING CIRCUIT F
Circuit diagram
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg No. A =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE +H01 A1
Sheet 1+
909611 (3)2-RMPP-6H2-LH012-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by List of documents 6 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Manufacturer document number
FBINH2
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / A / A / 2
Designation Sheet Sheets Date Description Prepared by
Customer document number
S =H01 M3 (3)2-RMPP-6H2-SH015-* 3+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
OPENING CIRCUIT
Circuit diagram
S =H01 M4 (3)2-RMPP-6H2-SH015-* 4+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
UVR & CONTROL
Circuit diagram
S =H01 M5 (3)2-RMPP-6H2-SH015-* 5+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file C: C_FB_EN.etr, 04-11-24
+H01 PP INCOMING FEEDER CUBICLE
CONTROL
Circuit diagram
B B
Translate file A: A_COC_DE
S =H01 M6 (3)2-RMPP-6H2-SH015-* 6+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file D: leer2
Translate file B: leer1
+H01 PP INCOMING FEEDER CUBICLE
CONTROL
Circuit diagram
S =H01 M7 (3)2-RMPP-6H2-SH015-* 7+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
BINARY INPUT
Circuit diagram
S =H01 M8 (3)2-RMPP-6H2-SH015-* 8+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
BINARY INPUT
C Circuit diagram C
S =H01 M9 (3)2-RMPP-6H2-SH015-* 9+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
CONTROL / INDICATION
Circuit diagram
library 2: PTD_M2_CoC_E
S =H01 M10 (3)2-RMPP-6H2-SH015-* 10+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
library 1: PTD60617
+H01 PP INCOMING FEEDER CUBICLE
CONTROL
Circuit diagram
library 3:
library 4:
S =H01 M11 (3)2-RMPP-6H2-SH015-* 11+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Symbol
Symbol
Symbol
Symbol
D D
CONTROL / INDICATION
Circuit diagram
S =H01 M12 (3)2-RMPP-6H2-SH015-* 12+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
INTERLOCKING
CopyRight (C) Siemens AG 2014 All Rights Reserved
Circuit diagram
S =H01 M13 (3)2-RMPP-6H2-SH015-* 13+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
BB SF6 MONITORING & SIGNALLING
Circuit diagram
S =H01 M14 (3)2-RMPP-6H2-SH015-* 14+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
E +H01 PP INCOMING FEEDER CUBICLE E
SIGNALLING ATS
Circuit diagram
S =H01 M15 (3)2-RMPP-6H2-SH015-* 15+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SIGNALLING ATS
Circuit diagram
S =H01 M16 (3)2-RMPP-6H2-SH015-* 16+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
F SIGNALLING F
Circuit diagram
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg No. A =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE +H01 A2
Sheet 2+
909611 (3)2-RMPP-6H2-LH012-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by List of documents 6 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Manufacturer document number
FBINH2
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / A / A / 3
Designation Sheet Sheets Date Description Prepared by
Customer document number
S =H01 M17 (3)2-RMPP-6H2-SH015-* 17+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
SIGNALLING
Circuit diagram
S =H01 M18 (3)2-RMPP-6H2-SH015-* 18+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SIGNALLING
Circuit diagram
S =H01 M19 (3)2-RMPP-6H2-SH015-* 19+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file C: C_FB_EN.etr, 04-11-24
+H01 PP INCOMING FEEDER CUBICLE
SIGNALLING
Circuit diagram
B B
Translate file A: A_COC_DE
S =H01 M20 (3)2-RMPP-6H2-SH015-* 20+ 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file D: leer2
Translate file B: leer1
+H01 PP INCOMING FEEDER CUBICLE
SIGNALLING
Circuit diagram
S =H01 M21 (3)2-RMPP-6H2-SH015-* 21- 21 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SPARES
Circuit diagram
S =H01 S1 (3)2-RMPP-6H2-SH016-* 1+ 7 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
C Circuit diagram C
S =H01 S2 (3)2-RMPP-6H2-SH016-* 2+ 7 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
Circuit diagram
library 2: PTD_M2_CoC_E
S =H01 S3 (3)2-RMPP-6H2-SH016-* 3+ 7 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
library 1: PTD60617
+H01 PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
Circuit diagram
library 3:
library 4:
S =H01 S4 (3)2-RMPP-6H2-SH016-* 4+ 7 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Symbol
Symbol
Symbol
Symbol
D D
TRANSFORMER CIRCUITS
Circuit diagram
S =H01 S5 (3)2-RMPP-6H2-SH016-* 5+ 7 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
CopyRight (C) Siemens AG 2014 All Rights Reserved
Circuit diagram
S =H01 S6 (3)2-RMPP-6H2-SH016-* 6+ 7 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
Circuit diagram
S =H01 S7 (3)2-RMPP-6H2-SH016-* 7- 7 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
E +H01 PP INCOMING FEEDER CUBICLE E
TRANSFORMER CIRCUITS
Circuit diagram
S =H01 Z1 (3)2-RMPP-6H2-SH017-* 1+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
CIRCUIT BREAKER
Equipment Diagram
S =H01 Z2 (3)2-RMPP-6H2-SH017-* 2+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
F THREE POSITION SWITCH F
Equipment Diagram
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg No. A =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE +H01 A3
Sheet 3+
909611 (3)2-RMPP-6H2-LH012-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by List of documents 6 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Manufacturer document number
FBINH2
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / A / A / 4
Designation Sheet Sheets Date Description Prepared by
Customer document number
S =H01 Z3 (3)2-RMPP-6H2-SH017-* 3+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
THREE POSITION SWITCH
Equipment Diagram
S =H01 Z4 (3)2-RMPP-6H2-SH017-* 4+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
CB SF6 Pressure Monitoring
Equipment Diagram
S =H01 Z5 (3)2-RMPP-6H2-SH017-* 5+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file C: C_FB_EN.etr, 04-11-24
+H01 PP INCOMING FEEDER CUBICLE
BB SF6 Pressure Monitoring
Equipment Diagram
B B
Translate file A: A_COC_DE
S =H01 Z6 (3)2-RMPP-6H2-SH017-* 6+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file D: leer2
Translate file B: leer1
+H01 PP INCOMING FEEDER CUBICLE
Capdis S2+
Equipment Diagram
S =H01 Z7 (3)2-RMPP-6H2-SH017-* 7+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
PRIMARY DEVICE
Equipment Diagram
S =H01 Z8 (3)2-RMPP-6H2-SH017-* 8+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
C Equipment Diagram C
S =H01 Z9 (3)2-RMPP-6H2-SH017-* 9+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
Equipment Diagram
library 2: PTD_M2_CoC_E
S =H01 Z10 (3)2-RMPP-6H2-SH017-* 10+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
library 1: PTD60617
+H01 PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
Equipment Diagram
library 3:
library 4:
S =H01 Z11 (3)2-RMPP-6H2-SH017-* 11+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Symbol
Symbol
Symbol
Symbol
D D
SECONDARY DEVICE
Equipment Diagram
S =H01 Z12 (3)2-RMPP-6H2-SH017-* 12+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
CopyRight (C) Siemens AG 2014 All Rights Reserved
Equipment Diagram
S =H01 Z13 (3)2-RMPP-6H2-SH017-* 13+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
Equipment Diagram
S =H01 Z14 (3)2-RMPP-6H2-SH017-* 14+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
E +H01 PP INCOMING FEEDER CUBICLE E
SECONDARY DEVICE
Equipment Diagram
S =H01 Z15 (3)2-RMPP-6H2-SH017-* 15+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
Equipment Diagram
S =H01 Z16 (3)2-RMPP-6H2-SH017-* 16+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
F SECONDARY DEVICE F
Equipment Diagram
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg No. A =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE +H01 A4
Sheet 4+
909611 (3)2-RMPP-6H2-LH012-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by List of documents 6 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Manufacturer document number
FBINH2
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / A / A / 5
Designation Sheet Sheets Date Description Prepared by
Customer document number
S =H01 Z17 (3)2-RMPP-6H2-SH017-* 17+ 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
SECONDARY DEVICE
Equipment Diagram
S =H01 Z18 (3)2-RMPP-6H2-SH017-* 18- 18 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+H01 PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
Equipment Diagram
V =H01 /1 (3)2-RMPP-6H2-SH018-* 1+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file C: C_FB_EN.etr, 04-11-24
+.B PP INCOMING FEEDER CUBICLE
+.B-X1A
Connection table
B B
Translate file A: A_COC_DE
V =H01 /2 (3)2-RMPP-6H2-SH018-* 2+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file D: leer2
Translate file B: leer1
+.B PP INCOMING FEEDER CUBICLE
+.B-X1B
Connection table
V =H01 /3 (3)2-RMPP-6H2-SH018-* 3+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-X1C
Connection table
V =H01 /4 (3)2-RMPP-6H2-SH018-* 4+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-X1CA
C Connection table C
V =H01 /5 (3)2-RMPP-6H2-SH018-* 5+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-X2A
Terminal strip
library 2: PTD_M2_CoC_E
V =H01 /6 (3)2-RMPP-6H2-SH018-* 6+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
library 1: PTD60617
+.B PP INCOMING FEEDER CUBICLE
+.B-X2B
Terminal strip
library 3:
library 4:
V =H01 /7 (3)2-RMPP-6H2-SH018-* 7+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
Symbol
Symbol
Symbol
Symbol
D D
+.B-X5
Terminal strip
V =H01 /8 (3)2-RMPP-6H2-SH018-* 8+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-X5
CopyRight (C) Siemens AG 2014 All Rights Reserved
Terminal strip
V =H01 /9 (3)2-RMPP-6H2-SH018-* 9+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-X5
Terminal strip
V =H01 /10 (3)2-RMPP-6H2-SH018-* 10+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
E +.B PP INCOMING FEEDER CUBICLE E
+.B-X6
Terminal strip
V =H01 /11 (3)2-RMPP-6H2-SH018-* 11+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-X7
Terminal strip
V =H01 /12 (3)2-RMPP-6H2-SH018-* 12+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
F +.B-X7 F
Terminal strip
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg No. A =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE +H01 A5
Sheet 5+
909611 (3)2-RMPP-6H2-LH012-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by List of documents 6 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Manufacturer document number
FBINH2
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / A / A / 6
Designation Sheet Sheets Date Description Prepared by
Customer document number
V =H01 /13 (3)2-RMPP-6H2-SH018-* 13+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B-X9
Terminal strip
V =H01 /14 (3)2-RMPP-6H2-SH018-* 14+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-X40
Terminal strip
V =H01 /15 (3)2-RMPP-6H2-SH018-* 15+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file C: C_FB_EN.etr, 04-11-24
+.B PP INCOMING FEEDER CUBICLE
+.B-XB11
Connection table
B B
Translate file A: A_COC_DE
V =H01 /16 (3)2-RMPP-6H2-SH018-* 16+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
Translate file D: leer2
Translate file B: leer1
+.B PP INCOMING FEEDER CUBICLE
+.B-XE13
Terminal strip
V =H01 /17 (3)2-RMPP-6H2-SH018-* 17+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-XH1
Terminal strip
V =H01 /18 (3)2-RMPP-6H2-SH018-* 18+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-XPE
C Terminal strip C
V =H01 /19 (3)2-RMPP-6H2-SH018-* 19+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-XQ0
Terminal strip
library 2: PTD_M2_CoC_E
V =H01 /20 (3)2-RMPP-6H2-SH018-* 20+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
library 1: PTD60617
+.B PP INCOMING FEEDER CUBICLE
+.B-XQ0
Terminal strip
library 3:
library 4:
V =H01 /21 (3)2-RMPP-6H2-SH018-* 21+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
Symbol
Symbol
Symbol
Symbol
D D
+.B-XQ1
Terminal strip
V =H01 /22 (3)2-RMPP-6H2-SH018-* 22+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-XQ1
CopyRight (C) Siemens AG 2014 All Rights Reserved
Terminal strip
V =H01 /23 (3)2-RMPP-6H2-SH018-* 23+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-XR1
Terminal strip
V =H01 /24 (3)2-RMPP-6H2-SH018-* 24+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
E +.B PP INCOMING FEEDER CUBICLE E
+.B-XSH
Terminal strip
V =H01 /25 (3)2-RMPP-6H2-SH018-* 25+ 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.B PP INCOMING FEEDER CUBICLE
+.B-XV
Terminal strip
V =H01 /26 (3)2-RMPP-6H2-SH018-* 26- 26 19.01.20 8DA10 33kV GIS SWITCHGEAR EM MS MV
+.N PP INCOMING FEEDER CUBICLE
F +.N-XSH1 F
Terminal strip
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg No. A =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE +H01 A6
Sheet 6-
909611 (3)2-RMPP-6H2-LH012-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by List of documents 6 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / S / B / 1
FBSTP2
LEGEND AND SYMBOLS:
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A SYMBOLS: DESCRIPTIONS SYMBOLS: DESCRIPTIONS SYMBOLS: DESCRIPTIONS A
1N
3
5
-X06
1
2
-F -F -F
-Q0
1
I > I > I > I > I > I > I > -M1 M SF6 CIRCUIT BREAKER DRIVE MOTOR
MINIATURE CIRCUIT BREAKER FLUORESCENT LAMP
4
4
2
6
2N
DC
2 POLE 1 POLE+NEUTRAL 3 POLE
2
Translate file C: C_FB_EN.etr, 04-11-24
1
1
STABILIZING RESISTOR CHANGE OVER CONTACT
B HEATING ELEMENT B
Translate file A: A_COC_DE
2
2
Translate file D: leer2
Translate file B: leer1
21
CONTROL/AUX. RELAY COIL -K
TIME DELAY CHANGE OVER CONTACT
NORMALLY CLOSE CONTACT
22
23
13
13
2-ELEMENT PUSH BUTTON SWITCH NORMALLY OPEN CONTACT WINDING COIL
14
24
14
C C
L
S31
8MR2170-1C
Test switch
TEST SWITCH
> θ THERMOSTAT MODULE FOR HEATER BI-STABLE LATCHED CONTACTOR RELAY
2
3
library 2: PTD_M2_CoC_E
library 1: PTD60617
23
13
F15
21
13
BI5 - RELAY BINARY INPUT
library 3:
library 4:
LIMIT SWITCH
SEQUENTIAL SELECTOR SWITCH -
14
22
14
24
Symbol
Symbol
Symbol
Symbol
D D
13
-X..
4
2
LAMP TEST SWITCH TERMINAL BLOCK
2-POSITION SELECTOR SWITCH
14
1
3
CopyRight (C) Siemens AG 2014 All Rights Reserved
+
A AMMETER
RELAY POWER SUPPLY MODULE GROUND
-
+.T
E E
2
4
4
REMOTE
-S11
LOCAL
4
2
SF6 PRESSURE SWITCH INDICATOR 2-POSITION SELECTOR SWITCH V VOLTMETER
1
3
2-POS. SEL. SW.
2
1
CH10
3
1
L
X1
Red
SOCKET OUTLET FACTORY
INDICATOR LAMP
F AS-BUILT F
X2
X5
N
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
LEGEND AND SYMBOLS
+H01 B1
Sheet 1+
909611 (3)2-RMPP-6H2-SH013-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Overview diagram 3 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / B / 2 =H01 =H02
+H01 +H02
=HZ01 =HZ06
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
33kV, 1250A @ 40 DEGREE C, 3-PH., 3-WIRE, 25kA/3s, BUS-1
Translate file C: C_FB_EN.etr, 04-11-24
-Q1-S5
B -Q1-S1 B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
S1
-Q0
1250A
CB1
M
-A51
C C
P1
L1,L2,L3
T1/1
1250-800/1A
CL 5P20, 45-30VA
Rct<=8-5 Ohms
Vk=1200-800V
library 2: PTD_M2_CoC_E
MAIN-1
library 1: PTD60617
T1/2
1250-800/1A
CL 5P20, 45-30VA
Rct<=8-5 Ohms
library 3:
library 4:
Vk=1200-800V
MAIN-2
T1/3
1250/1A
Symbol
Symbol
Symbol
Symbol
D CL 5P20, 25VA D
P2
Rct<=3 Ohms
87B
CopyRight (C) Siemens AG 2014 All Rights Reserved
INTERFACE
3 x S3
L1,L2,L3
33kV 110V 110V
-T5
3 3 3
25VA Cl. 0,2/3P
E 25VA Cl. 0,2/3P E
PP INCOMING FEEDER CUBICLE PP DUMMY CUBICLE
FACTORY
F AS-BUILT F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
FEEDER OVERVIEW
+H01 B2
Sheet 2+
909611 (3)2-RMPP-6H2-SH013-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Overview diagram 3 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / B / 3
=H01
+H01
=HZ01
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
LEGEND
1 CLOSED/OPEN POSITION INDICATOR FOR DS FUNCTION OF THREE-POSITION DISCONNECTOR
2 ACTUATING OPENING FOR EARTHING FUNCTION
3 ACTUATING OPENING FOR DISCONNECTOR FUNCTION
Translate file C: C_FB_EN.etr, 04-11-24
4 INTERROGATION LEVER
B B
Translate file A: A_COC_DE
5 CLOSED/OPEN POSITION INDICATOR FOR ES FUNCTION OF THREE-POSITION DISCONNECTOR
NOTE: REFER TO GENERAL DWG. H00
Translate file D: leer2
Translate file B: leer1
SHT /D12 FOR DETAILS 6 CLOSED/OPEN POSITION INDICATOR FOR VACUUM CIRCUIT BREAKER
7 MANOMETER FOR SF6 MONITORING
10 CONTROL GATE FOR OPENING THE ACTUATING OPENINGS
11 MECHANICAL "ON" PUSHBUTTON FOR VACUUM CIRCUIT BREAKER
10
4
1 3 2 12 ACTUATING OPENING FOR MANUAL CHARGING OF THE CB OPERATING SPRING
5
6 2920 13 MECHANICAL "OFF" PUSHBUTTON FOR VACUUM CIRCUIT BREAKER
C C
14 LEVER FOR LOCKING THE VACUUM CIRCUIT BREAKER AGAINST 'DE-EARTHING" (PADLOCKABLE)
7
15 CIRCUIT BREAKER SPRING CHARGED INDICATOR
library 2: PTD_M2_CoC_E
16 CLOSED/OPEN POSITION INDICATOR FOR VACUUM CIRCUIT BREAKER
library 1: PTD60617
12 11 17 OPERATING CYCLE COUNTER FOR VACUUM CIRCUIT BREAKER
library 3:
library 4:
18 VOLTAGE DETECTING DEVICE "CAPDIS S2+"
15 13
Symbol
Symbol
Symbol
Symbol
D 16 14 D
17
THE FOLLOWING RELATIVE LOCATION CODES HAVE BEEN CONSIDERED
CopyRight (C) Siemens AG 2014 All Rights Reserved
IN THE CIRCUIT DIAGRAM
18
+.B MOUNTING PLATE OR REAR WALL OF THE LOW VOLTAGE COMPARTMENTS
+.T DOOR OF THE LOW VOLTAGE COMPARTMENTS
+.L VACUUM CB OPERATING MECHANISM COMPARTMENT
E E
+.D THREE-POSITION SWITCH OPERATING MECHANISM COMPARTMENT
+.F OUTSIDE PRIMARY ENCLOSURE ( SWITCHGEAR HOUSING)
+.N NICHE
600
FACTORY
PP INCOMING FEEDER CUBICLE
F AS-BUILT F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
FEEDER OVERVIEW
+H01 B3
Sheet 3-
909611 (3)2-RMPP-6H2-SH013-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Overview diagram 3 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / S / G / 1
FBSTP2
POWER SUPPLY POWER SUPPLY POWER SUPPLY POWER SUPPLY
CLOSING & OPENING CIRCUIT UVR, CONTROL & PROTECTION CIRCUIT CB MOTOR DRIVE & INDICATION CIRCUIT BUS-1 COMPT. SF6 LOW PRESSURE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
DC 110V DC 110V
L+ L- L+ L-
ADJACENT PANEL
+.B
-XR1 1 RIGHT SIDE
+.B BUS WIRE DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
C
-XR1 2
=H00 SHEET /G1
C +.B
-XR1 3
B B
Translate file A: A_COC_DE
C +.B
-XR1 4
Translate file D: leer2
Translate file B: leer1
C C
library 2: PTD_M2_CoC_E
LV COMPARTMENT
library 1: PTD60617
+.B +.B +.B +.B
4
4
2
2
-F10 -F20 -F30 -F40
library 3:
library 4:
/Z12.5 /Z12.5 /Z12.5 /Z12.5
6A 6A 6A 6A
I > I > I > I > I > I > I > I >
Symbol
Symbol
Symbol
Symbol
D D
1
3
CopyRight (C) Siemens AG 2014 All Rights Reserved
H07Z-K 1,5 GY
+.B A A
27
28
H07Z-K 1,5 GY H07Z-K 1,5 GY -XQ0 H07Z-K 1,5 GY H07Z-K 1,5 GY
E E
+.L -X12 -X12
9
-Q0
/Z1.1
-M1 M
DC
FACTORY
40L+
40L-
20L+
20L-
30L+
30L-
10L+
10L-
CB.
AS-BUILT
/M1.1
/M1.1
/M4.1
/M4.1
/M11.1
/M11.1
/M13.2
/M13.2
F F
ALL UNIDENTIFIED WIRES H07Z-K 2,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
POWER SUPPLY DC 110V
+H01 G1
Sheet 1+
909611 (3)2-RMPP-6H2-SH014-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 2 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / G / 2 POWER SUPPLY POWER SUPPLY
FOR PANEL HEATER FOR PANEL LIGHTING
AC 230V
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B
-XR1 11
ADJACENT PANEL
A RIGHT SIDE
+.B
-XR1 12 BUS WIRE DIAGRAM
A
=H00 SHEET /G1
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
H07Z-K 2,5 BK
H07Z-K 2,5 BK
+.B +.B
N
1
1
-F151 -F152
/Z12.1 /Z12.1
10A 3A
C I > I > I > I > C
(N)
(N)
+.B +.B +.B
3
-XSH -XSH -XSH
LV COMPARTMENT
Y X A
A B +.B
3
-XE13
+.B
L
library 2: PTD_M2_CoC_E
-B151
/Z18.5
library 1: PTD60617
8MR2170-1C
θ
library 3:
library 4:
+.B
21
-S13
3
+.B
/Z18.2
Symbol
Symbol
Symbol
Symbol
+.B
22
BYPASS
6
D -XPE D
4
-XSH
AUTO
A H07Z-K 1,5 GNYE
A
+.T
13
21
-S20
+.B
L
PE
-E12
/Z18.2
14
22
CopyRight (C) Siemens AG 2014 All Rights Reserved
/Z18.5 +.B B
-XE13
1
+.B +.B A +.N
A
9
-XSH -XQ0 -XSH1
1
B D C B
BK
BK
A A
=H01-W1 -W1
N
SIHSI-Cu 3x0,5mm2 SIHSI-Cu 3x0,5mm2
1
+.B +.N
+.L -X08
1
-R02 -R03
-Q0 +.B
E /Z18.7 /Z18.7 -E13 E
/Z1.1
/Z18.2
-R01
2
GNYE PE
GNYE PE
2
2
BK
BK
CB.
