#include <SPI.
h>
#include <SdFat.h>
#include <SdFatUtil.h>
#include <Ethernet.h>
#include <LiquidCrystal.h> //Arduino's lcd library
uint8_t bufindex;
const uint8_t maxbyte=255;
uint8_t buf[maxbyte];
uint32_t count=0; //Hit Count, as a long
uint32_t difcount=1; //Differencial Count. Makes lcd screen refresh only when
there is a new hit.
LiquidCrystal lcd(2,3,5,6,7,8); //Initializes the lcd screen, lcd.
byte mac[] = {
0x90,0xA2,0xDA,0x00,0x26,0xEB};
byte ip[] = {
192,168,1,177};
char rootFileName[] = "index.htm";
Server server(8081);
Sd2Card card;
SdVolume volume;
SdFile root;
SdFile file;
#define error(s) error_P(PSTR(s))
void error_P(const char* str) {
lcd.print("SD Error"); //If there is a card error, the lcd displays: SD Error
PgmPrint("error: ");
SerialPrintln_P(str);
if (card.errorCode()) {
PgmPrint("SD error: ");
Serial.print(card.errorCode(), HEX);
Serial.print(',');
Serial.println(card.errorData(), HEX);
}
while(1);
}
void setup() {
Serial.begin(256000);
lcd.begin(16,2); //starts the lcd. This one is 16 characters by 2 lines. Ajust
accordingly.
PgmPrint("Free RAM: ");
Serial.println(FreeRam());
pinMode(10, OUTPUT);
digitalWrite(10, HIGH);
if (!card.init(SPI_FULL_SPEED, 4)) error("card.init failed!");
if (!volume.init(&card)) error("vol.init failed!");
PgmPrint("Volume is FAT");
Serial.println(volume.fatType(),DEC);
Serial.println();
if (!root.openRoot(&volume)) error("openRoot failed");
PgmPrintln("Files found in root:");
root.ls(LS_DATE | LS_SIZE);
Serial.println();
PgmPrintln("Files found in all dirs:");
root.ls(LS_R);
Serial.println();
PgmPrintln("Done");
Ethernet.begin(mac, ip);
server.begin();
lcd.setCursor(1,0); //Sets cursor to center text
lcd.print("ServDuino v1.5"); //Displayed only if there is no error. Stays on
screen the entire time.
}
#define BUFSIZ 100
void loop()
{
char clientline[BUFSIZ];
char *filename;
int index = 0;
int image = 0;
Client client = server.available();
if (client) {
boolean current_line_is_blank = true;
index = 0;
while (client.connected()) {
if (client.available()) {
char c = client.read();
if (c != '\n' && c != '\r') {
clientline[index] = c;
index++;
if (index >= BUFSIZ)
index = BUFSIZ -1;
continue;
}
clientline[index] = 0;
filename = 0;
Serial.println(clientline);
if (strstr(clientline, "GET / ") != 0) {
filename = rootFileName;
}
if (strstr(clientline, "GET /") != 0) {
if (!filename) filename = clientline + 5;
(strstr(clientline, " HTTP"))[0] = 0;
Serial.println(filename);
if (! file.open(&root, filename, O_READ)) {
client.println("HTTP/1.1 404 Not Found");
client.println("Content-Type: text/html");
client.println();
client.println("<h2>File Not Found!</h2>");
break;
}
Serial.println("Opened!");
client.println("HTTP/1.1 200 OK");
if (strstr(filename, ".htm") != 0){
client.println("Content-Type: text/html");
count++; //the hit count only increments when an html document loads
}
else if (strstr(filename, ".css") != 0)
client.println("Content-Type: text/css");
else if (strstr(filename, ".png") != 0)
client.println("Content-Type: image/png");
else if (strstr(filename, ".jpg") != 0)
client.println("Content-Type: image/jpeg");
else if (strstr(filename, ".gif") != 0)
client.println("Content-Type: image/gif");
else if (strstr(filename, ".3gp") != 0)
client.println("Content-Type: video/mpeg");
else if (strstr(filename, ".pdf") != 0)
client.println("Content-Type: application/pdf");
else if (strstr(filename, ".js") != 0)
client.println("Content-Type: application/x-javascript");
else if (strstr(filename, ".xml") != 0)
client.println("Content-Type: application/xml");
else
client.println("Content-Type: text");
client.println();
int16_t c;
bufindex=0;
while ((c = file.read()) >= 0) {
buf[bufindex++]=((char)c);
if(bufindex==maxbyte)
{
client.write(buf, maxbyte);
bufindex=0;
}
}
file.close();
if(bufindex>0)
{
client.write(buf, bufindex);
}
bufindex=0;
}
else {
client.println("HTTP/1.1 404 Not Found");
client.println("Content-Type: text/html");
client.println();
client.println("<h2>File Not Found!</h2>");
}
break;
}
}
delay(1);
client.stop();
}
if(count!=difcount) //only runs when count and difcount don't agree
{
difcount=count; //sets difcount to count so function stops running
lcd.setCursor(0,1); //new line
lcd.print("Hits: "); //displays Hits:
lcd.print(count, DEC); //Writes count to screen
}
}