-X08
0
=H01-W1 -W1 +.B A
2
SIHSI-Cu 3x0,5mm2 SIHSI-Cu 3x0,5mm2 -XE13
+.B A B +.N A A
PE
PE
2
-XSH -XSH1
H07Z-K 1,5 GNYE H07Z-K 1,5 GNYE
B
+.B FACTORY
4
B A B B -XE13
+.B A +.B
AS-BUILT
2
-XPE
+.B +.B C -PE
10
10
-XQ0 -XQ0
F F
D A
ALL UNIDENTIFIED WIRES H07Z-K 1,5 BK
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
POWER SUPPLY AC 230V
+H01 G2
Sheet 2-
909611 (3)2-RMPP-6H2-SH014-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 2 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 1
*
CB PERMIT INTERLOCKING FAULT
TO CLOSE (INCOMER-2)
10LA+
/M2.5
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A +.B +.B A
10L+ -X40 1 -X40 2 10L+
/G1.2 /M2.1
110VDC B Y X B
+.B A
18
-X40
+.T +.T
G15
7
=H02 +.T -27DC1 -74TC1
-F31 B
NO FAULT (27/59)
DC1 HEALTHY
DC1 HEALTHY
+H02 /Z11.2 /Z11.5
/Z8.1 =H06 =H11
R13 +.B A
58
Translate file C: C_FB_EN.etr, 04-11-24
-X7
+.T +H06 +.B +.B +H11
7
A A
28
29
-74TC2 -X9 -X9
XR152
XR351
DC1 HEALTHY
=H02/Z6.5
P543
25A
=H04
5
G14
B -X6 B
G13
Translate file A: A_COC_DE
REFER TO =H11/M15
+H04
Translate file D: leer2
Translate file B: leer1
+.B +.T +.T
XR351
3
B
LOCKOUT HEALTHY
9
-X40 -27DC2 -F86.1 -F31
DC2 HEALTHY
5
/Z11.2 /Z9.2 +.B
121
R12
A -XQ0
-K50BF
+.B
19
+.T
7
-X40
TR-241
REFER TO =H06/M12
+.B
XR152
-27DC3 A
-X5 31 B
DC1 HEALTHY
=H02/Z6.2 A +.B
60
5
1
-X7
26A
B +.B B -Q0
28
LOCKOUT HEALTHY -X6 -X5
+.T
3
S1 A
-F86.2
XR152
A
=H02/Z4.2 =H10 +.B +.B A
5
14
15
+.B +.B
133
A -X9 -X9
34
=EXT +H10
XX
C -X5 -XQ1
X
C
TR-241
+MC
EXT. CLOSING AUTHORIZATION
A
+.B
122
B
Reverse Logic
+.D -X11
X42.8
1
-XQ0
1
+.T -Q1
-F32
NO FAULT (27/59)
/Z2.1 -K32 -F32
MARSHALLING CABINET
=H02/Z2.1
133
21
BO17 +.B BO5
REFER TO =H10/M5
-K32 +.B +.B
36
37
library 2: PTD_M2_CoC_E
-X9 -X9
=H02/Z7.1
RED 670
3 POS. SW.
22
library 1: PTD60617
A A
X42.7
XX
134
X +.B +.B
22
23
-X9 -X9
-X11
library 3:
library 4:
134 0
+.B B +.B B A
32
33
-X5 -X5 +.B
-XQ1 +.B A
29
Y X -X5
A
Symbol
Symbol
Symbol
Symbol
D A D
B
* +.B A
20
-X40
+.B B +.B
10
LV COMP.
11
-X40 -X40
B
Y X
21
A A +.B
-KSF6.1
CopyRight (C) Siemens AG 2014 All Rights Reserved
51A
=H11 =H06 =H03 +.B +.B /Z15.6
35A
14
15
91A
DEAD BUS CLOSING PERMISSIVE
22
-XQ0 -X6 -X6 CB SF6 LOW
-XQ0 -X6
+H11 +H06 +H03
13
-KVT1
21
+.B
-KBSF6.1
/Z17.1
14
-Q0
-Q1
-Q0 -K87B.1 BB SF6 LOW 22
13
E -KVT4 E
13
+.B
-KH01
14
52A
/Z15.6
34A
92A
14
-XQ0
-XQ0 -X6
FACTORY
A1
+.B
-KCBR
+.B A +.B A /Z15.1
AS-BUILT
12
13
A2
-X40 -X40
Y X B
10L- 10L-
/G1.2 /M2.1
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CLOSING CIRCUIT
+H01 M1
Sheet 1+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 2 LOCAL CB OPEN/CLOSE REMOTE CB OPEN/CLOSE CB CLOSING CB
COMMAND COMMAND VIA INTERPOSING RELAY CLOSING
+.B
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A 10L+ -X40 3 10L+ A
/M1.8 /M3.1
110VDC A B
/M1.8
+.T
4
-S11
REMOTE
/Z10.2
LOCAL
13
+.B
10LA+
+.B
4
-K0E
3
-KRC
Translate file C: C_FB_EN.etr, 04-11-24
/Z17.1
CH10-A722-600
/Z13.6
14
CB CLOSE
5
7
CMD
3 REMOTE
1 LOCAL
+.B
POS.
B B
POS
Translate file A: A_COC_DE
2
-X40
Translate file D: leer2
Translate file B: leer1
+.B
4
-KRC
/Z13.6
13
+.B
6
8
+.B B +.B B -KCBR
14
16
-X40 -X40
/Z15.1
14
PERMIT
A A =H06 TO CLOSE
+.B A
81
-X6
+H06
+.T
7
=EXT
XX
XX
-S10
X X
OFF +MC
ON
/Z10.2
0
REFER TO =H06/M12
C C
-F87B
R21
MARSHALLING CABINET
CHR10
8 CB CLOSE
OPEN CLOSE
6 CB OPEN CMD CMD
CMD
CMD
library 2: PTD_M2_CoC_E
+.B
XX
XX
82
X X -X6
library 1: PTD60617
A
+.B A
17
-XQ0
library 3:
library 4:
+.B A +.B A
15
17
-X40 -X40
-X11
9
B
B +.L
Symbol
Symbol
Symbol
Symbol
D -Q0 D
/Z1.1
22
13
11
-K1 -K1 -S1
21
+.B -S3
B A
36
37
31
14
21
12
-X40 -K1
CB.
22
Y X B
CopyRight (C) Siemens AG 2014 All Rights Reserved
Man. OFF
32
-K1 -Y9
CC
Anti-Pumping
13
-S12 Man. ON sealed
14
E E
-X11
8
(+)2
A1
A1
+.B +.B +.B
-K0A -K0E -KRC
FACTORY /Z17.1 /Z17.1 /Z13.6
A2
A2
(-)1
AS-BUILT
+.B B
18
10L- -XQ0 10L-
/M1.8 /M3.1
F A D F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CLOSING CIRCUIT
+H01 M2
Sheet 2+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 3
LOC/REM CB CB SF6 TRIP BB SF6 TRIP 50CBF TRIP CB OPENING BB PROT. TRIP TRIP ORDER PROTECTION TRIP * SUPERVISION
OPENING VERY LOW VERY LOW =H04 VIA INTERPOSING =H06 MAIN-1
PRESSURE PRESSURE RELAY
+.B
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A 10L+ -X40 4 5 6 7 8 A
/M2.8
110VDC B Y X Y X B A Y X
A B A B B
+.B +.B
1
-R74.11 -R74.13
+.T
H12
10
+.T -F86.1 /Z11.6 /Z11.6
+.B
Translate file C: C_FB_EN.etr, 04-11-24
=H04 =H06 -F31
27A
22A
2
/Z9.2 -KRT
R5 SHALL OPERATE
-X6 -X6 /Z8.1
+H04 +H06
@ FAULT (27, 59)
/Z13.6
+.B B +.B B
5
7
26
27
53
73
13
+.B +.B +.B R5 -X40 -X40
B -K0A -KSF6.2 -KBSF6.2 B
Translate file A: A_COC_DE
TR241
/Z17.1 /Z15.5 /Z17.1 A A
P543
14
54
74
OPEN
Translate file D: leer2
Translate file B: leer1
PP BUS SECTIONALIZER CUBICLE
CMD +.T
21
28
-74TC1
H10
H11
12
-K50BF -K87B.1
/Z11.5
+.B A B
4
PP OUTGOING CUBICLE
-KRT
/Z13.6
6
8
XR351
+.T
20
A B C
-S31
28A
23A
2RMLG02
-X6 -X6 /Z10.6
PE
22
27
14
13
19
H07Z-K 2,5 GNYE
+.B A +.B B
28
C -X40 -XPE 4 C
B
+.B
LV COMPARTMENT
1
-R74.12
+.B A A
24
23
25
library 2: PTD_M2_CoC_E
-X40 /Z11.6
2
B Y X Y X B
library 1: PTD60617
+.B A
38
-X40
B
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D +.B B +.B B D
-X40 22 -X40 21
Y X
A
+.B +.B A
-X40 29 -X40 30
B Y X
+.B A +.B A +.B A +.B A +.B B
CopyRight (C) Siemens AG 2014 All Rights Reserved
20
13
31
-XQ0 -XQ0 -XQ0 22 -XQ0 -XQ0 93
543
+.B A
541
+.B A A -XQ1
-XQ1
+.L -X10 -X11 -X11 -X12 -X15
3
9
-Q0
+.D -X52
1
23
93
13
31
+.D -X52 /Z1.1
3
-S16 -S1 -Q1
-Q1
EARTHED
/Z3.1
EARTHED
543
/Z3.1
541
14
24
32
94
OFF
ON
OFF
E E
ON
(+)2
-S1
3 POS. SW.
CB.
+.B
3 POS. SW.
-KRT -Y1
0 544
/Z13.6
2 542
(-)1
-X52
-X52
-X10 -X11 -X12 -X15
4
2
8
FACTORY
544
+.B
542
+.B +.B +.B +.B +.B -XQ1
94
32
14
21
-XQ1 -XQ0 -XQ0 -XQ0 -XQ0
A
A A A A A AS-BUILT
+.B B +.B B +.B B
-X40 31 -X40 32 -X40 33
+.B B B Y X Y X
40
39
10L- -X40 34 35
F /M2.8 F
A Y X A
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
OPENING CIRCUIT
+H01 M3
Sheet 3+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 4
UVR TRIP MAIN-1 PROT.
ORDER TRIP ORDER
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B +.B
20L+ -X5 1 -X5 2 20L+
/G1.3 /M5.1
110VDC B Y X A
A B
Translate file C: C_FB_EN.etr, 04-11-24
+.B B
30
-X5
B A B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
XX
=EXT
X
+MC
MARSHALLING CABINET
ETS TRIP
NOTE:
Note 1
ORDER
13
+.B
+.T
H2
-KRS
1. Contact position changed to closed -F31
/Z15.6
/Z8.1
14
XX at normal condition (Emerg. PB not pressed).
R1
X
P543
C +.B A
C
31
H1
-X5
+.B B
34
B -X5
+.T
18
LV COMPARTMENT
-S31 A
2RMLG02
/Z10.6
library 2: PTD_M2_CoC_E
library 1: PTD60617
17
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
+.B +.B A
43
46
-XQ0 -XQ0
A
+.L
CopyRight (C) Siemens AG 2014 All Rights Reserved
-X13 +.T
9
27
25
-Q0
-F86.1
/Z1.1
/Z9.2
-Y7
43
-S1
UVR
+.B
44
40
37
38
39
TR241
A1
+.B -X5 RL1
CB.
-KH01
R1
/Z15.6
A2
RESET
E E
FACTORY
PE
28
26
-X13
AS-BUILT
8
+.B H07Z-K 2,5 GNYE
44
-XQ0 +.B A
-XPE 5
A
+.B A +.B +.B
20L- -X5 21 -X5 22 -X5 23 20L-
/G1.3 /M5.1
B Y X B A B
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
UVR & CONTROL
+H01 M4
Sheet 4+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 5
SELECTOR SWITCH LOCAL RESET REMOTE REMOTE BI-STABLE RELAY GAS PRESSURE MONITORING
LOCAL REMOTE ORDER IED1 & 2 RESET ORDER RESET ORDER BB PROT. BB PROT. CIRCUIT BREAKER -Q0
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
IED1 IED2 CT ACTIVE CT SHORTED P<< P<
+.B +.B +.B +.B
20L+ -X5 3 -X5 4 -X5 4 -X5 5 20L+
/M4.8 /M6.1
110VDC B Y X Y X Y
A A B B
Translate file C: C_FB_EN.etr, 04-11-24
+.B B +.B B
43
41
B -X5 -X5 B
Translate file A: A_COC_DE
A A
Translate file D: leer2
Translate file B: leer1
890
+.B A
-XQ1
=EXT +.B
521
XX
XX
A
X X -XQ1
+MC
-X88
3
+.T
23
13
-S02
MARSHALLING CABINET
+.D
+.T -X51
6
6
-B0
-S11 +.D
K&N CH10-A722-600
/Z14.6 /Z4.2
14
24
-Q1
REMOTE
/Z10.2
LOCAL
EARTHED
/Z3.1
523
521
4
-B0
OFF
XX
XX
ON
C X X -S1 C
3 POS. SW.
522
524
5
THREE POSITION SWITCH
LV COMPARTMENT
-X51 1 2 3
4
5
+.B A +.B A
44
42
library 2: PTD_M2_CoC_E
-X5 -X5
524
library 1: PTD60617
522
B B +.B
-XQ1
+.B A +.B A
84
83
-X5 -X5
A A
library 3:
library 4:
B B
+.B A
19
-X5 -X88
0
1
Symbol
Symbol
Symbol
Symbol
D B
D
+.B A
20
892
893
+.B
891
-X5
-XQ1
B
A A A
CopyRight (C) Siemens AG 2014 All Rights Reserved
+.B
122
212
-KCT
/Z14.5
A1
A1
A1
A1
A1
+.B +.B +.B +.B +.B +.B
E1
-KS11 -KS11 -KRS -KRS2 -KSF6.2 -KSF6.1
/Z15.1 /Z15.1 /Z15.6 /Z15.6 /Z15.5 /Z15.6
E2
A2
A2
A2
A2
A2
E E
RXMVB 2
FACTORY
121
211
AS-BUILT
20L- 20L-
/M4.8 /M6.1
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CONTROL
+H01 M5
Sheet 5+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 6
CIRCUIT BREAKER -Q0 DISCONNECT SWITCH EARTHING SWITCH
OFF ON OPEN CLOSED OPEN CLOSED
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B +.B +.B
20L+ -X5 6 -X5 7 -X5 8 20L+
/M5.8 /M7.1
110VDC X Y X Y X Y
B B B
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
+.B +.B
103
A A
101
+.B A +.B A
511
-XQ0 -XQ0
111
-XQ1 -XQ1
Y X
+.L -X15 -X15
7
5
-Q0
+.D -X11 -X51
9
/Z1.1 -Q1 +.D
-Q1
/Z2.1
103
101
EARTHED
-S1 -S1 /Z3.1
EARTHED
513
511
113
111
CB.
OFF
C C
ON
OFF
102
104
-S1
ON
3 POS. SW.
-S1
3 POS. SW.
512
514
-X15 -X15
112
114
4
6
LV COMPARTMENT
104
+.B +.B
102
-X51
7
library 2: PTD_M2_CoC_E
-XQ0 -XQ0 -X11
7
library 1: PTD60617
A A
514
+.B +.B
512
114
112
-XQ1 -XQ1
A A A A
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
A1
A1
A1
+.B +.B +.B +.B +.B +.B
E1
E1
E1
-KLQ0 -KLQ0 -KLQ1 -KLQ1 -KLQ1E -KLQ1E
/Z15.1 /Z15.1 /Z16.4 /Z16.4 /Z15.1 /Z15.1
E2
A2
E2
A2
E2
A2
E E
FACTORY
AS-BUILT
+.B
20L- -X5 24 20L-
/M5.8 /M7.1
B A
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CONTROL
+H01 M6
Sheet 6+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 7
CIRCUIT BREAKER, -Q0 DISCONNECT SWITCH EARTHING SWITCH SELECTOR SWITCH CB PERMIT
OPEN CLOSED OPEN CLOSED OPEN CLOSED LOCAL REMOTE TO CLOSE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B +.B
20L+ -X5 9 -X5 10 20L+
/M6.8 /M8.1
110VDC X Y X A
B B
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
+.B A +.B A
83
Translate file D: leer2
81
Translate file B: leer1
-XQ0 -XQ0
+.L -X14 -X14
5
3
-Q0
/Z1.1
83
23
81
21
13
21
13
21
13
-S1 -S1 +.B +.B +.B +.B
CB.
-KLQ1 -KLQ1E -KS11 -KCBR
/Z16.4 /Z15.1 /Z15.1 /Z15.1
82
84
22
14
22
14
22
14
24
C C
*
-X14 -X14
4
13
+.B
+.B +.B
LV COMPARTMENT
-KXCB
84
82
-XQ0 -XQ0
/Z13.6
library 2: PTD_M2_CoC_E
14
A A
library 1: PTD60617
library 3:
library 4:
+.B B +.B B +.B B +.B B +.B B +.B B +.B B
45
46
47
48
49
50
51
-X5 -X5 -X5 -X5 -X5 -X5 -X5
Symbol
Symbol
Symbol
Symbol
D A A A A A A A D
CopyRight (C) Siemens AG 2014 All Rights Reserved
+.T
D2
D4
D6
D8
D10
D12
D14
D16
F2
-F31
/Z8.1
OPTO 1 OPTO 2 OPTO 3 OPTO 4 OPTO 5 OPTO 6 OPTO 7 OPTO 8 OPTO 9
P 543
E E
D13
D15
D11
FACTORY
D3
D5
D7
D9
D1
F1
AS-BUILT
20L- 20L-
/M6.8 /M8.1
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
BINARY INPUT
+H01 M7
Sheet 7+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 8
*
LOC/REMOTE VT MEASUREMENT RESET TRIP LOCKOUT RELAY 50BF FROM ETS TRIP SPARE MAIN-1 PROT. RELAY
CB CLOSE CMD FAULT ORDER OPERATED BB PROT. RELAY ORDER (IED1) POWER SUPPLY
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B +.B +.B +.B +.B +.B +.B
20L+ -X5 64 -X5 65 -X5 11 -X5 12 -X5 13 -X5 14 -X5 15 20L+
/M7.8 /M9.1
110VDC A B A B B Y X Y X Y X Y X Y
A A A B B
Translate file C: C_FB_EN.etr, 04-11-24
+.B B
32
-X5
B B
Translate file A: A_COC_DE
A
Translate file D: leer2
Translate file B: leer1
XX
=H02 =H06 =EXT
X
24A
+.B A
35
+H02 -X5 +H06 -X6 +MC
MARSHALLING CABINET
NOTE:
ETS TRIP
Note 1.
53
23
ORDER
13
13
+.B +.N +.N +.B 1. Contact position changed to closed
-K0E -KVT5 -KVT6 -KRS -F86 F87B
+.T
7
at normal condition (Emerg. PB not pressed).
/Z17.1 /Z16.5 /Z16.5 /Z15.6 -F86.1 R9
54
14
14
24
CB CLOSE
/Z9.2
CMD
XX
X
25A
+.B
36
-X5 -X6
TR241
C A C
5
+.B A
33
-X5
B
LV COMPARTMENT
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
+.B B +.B B +.B B +.B B +.B B +.B
54
52
53
56
57
58
-X5 -X5 -X5 +.B B -X5 -X5 -X5
55
-X5
A A A A A A
Symbol
Symbol
Symbol
Symbol
D A D
FACTORY
CopyRight (C) Siemens AG 2014 All Rights Reserved
AS-BUILT
+.T
F4
F6
F8
F10
F12
F14
F16
J2
-F31
/Z8.1
OPTO 10 OPTO 11 OPTO 12 OPTO 13 OPTO 14 OPTO 15 OPTO 16
E E
P 543
F13
F15
F11
PE
F3
F5
F7
F9
J1
+.B B H07Z-K 4,0 GNYE
-XPE 6
20L- 20L-
/M7.8 /M9.1
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
BINARY INPUT
+H01 M8
Sheet 8+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 9
*
CB PERMIT VOLTAGE RELAY VOLTAGE RELAY
TO CLOSE POWER SUPPLY POWER SUPPLY
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A (COMPLEMENT) A
+.B
20L+ -X5 16 20L+
/M8.8 /M10.1
110VDC X B
A
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
+.B A +.B A
23
41
-XQ0 -XQ0
+.L -X11 -X12
1
-Q0
/Z1.1
41
13
-S41 -S1
CB.
14
42
C -X11 -X12 C
0
+.B +.B
24
42
-XQ0 -XQ0
A A
LV COMPARTMENT
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
+.N +.N
A1
A1
-F27.1 -F27.2
/Z17.6 /Z17.6
Symbol
Symbol
Symbol
Symbol
D D
VMD420
VMD420
A2
A2
PE
PE
CopyRight (C) Siemens AG 2014 All Rights Reserved
H07Z-K 1,5 GNYE H07Z-K 1,5 GNYE
+.B A +.B A
4
3
-XPE -XPE
E E
FACTORY
A1
+.B
-KXCB
/Z13.6
AS-BUILT
A2
+.B
85
86
87
88
89
90
-X5
+.B B +.B
20L- -X5 25 -X5 26 20L-
/M8.8 /M10.1
A Y X B
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CONTROL / INDICATION
+H01 M9
Sheet 9+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 10
POWER SUPPLY CAPACITIVE VOLTAGE DETECTING SYSTEM VT MEASUREMENT VT MEASUREMENT DC SUPERVISION
CAPDIS S2+ FAULT WDG-1 FAULT WDG-2
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B +.B
20L+ -X5 17 -X5 18
/M9.8
110VDC A B B A
Translate file C: C_FB_EN.etr, 04-11-24
+.N +.N
21
21
-F27.1 -F27.2
B /Z17.6 /Z17.6 B
VT WDG.2
SEE NOTE
SEE NOTE
VT WDG.1
Translate file A: A_COC_DE
K2 K2
Translate file D: leer2
Translate file B: leer1
VMD420
VMD420
+.B A +.B +.B A
-XH1 2 -XH1 5 -XH1 8
24
24
22
22
D D A D
-XH1-A51 -XH1-A51
8
2
RD
PK
GN
43
43
53
13
=H01-W01-A51 +.N +.N +.N +.N
-KVT2 -KVT1 -KVT2 -KVT1
/Z16.1 /Z16.1 /Z16.1 /Z16.1 +.B +.B
11
11
14
44
44
54
-F601 -F501
+.F
2
4
-A51 /Z13.1 /Z13.1
14
12
14
12
43
53
83
+
13
C /Z6.1 +.N +.N +.N +.N C
R1 R2 -KVT3 -KVT3 -KVT3 -KVT3
CAPDIS-S2+
/Z16.5 /Z16.5 /Z16.5 /Z16.5
14
44
54
84
-
PE
+.B +.B
LV COMPARTMENT
A A
59
60
6
8
3
5
1
-X5 -X5
library 2: PTD_M2_CoC_E
B B
WH
GY
BU
BN
YE
library 1: PTD60617
=H01-W01-A51
33
33
+.B +.B
-F501 -F601
H05V-K 1,0 GNYE
4
9
1
/Z13.1 /Z13.1
library 3:
library 4:
-XH1-A51 -XH1-A51
34
34
+.B +.B
+.F
-XH1 4 6 -XH1 7 9
Symbol
Symbol
Symbol
Symbol
-PE +.T
13
D -27DC1
D
A A A A
/Z11.2
XR152
CopyRight (C) Siemens AG 2014 All Rights Reserved
+.B B +.B B
62
61
PE
14
-X5 -X5
H07Z-K 2,5 GNYE
A A
+.B A
-XPE 7
E E
A1
A1
A1
A1
A1
A1
+.N +.N +.N +.N +.N +.N
-KVT1 -KVT2 -KVT3 -KVT4 -KVT5 -KVT6
/Z16.1 /Z16.1 /Z16.5 /Z16.1 /Z16.5 /Z16.5 NOTE:
A2
A2
A2
A2
A2
A2
K2 OPERATING PRINCIPLE
UNDERVOLTAGE < U, NORMALLY ENERGIZED OPERATION
FACTORY
AS-BUILT
+.B +.B
20L- -XH1 1 -X5 27
/M9.8
A D B A
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CONTROL
+H01 M10
Sheet 10+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 11
GAS PRESSURE INDICATION
EXTERNAL TRIP CIRCUIT BREAKER -Q0 PERMIT TO SECURED AUX. VT MEASUREMENT LAMP TEST DC SUPERVISION
INDICATION OPEN CLOSED CLOSE LOW SF6 PRESSURE VERY LOW SF6 PRESSURE DC VOLTAGE FAULT
ALARM FAULT PRESENCE
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B
30L+ -X6 1
/G1.6
110VDC B A
Translate file C: C_FB_EN.etr, 04-11-24
X1
X1
X1
X1
X1
X1
X1
X1
+.T +.T +.T +.T +.T +.T +.T +.T
B -H01 -H02 -H03 -H04 -H05 -H06 -H07 -H08 B
Translate file A: A_COC_DE
/Z14.1 /Z14.1 /Z14.1 /Z14.1 /Z14.1 /Z14.1 /Z14.4 /Z14.1
X5
X5
X5
X5
X5
X5
X5
X5
X2
X2
X2
X2
X2
X2
X2
X2
RED GREEN RED WHITE YELLOW RED WHITE RED
Translate file D: leer2
Translate file B: leer1
+.T
3
C -27DC1 +.T C
13
-LT
/Z11.2
/Z18.2
14
+.B +.B +.B +.B +.B +.B +.B
LV COMPARTMENT
A A A A A A A
XR152
4
2
8
-X6 -X6 -X6 -X6 -X6 -X6 -X6
library 2: PTD_M2_CoC_E
1
+.T
13
B B B B B B B
-27DC2
library 1: PTD60617
+.B +.B
18
19
+.T /Z11.2
3
-X6 -X6
-27DC2
Y X B
A A /Z11.2
library 3:
library 4:
XR152
=H06 =H04
XR152
33
53
33
33
21
21
13
13
13
13
PE
+.B +.B +.B +.B +.B +.B +.B +.N +.N
14
31A
Symbol
Symbol
Symbol
Symbol
D +.B A -KH01 -KLQ0 -KCBR -KSF6.1 -KBSF6.1 -KSF6.2 -KBSF6.2 -KVT5 -KVT6 D
64
+H06 -X6 +H04 -X6 H07Z-K 2,5 GNYE
1
/Z15.6 /Z15.1 /Z15.1 /Z15.6 /Z17.1 /Z15.5 /Z17.1 /Z16.5 /Z16.5
22
22
14
34
14
54
14
14
34
34
+.B A
+.T
3
-XPE 8
-74TC1
14
*
8
-K87B.1 -K50BF
/Z11.5 +.B
-PE
CopyRight (C) Siemens AG 2014 All Rights Reserved
16
32A
23
+.B +.B
XR351
65
-X6 -X6 -KXCB
1
/Z13.6
24
E E
+.B A
12
-X6
B FACTORY
+.B A +.B A +.B
AS-BUILT
10
30L- -X6 9 -X6 -X6 11
/G1.6
B Y X B B A
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CONTROL / INDICATION
+H01 M11
Sheet 11+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 12
DISCONNECTOR EARTHING SWITCH INTERLOCKING COIL BB EARTHING SWITCH
RELEASED RELEASED CB. OPER.MECHANISM BLOCKED RELEASED
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+.B +.B
13
13
-XR1 -XR1 ADJACENT PANEL
+.B C A
RIGHT SIDE
15
-XR1
BUS WIRE DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
C +.B +.B =H00 SHT /G4
16
16
-XR1 -XR1
B C A +.B B
17
Translate file A: A_COC_DE
-XR1
+.B A A
Translate file D: leer2
Translate file B: leer1
13
+.N +.B +.B
2
-XV
18
19
-KVT1 -XR1 -XR1
/Z16.1
14
C C
+.B
13
533
-XV +.N +.B A
1
-KVT4 -XQ1
B /Z16.1
14
+.D -X51
1
-Q1
EARTHED
/Z3.1
533
OFF
ON
C C
3 POS. SW.
0 534
-X51
534
+.B
-XQ1
library 2: PTD_M2_CoC_E
LV COMPARTMENT
A
library 1: PTD60617
+.B A +.B A
91
11
-XQ0 -XQ0
library 3:
library 4:
+.L -X14 +.L -X09
1
-Q0 -Q0
/Z1.1 /Z1.1 +.B A
131
13
-S1 -XQ1
830
Symbol
Symbol
Symbol
Symbol
D +.B A +.B A D
-XQ1 -XQ1 832
14
91
+.D -X11
3
-S1
EARTHED
CB.
-Q1
+.D -X84 -X85
1
131
-Q1 /Z2.1
A1
OFF
92
ON
/Z3.1
E1
E1
-Y16 -S1
-Y1 -Y5
CopyRight (C) Siemens AG 2014 All Rights Reserved
3 POS. SW.
3 POS. SW.
U
A2
E2
E2
132
CB.
-X14 -X09 -X11
0
2
-X84 -X85
0
+.B
132
833
+.B +.B +.B +.B
831
-XQ1
92
12
-XQ1 -XQ1 -XQ0 -XQ0
A
A A A A
E E
+.B B +.B B +.B B
20
15
17
-X6 -X6 16 -X6
Y X Y X
FACTORY
AS-BUILT
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
INTERLOCKING
+H01 M12
Sheet 12+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 13
BUSBAR-1 COMPT SF6 BUSBAR-1 COMPT SF6 GAS PRESSURE MONITORING BUSBAR 1
LOW PRESSURE VERY LOW PRESSURE
ALARM FAULT P<< P< P>
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
ADJACENT PANEL
+.B
7
-XR1 RIGHT SIDE
C BUS WIRE DIAGRAM
+.B
8
-XR1 =H00 SHEET /G1
C
+.B
Translate file C: C_FB_EN.etr, 04-11-24
9
-XR1
C
+.B
10
-XR1
B B
Translate file A: A_COC_DE
C
Translate file D: leer2
Translate file B: leer1
43
43
53
13
+.B +.B
-KBSF6.1 -KBSF6.2
/Z17.1 /Z17.1
14
44
44
54
BB SF6 BB SF6
ALARM FAULT
+.B
100
C A C
-XB11
-XB11
3
+.F
library 2: PTD_M2_CoC_E
LV COMPARTMENT
-B11
/Z5.2
library 1: PTD60617
4 4 4
library 3:
library 4:
-B11 -B12 -B13
Symbol
Symbol
Symbol
Symbol
D D
1 2 3 1 2 3 1 2 3
CopyRight (C) Siemens AG 2014 All Rights Reserved
-XB11
2
0
1
+.B
102
103
101
-XB11
E A A A
E
FACTORY
A1
A1
+.B +.B
-KBSF6.2 -KBSF6.1
/Z17.1 /Z17.1
AS-BUILT
A2
A2
40L+
40L-
/G1.7
/G1.7
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
BB SF6 MONITORING & SIGNALLING
+H01 M13
Sheet 13+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
*
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 14
ELECTRICAL INTERLOCKING FAULT IED-1&2 (INCOMER-1) IED-1&2 (INCOMER-1)
DISCONNECT SWITCH (-Q1) OPEN CIRCUIT BREAKER (-Q0)
INTERLOCKING DETECTION SWITCHING FAULT OVERLOAD DETECTION
OR EARTHING SWITCH ON OPEN
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
Translate file C: C_FB_EN.etr, 04-11-24
+.B B +.B B
14
61
-X6 -X7
B A A B
Translate file A: A_COC_DE
=H02 =H02
Translate file D: leer2
Translate file B: leer1
+H02 +H02
55A
57A
+.T +.T +.T
G18
H4
G6
-F31 -F31 -X5 -F31 -X5
/Z8.1 /Z8.1 /Z8.1
R14
R2 R10
+.B A +.B
151
61
-XQ0 -XQ1 -F32 -F32
D D BO11 BO35
P543
G16
G17
P 543
P 543
H3
G5
56A
58A
+.L -X13 +.D -X13
2
C +.B C
141
-Q0 -Q1 A -X5 -X5
-XQ1
/Z1.1 /Z2.1
151
63
61
-S1 -S1
3 POS. SW.
+.D -X12
3
EARTHED
31
-S1 -Q1 +.B
CB.
141
-KLQ0
/Z2.1
62
64
library 2: PTD_M2_CoC_E
OFF
/Z15.1
LV COMPARTMENT
ON
32
152
-S1 +.B +.B
A A
55
62
3 POS. SW.
library 1: PTD60617
-X7 -X7
-X13 -X13 -X13
0
2
1
B B
2 142
+.B
64
-XQ0 -X12
library 3:
library 4:
+.B B +.B B +.B B +.B B
142
+.B +.B +.B
152
4
A
6
-X9 -X9 -X9 -X9
62
-XQ0 -XQ1 -XQ1
Symbol
Symbol
Symbol
Symbol
D D D A A A A D
A A
+.B B +.B B +.B B B +.B +.B +.B +.B
24
22
23
27
28
29
30
21
-X6 -X6 -X6 -X6 -X6 -X6 -X6
*
A A A A
CopyRight (C) Siemens AG 2014 All Rights Reserved
=H06
67A
88A
48B
27A
73A
29A
75A
10A
12A
51A
21A
+H06
4A
-X40 -X40 -X5 -X5 -X5 -X5 -X5 -X5 -X5 -X5 -X5 -X5
E E
PP BUS SECTIONALIZER CUBICLE
FACTORY
AS-BUILT
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SIGNALLING ATS
+H01 M14
Sheet 14+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 15 *
ELECTRICAL
INTERLOCKING
=H06 =H06
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
+H06 +H06
+.B
35
+.B -X9
94
-X5
A
A
Translate file C: C_FB_EN.etr, 04-11-24
+.B A
7
-X9
B B
Translate file A: A_COC_DE
B +.B A
58
-X7
Translate file D: leer2
Translate file B: leer1
+.B A +.B
161
51
-XQ0 -XQ1
D D
-X13 -X14
5
3
+.L +.D
-Q0 -Q1
+.T +.T
H9
G12
EARTHED
/Z1.1 /Z2.1 -F31 -F31
161
53
51
-S1 /Z8.1 /Z8.1
OL DETECTION
OFF
C C
ON
-S1 R4 R12
3 POS. SW.
52
54
P543
162
P543
G10
G11
CB.
H7
H8
-X13 -X14
4
2
library 2: PTD_M2_CoC_E
LV COMPARTMENT
54
library 1: PTD60617
+.B +.B
162
A
52
-XQ0 -XQ1
D D
library 3:
library 4:
A
Symbol
Symbol
Symbol
Symbol
D D
+.B B +.B B
59
60
8
-X9 -X7
Y X
A A
CopyRight (C) Siemens AG 2014 All Rights Reserved
=H11
10A
12A
+H11
-X40 -X40 =H11 =H02
+H11 +.B A +H02
+.B A
7
-X9
15
E -X9 E
FACTORY
AS-BUILT
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SIGNALLING ATS
+H01 M15
Sheet 15+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 16
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A SELECTOR SWITCH CIRCUIT BREAKER DISCONNECTOR -Q1 CB PERMIT A
LOCAL REMOTE OFF ON OPEN CLOSED TO CLOSED TO TO CLOSE
BUSBAR EARTH
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
31
+.B
-KLQ1E
/Z15.1
32
43
43
43
31
61
+.B +.B +.B
43
43
31
-KS11 -KLQ0 +.B +.B -KCBR
C /Z15.1 /Z15.1
-KLQ1 -KLQ1E
/Z15.1 C
/Z16.4 /Z15.1
32
44
62
44
44
32
44
44
*
LV COMPARTMENT
library 2: PTD_M2_CoC_E
33
+.B
library 1: PTD60617
-KXCB
/Z13.6
34
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
+.B B B B B +.B B B B B B B B B B B B B
14
10
12
13
15
16
11
4
2
9
-X7 -X7
1
CopyRight (C) Siemens AG 2014 All Rights Reserved
A A A A A A A A A A A A A A A A FACTORY
AS-BUILT
=EXT
E E
+MC
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
MARSHALLING CABINET
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SIGNALLING
+H01 M16
Sheet 16+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 17
GAS PRESSURE INDICATION
CIRCUIT BREAKER & BUSBAR COMPT
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A NON SECURED AUXILIARY A
SECURED AUXILIARY VT MEASUREMENT LOW SF6 PRESSURE LOW SF6 PRESSURE
VOLTAGE OUTAGE
VOLTAGE OUTAGE FAULTY ALARM FAULT
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
+.T
8
Translate file D: leer2
Translate file B: leer1
-74TC1
/Z11.5
+.B
XR351
A
41
=H02 -X5
43
43
43
43
63
63
+H02 B +.N +.N +.B +.B +.B +.B
13
+.B -KVT5 -KVT6 -KSF6.1 -KBSF6.1 -KSF6.2 -KBSF6.2
-F151
+.T /Z16.5 /Z16.5 /Z15.6 /Z17.1 /Z15.5 /Z17.1
8
/Z12.1 +.T
44
44
44
64
44
64
-27DC1
14
-74TC2
/Z11.2
=H02/Z6.5
C C
XR152
XR351
6
6
LV COMPARTMENT
13
+.B +.T
8
library 2: PTD_M2_CoC_E
+.T
8
-F152 -27DC2
-27DC3
/Z12.1 /Z11.2
library 1: PTD60617
=H02/Z6.2
14
XR152
XR152
library 3:
library 4:
6
Symbol
Symbol
Symbol
Symbol
D +.B B +.B B
D
42
13
-X6 -X5
A
A
+.B B
17
-X7 B B B B B B B B B
24
CopyRight (C) Siemens AG 2014 All Rights Reserved
20
22
23
25
26
FACTORY
18
19
21
A
A A A A A A A A A
AS-BUILT
=EXT
E E
+MC
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
MARSHALLING CABINET
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SIGNALLING
+H01 M17
Sheet 17+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 18
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
IED-1 IED-2 IED-1 IED-1 IED-1 IED-1
33kV PRESENT CABLE SIDE 33kV PRESENT CABLE SIDE GENERAL TRIP ORDER FO COMM. FAULT PROT. INHIBITED WATCHDOG
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
+.B A
43
=H02 -X5
Translate file D: leer2
Translate file B: leer1
+H02 B
+.T +.T +.T +.T
G2
X61.14
H6
H15
H18
J12
18
-F31 -F32 -F31 -F86.1
/Z8.1 =H02/Z3.1 /Z8.1 /Z9.2
R8 BO33 R3 R6 R7
RED670
TR241
P543
P543
X61.13
H14
H13
H16
H17
J11
H5
20
G1
C C
LV COMPARTMENT
library 2: PTD_M2_CoC_E
library 1: PTD60617
+.B B
44
-X5
library 3:
library 4:
A
Symbol
Symbol
Symbol
Symbol
D D
+.B B B B B B B B B B B B B
34
CopyRight (C) Siemens AG 2014 All Rights Reserved
27
28
29
30
32
33
35
36
37
38
31
-X7
A A A A A A A A A A A A
=EXT
E E
+MC
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
FACTORY
MARSHALLING CABINET
AS-BUILT
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SIGNALLING
+H01 M18
Sheet 18+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 19
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
IED-2 IED-2 IED-2 IED-2 SPARE IED-1 IED-2
GENERAL TRIP ORDER FO COMM. FAULT PROT. INHIBITED WATCHDOG CONNECTION BF TRIP (50BF) BF TRIP (50BF)
Translate file C: C_FB_EN.etr, 04-11-24
=H02 =H02
+H02 +H02
+.B A
53
B -X5 B
Translate file A: A_COC_DE
B
Translate file D: leer2
Translate file B: leer1
+.T
X61.11
-F32
+.T +.T +.T =H02/Z3.1
X61.2
X61.5
X61.8
18
G9
-F32 -F86.2 -F31
=H02/Z3.1 =H02/Z4.2 /Z8.1 BO31 BO32
RED670
R11
31
B025 B026 B027 B028 B029 B030 +.B
-K32
X61.10
X61.12
RED670
TR241
=H02/Z7.1
P543
32
X61.4
X61.3
X61.6
X61.7
X61.9
X61.1
G7
G8
20
C C
LV COMPARTMENT
+.B B B B B B B B B
45
46
47
48
49
50
52
51
library 2: PTD_M2_CoC_E
-X5
+.B B
54
library 1: PTD60617
A A A A A A A A -X5
A
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
+.B B B B B B B B B B B B B
44
40
42
43
45
46
47
48
49
CopyRight (C) Siemens AG 2014 All Rights Reserved
39
50
52
FACTORY
41
51
-X7
A A A A A A A A A A A A A A
AS-BUILT
=EXT
E E
+MC
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
MARSHALLING CABINET
F F
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SIGNALLING
+H01 M19
Sheet 19+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / S / M / 20
FBSTP2
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
SPARE CONNECTION SPARE CONNECTION
*
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
C C
LV COMPARTMENT
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
REFER TO SHEET /M14
+.B +.B B
54
64
CopyRight (C) Siemens AG 2014 All Rights Reserved
53
56
57
63
-X7 -X7
A A A A
=EXT
E E
+MC
XX
XX
XX
XX
X X
FACTORY
MARSHALLING CABINET
AS-BUILT
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SIGNALLING
+H01 M20
Sheet 20+
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / M / 21
S P A R E C O N T A C T S
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
*
Translate file C: C_FB_EN.etr, 04-11-24
B +.B +.B +.B B
Translate file A: A_COC_DE
15
18
13
11
-X9
9
-X9 -X9
1
Translate file D: leer2
Translate file B: leer1
B B B B B B
+.T +.N +.N
14
17
11
11
-F86.1 -F27.1 -F27.2
/Z9.2 /Z17.6 /Z17.6
K1 K1
TR241
VMD420
VMD420
14
14
16
19
12
12
C C
+.B B +.B B B B +.B B B B B
20
16
17
19
14
10
12
-X9
2
-X9 -X9
REFER TO SHEET /M14.
LV COMPARTMENT
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
+.B
23
25
21
-X9
Symbol
Symbol
Symbol
Symbol
D B B B D
+.T +.T +.T
4
-74TC1 -27DC1 -27DC2
/Z11.5 /Z11.2 /Z11.2
CopyRight (C) Siemens AG 2014 All Rights Reserved
XR351
XR152
XR152
2
+.B B B B +.B
24
34
22
26
27
28
29
30
32
33
35
31
E -X9 -X9 E
B B B B B B B B B
FACTORY
AS-BUILT
F F
* RETROFITTING OF PP MV SWBD
ALL UNIDENTIFIED WIRES H07Z-K 1,5 GY
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SPARES
+H01 M21
Sheet 21-
909611 (3)2-RMPP-6H2-SH015-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 21 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / S / S / 1
FBSTP2
CT Protection Core
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
1S3
1S3
1S3
HV COMP.
T1/1: +.F +.F +.F
-T1L1 1S2 -T1L2 1S2 -T1L3 1S2
1250-800/1A /Z7.1 /Z7.1 /Z7.1
CL 5P20, 45-30VA
1S1
1S1
1S1
Rct<=8-5 Ohms
Vk=1200-800V
Translate file C: C_FB_EN.etr, 04-11-24
YE
YE
YE
YE
YE
YE
YE
YE
YE
MAIN-1
H07V-K 4,0
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
+.B NOTE:
-XPE
1
H07Z-K 4,0 GNYE 1. FOR SHORTING AND EARTHING OF CT CORE
B
CLOSE TB's 112, 122, 132 AND OPEN 111, 121, 131, 135
C90
124
134
+.B +.B +.B
122
132
135
123
133
114
B B B B B B B B B B B B B
112
121
131
113
111
-X1A -X1A -X1A
2. FOR SERVICE CONDITION OF CT CORE AT 1250A TAP
YX YX YX B
CLOSE TB's 111, 114, 121, 124, 131, 134, 135 AND
OPEN TB's 112, 113, 122, 123, 132, 133
C90
124
134
+.B +.B +.B
122
132
135
123
133
114
112
121
131
113
111
-X1A -X1A -X1A 3. FOR SERVICE CONDITION OF CT CORE AT 800A TAP
A YX A A YX A A YX A A CLOSE TB's 111, 113, 121, 123, 131, 133, 135 AND
C A Y A Y A Y A X X X C
OPEN TB's 112, 114, 122, 124, 132, 134
CT TAP CT RATIO
LV COMPARTMENT
library 2: PTD_M2_CoC_E
1S1 - 1S3 1250/1A
library 1: PTD60617
1S1 - 1S2 800/1A
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
+.T
21
23
25
27
-S31
2RMLG02
/Z10.6
24
PE
22
26
28
CopyRight (C) Siemens AG 2014 All Rights Reserved
H07Z-K 2,5 GNYE
+.B B
3
-XPE
+.T
C1
C2
C3
C4
C5
C6
C7
C8
C9
5A C13
C14
1A C15
E -F31
E
5A
5A
5A
/Z8.1
1A
1A
1A
P543
FACTORY
Ia
Ib
In
Ic
AS-BUILT
F F
ALL UNIDENTIFIED WIRES H07Z-K 2,5 YE
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
+H01 S1
Sheet 1+
909611 (3)2-RMPP-6H2-SH016-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 7 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / S / 2
CT Protection Core
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
2S3
2S3
2S3
HV COMP.
T1/2: +.F +.F +.F
-T1L1 2S2 -T1L2 2S2 -T1L3 2S2
1250-800/1A /Z7.1 /Z7.1 /Z7.1
CL 5P20, 45-30VA
2S1
2S1
2S1
Rct<=8-5 Ohms
Vk=1200-800V
Translate file C: C_FB_EN.etr, 04-11-24
YE
YE
YE
YE
YE
YE
YE
YE
YE
MAIN-2
H07V-K 4,0
B B
Translate file A: A_COC_DE
+.B
2
-XPE
Translate file D: leer2
Translate file B: leer1
H07Z-K 4,0 GNYE
B NOTE:
C90
124
134
+.B +.B +.B
122
132
135
123
133
114
B B B B B B B B B B B B B
112
121
131
113
111
-X1B -X1B -X1B
1. FOR SHORTING AND EARTHING OF CT CORE
YX YX YX B
CLOSE TB's 112, 122, 132 AND OPEN 111, 121, 131, 135
2. FOR SERVICE CONDITION OF CT CORE AT 1250A TAP
C90
124
134
+.B +.B +.B
122
132
135
123
133
114
112
121
131
113
111
-X1B -X1B -X1B CLOSE TB's 111, 114, 121, 124, 131, 134, 135 AND
A YX A A YX A A YX A A OPEN TB's 112, 113, 122, 123, 132, 133
A Y A Y A Y A X X X
3. FOR SERVICE CONDITION OF CT CORE AT 800A TAP
CLOSE TB's 111, 113, 121, 123, 131, 133, 135 AND
C OPEN TB's 112, 114, 122, 124, 132, 134 C
CT TAP CT RATIO
LV COMPARTMENT
library 2: PTD_M2_CoC_E
2S1 - 2S3 1250/1A
library 1: PTD60617
2S1 - 2S2 800/1A
library 3:
library 4:
=H02
+H02
Symbol
Symbol
Symbol
Symbol
D D
+.B +.B +.B
135
A A A A
121
131
111
-X1B -X1B -X1B
B B B B
CopyRight (C) Siemens AG 2014 All Rights Reserved
+.T
21
23
25
27
-S32
2RMLG02
=H02/Z5.6
24
PE
22
26
28
H07Z-K 2,5 GNYE
+.B B
4
-XPE
E E
+.T
X401.2
X401.1
X401.4
X401.3
X401.6
X401.5
X401.8
X401.7
-F32
=H02/Z2.1
FACTORY
3L0
I L2
I L3
RED 670
I L1
AS-BUILT
F F
ALL UNIDENTIFIED WIRES H07Z-K 2,5 YE
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
+H01 S2
Sheet 2+
909611 (3)2-RMPP-6H2-SH016-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 7 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / S / 3 CT Protection core
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
T1/3:
1250/1A
CL 5P20, 25VA
3S1
3S1
3S1
+.F +.F +.F
Rct<=3 Ohms -T1L1 -T1L2 -T1L3
HV COMP.
87B /Z7.1 /Z7.1 /Z7.1
3S2
3S2
3S2
YE
YE
YE
YE
YE
YE
H07V-K 4,0
Translate file C: C_FB_EN.etr, 04-11-24
B +.B B
Translate file A: A_COC_DE
5
-XPE
Translate file D: leer2
Translate file B: leer1
B H07Z-K 4,0 GNYE
B90
+.B
120
114
B B B B B B B B B B
112
113
115
116
117
118
119
121
111
-X1C NOTE:
YX YX YX BB YX ZZ
1. FOR SHORTING AND EARTHING OF CT CORE
CLOSE TB's 111, 113, 115 AND OPEN 112, 114, 116, 117
B90
+.B
120
114
112
113
115
116
117
118
119
121
111
-X1C 2. FOR SERVICE CONDITION OF CT CORE
YX YX Y X CLOSE TB's 112, 114, 116, 117 AND OPEN 111, 113, 115
A A A A A A A A A A A
C C
+.B A +.B A +.B A
10
11
5
9
-X1CA -X1CA -X1CA
YX YX YX
B B B B B B B H07Z-K 1,5 YE
library 2: PTD_M2_CoC_E
LV COMPARTMENT
library 1: PTD60617
+.B
113
213
115
227
117
225
-KCT
/Z14.5
library 3:
library 4:
RXMVB 2
Symbol
Symbol
Symbol
Symbol
D D
228
226
214
114
116
118 H07Z-K 1,5 YE
+.B B B B
14
12
13
-X1CA
CopyRight (C) Siemens AG 2014 All Rights Reserved
Y X Y X A
A
+.B B B B B
4
2
-X1CA
1
E E
+.B
4
2
-X1CA
1
A A A A
=H06
FACTORY
+H06
4A
2A
3A
1A
-X1A -X1A -X1A -X1A
AS-BUILT
F F
ALL UNIDENTIFIED WIRES H07Z-K 2,5 YE
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
+H01 S3
Sheet 3+
909611 (3)2-RMPP-6H2-SH016-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 7 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / S / 4
=H02 Line Voltage Transformer
(Wdg-1)
=H02
VT
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
-T5/1
HV COMP.
+.F +.F +.F
1n
1n
1n
33kV 110V
-T5L1 -T5L2 -T5L3
3 3 =H02/Z1.2 =H02/Z1.2 =H02/Z1.2
1a
1a
1a
25VA Cl. 0,2/3P
H07V-K 4,0 RD
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
504
502
506
507
+.B A A A
-X2A
Y X Y X Y X
504
502
506
507
503
505
+.B +.B +.B
501
A A A
-X2A B -X2A B -X2A B B H07Z-K 2.5 GNYE
+.B B
7
-XPE
503
505
+.B
501
-X2A
B B B
C C
+.B
-X2A 508
B Y
LV COMPARTMENT
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
+.B +.B
3
5
1
1
-F501 -F502
/Z13.1 /Z13.1
3A 3A
CopyRight (C) Siemens AG 2014 All Rights Reserved
I > I > I > I > I > I >
2
6
509
514
+.B +.B +.B
510
512
513
515
516
517
B B B B B B B B B
511
E -X2A -X2A -X2A
E
A A A A A A A A A
+.N
L1
L2
L3
-F27.1
V1L4
V1L2
V1L3
V1L1
SPARE
/Z17.6 FACTORY
VL2
VL3
VL1
/S6.2
AS-BUILT
VMD420
F F
ALL UNIDENTIFIED WIRES H07Z-K 2,5 RD
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
+H01 S4
Sheet 4+
909611 (3)2-RMPP-6H2-SH016-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 7 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20 =H02
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / S / 5
Line Voltage Transformer
+H02
(Wdg-2)
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
VT +.F +.F +.F
2n
2n
2n
-T5L1 -T5L2 -T5L3
-T5/2
=H02/Z1.2 =H02/Z1.2 =H02/Z1.2
33kV 100V
2a
2a
2a
HV COMP.
3 3 H07V-K 4,0 RD
25VA Cl. 0,2/3P
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
604
Translate file B: leer1
602
606
607
+.B A A A
-X2B
Y X Y X Y X
604
602
606
607
603
605
+.B +.B +.B
601
A A A
-X2B B -X2B B -X2B B B H07Z-K 2.5 GNYE
+.B B
8
-XPE
603
605
+.B
601
-X2B
B B B
608
+.B
-X2B
C B C
LV COMPARTMENT
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
+.B +.B
3
5
1
1
-F601 -F602
/Z13.1 /Z13.1
3A 3A
I > I > I > I > I > I >
CopyRight (C) Siemens AG 2014 All Rights Reserved
6
609
614
+.B +.B +.B
610
612
613
615
616
617
B B B B B B B B B
611
-X2B -X2B -X2B
E E
A A A A A A A A A
SPARE
+.N
L1
L2
L3
-F27.2
V2L4
V2L2
V2L3
V2L1
/Z17.6 FACTORY
VL2
VL3
VL1
AS-BUILT
/S6.6
VMD420
F F
ALL UNIDENTIFIED WIRES H07Z-K 2,5 RD
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
+H01 S5
Sheet 5+
909611 (3)2-RMPP-6H2-SH016-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 7 Sh.
1 2 3 4 5 6 7 8
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / S / 6
LV COMPARTMENT
1
1
As Manuf
Revision Modification
Retrofitting
Date
19.01.20
04.10.17
GN
GN
/Z8.1
-F31
+.T
/Z10.6
-S31
+.T
Date
2RMLG02
Name Norm
Appr.
Drawn
P543
2
2
GN
HEB
SAG
C19 2 1 V1L1
05.03.17
VL1
C20 4 3 V1L2
VL2
/S4.2
3
3
Orig./Prep.for/Prep.by
RIYADH METRO PP6H2
C21 6 5 V1L3
RIYADH, SAUDI ARABIA
KING ABDULAZIZ PROJECT
VL3
C22 8 7 V1L4
4
4
+H02
=H02
Siemens AG
5
5
=H02/Z5.6
-S32
+.T
+.T
=H02/Z2.1
-F32
Circuit diagram
2RMLG02
RED 670
VA
-X2B
+.B
-X2B
+.B
X401.20 X401.19 2 1 618 618 V2L1
B
B
A
A
TRANSFORMER CIRCUITS
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR
VB
6
6
X401.22 X401.21 4 3 619 619 V2L2
B
B
A
A
/S5.2
909611
VC
X401.24 X401.23 6 5 620 620 V2L3
B
B
A
A
Customer Dwg. No.
7
7
8 7 621 621 V2L4
B
B
A
A
=HZ01
(3)2-RMPP-6H2-SH016-*
ALL UNIDENTIFIED WIRES H07Z-K 2,5 RD
S
+H01
=H01
8
8
FACTORY
S6
AS-BUILT
Sheet 6+
7 Sh.
F
E
D
C
B
A
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / S / 7
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
Translate file C: C_FB_EN.etr, 04-11-24
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
C L1 L2 L3
C
-C1L1 -C1L2 -C1L3
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
+.F
L1
L2
L3
X
-A51
/Z6.1
CopyRight (C) Siemens AG 2014 All Rights Reserved
L1 L3
E E
CAPDIS-S2+
L2
H07Z-K 4,0 GNYE
+.B A FACTORY
4
2
-XPE
1
+.B
-PE AS-BUILT
F F
ALL UNIDENTIFIED WIRES H07Z-K 2,5 YE
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
TRANSFORMER CIRCUITS
+H01 S7
Sheet 7-
909611 (3)2-RMPP-6H2-SH016-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Circuit diagram 7 Sh.
1 2 3 4 5 6 7 8
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 1
*
-Q0
+.L
1
1
CIRCUIT BREAKER 3AH49 8DAB
As Manuf
867-3025.5C
Revision Modification
Retrofitting
-M1
-XQ0
+.B
-X12
-S11
-S22
-S21
-S10
-X12
-XQ0
+.B
28 8 22 21 21 22 D2(-) A1(+) 22 21 22 21 9 27
M
DC
/G1.5 MOTOR OP. MECH.
B
B
Date
19.01.20
04.10.17
-K1
-S3
-X11
GN
GN
U
A2 A1 22 21 7 19
B
-K1
RETROFITTING OF PP MV SWBD
14 13
Date
Name Norm
Appr.
FACTORY
Drawn
AS-BUILT
1) OPERATES WHEN CB. TRIP IS NOT LOCKED OUT
-Y9
4)
2
2
-X11
-S12
-K1
-S1
GN
HEB
8 9
SAG
18 14 13 A2 A1 32 31 22 21 12 11 17
/M2.7 CLOSING
B
B
05.03.17
U
4 22
SEALABLE
B
MANUAL ON
MANUAL OFF
-Y1
-S1
21 5 A2 A1 24 23 6 20
/M3.4 FIRST SHUNT RELEASE
B
B
-X13
U 7 45
B
3
3
-Y2
-X12
-S1
-X12
Orig./Prep.for/Prep.by
RIYADH METRO PP6H2
34 2 A2 A1 34 33 3 33
RIYADH, SAUDI ARABIA
=H02/M1.4 SECOND SHUNT RELEASE
B
B
KING ABDULAZIZ PROJECT
U
-Y7
3) OPERATES WHEN NO TRIPPING
-X13
-R1
-X13
44 8 2 1 D2 D1 9 43
/M4.3 UNDERVOLTAGE RELEASE
B
B
-S1
U 6
44 43 46
2) OPERATES WHEN MECH. OFF IS NOT PRESSED
B
4
4
-X08
-R01
-X08
10 0 2 1 1 9
/G2.3 HEATER
B
B
-X10
-S16
-X10
1)
14 2 14 13 3 13
/M3.3 CB. OPER.MECHANISM UNLOCKED
B
B
16 0 22 21 1 15
CB. OPER.MECHANISM BLOCKED
B
B
*
-X11
-S41
-X11
24 2 14 13 3 23
/M9.4 MECHANISM CHARGED
B
B
Siemens AG
-S42
26 0 22 21 1 25
MECHANISM NOT CHARGED
B
B
5
5
-X12
-S6
-S7
-X12
3)
2)
30 6 21 22 14 13 7 29
B C.B. TRIPPING SIGNAL
B
-S1
32 4 32 31 5 31
Equipment Diagram
/M3.5 OFF
B
B
CIRCUIT BREAKER
42 0 42 41 1 41
/M9.5 OFF
B
B
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR
-X13
-X13
52 4 52 51 5 51
/M15.2 OFF
B
B
6
6
54 3 54 53
/M15.3 ON
B
62 1 62 61 2 61
/M14.2 OFF
B
B
64 0 64 63
/M14.2 ON
B
-X14
-X14
909611
72 8 72 71 9 71
=H02/M1.5 OFF
B
B
74 6 74 73 7 73
=H02/M1.6 ON
B
B
Customer Dwg. No.
82 4 82 81 5 81
/M7.2 OFF
B
B
84 2 84 83 3 83
/M7.2 ON
B
B
92 0 92 91 1 91
/M12.4 OFF
B
B
7
7
-X15
-X15
94 8 94 93 9 93
/M3.5 ON
B
B
102 6 102 101 7 101
/M6.2 OFF
B
B
104 4 104 103 5 103
/M6.3 ON
B
B
112 2 112 111 3 111
=H02/M3.2 OFF
B
B
4) INTERLOCKING OF ELECTRICAL CLOSING OF THE CB IN CASE OF MANUAL OPERATION OF THE THREE-POSITION SWITCH
=HZ01
(3)2-RMPP-6H2-SH017-*
114 0 114 113 1 113
ALL UNIDENTIFIED WIRES H07V-K 1,5 BK
=H02/M3.2 ON
B
B
S
-X16
-X16
122 0 122 121 1 121
OFF
B
B
+H01
=H01
-X17
-X17
124 0 124 123 1 123
8
8
ON
B
B
-Y16
-X09
-X09
12 0 A2 A1 14 13 1 11 INTERLOCKING COIL
/M12.5
B
B
CB. OPER.MECHANISM BLOCKED
Z1
U
Sheet 1+
18 Sh.
F
E
D
C
B
A
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 2
-Q1
+.D
SIEMENS
THREE POSITION SWITCH 8DA
1
1
867-3517.5B
As Manuf
Revision Modification
Retrofitting
Date
H07V-K 1,5 BK
19.01.20
04.10.17
1) SHOWN WITH LEVER INSERTED
GN
GN
ALL UNIDENTIFIED WIRES
ON
Date
Name Norm
OFF
Appr.
Drawn
EARTHED
2
2
-XQ1
+.B
-X11
-S1
GN
-X11
-XQ1
+.B
HEB
8
SAG
112 112
/M6.4 9
B
111 111
OPEN
05.03.17
113
114 7 114
/M6.4
B
CLOSED
122 5 122
6
B
121 121
OPEN
B
123
124 4 124
B
CLOSED
132 2 132
/M12.6 3
B
131 131
OPEN
3
3
133 1 133
0
B
134 134
/M1.4
Orig./Prep.for/Prep.by
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
CLOSED
-X12
KING ABDULAZIZ PROJECT
-X12
142 2 142
/M14.3 3
B
141 141
DISCONNECTOR
OPEN
143 1 143
0
B
144 144
B
CLOSED
-X13
-X13
152 2 152
/M14.2 3
B
151 151
OPEN
153 1 153
0
B
154 154
B
CLOSED
4
4
-X14
-X14
162 2 162
/M15.4 3
B
161 161
OPEN
163 1 163
0
B
164 164
B
CLOSED
-X15
-X15
172 2 172
3
B
171 171
OPEN
173 1 173
0
B
174 174
B
CLOSED
Siemens AG
FACTORY
AS-BUILT
5
5
Equipment Diagram
THREE POSITION SWITCH
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR
6
6
1)
-X82
-S25
-X82
816 2 14 13 3 815
B
B
NOT PLUGGED
909611
818 0 22 21 1 817
B
B
OPERATING KEY
INSERTED
Customer Dwg. No.
7
7
=HZ01
(3)2-RMPP-6H2-SH017-*
S
+H01
=H01
8
8
Z2
/Z3.1
Sheet 2+
18 Sh.
F
E
D
C
B
A
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 3
-Q1
+.D
1
1
As Manuf
8DA
Revision Modification
Retrofitting
/Z2.8
867-3517.5B
H07V-K 1,5 BK
Date
19.01.20
04.10.17
GN
GN
ALL UNIDENTIFIED WIRES
-Y1
-XQ1
+.B
-X84
-X84
-XQ1
+.B
Date
Name Norm
Appr.
Drawn
831 0 E2 E1 1 830
/M12.2
B
B
2
2
GN
DISCONNECTOR
HEB
SAG
05.03.17
U
-Y5
-X85
-X85
INTERLOCKING COIL
833 0 E2 E1 1 832
/M12.3
B
B
EARTHING SWITCH
3
3
Orig./Prep.for/Prep.by
ON
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
OFF
KING ABDULAZIZ PROJECT
EARTHED
-S1
-X51
-X51
511 9 511
8
B
512 512
/M6.5
B
OPEN
514 7 514
/M6.6
B
513
CLOSED
521 6 521
5
B
522 522
/M5.5
4
4
OPEN
524 4 524
/M5.6
B
523
CLOSED
531 3 531
2
B
532 532
B
OPEN
534 0 534
/M12.5 1
B
533 533
B
CLOSED
-X52
Siemens AG
-X52
541 3 541
2
B
542 542
/M3.2
B
EARTHING SWITCH
OPEN
5
5
544 0 544
/M3.7 1
B
543 543
B
CLOSED
-X53
-X53
Equipment Diagram
551 3 551
2
B
552 552
=H02/M1.3
B
OPEN
554 0 554
=H02/M1.8 1
B
553 553
B
THREE POSITION SWITCH
CLOSED
-X54
-X54
561 3 561
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR 2
B
562 562
B
OPEN
6
6
564 0 564
1
B
563 563
B
CLOSED
-X55
-X55
571 3 571
2
B
572 572
B
OPEN
909611
574 0 574
1
B
573 573
B
CLOSED
Customer Dwg. No.
7
7
=HZ01
FACTORY
AS-BUILT
(3)2-RMPP-6H2-SH017-*
S
+H01
=H01
8
8
Z3
Sheet 3+
18 Sh.
F
E
D
C
B
A
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 4 GAS PRESSURE MONITORING
CIRCUIT BREAKER -Q0
P<< P< P>
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
PLEASE NOTE:
MANOMETER WITH 3 ALARM CONTACTS (OPTION)
CONTACT 1: UNDERPRESSURE P<<
Translate file C: C_FB_EN.etr, 04-11-24
CONTACT 2: UNDERPRESSURE P<
CONTACT 3: OVERPRESSURE P>
B B
Translate file A: A_COC_DE
/M5.7
Translate file D: leer2
Translate file B: leer1
890
+.B
-XQ1
-X88
3
+.D
-B0
C 4
C
-B0
library 2: PTD_M2_CoC_E
THREE POSITION SWITCH
1 2 3
library 1: PTD60617
867-3341.5A
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
-X88
2
0
1
892
893
+.B
891
B B B
-XQ1
CopyRight (C) Siemens AG 2014 All Rights Reserved
/M5.7
/M5.7
/M5.8
E E
FACTORY
AS-BUILT
F F
ALL UNIDENTIFIED WIRES H07V-K 1,5 BK
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
CB SF6 Pressure Monitoring
+H01 Z4
Sheet 4+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 5 GAS PRESSURE MONITORING BUSBAR 1
P<< P< P>
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
PLEASE NOTE:
MANOMETER WITH 3 ALARM CONTACTS (OPTION)
CONTACT 1: UNDERPRESSURE P<<
Translate file C: C_FB_EN.etr, 04-11-24
CONTACT 2: UNDERPRESSURE P<
CONTACT 3: OVERPRESSURE P>
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
/M13.4
+.B
100
-XB11
B
H07V-K 1,5 BK
-XB11
3
+.F
-B11
C C
library 2: PTD_M2_CoC_E
4 4 4
-B11 -B12 -B13
library 1: PTD60617
library 3:
library 4:
1 2 3 1 2 3 1 2 3
Symbol
Symbol
Symbol
Symbol
D D
867-3347.5B
CopyRight (C) Siemens AG 2014 All Rights Reserved
-XB11
2
0
1
H07V-K 1,5 BK
+.B
102
103
B B B
101
-XB11
/M13.4
/M13.5
/M13.5
E E
FACTORY
AS-BUILT
F F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
BB SF6 Pressure Monitoring
+H01 Z5
Sheet 5+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 6
Relaisfunktionen Definitinon der Relaisfunktion abgeleitet aus Relaiszustände MEASURING LEAD Relay Function for Definitinon of relay funktion derived from Relay status
SELECT.
nur CAPDIS-S2+ den Anzeigebereichen nach IEC 61243-5 CAPDIS-S2+ indication ranges according to IEC 61243-5
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A PRODUCT WIRE TYPE CROSS-SECTION A
Fehler Hilfsspannung fehlt, Relais 1 Aus Fault Aux. voltage missing, Relay 1 off
8DH H07V-K 1,5 qmm
interner Fehler oder Leiterbruch Relais 2 Aus internal fault or broken signal lead Relay 2 off
Simosec COAX.CABLE RG58
v v v v
Spannung vorhanden UL1 UL2 UL3 > 0,45xUn und Hilfsspannung vorhanden Relais 1 Ein NXPlus COAX.CABLE RG58 Voltage present UL1 UL2 UL3 > 0,45xUn and aux.volt. present Relay 1 on
Relais 2 Aus NXPlusC COAX.CABLE RG58 Relay 2 off
v v 8DA COAX.CABLE RG58 v v
Spannungsfrei UL1 UL2 UL3 < 0,1xUn und Hilfsspannung vorhanden Relais 1 Aus No Voltage present UL1 UL2 UL3 < 0,1xUn and aux.volt. present Relay 1 off
8DB COAX.CABLE RG58
Relais 2 Ein Relay 2 on
Translate file C: C_FB_EN.etr, 04-11-24
Erdschluss, Asymmetrie UL1 v UL2 v UL3 > 0,45xUn und Hilfsspannung vorhanden Relais 1 Ein Earth fault, asymmetry UL1 v UL2 v UL3 > 0,45xUn and aux.volt. present Relay 1 on
& UL1 v UL2 v UL3 < 0,1xUn und Hilfsspannung vorhanden Relais 2 Ein & UL1 v UL2 v UL3 < 0,1xUn and aux.volt. present Relay 2 on
WIRE LENGTH DEP. ON DESIGN
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
+.F
-A51
L1 L2 L3
L2
ATTENTION: THE ANNUCIATION CONTACT IS UNSUITABLE
FOR WIRING DIRECTLY TO THE INTERLOCKING COILS
C C
LC DISPLAY
-R1
library 2: PTD_M2_CoC_E
library 1: PTD60617
L1 L3 SENSOR/
LOGIC
-R2
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
24V DC + -
730-0401.5H
CAPDIS-S2+
IN+ IN-
E 24...230V AC/DC
E
~/+
~/-
PE
L2
L3
L1
7
X
/M10.2
WH
GY
RD
BU
BN
YE
GN
PK
/S7.7
/S7.7
/S7.8
/S7.8
=H01-W01-A51
OR LIYY 8x0,25
+.B
4
9
0
-XH1-A51
1
FACTORY +.B B B B B B B B B B B
10
4
2
3
-XH1
1
AS-BUILT
/M10.4
/M10.4
/M10.4
/M10.2
/M10.2
/M10.3
/M10.3
/M10.3
L1 L2 L3
F F
WITH SIGNAL-LEAD TEST WITHOUT SIGNAL-LEAD TEST
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
Capdis S2+
+H01 Z6
Sheet 6+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 7
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
3S1
2S1
1S1
2S2
1S2
3S2
2S3
1S3
Translate file C: C_FB_EN.etr, 04-11-24
/S3.3
/S2.2
/S1.2
4MC4_90
+.F C1: 1250-800/1A,CL 5P20, 45-30VA,Rct<=8-5 Ohms,Vk=1200-800V,MAIN-1
B B
Translate file A: A_COC_DE
-T1L1 C2: 1250-800/1A,CL 5P20, 45-30VA,Rct<=8-5 Ohms,Vk=1200-800V,MAIN-2
C3: 1250/1A,CL 5P20, 25VA,Rct<=3 Ohms,87B
Translate file D: leer2
Translate file B: leer1
CURRENT TRANSFORMER, -T1
/S3.3
/S2.3
/S1.3
4MC4_90
+.F C1: 1250-800/1A,CL 5P20, 45-30VA,Rct<=8-5 Ohms,Vk=1200-800V,MAIN-1
-T1L2 C2: 1250-800/1A,CL 5P20, 45-30VA,Rct<=8-5 Ohms,Vk=1200-800V,MAIN-2
C3: 1250/1A,CL 5P20, 25VA,Rct<=3 Ohms,87B
CURRENT TRANSFORMER, -T1
/S3.4
/S2.3
/S1.4
4MC4_90
+.F C1: 1250-800/1A,CL 5P20, 45-30VA,Rct<=8-5 Ohms,Vk=1200-800V,MAIN-1
-T1L3 C2: 1250-800/1A,CL 5P20, 45-30VA,Rct<=8-5 Ohms,Vk=1200-800V,MAIN-2
C3: 1250/1A,CL 5P20, 25VA,Rct<=3 Ohms,87B
C CURRENT TRANSFORMER, -T1 C
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
FACTORY
AS-BUILT
F F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
PRIMARY DEVICE
+H01 Z7
Sheet 7+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 8
*
-F31
+.T
ALSTOM
1
1
PROTECTION RELAY
GNX:P543-91NC7M0760M 5A
As Manuf
C1
/S1.2
Revision Modification
Retrofitting
Ia C2
/S1.2
J11
/M18.6 1A C3
J12 WATCHDOG CONTACT /S1.2
/M18.6
Date
5A C4
19.01.20
/S1.2
04.10.17
J13 Ib C5
/S1.3
GN
GN
WATCHDOG CONTACT
PHASE
J14
1A C6
/S1.3
CURRENT INPUT
5A C7
H1 /S1.3
/M4.7
Date
RETROFITTING OF PP MV SWBD
R1 Ic
Name Norm
H2 C8
Appr.
Drawn
/M4.7 /S1.3
*
1A C9
/S1.4
2
2
GN
H3
HEB
/M14.6 5A
SAG
C10
H4 R2 IED-1 SWITCHING
/M14.6
05.03.17
FAULT Im C11
MUTUAL
H5 1A C12
/M18.4
H6 R3
/M18.4 5A C13
/S1.4
*
In C14
H7 /S1.4
/M15.5
NEUTRAL
H8 1A C15
/M15.5 R4 IED-1 OVERLOAD /S1.4
H9
/M15.5 DETECTION (NC)
H10
/M3.4
3
3
H11 VA C19
/M3.5 R5 /S6.2
Orig./Prep.for/Prep.by
H12
RIYADH METRO PP6H2
/M3.5
RIYADH, SAUDI ARABIA
VB C20
KING ABDULAZIZ PROJECT
/S6.3
H13
/M18.5
H14
/M18.5 R6 VC C21
COMMAND RELAY
H15 /S6.3
/M18.5
VOLTAGE INPUTS
VN C22
H16 /S6.4
/M18.6
H17
/M18.6 R7
H18
/M18.6 V(BUS) C23
4
4
G1
/M18.2 C24
G2 R8
/M18.2
G3
=H02/M5.4
G4 R9
=H02/M5.4 - D1
/M7.2
*
OPTO1 + D2
/M7.2
G5
/M14.7 - D3
G6 R10 IED-1 OVERLOAD /M7.2
/M14.7 OPTO2 + D4
DETECTION /M7.2
Siemens AG
- D5
G7 /M7.3
/M19.6 OPTO3 + D6
G8 /M7.3
/M19.6 R11
5
5
G9 - D7
/M19.6 /M7.4
OPTO4 + D8
*
/M7.4
G10 - D9
/M15.6 /M7.5
Equipment Diagram
G11 OPTO5 + D10
/M15.7 R12 IED-1 INTERLOCKING /M7.5
G12
/M15.7 FAULT (NC) - D11
/M7.5
SECONDARY DEVICE
OPTO6 + D12
/M7.5
G13
/M1.2 - D13
G14 /M7.6
/M1.2 R13 OPTO7 + D14
G15 /M7.6
/M1.2
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR - D15
/M7.7
OPTO8 + D16
G16 /M7.7
/M14.5
6
6
G17 D17
/M14.5 R14
G18 COMMON D18
/M14.5
- F1
/M7.7
OPTO9 + F2
/M7.7
- F3
909611
/M8.2
BINARY INPUTS
OPTO10 + F4
/M8.2
- F5
/M8.2
Customer Dwg. No.
J17 - OPTO11 + F6
COMMUNICATION /M8.2
J18 + OPTION - F7
/M8.3
OPTO12 + F8
J16 /M8.3
7
7
SCN - F9
/M8.4
OPTO13 + F10
/M8.4
- F11
/M8.6
OPTO14 + F12
/M8.6
- F13
IRIG-B PORT /M8.6
=H02/M8.3 OPTO15 + F14
IRIG-B /M8.6
=HZ01
(3)2-RMPP-6H2-SH017-*
- F15
/M8.7
OPTO16 + F16
S
/M8.7
F17
COMMON F18
+H01
=H01
8
8
FACTORY
AS-BUILT
L- J1
/M8.8
L+ J2
/M8.8
POWER
SUPPLY
Z8
PE
/M8.7
Sheet 8+
18 Sh.
F
E
D
C
B
A
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 9
1
1
As Manuf
Revision Modification
Retrofitting
Date
19.01.20
04.10.17
GN
GN
TR241, 4NO+6NC,110V DC
LOCKOUT RELAY
-F86.1
+.T
Date
Name Norm
Appr.
Drawn
7PG1524-1EG60-1AF0
2
2
RL1
GN
HEB
SAG
28 27
/M4.7 /M4.7
05.03.17
R1
PE
/M4.7
RESET
26 25
/M4.7 /M4.7
3
3
3 1
/M1.4 /M1.4
Orig./Prep.for/Prep.by
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
KING ABDULAZIZ PROJECT
4 2
7 5
/M8.4 /M8.4
4
4
8 6
11 9
=H02/M4.2 =H02/M4.2
12 10
/M3.5 /M3.5
Siemens AG
5
5
15 13
Equipment Diagram
16 14
/M21.4 /M21.4
SECONDARY DEVICE
19 17
/M21.5 /M21.5
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR
20 18
/M18.7 /M18.7
6
6
909611
Customer Dwg. No.
7
7
=HZ01
(3)2-RMPP-6H2-SH017-*
S
+H01
=H01
8
8
FACTORY
AS-BUILT
Z9
Sheet 9+
18 Sh.
F
E
D
C
B
A
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 10
1
1
As Manuf
Revision Modification
Retrofitting
Date
19.01.20
04.10.17
GN
GN
Date
Name Norm
Appr.
Drawn
2
2
GN
HEB
SAG
SWITCH
2-POS. SELECTOR
KRAUS & NAIMER
-S11
+.T
KNS:CH10A722-600FT2+S0V840A/A1D1-FT2-F758
05.03.17
SWITCH
BREAKER CONTROL
KRAUS & NAIMER
-S10
+.T
KNS:CHR10_UA5004-600_EG+S1V840A/B21A2+S1M120/B11A+F_UA5011
LOCAL
REMOTE O
2 1 N
/M2.3 /M2.3
C
2 CB Off 1
3
3
4 3 CMD
/M2.4 /M2.4
Orig./Prep.for/Prep.by
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
KING ABDULAZIZ PROJECT
4 CB On 3
6 5 CMD
/M5.2 /M5.2
6 CB Off 5
/M2.3 /M2.3
8 7 CMD
/M5.2 /M5.2
8 CB On 7
/M2.4 /M2.4
10 9 CMD
4
4
10 NORMAL 9
12 11 POS.
12 NORMAL 11
POS.
Siemens AG
KRAUS & NAIMER (GERMANY)
5
5
Equipment Diagram
SECONDARY DEVICE
2RMLG02
-S31
+.T
7XG2220-2AA00-0AA0
2 1
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR /S6.2 /S6.2
4 3
/S6.3 /S6.3
6
6
6 5
/S6.3 /S6.3
8 7
/S6.4 /S6.4
10 9
909611
12 11
Customer Dwg. No.
14 13
16 15
7
7
18 17
/M4.7 /M4.7
20 19
/M3.5 /M3.5
22 21
/S1.2 /S1.2
24 23
=HZ01
/S1.3 /S1.3
(3)2-RMPP-6H2-SH017-*
26 25
S
/S1.4 /S1.4
28 27
/S1.4 /S1.4
+H01
=H01
8
8
PE
/S1.5
FACTORY
AS-BUILT
Z10
Sheet 10+
18 Sh.
F
E
D
C
B
A
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 11
1
1
As Manuf
Revision Modification
Retrofitting
Date
19.01.20
04.10.17
GN
GN
RELAY, XR152
DC SUPVN
SIEMENS
RELAY, XR152
DC SUPVN
SIEMENS
-27DC2
+.T
-27DC1
+.T
Date
Name Norm
Appr.
Drawn
7PG1741-3DB10-4AA0 7PG1741-3DB10-4AA0
2
2
GN
HEB
SAG
05.03.17
14 13 14 13
/M11.8 /M11.8 /M10.8 /M10.8
PE PE
/M11.8 /M10.8
1 1
/M11.7 /M11.7
2 2
/M21.3 /M21.2
3 3
/M11.7 /M11.7
4 4
/M21.3 /M21.2
5 5
/M1.3 /M1.3
3
3
6 6
/M17.3 /M17.3
Orig./Prep.for/Prep.by
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
7 7
/M1.3 /M1.3
KING ABDULAZIZ PROJECT
8 8
/M17.3 /M17.3
4
4
Siemens AG
5
5
(GERMANY)
Equipment Diagram
SIEMENS-REYROLLE
-74TC1
+.T
7PG1753-1DB10-4BE0
SECONDARY DEVICE
A
22 21
/M3.7 /M3.7
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR
B
6
6
14 13
/M3.7 /M3.7
C
27 28
/M3.8 /M3.8
909611
2 4
-R74.12
-R74.11
-R74.13
/M21.1 /M21.1
Customer Dwg. No.
+.B 2 KΩ
+.B 3,3 KΩ
+.B 3,3 KΩ
1 3
/M11.7 /M11.7
7
7
VCE:410A13213
VCE:410A13288
VCE:410A13288
SIEMENS-REYROLLE (GERMANY)
5 7
/M1.4 /M1.4
=HZ01
6 8
(3)2-RMPP-6H2-SH017-*
/M17.3 /M17.3
S
PE
/M3.8
/M3.7 /M3.7 /M3.8 2 1
+H01
=H01
8
8
FACTORY
AS-BUILT
Z11
Sheet 11+
18 Sh.
F
E
D
C
B
A
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 12
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
13
21
13
21
N
4
2
1
14
22
14
22
I > I > I > I >
(N)
3
Translate file C: C_FB_EN.etr, 04-11-24
/G2.4
/G2.5
/M17.2
/G1.2
/G1.2
SIEMENS/ 5SY4510-7 SIEMENS/ 5SY5206-7
+.B MCB for Heater & Outlet +.B MCB FOR CC & OC
-F151 5ST3010 -F10 5ST3010
B B
Translate file A: A_COC_DE
Translate file D: leer2
Translate file B: leer1
1N
13
21
13
21
4
2
1
14
22
14
22
I > I > I > I >
2N
3
/G2.6
/G2.6
/M17.2
/G1.3
/G1.3
C SIEMENS/ 5SY4503-7 SIEMENS/ 5SY5206-7 C
+.B MCB for Panel Lighting +.B MCB FOR UT & CP
-F152 5ST3010 -F20 5ST3010
library 2: PTD_M2_CoC_E
library 1: PTD60617
13
21
4
2
library 3:
library 4:
14
22
Symbol
Symbol
Symbol
Symbol
D I > I > D
3
/G1.5
/G1.5
SIEMENS/ 5SY5206-7
+.B MCB FOR MD & IL
-F30 5ST3010
CopyRight (C) Siemens AG 2014 All Rights Reserved
13
21
4
2
E E
14
22
I > I >
3
/G1.7
/G1.7
SIEMENS/ 5SY5206-7
+.B MCB FOR BUS COMPT. SF6 LOW PRESSURE
-F40 5ST3010
FACTORY
AS-BUILT
F F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
+H01 Z12
Sheet 12+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 13
*
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
33
14
41
12
3
5
1
11
34
42
(+)2
4
3
I > I > I >
(-)1
5
7
6
8
/S4.2
/S4.2
/S4.3
/M10.7
/M10.5
SIEMENS/ 3RV1611-1DG14
Translate file C: C_FB_EN.etr, 04-11-24
/M2.6
/M2.7
/M2.7
+.B 3-pol, 3A RD-2R-HB 110V DC 0 0 0 0
-F501 MCB FOR MAIN-1 RELAY +.B 110VDC, 2CO
3RV1901-1A -KRC CB ON INTERPOSING RELAY
B B
Translate file A: A_COC_DE
1NO + 1NC
/S4.5
/S4.6
/S4.6
/M3.1
/M3.6
/M3.6
SIEMENS/ 3RV1611-1DG14 RD-2R-HB 110V DC 0 0 0 0
Translate file D: leer2
Translate file B: leer1
+.B 3-pol, 3A +.B 110VDC, 2CO
-F502 SPARE MCB -KRT CB OFF INTERPOSING RELAY
3RV1901-1A
1NO + 1NC
C C
43
23
33
13
A1
A2
14
24
34
44
library 2: PTD_M2_CoC_E
/M9.5
/M7.7
/M11.4
/M16.7
=H02/M3.6
SIEMENS / 3RH2140-1BF40
33
14
41
library 1: PTD60617
12
+.B 3RT2916-1DG00
3
5
1
-KXCB
11
34
42
library 3:
library 4:
I > I > I >
2
6
Symbol
Symbol
Symbol
Symbol
D D
/S5.2
/S5.2
/S5.3
/M10.6
SIEMENS/ 3RV1611-1DG14 /M10.6
+.B 3-pol, 3A
-F601 MCB FOR MAIN-2 RELAY
3RV1901-1A
1NO + 1NC
CopyRight (C) Siemens AG 2014 All Rights Reserved
/S5.5
/S5.6
/S5.6
SIEMENS/ 3RV1611-1DG14
+.B 3-pol, 3A
-F602 SPARE MCB
3RV1901-1A
1NO + 1NC
E E
FACTORY
AS-BUILT
F F
* RETROFITTING OF PP MV SWBD
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
+H01 Z13
Sheet 13+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 14
X1
X1
RESET ORDER
RESET ORDER
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
X2
X5
X2
X5
23
13
/M11.3
/M11.6
SIEMENS/ 3SB3501-6BA20 3SB3501-6BA60
+.T EXTERNAL TRIP +.T SECURED AUX.
14
24
Translate file C: C_FB_EN.etr, 04-11-24
-H01 RED 110V DC -H07 DC VOLTAGE PRESENCE
3SB3400-1L WHITE 110V DC
/M5.3
/M5.3
3SB3901-1CF 3SB3400-1L SIEMENS / 3SB3500-0AA11
B 3SB3901-1QF +.T LOCAL RESET PUSH BUTTON B
Translate file A: A_COC_DE
-S02 3SB3400-0D
Translate file D: leer2
Translate file B: leer1
/M11.3
SIEMENS/ 3SB3501-6BA40
+.T MVCB OPEN POSITION
-H02 GREEN 110V DC
3SB3400-1L
3SB3901-1DF
/M11.4
3SB3501-6BA20
+.T MVCB CLOSED POSITION
-H03 RED 110V DC
3SB3400-1L
C 3SB3901-1CF
C
3SB3501-6BA60 /M11.4
+.T PERMIT TO CLOSE
library 2: PTD_M2_CoC_E
-H04 WHITE 110V DC
3SB3400-1L
library 1: PTD60617
3SB3901-1QF
library 3:
library 4:
/M11.5
3SB3501-6BA30
+.T LOW SF6 PRESSURE ALARM
Symbol
Symbol
Symbol
Symbol
D -H05 YELLOW 110V DC D
3SB3400-1L
3SB3901-1BF
/M5.6
/S3.4
/S3.4
/S3.4
/M5.5
/S3.3
/S3.3
/S3.3
+.B
212
223
225
227
213
123
117
115
113
122
/M11.5
3SB3501-6BA20 -KCT
CopyRight (C) Siemens AG 2014 All Rights Reserved
+.T LOW SF6 PRESSURE FAULT
-H06 RED 110V DC ABB:RXMVB2-RK251204-AP
3SB3400-1L CT SHORTING RELAY
3SB3901-1CF ABB:1MRK000893-C
ABB:5619483-A
ABB:1MRK002136-A
224
/M11.6
3SB3501-6BA20
226
228
214
124
114
211
118
116
121
E +.T VT MEASUREMENT FAULT
E
/M5.6
/S3.4
/S3.4
/S3.3
/S3.4
/S3.3
/S3.3
/M5.5
-H08 RED 110V DC
3SB3400-1L
3SB3901-1CF
BB CT IN SERVICE BB CT SHORTING
FACTORY
AS-BUILT
F F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
+H01 Z14
Sheet 14+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 15
43
53
63
73
83
13
21
31
A1
A2
14
22
32
44
54
64
74
84
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A CB SF6 VERY LOW RELAY (STAGE 2) A
/M5.7
/M11.5
/M17.7
/M3.2
=H02/M1.5
3RH2122-1BF40
+.B 3RT2916-1DG00
-KSF6.2 3RH2911-1FA40
Translate file C: C_FB_EN.etr, 04-11-24
43
53
83
13
21
31
61
71
A1
E1
B B
Translate file A: A_COC_DE
E2
A2
14
22
32
44
54
62
72
84
Translate file D: leer2
Translate file B: leer1
43
13
21
31
A1
/M6.2
/M6.3
/M11.4
/M11.3
/M14.4
/M16.4
/M16.3
3RH1422-1BF40
+.B 3RH1911-1FA22
A2
14
22
32
44
-KLQ0 3RT1916-1DG00
3RT1916-1DG00 CB SF6 LOW RELAY (STAGE-1)
/M5.8
/M11.5
/M1.5
/M17.6
SIEMENS / 3RH2122-1BF40
+.B 3RT2916-1DG00
-KSF6.1
43
53
83
13
21
31
61
71
A1
E1
C C
E2
A2
14
22
32
44
54
62
72
84
/M6.5
/M6.6
/M7.5
/M7.5
/M16.5
/M16.6
=H02/M3.5
=H02/M3.4
3RH1422-1BF40
43
13
21
31
library 2: PTD_M2_CoC_E
A1
+.B 3RH1911-1FA22
-KLQ1E 3RT1916-1DG00
library 1: PTD60617
A2
14
22
32
44
3RT1916-1DG00
EXTERNAL TRIP ORDER
library 3:
library 4:
/M4.2
/M1.5
/M11.3
SIEMENS / 3RH2122-1BF40
+.B 3RT2916-1DG00
-KH01
Symbol
Symbol
Symbol
Symbol
D D
43
53
83
13
21
31
61
71
A1
E1
E2
A2
14
22
32
44
54
62
72
84
CopyRight (C) Siemens AG 2014 All Rights Reserved
/M5.2
/M5.2
/M7.7
/M7.6
/M16.2
/M16.2
=H02/M3.6
=H02/M3.5
3RH1422-1BF40
+.B 3RH1911-1FA22
-KS11 3RT1916-1DG00
3RT1916-1DG00
43
23
33
13
A1
A2
14
24
34
44
E E
/M5.4
/M4.7
/M8.3
SIEMENS / 3RH2140-1BF40
43
23
33
53
83
13
61
71
A1
+.B 3RT2916-1DG00
-KRS
A2
14
24
34
44
54
62
71
84
/M5.4
=H02/M4.2
=H02/M2.6
SIEMENS / 3RH2140-1BF40
+.B 3RT2916-1DG00
-KRS2
/M1.5
/M2.6
/M7.7
/M11.4
/M16.7
=H02/M3.6
SIEMENS / 3RH2140-1BF40
+.B CB PERMIT TO CLOSE FACTORY
-KCBR 3RH2911-1FA22
F 3RT2916-1DG00 AS-BUILT F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
+H01 Z15
Sheet 15+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 16
43
53
83
13
21
31
61
71
A1
E1
E2
A2
14
22
32
44
54
62
72
84
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
/M6.4
/M6.4
/M7.4
/M7.3
/M16.5
/M16.5
=H02/M3.3
=H02/M3.3
3RH1422-1BF40
+.B 3RH1911-1FA22
-KLQ1 3RT1916-1DG00
3RT1916-1DG00
Translate file C: C_FB_EN.etr, 04-11-24
43
53
83
13
21
31
61
71
A1
B B
Translate file A: A_COC_DE
A2
14
22
32
44
54
62
72
84
Translate file D: leer2
Translate file B: leer1
CAPDIS RELAY
/M10.2
/M12.3
/M10.5
/M10.6
SIEMENS / 3RH2122-1BF40
+.N 3RT2916-1DG00
-KVT1 3RH2911-1FA22
43
53
83
13
21
31
61
71
A1
A2
14
22
32
44
54
62
72
84
CAPDIS RELAY
/M10.3
/M10.5
/M10.5
/M10.6
/M10.6
SIEMENS / 3RH2122-1BF40
+.N 3RT2916-1DG00
C -KVT3 3RH2911-1FA22
C
library 2: PTD_M2_CoC_E
library 1: PTD60617
43
43
library 3:
library 4:
33
53
83
13
21
31
13
21
61
71
A1
A1
A2
14
22
32
44
A2
14
22
34
44
54
62
72
84
Symbol
Symbol
Symbol
Symbol
D D
CAPDIS RELAY VT MEASUREMENT FAULT WDG-1
/M10.3
/M10.5
/M10.6
/M10.5
/M8.2
/M11.6
/M17.5
=H02/M3.7
SIEMENS / 3RH2122-1BF40 SIEMENS / 3RH2131-1BF40
+.N 3RT2916-1DG00 +.N 3RT2916-1DG00
-KVT2 -KVT5 3RH2911-1FA22
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
43
33
53
83
13
21
61
71
A1
43
13
21
31
A1
A2
14
22
34
44
54
62
72
84
A2
14
22
32
44
VT MEASUREMENT FAULT WDG-2
/M10.6
/M8.3
/M11.7
/M17.5
=H02/M3.8
SIEMENS / 3RH2131-1BF40
CAPDIS RELAY
+.N 3RT2916-1DG00
/M10.4
/M12.3
SIEMENS / 3RH2122-1BF40
-KVT6 3RH2911-1FA22
+.N 3RT2916-1DG00
-KVT4
FACTORY
F F
AS-BUILT
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
+H01 Z16
Sheet 16+
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
F
E
D
C
B
A
1
*
CopyRight (C) Siemens AG 2014 All Rights Reserved Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
ELCAD-Version 7.7.1 SP2
Symbol library 1: PTD60617 Translate file A: A_COC_DE Last used: 19.01.20
Symbol library 2: PTD_M2_CoC_E Translate file B: leer1 FBSTP2
Symbol library 3: Translate file C: C_FB_EN.etr, 04-11-24
Symbol library 4: Translate file D: leer2 Archive: =H01 / S / Z / 17
1
1
As Manuf
Revision Modification
Retrofitting
Date
19.01.20
04.10.17
-K0A
GN
GN
CB OPEN COMMAND RELAY
CB CLOSE COMMAND RELAY
BB SF6 LOW PRESSURE RELAY
-KBSF6.2 3RH2911-1FA40
-KBSF6.1 3RH2911-1FA40
-K0E 3RH2911-1FA40
+.B 3RT2916-1DG00
3RH2122-1BF40
+.B 3RT2916-1DG00
3RH2122-1BF40
+.B 3RT2916-1DG00
3RH2122-1BF40
+.B 3RT2916-1DG00
SIEMENS / 3RH2122-1BF40
Date
RETROFITTING OF PP MV SWBD
Name Norm
BB SF6 VERY LOW PRESSURE RELAY
Appr.
Drawn
2
2
GN
HEB
SAG
05.03.17
A2 A1 A2 A1 A2 A1 A2 A1
/M13.4 /M13.5 /M2.4 /M2.3
14 13 14 13 14 13 14 13
/M11.6 /M13.2 /M2.6 /M3.1
3
3
Orig./Prep.for/Prep.by
22 21 22 21 22 21 22 21
RIYADH METRO PP6H2
/M1.5
RIYADH, SAUDI ARABIA
KING ABDULAZIZ PROJECT
32 31 32 31 32 31 32 31
*
44 43 44 43 44 43 44 43
/M13.3 /M13.2
54 53 54 53 54 53
/M13.3 /M11.5 /M8.2
4
4
/M17.7 64 63 /M17.6 64 63 =H02/M3.7 64 63
/M3.2 74 73 74 73 74 73
=H02/M1.5 84 83 84 83 84 83
Siemens AG
5
5
Equipment Diagram
SECONDARY DEVICE
PP INCOMING FEEDER CUBICLE
8DA10 33kV GIS SWITCHGEAR
6
6
RELAY
VOLTAGE MONITORING
BENDER: VMD420
-F27.2
+.N
BENDER: VMD420
-F27.1
+.N
RELAY
VOLTAGE MONITORING
BWD:B93010006 BWD:B93010006
VA
VA
L1 L1
909611
/S5.4 /S4.4
VB
VB
L2 L2
Customer Dwg. No.
/S5.4 /S4.4
VC
VC
L3 L3
/S5.5 /S4.5
7
7
N N
/S5.5 /S4.5
K1
K1
A1 A1
11 /M9.7 11 /M9.6
/M21.7 /M21.6
12 12
/M21.7 /M21.6
=HZ01
14 14
110VDC
110VDC
(3)2-RMPP-6H2-SH017-*
/M21.7 A2 /M21.6 A2
Aux. Supply
Aux. Supply
/M9.7 /M9.6
S
K2
K2
21 21
/M10.6 /M10.5
22 22
/M10.6 /M10.5
+H01
=H01
24 PE 24 PE
/M10.6 /M9.6 /M10.5 /M9.5
FACTORY
AS-BUILT
8
8
Z17
Sheet 17+
18 Sh.
F
E
D
C
B
A
1 2 3 4 5 6 7 8
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
FBSTP2
Archive: =H01 / S / Z / 18
TEMP. CONTROLLER
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
2
PANEL LAMP
/G2.6
SGO:02542.3-11
+.B
-E13 LED lamp
/G2.3
/G2.2
+.B
+.B
1
-R02
-B151
Translate file C: C_FB_EN.etr, 04-11-24
8MR2110-3B
HEATER IN MANUAL
8MR2170-1C
HEATER
HEATER IN AUTO
SIEMENS
TEMP. CONTROLLER θ AC/DC 120-240V
30W
PE
B B
2
Translate file A: A_COC_DE
/G2.2
/G2.2
Translate file D: leer2
Translate file B: leer1
2
AUTO
MAN
/G2.2
/G2.3
13
21
14
22
/G2.2
/G2.3
SIEMENS / 3SB3601-2KA11
+.T HEATER SELECTOR SWITCH
-S20
C C
LAMP TEST
NOT USED
library 2: PTD_M2_CoC_E
library 1: PTD60617
23
13
14
24
library 3:
library 4:
/G2.4
/G2.3
+.B +.N
1
/M11.7
SIEMENS / 3SB3500-0AA11 -E12 -R03
GWJ:GW20208
Symbol
Symbol
Symbol
Symbol
D +.T LAMP TEST PUSH BUTTON
D
8MR2110-3B
AC 230V HEATER
-LT 3SB3400-0D AC/DC 120-240V
GWJ:GW26410 30W
PE
PE
N
2
/G2.4
/G2.4
/G2.3
/G2.3
CopyRight (C) Siemens AG 2014 All Rights Reserved
DOOR SWITCH
NOT USED
13
21
E E
14
22
/G2.6
MEYLE / 3AX4206
+.B DOOR SWITCH
-S13
FACTORY
AS-BUILT
F F
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. S =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
SECONDARY DEVICE
+H01 Z18
Sheet 18-
909611 (3)2-RMPP-6H2-SH017-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Equipment Diagram 18 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
FBKLP2-11_I
Archive: =H01 / V / / / 1
111 - C90 OTTA 6-T P/P
1 2 3 2 1
1
3 1) Test socket
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Jumper
5 3) Disconnecting link
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 14
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X1A
+.T -S31 :21 111 /S1.2 +.F -T1L1 :1S1
112 /S1.2
-X1A :135 B 113 /S1.4 +.F -T1L1 :1S2
-X1A :123 A 114 /S1.5 +.F -T1L1 :1S3
+.T -S31 :23 121 /S1.3 +.F -T1L2 :1S1
122 /S1.3
-X1A :114 A 123 /S1.5 +.F -T1L2 :1S2
C -X1A :133 A 124 /S1.5 +.F -T1L2 :1S3
C
+.T -S31 :25 131 /S1.4 +.F -T1L3 :1S1
132 /S1.4
-X1A :124 A 133 /S1.5 +.F -T1L3 :1S2
-X1A :C90 A 134 /S1.6 +.F -T1L3 :1S3
library 2: PTD_M2_CoC_E
+.T -S31 :27 135 /S1.4 -X1A :113 A
-X1A :134 A C90 /S1.6 -XPE :1 B
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X1A
+.B /1
Sheet 1+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Connection table 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 2
FBKLP2-11_I 111 - C90 OTTA 6-T P/P
1 2 3 2 1
1
3 1) Test socket
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Jumper
5 3) Disconnecting link
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 14
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X1B
=H02 +.B -X1B :111 A 111 /S2.2 +.F -T1L1 :2S1
112 /S2.2
-X1B :135 B 113 /S2.4 +.F -T1L1 :2S2
-X1B :123 A 114 /S2.4 +.F -T1L1 :2S3
=H02 +.B -X1B :121 A 121 /S2.3 +.F -T1L2 :2S1
122 /S2.3
-X1B :114 A 123 /S2.5 +.F -T1L2 :2S2
C -X1B :133 A 124 /S2.5 +.F -T1L2 :2S3
C
=H02 +.B -X1B :131 A 131 /S2.3 +.F -T1L3 :2S1
132 /S2.4
-X1B :124 A 133 /S2.5 +.F -T1L3 :2S2
-X1B :C90 A 134 /S2.5 +.F -T1L3 :2S3
library 2: PTD_M2_CoC_E
=H02 +.B -X1B :135 A 135 /S2.4 -X1B :113 A
-X1B :134 A C90 /S2.6 -XPE :2 B
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X1B
+.B /2
Sheet 2+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Connection table 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 3
FBKLP2-11_I 111 - B90 OTTA 6-T P/P
1 2 3 2 1
1
3 1) Test socket
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Jumper
5 3) Disconnecting link
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 12
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X1C
-X1C :121 A 111 /S3.3
-X1CA :6 A 112 /S3.3 +.F -T1L1 :3S2
-X1C :120 A 113 /S3.3
-X1CA :8 A 114 /S3.3 +.F -T1L2 :3S2
-X1C :119 A 115 /S3.4
-X1CA :10 A 116 /S3.4 +.F -T1L3 :3S2
-X1CA :14 A 117 /S3.5 -X1C :118 B
C 118 /S3.5 -X1C :117 B
C
-X1C :115 A 119 /S3.5 +.F -T1L3 :3S1
-X1C :113 A 120 /S3.5 +.F -T1L2 :3S1
-X1C :111 A 121 /S3.5 +.F -T1L1 :3S1
B90 /S3.6 -XPE :5 B
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X1C
+.B /3
Sheet 3+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Connection table 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 4
FBKLP2-11_I 1 -14 OTTA 6-T P/P
1 2 3 2 1
1
3 1) Test socket
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Jumper
5 3) Disconnecting link
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 14
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X1CA
=H06 +.B -X1A :1 A 1 /S3.3 -KCT :214
=H06 +.B -X1A :2 A 2 /S3.4 -KCT :228
=H06 +.B -X1A :3 A 3 /S3.4 -KCT :226
=H06 +.B -X1A :4 A 4 /S3.5 -X1CA :12 A
5 /S3.3
-X1C :112 A 6 /S3.3 -KCT :113
7 /S3.3 -KCT :213
C -X1C :114 A 8 /S3.3 -KCT :115
C
9 /S3.4 -KCT :227
-X1C :116 A 10 /S3.4 -KCT :117
11 /S3.4 -KCT :225
-X1CA :4 B 12 /S3.3 -KCT :114
library 2: PTD_M2_CoC_E
13 /S3.3 -KCT :116
-X1C :117 A 14 /S3.4 -KCT :118
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X1CA
+.B /4
Sheet 4+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Connection table 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 5
FBKLP2-11_I 501-517 USST 6-T
1 2 3 2 1
1 PSBJ-URTK 6 RD - 3026719
2
3 1) Jumper
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Test socket
3) Disconnecting link
5
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 17
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X2A
=H02 +.F -T5L1 :1a 501 /S4.2 -F501 :1
=H02 +.F -T5L1 :1n 502 /S4.2 +.N -F27.1 :N
=H02 +.F -T5L2 :1a 503 /S4.2 -F501 :3
=H02 +.F -T5L2 :1n 504 /S4.3 -X2A :508 B
=H02 +.F -T5L3 :1a 505 /S4.3 -F501 :5
=H02 +.F -T5L3 :1n 506 /S4.3 +.T -S31 :7
507 /S4.3 -XPE :7 B
C 508 /S4.6 -X2A :504 B
C
+.N -F27.1 :L1 509 /S4.4 -F501 :2
+.N -F27.1 :L2 510 /S4.4 -F501 :4
+.N -F27.1 :L3 511 /S4.5 -F501 :6
512 /S4.5 -F502 :2
library 2: PTD_M2_CoC_E
513 /S4.6 -F502 :4
514 /S4.6 -F502 :6
library 1: PTD60617
515 /S4.7
516 /S4.7
517 /S4.8
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X2A
+.B /5
Sheet 5+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 6
FBKLP2-11_I 601-621 USST 6-T
1 2 3 2 1
1 PSBJ-URTK 6 RD - 3026719
2
3 1) Jumper
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Test socket
3) Disconnecting link
5
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 21
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X2B
=H02 +.F -T5L1 :2a 601 /S5.2 -F601 :1
=H02 +.F -T5L1 :2n 602 /S5.2 +.N -F27.2 :N
=H02 +.F -T5L2 :2a 603 /S5.2 -F601 :3
=H02 +.F -T5L2 :2n 604 /S5.3 -X2B :608 B
=H02 +.F -T5L3 :2a 605 /S5.3 -F601 :5
=H02 +.F -T5L3 :2n 606 /S5.3 -X2B :621 B
607 /S5.3 -XPE :8 B
C 608 /S5.6 -X2B :604 B
C
+.N -F27.2 :L1 609 /S5.4 -F601 :2
+.N -F27.2 :L2 610 /S5.4 -F601 :4
+.N -F27.2 :L3 611 /S5.5 -F601 :6
612 /S5.5 -F602 :2
library 2: PTD_M2_CoC_E
613 /S5.6 -F602 :4
614 /S5.6 -F602 :6
library 1: PTD60617
615 /S5.7
616 /S5.7
617 /S5.8
library 3:
library 4:
=H02 +.B -X2B :618 A 618 /S6.6 -F601 :2
=H02 +.B -X2B :619 A 619 /S6.6 -F601 :4
Symbol
Symbol
Symbol
Symbol
D =H02 +.B -X2B :620 A 620 /S6.7 -F601 :6 D
=H02 +.B -X2B :621 A 621 /S6.7 -X2B :606 B
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X2B
+.B /6
Sheet 6+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 7
1 - 90 USST 4
1
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 90
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X5
-X5 :30 B 1 /M4.2 -F20 :1
+.T -F31 :H2 2 /M4.7 -KRS :13
-X5 :41 B 3 /M5.4 +.T -S02 :23
-X5 :43 B 4 /M5.4 -XQ1 :521 A
5 /M5.7 -XQ1 :890 A
6 /M6.2 -XQ0 :101 A
7 /M6.4 -XQ1 :111 A
C 8 /M6.5 -XQ1 :511 A
C
9 /M7.2 -XQ0 :81 A
-KLQ1 :21 10 /M7.2 -XQ0 :83 A
+.T -F86.1 :7 11 /M8.4 -KRS :23
=H02 +.B -X5 :35 A 12 /M8.5
library 2: PTD_M2_CoC_E
=H06 +.B -X6 :24 A 13 /M8.6
14 /M8.6 -X5 :32 B
library 1: PTD60617
15 /M8.8 +.T -F31 :J2
* -XQ0 :23 A 16 /M9.4 +.N -F27.1 :A1
+.N -KVT1 :53 17 /M10.6 -F601 :11
library 3:
library 4:
+.T -27DC1 :13 18 /M10.7 -F501 :11
+.T -S02 :24 19 /M5.3 -KRS2 :A1
Symbol
Symbol
Symbol
Symbol
D +.T -S02 :14 20 /M5.3 -KRS :A1 D
-XQ0 :44 A 21 /M4.3 -KH01 :A2
22 /M4.4 +.T -F86.1 :28
+.T -F86.1 :26 23 /M4.8 -KS11 :E2
+.T -F31 :D1 24 /M6.8 -KLQ1E :A2
+.T -F31 :J1 25 /M9.5 * -KXCB :A2
CopyRight (C) Siemens AG 2014 All Rights Reserved
26 /M9.5 +.N -F27.1 :A2
+.T -27DC1 :14 27 /M10.7 +.N -KVT6 :A2
=EXT +MC -X :XX 28 /M1.5 -X40 :19 A
=EXT +MC -X :XX 29 /M1.5 -X40 :20 A
=EXT +MC -X :XX 30 /M4.2 -X5 :1 A
=EXT +MC -X :XX 31 /M4.2 -KH01 :A1
=EXT +MC -X :XX 32 /M8.6 -X5 :14 B
E =EXT +MC -X :XX 33 /M8.6 -X5 :57 B
E
+.T -F86.1 :25 34 /M4.7 -KRS :14
=EXT +MC -X :XX 35 =H02/M4.4 =H02 +.B -X5 :7 A
=EXT +MC -X :XX 36 =H02/M4.4 =H02 +.B -X5 :27 A
37 /M4.5
38 /M4.5
39 /M4.5
40 /M4.5
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate * RETROFITTING OF PP MV SWBD
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X5
+.B /7
Sheet 7+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 8
1 - 90 USST 4
1
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 90
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X5
=EXT +MC -X :XX 41 /M5.4 -X5 :3 A
=EXT +MC -X :XX 42 /M5.4 -KRS :A1
=EXT +MC -X :XX 43 /M5.4 -X5 :4 A
=EXT +MC -X :XX 44 /M5.4 -KRS2 :A1
+.T -F31 :D6 45 /M7.3 -KLQ1 :22
+.T -F31 :D8 46 /M7.4 -KLQ1 :14
+.T -F31 :D10 47 /M7.5 -KLQ1E :22
C +.T -F31 :D12 48 /M7.5 -KLQ1E :14
C
+.T -F31 :D14 49 /M7.6 -KS11 :22
+.T -F31 :D16 50 /M7.7 -KS11 :14
+.T -F31 :F2 51 /M7.7 * -KXCB :14
+.T -F31 :F4 52 /M8.2 -K0E :54
library 2: PTD_M2_CoC_E
+.T -F31 :F6 53 /M8.2 +.N -KVT5 :14
+.T -F31 :F8 54 /M8.3 -KRS :24
library 1: PTD60617
+.T -F31 :F10 55 /M8.5 =H02 +.B -X5 :36 A
+.T -F31 :F12 56 /M8.6 =H06 +.B -X6 :25 A
+.T -F31 :F14 57 /M8.6 -X5 :33 B
library 3:
library 4:
+.T -F31 :F16 58 /M8.7
+.N -KVT3 :14 59 /M10.5 -F501 :33
Symbol
Symbol
Symbol
Symbol
D +.N -KVT3 :54 60 /M10.6 -F601 :33 D
+.N -KVT5 :A1 61 /M10.5 -F501 :34
+.N -KVT6 :A1 62 /M10.6 -F601 :34
+.N -KVT5 :53 63 =H02/M3.7 -K0E :63
-K0E :53 64 /M8.2 +.N -KVT5 :13
+.N -KVT6 :13 65 /M8.3 -KRS :23
CopyRight (C) Siemens AG 2014 All Rights Reserved
=H02 +.B -X5 :2 A 66 =H02/M2.6 -KRS2 :23
=H02 +.B -X5 :11 A 67 =H02/M2.6 -KRS2 :24
=H02 +.B -X5 :14 A 68 =H02/M3.3 -KLQ1 :62
=H02 +.B -X5 :15 A 69 =H02/M3.3 -KLQ1 :54
=H02 +.B -X5 :16 A 70 =H02/M3.4 -KLQ1E :62
=H02 +.B -X5 :17 A 71 =H02/M3.5 -KLQ1E :54
=H02 +.B -X5 :18 A 72 =H02/M3.5 -KS11 :62
E =H02 +.B -X5 :19 A 73 =H02/M3.6 -KS11 :54
E
=H02 +.B -X5 :20 A 74 =H02/M3.6 * -KXCB :44
=H02 +.B -X5 :21 A 75 =H02/M3.7 -K0E :64
=H02 +.B -X5 :22 A 76 =H02/M3.7 +.N -KVT5 :54
=H02 +.B -X5 :23 A 77 =H02/M4.2 -KRS2 :14
=H02 +.B -X5 :24 A 78 =H02/M4.2 +.T -F86.1 :9
+.N -KVT6 :53 79 =H02/M4.2 -KRS2 :13
=H02 +.B -X5 :4 A 80 =H02/M4.2 +.T -F86.1 :11
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
F PE-PEN-bus C Screwed cable gland Higher level insulation plate * RETROFITTING OF PP MV SWBD F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X5
+.B /8
Sheet 8+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 9
1 - 90 USST 4
1
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 90
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X5
=H02 +.B -X41 :4 A 81 =H02/M1.5 -KSF6.2 :63
=H02 +.B -X41 :12 A 82 =H02/M1.5 -KSF6.2 :64
+.T -S11 :5 83 /M5.2 -KS11 :E1
+.T -S11 :7 84 /M5.2 -KS11 :A1
85 /M9.2
86 /M9.3
87 /M9.3
C 88 /M9.3
C
89 /M9.3
90 /M9.3
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X5
+.B /9
Sheet 9+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 10
1 - 30 USST 4
1
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 30
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X6
+.T -H01 :X1 1 /M11.1 -F30 :1
+.T -H01 :X2 2 /M11.3 -KH01 :21
+.T -H02 :X2 3 /M11.3 -KLQ0 :21
+.T -H03 :X2 4 /M11.4 -KLQ0 :13
+.T -H04 :X2 5 /M11.4 -KCBR :33
+.T -H05 :X2 6 /M11.5 -KSF6.1 :13
+.T -H06 :X2 7 /M11.5 -KSF6.2 :13
C +.T -H08 :X2 8 /M11.6 +.N -KVT5 :33
C
=H06 +.B -X6 :65 A 9 /M11.2 -F30 :3
=H04 +.B -X6 :32 A 10 /M11.2 -KH01 :22
+.N -KVT5 :34 11 /M11.6 -KBSF6.2 :14
+.T -74TC1 :1 12 /M11.7 +.N -KVT6 :34
library 2: PTD_M2_CoC_E
=H02 +.B -X5 :41 A 13 /M17.3 +.T -27DC2 :6
=H02 +.B -X5 :55 A 14 /M14.6 * +.T -F31 :H4
library 1: PTD60617
15 /M12.2 -XQ1 :831 A
16 /M12.3 -XQ1 :833 A
17 /M12.4 -XQ0 :92 A
library 3:
library 4:
=H06 +.B -X6 :64 A 18 /M11.2
=H04 +.B -X6 :31 A 19 /M11.2 -KH01 :21
Symbol
Symbol
Symbol
Symbol
D 20 /M12.4 D
=H06 +.B -X5 :21 A 21 /M14.4 -KLQ0 :31
=H06 +.B -X5 :67 A 22 /M14.4 -KLQ0 :32
* =H06 +.B -X5 :88 A 23 /M14.4 +.T -F31 :G18
=H06 +.B -X5 :48 B 24 /M14.5 +.T -F31 :G16
=H02 +.B -X5 :29 A 25 =H02/M5.4 +.T -F31 :G3
CopyRight (C) Siemens AG 2014 All Rights Reserved
=H02 +.B -X5 :30 A 26 =H02/M5.4 +.T -F31 :G4
27 /M14.6
28 /M14.6
29 /M14.7
30 /M14.8
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate RETROFITTING OF PP MV SWBD
F * F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X6
+.B /10
Sheet 10+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 11
1 - 64 USST 4-MT
1 2 3 2 1
1
3 1) Jumper
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Test socket
3) Disconnecting link
5
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 64
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X7
=EXT +MC -X :XX 1 /M16.2 -KS11 :31
=EXT +MC -X :XX 2 /M16.2 -KS11 :32
=EXT +MC -X :XX 3 /M16.2 -KS11 :43
=EXT +MC -X :XX 4 /M16.2 -KS11 :44
=EXT +MC -X :XX 5 /M16.3 -KLQ0 :61
=EXT +MC -X :XX 6 /M16.3 -KLQ0 :62
=EXT +MC -X :XX 7 /M16.4 -KLQ0 :43
C =EXT +MC -X :XX 8 /M16.4 -KLQ0 :44
C
=EXT +MC -X :XX 9 /M16.4 -KLQ1E :31
=EXT +MC -X :XX 10 /M16.5 -KLQ1 :32
=EXT +MC -X :XX 11 /M16.5 -KLQ1 :43
=EXT +MC -X :XX 12 /M16.5 -KLQ1 :44
library 2: PTD_M2_CoC_E
=EXT +MC -X :XX 13 /M16.6 -KLQ1E :43
=EXT +MC -X :XX 14 /M16.6 -KLQ1E :44
library 1: PTD60617
=EXT +MC -X :XX 15 /M16.7 -KCBR :43
=EXT +MC -X :XX 16 /M16.7 * -KXCB :34
=EXT +MC -X :XX 17 /M17.1 -F151 :13
library 3:
library 4:
=EXT +MC -X :XX 18 /M17.2 -F152 :14
=EXT +MC -X :XX 19 /M17.2 +.T -74TC1 :8
Symbol
Symbol
Symbol
Symbol
D =EXT +MC -X :XX 20 /M17.4 =H02 +.B -X5 :42 A D
=EXT +MC -X :XX 21 /M17.4 +.N -KVT5 :43
=EXT +MC -X :XX 22 /M17.5 +.N -KVT5 :44
=EXT +MC -X :XX 23 /M17.5 -KSF6.1 :43
=EXT +MC -X :XX 24 /M17.6 -KSF6.1 :44
=EXT +MC -X :XX 25 /M17.6 -KSF6.2 :43
CopyRight (C) Siemens AG 2014 All Rights Reserved
=EXT +MC -X :XX 26 /M17.7 -KSF6.2 :44
=EXT +MC -X :XX 27 /M18.1 +.T -F31 :G2
=EXT +MC -X :XX 28 /M18.2 +.T -F31 :G1
=EXT +MC -X :XX 29 /M18.2 =H02 +.B -X5 :43 A
=EXT +MC -X :XX 30 /M18.3 =H02 +.B -X5 :44 A
=EXT +MC -X :XX 31 /M18.4 +.T -F31 :H6
=EXT +MC -X :XX 32 /M18.4 +.T -F31 :H5
E =EXT +MC -X :XX 33 /M18.5 +.T -F31 :H15
E
=EXT +MC -X :XX 34 /M18.5 +.T -F31 :H14
=EXT +MC -X :XX 35 /M18.5 +.T -F31 :H18
=EXT +MC -X :XX 36 /M18.6 +.T -F31 :H17
=EXT +MC -X :XX 37 /M18.6 +.T -F31 :J12
=EXT +MC -X :XX 38 /M18.6 +.T -F31 :J11
=EXT +MC -X :XX 39 /M19.2 =H02 +.B -X5 :45 A
=EXT +MC -X :XX 40 /M19.2 =H02 +.B -X5 :46 A
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate * RETROFITTING OF PP MV SWBD
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X7
+.B /11
Sheet 11+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 12
1 - 64 USST 4-MT
1 2 3 2 1
1
3 1) Jumper
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4 2) Test socket
3) Disconnecting link
5
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 64
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X7
=EXT +MC -X :XX 41 /M19.2 =H02 +.B -X5 :47 A
=EXT +MC -X :XX 42 /M19.3 =H02 +.B -X5 :48 A
=EXT +MC -X :XX 43 /M19.3 =H02 +.B -X5 :49 A
=EXT +MC -X :XX 44 /M19.3 =H02 +.B -X5 :50 A
=EXT +MC -X :XX 45 /M19.4 =H02 +.B -X5 :51 A
=EXT +MC -X :XX 46 /M19.4 =H02 +.B -X5 :52 A
=EXT +MC -X :XX 47 /M19.5
C =EXT +MC -X :XX 48 /M19.5
C
=EXT +MC -X :XX 49 /M19.5 +.T -F31 :G9
=EXT +MC -X :XX 50 /M19.6 +.T -F31 :G7
=EXT +MC -X :XX 51 /M19.7 =H02 +.B -X5 :53 A
*
=EXT +MC -X :XX 52 /M19.7 =H02 +.B -X5 :54 A
library 2: PTD_M2_CoC_E
=EXT +MC -X :XX 53 /M20.2
=EXT +MC -X :XX 54 * /M20.2
library 1: PTD60617
*
=H02 +.B -X5 :56 A 55 /M14.6 +.T -F31 :H3
=EXT +MC -X :XX 56 /M20.4
* =EXT +MC -X :XX 57 /M20.4
library 3:
library 4:
=H06 +.B -X9 :35 A 58 /M15.7 +.T -F31 :G12
59 /M15.6 +.T -F31 :G10
Symbol
Symbol
Symbol
Symbol
D =H02 +.B -X9 :15 A 60 /M15.7 D
=H02 +.B -X5 :57 A 61 /M14.8 +.T -F31 :G6
=H02 +.B -X5 :58 A 62 /M14.8 +.T -F31 :G5
63 /M20.5
64 /M20.5
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F * RETROFITTING OF PP MV SWBD F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X7
+.B /12
Sheet 12+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 13
1 - 35 USST 4
1
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 35
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X9
1 /M21.1
* 2 /M21.1
=H06 +.B -X5 :27 A 3 /M14.5 +.T -F31 :H4
=H06 +.B -X5 :73 A 4 /M14.6 +.T -F31 :H3
=H06 +.B -X5 :29 A 5 /M14.7 +.T -F31 :G6
=H06 +.B -X5 :75 A 6 /M14.7 +.T -F31 :G5
=H06 +.B -X5 :94 A 7 /M15.5 +.T -F31 :H9
C =H11 +.B -X9 :7 A 8 /M15.5 +.T -F31 :H7
C
9 /M21.3
10 /M21.3
11 /M21.4 +.T -F86.1 :14
12 /M21.4 +.T -F86.1 :16
library 2: PTD_M2_CoC_E
13 /M21.5 +.T -F86.1 :17
14 /M21.5 +.T -F86.1 :19
library 1: PTD60617
15 /M21.6 +.N -F27.1 :11
16 /M21.6 +.N -F27.1 :12
17 /M21.6 +.N -F27.1 :14
library 3:
library 4:
18 /M21.7 +.N -F27.2 :11
19 /M21.7 +.N -F27.2 :12
Symbol
Symbol
Symbol
Symbol
D 20 /M21.7 +.N -F27.2 :14 D
21 /M21.1 +.T -74TC1 :4
22 /M21.1 +.T -74TC1 :2
23 /M21.2 +.T -27DC1 :4
24 /M21.2 +.T -27DC1 :2
25 /M21.3 +.T -27DC2 :4
CopyRight (C) Siemens AG 2014 All Rights Reserved
26 /M21.3 +.T -27DC2 :2
27 /M21.4
28 /M21.5
29 /M21.5
30 /M21.5
31 /M21.6
32 /M21.6
E 33 /M21.7
E
34 /M21.7
35 /M21.7
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F * RETROFITTING OF PP MV SWBD F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X9
+.B /13
Sheet 13+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 14
FBKLP2-11 1 - 40 USST 4
1
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 40
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -X40
1 /M1.2 -F10 :1
* =H06 +.B -X6 :81 A 2 /M1.2 +.T -74TC1 :7
+.T -S11 :4 3 /M2.4 -K0E :13
=H04 +.B -X6 :27 A 4 /M3.3 -KBSF6.2 :73
5 /M3.3 * -KRT :3
=H06 +.B -X6 :22 A 6 /M3.4 +.T -F31 :H12
+.T -F86.1 :10 7 /M3.7 -R74.11 :1
C 8 /M3.8 -R74.13 :1
C
=H02 +.B -X5 :31 A 9 /M1.2 +.T -F31 :G13
=H11 +.B -XQ0 :51 A 10 /M1.1 =H02 +.B -X5 :32 A
=H06 +.B -XQ0 :91 A 11 /M1.2
=H11 +.B -XQ0 :52 A 12 /M1.1
library 2: PTD_M2_CoC_E
=H06 +.B -XQ0 :92 A 13 /M1.2 =H06 +.B -X6 :34 A
=EXT +MC -X :XX 14 /M2.4 +.T -S11 :3
library 1: PTD60617
=EXT +MC -X :XX 15 /M2.4 * -K0A :A1
=EXT +MC -X :XX 16 /M2.4 +.T -S11 :3
=EXT +MC -X :XX 17 /M2.4 -K0E :A1
library 3:
library 4:
=H04 +.B -X6 :25 A 18 /M1.6 * =H06 +.B -X9 :28 A
-X5 :28 B 19 /M1.5 =H06 +.B -X9 :36 A
Symbol
Symbol
Symbol
Symbol
D -X5 :29 B 20 /M1.5 -KSF6.1 :21 D
21 /M3.7 -R74.12 :2
-XQ1 :541 A 22 /M3.2 * -KRT :6
=H04 +.B -X6 :28 A 23 /M3.3 -KBSF6.2 :74
24 /M3.3
=H06 +.B -X6 :23 A 25 /M3.4 +.T -S31 :19
CopyRight (C) Siemens AG 2014 All Rights Reserved
+.T -74TC1 :21 26 /M3.7 -R74.11 :2
+.T -74TC1 :28 27 /M3.8 -R74.13 :2
+.T -74TC1 :13 28 /M3.7 -R74.12 :1
29 /M3.7 -XQ0 :31 A
+.T -74TC1 :14 30 /M3.7 -XQ1 :543 A
31 /M3.5 -XQ0 :22 A
32 /M3.5 -XQ0 :32 A
E 33 /M3.5 -XQ0 :94 A
E
* -XQ0 :18 D 34 /M3.1 -KRT :(-)1
+.T -74TC1 :27 35 /M3.4 -XQ0 :21 A
36 /M2.4 +.T -S10 :8
* =H06 +.B -X6 :82 A 37 /M2.4 -K0E :A1
+.T -74TC1 :22 38 /M3.7 -KRT :6
39 /M3.8
40 /M3.9
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F * RETROFITTING OF PP MV SWBD F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-X40
+.B /14
Sheet 14+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
FBKLP2-13-VBSTB4
Archive: =H01 / V / / / 15
A B C D 100 - 103 VBSTB 4-FS
1
2 1 2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7 1 = Plug-in bridge left
8 2 = Plug-in bridge right
9 FOR DETAILS SEE CIRCUIT DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
No. of Terminals (in total) : 4
Termination A Terminal strip Slot B Termination C Termination D
B Destination Destination Destination Destination B
Translate file A: A_COC_DE
Cable connection to termination Link Term.- Cross-
Translate file D: leer2
no. ref.
Translate file B: leer1
Item designation Item designation Item designation Item designation
A B C D
-XB11
1 2 3 4 5 6 7 8 9 1 2 JUMPER
-KBSF6.2 :44 100 /M13.4 +.F -B11-XB11 :3
-KBSF6.2 :A1 101 /M13.4 +.F -B11-XB11 :2
-KBSF6.1 :A1 102 /M13.5 +.F -B11-XB11 :1
103 /M13.5 +.F -B11-XB11 :0
C C
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XB11
+.B /15
Sheet 15+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Connection table 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 16
1 - 4 USST 4
1
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 4
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -XE13
-E13 :1 1 /G2.6 -S13 :22
-E13 :2 2 /G2.6 -F152 :(N)
3 /G2.7
4 /G2.7
C C
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XE13
+.B /16
Sheet 16+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
FBKLP2-23
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 17
A B C D 1 - 10 VBSTB 4-FS
1 =H01-W01-A51 LIYY 8x0,25 mm²
2 1 2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7 1 = Plug-in bridge left
8 2 = Plug-in bridge right
9 FOR DETAILS SEE CIRCUIT DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
No. of Terminals (in total) : 10
Termination A Terminal strip Slot B Termination C Termination D
B Destination Destination Destination Destination B
Translate file A: A_COC_DE
Cable connection to termination Link Term.- Cross-
Translate file D: leer2
no. ref.
Translate file B: leer1
Item designation Item designation Item designation Item designation
A B C D
-XH1
1 2 3 4 5 6 7 8 9 1 2 JUMPER
BU +.N -F27.2 :A2 1 /M10.2 -XH1-A51 :9 +.N -KVT1 :A2
RD +.N -F27.2 :A1 2 /M10.2 -XH1-A51 :8 -XH1 :5 D
3 /Z6.8 -XH1-A51 :7
WH +.N -KVT1 :A1 4 /M10.3 -XH1-A51 :6
PK -XH1 :8 D 5 /M10.3 -XH1-A51 :5 -XH1 :2 D
BN +.N -KVT2 :A1 6 /M10.3 -XH1-A51 :4
YE +.N -KVT3 :A1 7 /M10.4 -XH1-A51 :3
C GN +.N -F27.1 :21 8 /M10.4 -XH1-A51 :2 -XH1 :5 A
C
GY +.N -KVT4 :A1 9 /M10.4 -XH1-A51 :1
10 /Z6.8 -XH1-A51 :0
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
8 Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XH1
+.B /17
Sheet 17+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 18
A B 1 - 8 UT4-PE
1 1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
6
1 = Plug-in bridge left
7
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 8
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
-XPE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 JUMPER
=H01 +.B -PE 1 /S1.6 -X1A :C90 B
-XSH :PE A 2 /G2.2 -X1B :C90 B
+.N -F27.1 :PE 3 /M9.5 +.T -S31 :PE
+.N -F27.2 :PE 4 /M3.8 +.T -74TC1 :PE
+.T -F86.1 :PE 5 /M4.7 -X1C :B90 B
-E12 :PE 6 /G2.4 +.T -F31 :PE
+.T -27DC1 :PE 7 /M10.8 -X2A :507 B
C +.T -27DC2 :PE 8 /M11.8 -X2B :607 B
C
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XPE
+.B /18
Sheet 18+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
FBKLP2-23
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 19
A B C D 9 - 124 VBSTB 4-FS
1
2 1 2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7 1 = Plug-in bridge left
8 2 = Plug-in bridge right
9 FOR DETAILS SEE CIRCUIT DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
No. of Terminals (in total) : 62
Termination A Terminal strip Slot B Termination C Termination D
B Destination Destination Destination Destination B
Translate file A: A_COC_DE
Cable connection to termination Link Term.- Cross-
Translate file D: leer2
no. ref.
Translate file B: leer1
Item designation Item designation Item designation Item designation
A B C D
-XQ0
1 2 3 4 5 6 7 8 9 1 2 JUMPER
+.T -S20 :22 9 /G2.3 +.L -Q0-X08 :1 +.N -XSH1 :1 B -XSH :1 B
-E12 :N 10 /G2.3 +.L -Q0-X08 :0 +.N -XSH1 :2 B -XSH :2 B
-XQ1 :534 A 11 /M12.5 +.L -Q0-X09 :1
-XR1 :16 A 12 /M12.5 +.L -Q0-X09 :0
-XQ1 :542 A 13 /M3.3 +.L -Q0-X10 :3
-XQ0 :20 A 14 /M3.3 +.L -Q0-X10 :2
15 /Z1.4 +.L -Q0-X10 :1
C 16 /Z1.4 +.L -Q0-X10 :0
C
* -KRC :6 17 /M2.7 +.L -Q0-X11 :9
-KRC :(-)1 18 /M2.7 +.L -Q0-X11 :8 -X40 :34 A
19 /Z1.2 +.L -Q0-X11 :7
-XQ0 :14 A 20 /M3.4 +.L -Q0-X11 :6
library 2: PTD_M2_CoC_E
-X40 :35 B 21 /M3.4 +.L -Q0-X11 :5
-X40 :31 B 22 /M3.4 +.L -Q0-X11 :4
library 1: PTD60617
* -X5 :16 A 23 /M9.4 +.L -Q0-X11 :3
-XQ0 :41 A 24 /M9.4 +.L -Q0-X11 :2
25 /Z1.5 +.L -Q0-X11 :1
library 3:
library 4:
26 /Z1.5 +.L -Q0-X11 :0
-F30 :1 27 /G1.5 +.L -Q0-X12 :9
Symbol
Symbol
Symbol
Symbol
D -F30 :3 28 /G1.5 +.L -Q0-X12 :8 D
29 /Z1.5 +.L -Q0-X12 :7
30 /Z1.5 +.L -Q0-X12 :6
-X40 :29 B 31 /M3.5 +.L -Q0-X12 :5
-X40 :32 B 32 /M3.5 +.L -Q0-X12 :4
-XQ1 :552 A 33 /Z1.3 +.L -Q0-X12 :3
CopyRight (C) Siemens AG 2014 All Rights Reserved
=H02 +.B -X41 :6 B 34 /Z1.3 +.L -Q0-X12 :2
* -XQ0 :24 A 41 /M9.5 +.L -Q0-X12 :1
-KXCB :A1 42 /M9.5 +.L -Q0-X12 :0
-KH01 :A1 43 /M4.3 +.L -Q0-X13 :9
-X5 :21 A 44 /M4.3 +.L -Q0-X13 :8
-XQ0 :72 A 45 /Z1.3 +.L -Q0-X13 :7
46 /M4.4 +.L -Q0-X13 :6
E =H11 +.B -X40 :10 A 51 /M15.2 +.L -Q0-X13 :5 -XQ1 :161 D
E
=H11 +.B -X40 :12 A 52 /M15.2 +.L -Q0-X13 :4 -XQ1 :162 D
54 /M15.3 +.L -Q0-X13 :3
=H06 +.B -X40 :10 A 61 /M14.2 +.L -Q0-X13 :2 -XQ1 :151 D
=H06 +.B -X40 :12 A 62 /M14.2 +.L -Q0-X13 :1 -XQ1 :152 D
64 /M14.2 +.L -Q0-X13 :0
=H02 +.B -X41 :15 A 71 /Z1.7 +.L -Q0-X14 :9
-XQ0 :45 A 72 /Z1.7 +.L -Q0-X14 :8
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate RETROFITTING OF PP MV SWBD
F * F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XQ0
+.B /19
Sheet 19+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
FBKLP2-23
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 20
A B C D 9 - 124 VBSTB 4-FS
1
2 1 2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7 1 = Plug-in bridge left
8 2 = Plug-in bridge right
9 FOR DETAILS SEE CIRCUIT DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
No. of Terminals (in total) : 62
Termination A Terminal strip Slot B Termination C Termination D
B Destination Destination Destination Destination B
Translate file A: A_COC_DE
Cable connection to termination Link Term.- Cross-
Translate file D: leer2
no. ref.
Translate file B: leer1
Item designation Item designation Item designation Item designation
A B C D
-XQ0
1 2 3 4 5 6 7 8 9 1 2 JUMPER
-XQ1 :554 A 73 /Z1.7 +.L -Q0-X14 :7
74 /Z1.7 +.L -Q0-X14 :6
-X5 :9 B 81 /M7.2 +.L -Q0-X14 :5
+.T -F31 :D2 82 /M7.2 +.L -Q0-X14 :4
-X5 :10 B 83 /M7.2 +.L -Q0-X14 :3
+.T -F31 :D4 84 /M7.2 +.L -Q0-X14 :2
-XR1 :16 C 91 /M12.4 +.L -Q0-X14 :1
C -X6 :17 B 92 /M12.4 +.L -Q0-X14 :0
C
-XQ1 :544 A 93 /M3.5 +.L -Q0-X15 :9
-X40 :33 B 94 /M3.5 +.L -Q0-X15 :8
-X5 :6 B 101 /M6.2 +.L -Q0-X15 :7
-KLQ0 :E1 102 /M6.2 +.L -Q0-X15 :6
library 2: PTD_M2_CoC_E
103 /M6.3 +.L -Q0-X15 :5
-KLQ0 :A1 104 /M6.3 +.L -Q0-X15 :4
library 1: PTD60617
=H02 +.B -X5 :3 A 111 /Z1.8 +.L -Q0-X15 :3 -XQ0 :113 C
=H02 +.B -X5 :12 A 112 /Z1.8 +.L -Q0-X15 :2
-KLQ1 :61 113 /Z1.8 +.L -Q0-X15 :1 -XQ0 :111 C
library 3:
library 4:
=H02 +.B -X5 :13 A 114 /Z1.8 +.L -Q0-X15 :0
121 /Z1.8 +.L -Q0-X16 :1
Symbol
Symbol
Symbol
Symbol
D 122 /Z1.8 +.L -Q0-X16 :0 D
123 /Z1.8 +.L -Q0-X17 :1
124 /Z1.8 +.L -Q0-X17 :0
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XQ0
+.B /20
Sheet 20+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
FBKLP2-23
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 21
A B C D 111 - 893 VBSTB 4-FS
1
2 1 2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7 1 = Plug-in bridge left
8 2 = Plug-in bridge right
9 FOR DETAILS SEE CIRCUIT DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
No. of Terminals (in total) : 64
Termination A Terminal strip Slot B Termination C Termination D
B Destination Destination Destination Destination B
Translate file A: A_COC_DE
Cable connection to termination Link Term.- Cross-
Translate file D: leer2
no. ref.
Translate file B: leer1
Item designation Item designation Item designation Item designation
A B C D
-XQ1
1 2 3 4 5 6 7 8 9 1 2 JUMPER
-X5 :7 B 111 /M6.4 +.D -Q1-X11 :9
-KLQ1 :E1 112 /M6.4 +.D -Q1-X11 :8
-KLQ1 :A1 114 /M6.4 +.D -Q1-X11 :7
121 /Z2.3 +.D -Q1-X11 :6
122 /Z2.3 +.D -Q1-X11 :5
124 /Z2.3 +.D -Q1-X11 :4
-XR1 :18 C 131 /M12.6 +.D -Q1-X11 :3
C -XR1 :19 C 132 /M12.6 +.D -Q1-X11 :2
C
=H04 +.B -X6 :26 A 133 /M1.4 +.D -Q1-X11 :1
=H06 +.B -X6 :35 A 134 /M1.4 +.D -Q1-X11 :0
=H06 +.B -X5 :4 A 141 /M14.3 +.D -Q1-X12 :3
=H06 +.B -X5 :51 A 142 /M14.3 +.D -Q1-X12 :2
library 2: PTD_M2_CoC_E
143 /Z2.3 +.D -Q1-X12 :1
144 /Z2.4 +.D -Q1-X12 :0
library 1: PTD60617
151 /M14.2 +.D -Q1-X13 :3 -XQ0 :61 D
152 /M14.2 +.D -Q1-X13 :2 -XQ0 :62 D
153 /Z2.4 +.D -Q1-X13 :1
library 3:
library 4:
154 /Z2.4 +.D -Q1-X13 :0
161 /M15.4 +.D -Q1-X14 :3 -XQ0 :51 D
Symbol
Symbol
Symbol
Symbol
D 162 /M15.4 +.D -Q1-X14 :2 -XQ0 :52 D D
163 /Z2.4 +.D -Q1-X14 :1
164 /Z2.4 +.D -Q1-X14 :0
171 /Z2.5 +.D -Q1-X15 :3
172 /Z2.5 +.D -Q1-X15 :2
173 /Z2.5 +.D -Q1-X15 :1
CopyRight (C) Siemens AG 2014 All Rights Reserved
174 /Z2.5 +.D -Q1-X15 :0
-X5 :8 B 511 /M6.5 +.D -Q1-X51 :9
-KLQ1E :E1 512 /M6.5 +.D -Q1-X51 :8
-KLQ1E :A1 514 /M6.6 +.D -Q1-X51 :7
-X5 :4 B 521 /M5.5 +.D -Q1-X51 :6
-KCT :122 522 /M5.5 +.D -Q1-X51 :5
-KCT :212 524 /M5.6 +.D -Q1-X51 :4
E 531 /Z3.4 +.D -Q1-X51 :3
E
532 /Z3.4 +.D -Q1-X51 :2
-XR1 :13 A 533 /M12.5 +.D -Q1-X51 :1
-XQ0 :11 A 534 /M12.5 +.D -Q1-X51 :0
-X40 :22 A 541 /M3.2 +.D -Q1-X52 :3
-XQ0 :13 A 542 /M3.2 +.D -Q1-X52 :2
-X40 :30 B 543 /M3.7 +.D -Q1-X52 :1
-XQ0 :93 A 544 /M3.7 +.D -Q1-X52 :0
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XQ1
+.B /21
Sheet 21+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
FBKLP2-23
Last used: 19.01.20
ELCAD-Version 7.7.1 SP2
Archive: =H01 / V / / / 22
A B C D 111 - 893 VBSTB 4-FS
1
2 1 2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7 1 = Plug-in bridge left
8 2 = Plug-in bridge right
9 FOR DETAILS SEE CIRCUIT DIAGRAM
Translate file C: C_FB_EN.etr, 04-11-24
No. of Terminals (in total) : 64
Termination A Terminal strip Slot B Termination C Termination D
B Destination Destination Destination Destination B
Translate file A: A_COC_DE
Cable connection to termination Link Term.- Cross-
Translate file D: leer2
no. ref.
Translate file B: leer1
Item designation Item designation Item designation Item designation
A B C D
-XQ1
1 2 3 4 5 6 7 8 9 1 2 JUMPER
=H02 +.B -X41 :13 A 551 /Z3.5 +.D -Q1-X53 :3
-XQ0 :33 A 552 /Z3.5 +.D -Q1-X53 :2
=H02 +.B -X41 :16 A 553 /Z3.6 +.D -Q1-X53 :1
-XQ0 :73 A 554 /Z3.6 +.D -Q1-X53 :0
561 /Z3.6 +.D -Q1-X54 :3
562 /Z3.6 +.D -Q1-X54 :2
563 /Z3.6 +.D -Q1-X54 :1
C 564 /Z3.6 +.D -Q1-X54 :0
C
571 /Z3.6 +.D -Q1-X55 :3
572 /Z3.6 +.D -Q1-X55 :2
573 /Z3.7 +.D -Q1-X55 :1
574 /Z3.7 +.D -Q1-X55 :0
library 2: PTD_M2_CoC_E
815 /Z2.6 +.D -Q1-X82 :3
816 /Z2.6 +.D -Q1-X82 :2
library 1: PTD60617
817 /Z2.7 +.D -Q1-X82 :1
818 /Z2.7 +.D -Q1-X82 :0
-XV :1 B 830 /M12.2 +.D -Q1-X84 :1
library 3:
library 4:
-X6 :15 B 831 /M12.2 +.D -Q1-X84 :0
+.N -KVT4 :14 832 /M12.3 +.D -Q1-X85 :1
Symbol
Symbol
Symbol
Symbol
D -X6 :16 B 833 /M12.3 +.D -Q1-X85 :0 D
-X5 :5 B 890 /M5.7 +.D -B0-X88 :3
-KSF6.2 :A1 891 /M5.7 +.D -B0-X88 :2
-KSF6.1 :A1 892 /M5.7 +.D -B0-X88 :1
893 /M5.8 +.D -B0-X88 :0
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XQ1
+.B /22
Sheet 22+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
FBKLP2-13
Archive: =H01 / V / / / 23
A B C D 1 - 24 UPCV3K
1
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
8 Cable connection to termination
9 FOR DETAILS SEE CIRCUIT DIAGRAM
A B C D
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 24
11
Termination A Terminal strip Termination B Termination C Termination D
12
B Destination Destination Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
no. ref.
Translate file B: leer1
14 Item designation Item designation Item designation Item designation
1 2 3 4 5 6 7 8 9 10 11 12 13 14 -XR1
1 =H00/G1.3 -F10 :2 =H02 +.B -XR1 :1 B
2 =H00/G1.3 -F10 :4 =H02 +.B -XR1 :2 B
3 =H00/G1.3 -F30 :2 =H02 +.B -XR1 :3 B
4 =H00/G1.3 -F30 :4 =H02 +.B -XR1 :4 B
5 =H00/G1.3 =H02 +.B -XR1 :5 B
6 =H00/G1.3 =H02 +.B -XR1 :6 B
7 =H00/G1.3 -KBSF6.1 :13 =H02 +.B -XR1 :7 B
C 8 =H00/G1.3 -KBSF6.1 :43 =H02 +.B -XR1 :8 B
C
9 =H00/G1.3 -KBSF6.2 :43 =H02 +.B -XR1 :9 B
10 =H00/G1.3 -KBSF6.2 :53 =H02 +.B -XR1 :10 B
-F151 :1 11 =H00/G1.3 =H02 +.B -XR1 :11 B
-F151 :N 12 =H00/G1.3 =H02 +.B -XR1 :12 B
library 2: PTD_M2_CoC_E
-XQ1 :533 A 13 =H00/G4.3 +.N -KVT1 :13 =H02 +.B -XR1 :13 B
14 =H00/G4.2 =H02 +.B -XR1 :14 B
library 1: PTD60617
15 =H00/G4.2 -XV :1 A =H02 +.B -XR1 :15 B
-XQ0 :12 A 16 =H00/G4.2 -XQ0 :91 A =H02 +.B -XR1 :16 B
-XR1 :18 A 17 =H00/G4.2 =H02 +.B -XR1 :17 B
library 3:
library 4:
-XR1 :17 A 18 =H00/G4.2 -XQ1 :131 A
19 =H00/G4.2 -XQ1 :132 A =H02 +.B -XR1 :19 B
Symbol
Symbol
Symbol
Symbol
D 20 =H00/G4.2 D
21 =H00/G7.3
22 =H00/G7.3
23 =H00/G7.3
24 =H00/G7.3
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XR1
+.B /23
Sheet 23+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 24
1 - PE USST 4
1
1 =H01-W1 SIHSI-Cu 3x0,5mm2
2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 6
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -XSH
BK -R02 :1 1 /G2.2 -XQ0 :9 D
BK -R02 :2 2 /G2.2 -XQ0 :10 D
+.T -S20 :13 3 /G2.2 -B151 :L
+.T -S20 :21 4 /G2.3 -B151 :2
-F151 :2 5 /G2.3
GNYE -XPE :2 A PE /G2.2 -R02 :PE
C C
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
3 Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XSH
+.B /24
Sheet 24+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 25
A B 1 - 2 UT 2,5-MTD-DIO/L-R
1 1
2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7 1) Diode
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 2
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -XV
-XR1 :15 C 1 /M12.2 -XQ1 :830 A
2 /M12.3
C C
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
Used cores total D Plug housing Test socket
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.B-XV
+.B /25
Sheet 25+
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Terminal Terminal block type Wire type
Last used: 19.01.20 Cable designation Type, no.of cores, cross sec. Destination, equipment code Level A B
ELCAD-Version 7.7.1 SP2
FBKLP2-11
Archive: =H01 / V / / / 26
1 - PE USST 4
1
1 -W1 SIHSI-Cu 3x0,5mm2
2
3
Project: R:/ELCAD7.7.1/PROJECTS/RIYADH METRO_ALSTOM/8DA10/AS MANUF/RETROFITTING PP MV SWG/909611_PP6H2_R1.pro
A A
4
7
1) Bridge insert
8
A
9 Cable connection to termination FOR DETAILS SEE CIRCUIT DIAGRAM
B
Translate file C: C_FB_EN.etr, 04-11-24
10 No. of Terminals (in total) : 3
11
Termination A Terminal strip Termination B
12
B Destination Destination B
Translate file A: A_COC_DE
13 Link Term.- Cross-
Translate file D: leer2
Translate file B: leer1
14 Item designation no. ref. Item designation
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -XSH1
BK -R03 :1 1 /G2.3 +.B -XQ0 :9 C
BK -R03 :2 2 /G2.3 +.B -XQ0 :10 C
GNYE -R03 :PE PE /G2.3 =H01 +.B -PE
C C
library 2: PTD_M2_CoC_E
library 1: PTD60617
library 3:
library 4:
Symbol
Symbol
Symbol
Symbol
D D
CopyRight (C) Siemens AG 2014 All Rights Reserved
E E
Screen bus A Cable clamp Cover
N-bus B Screen bus Insulation plate FACTORY
PE-PEN-bus C Screwed cable gland Higher level insulation plate
F F
3 Used cores total D Plug housing Test socket AS-BUILT
Continued on sheet E Insulated Disconnector
Date 05.03.17 KING ABDULAZIZ PROJECT 8DA10 33kV GIS SWITCHGEAR Customer Dwg. No. V =H01
=HZ01
1
*
As Manuf
Retrofitting
04.10.17
19.01.20
GN
GN
Drawn
Appr.
GN
HEB
RIYADH METRO PP6H2
RIYADH, SAUDI ARABIA
Siemens AG PP INCOMING FEEDER CUBICLE
=H01+.N-XSH1
+.N /26
Sheet 26-
909611 (3)2-RMPP-6H2-SH018-*
Revision Modification Date Name Norm SAG Orig./Prep.for/Prep.by Terminal strip 26 Sh.
1 2 3 4 5 6 7 8
You might also like
- Woman-Centered Coaching Blueprint - Workshop 3 - HandoutNo ratings yetWoman-Centered Coaching Blueprint - Workshop 3 - Handout14 pages
- Line Differential - Test Report For Alstom Make Micom P546 RelayNo ratings yetLine Differential - Test Report For Alstom Make Micom P546 Relay9 pages
- 33KV, 1250a, 26.3ka (3 Sec) Pix-36 Cico Panel SWBD#20211101 - 100747# - 102943100% (3)33KV, 1250a, 26.3ka (3 Sec) Pix-36 Cico Panel SWBD#20211101 - 100747# - 10294349 pages
- Actis - WA - FY19-20 - 152 - Utility MCC-12 Panel Drawing - R00No ratings yetActis - WA - FY19-20 - 152 - Utility MCC-12 Panel Drawing - R0013 pages
- 01 - SCH Inc Generator Araren - 01 - As ManufNo ratings yet01 - SCH Inc Generator Araren - 01 - As Manuf31 pages
- J3520.05-08 6.3kV SWITCHGEAR PANEL R3 - AB 06.03.20No ratings yetJ3520.05-08 6.3kV SWITCHGEAR PANEL R3 - AB 06.03.2042 pages
- Ga, TDS, Drawing, For 11 KV HT Panel - Ntpc-Ele-Ht-002 - r1No ratings yetGa, TDS, Drawing, For 11 KV HT Panel - Ntpc-Ele-Ht-002 - r1283 pages
- Ky8t - SC51 - CGL-1 Trafo-2 25-31.5 Mva - C - 04.03.2020No ratings yetKy8t - SC51 - CGL-1 Trafo-2 25-31.5 Mva - C - 04.03.202058 pages
- TVC-05 - T - 05695 - 3 - Scheme of Oltc DM Box PDFNo ratings yetTVC-05 - T - 05695 - 3 - Scheme of Oltc DM Box PDF9 pages
- SL. NO Item Description Make QTY IncomerNo ratings yetSL. NO Item Description Make QTY Incomer1 page
- L6-PDS-01-H-5215-S-40216-B - 220kV PRTN SCH DRG D13+R1 Bus Coupler R-SNo ratings yetL6-PDS-01-H-5215-S-40216-B - 220kV PRTN SCH DRG D13+R1 Bus Coupler R-S60 pages
- 33kV TWIN FEEDER 3&4 - REV-A - 03.06.2013No ratings yet33kV TWIN FEEDER 3&4 - REV-A - 03.06.201352 pages
- Janeshwar PCC 3.3 Based, Auto Sync, Auto Load Sharing. (Inb. 08.08.18 11,57)No ratings yetJaneshwar PCC 3.3 Based, Auto Sync, Auto Load Sharing. (Inb. 08.08.18 11,57)28 pages
- As Built Drawings-Admin Service Buliding Ass HT - 1 PDF100% (1)As Built Drawings-Admin Service Buliding Ass HT - 1 PDF76 pages
- GS Control Offer of LT Panel For Lucknow ProjectNo ratings yetGS Control Offer of LT Panel For Lucknow Project5 pages
- A 5 11kV 1.2, 2.4 &3 MVAr Cap SpecInfra 240709No ratings yetA 5 11kV 1.2, 2.4 &3 MVAr Cap SpecInfra 24070957 pages
- 22 KV Breaker Technical Specification For Reference PDFNo ratings yet22 KV Breaker Technical Specification For Reference PDF62 pages
- Ga Drawing With Bom and GTP of Indoor Type DB Panel Electronics LabNo ratings yetGa Drawing With Bom and GTP of Indoor Type DB Panel Electronics Lab1 page
- Crompton Greaves/ Kirloskar Milestone/As Sociated Switcgears Siemens/L& ToreqNo ratings yetCrompton Greaves/ Kirloskar Milestone/As Sociated Switcgears Siemens/L& Toreq2 pages
- Switching Single Line Diagram Appendix E: Project: 8DAB-75986 Archive: H07 / A / / / 1No ratings yetSwitching Single Line Diagram Appendix E: Project: 8DAB-75986 Archive: H07 / A / / / 183 pages
- Siemens AG: Circuit Diagram Energy Management - Medium Voltage & SystemsNo ratings yetSiemens AG: Circuit Diagram Energy Management - Medium Voltage & Systems35 pages
- Single Line Drawing 25MVA Mobile SS ABB TABARJALNo ratings yetSingle Line Drawing 25MVA Mobile SS ABB TABARJAL1 page
- Mathematics 9 - Q3 - Mod11 - Conditions Proving For Triangles Similar - v3100% (2)Mathematics 9 - Q3 - Mod11 - Conditions Proving For Triangles Similar - v328 pages
- UBS Business Plan - Stategic Planning and Financing Basis - Model For Generating A Business Plan - (UBS AG) PDFNo ratings yetUBS Business Plan - Stategic Planning and Financing Basis - Model For Generating A Business Plan - (UBS AG) PDF26 pages
- Existentialist Feminism and Simone de Beauvoir PDFNo ratings yetExistentialist Feminism and Simone de Beauvoir PDF2 pages
- Cable Products Pricelist Cable Products Pricelist: Cable Products Price List Cable Products Price ListNo ratings yetCable Products Pricelist Cable Products Pricelist: Cable Products Price List Cable Products Price List24 pages
- Equipment Design: Mechanical Aspects Week 1 Assignment - 1 SolutionNo ratings yetEquipment Design: Mechanical Aspects Week 1 Assignment - 1 Solution4 pages
- Fast-Play Tabletop Wargame Rules For Combined-Arms Operations, The FutureNo ratings yetFast-Play Tabletop Wargame Rules For Combined-Arms Operations, The Future140 pages
- Advanced Performance Engineer Course - XG09 - 27032024No ratings yetAdvanced Performance Engineer Course - XG09 - 270320243 pages
- C-TAW12-71 Exam Practice Questions and AnswersNo ratings yetC-TAW12-71 Exam Practice Questions and Answers10 pages
- Selling Task % Weight of Task in Sales Process % Advertising Contribution To Task Advertising's Contribution To Sales Estimated Estimated Projected100% (1)Selling Task % Weight of Task in Sales Process % Advertising Contribution To Task Advertising's Contribution To Sales Estimated Estimated Projected2 pages
- Wearable Devices For The Detection of Covid-19No ratings yetWearable Devices For The Detection of Covid-1921 pages
- New Design of Intelligent Load Shedding Algorithm Based On Critical Line Overloads To Reduce Network Cascading Failure RisksNo ratings yetNew Design of Intelligent Load Shedding Algorithm Based On Critical Line Overloads To Reduce Network Cascading Failure Risks15 pages
- Design and Manufacturing of Carbon Fiber Composite Drive Shaft As An Alternative To Conventional Steel Drive ShaftNo ratings yetDesign and Manufacturing of Carbon Fiber Composite Drive Shaft As An Alternative To Conventional Steel Drive Shaft10 pages
- CIE IGNITE Season 01 Ideathon Idea SubmissionsNo ratings yetCIE IGNITE Season 01 Ideathon Idea Submissions255 pages
