Scribd
Upload
93 views4 pages

Tutorial 4

This document provides 12 practice problems for determining reactions, shear forces, bending moments, and deflections of beams. The problems involve calculating the value of EIδ under concentrated loads, mid-span deflection given load and geometry parameters, maximum deflection and rotation at the free end of a beam, and drawing shear force and bending moment diagrams for beams with various loading conditions.

Uploaded by

楊子慶
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views4 pages

Tutorial 4

This document provides 12 practice problems for determining reactions, shear forces, bending moments, and deflections of beams. The problems involve calculating the value of EIδ under concentrated loads, mid-span deflection given load and geometry parameters, maximum deflection and rotation at the free end of a beam, and drawing shear force and bending moment diagrams for beams with various loading conditions.

Uploaded by

楊子慶
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CON4331 Tutorial 4

│TUTORIAL 4│

1. Determine the value of EIδ under each concentrated load.

400 N
250 N
2m 2m 1m
A  B 

(Ans. 1133 Nm3, 760 Nm3)

2. Determine the mid-span deflection of the following beam if E = 10 GPa and I = 20 x 106 mm4.

1 kN
1m 0.5 kN/m

A  B 

4m

(Ans. 12.9 mm )

3. Determine the maximum deflection and rotation at the free end of the following beam. Given that
the flexural rigidity (EI) of the beam is equal to 60000 kN-m2.
  10 kN
  7.5 kN/m
 
 
A B  
2m 2m
 
 
(Ans. 6.98 mm, 2.5x10-3 )
 
 
 
 
CON4331 Tutorial 4

 
4. Determine the maximum deflection at the free end of the following beam. Given that the flexural
rigidity (EI) of the beam is equal to 60000 kN-m2.
 
75 kN 80 kN
 
 
 
A B  
2m 1m
 
 
(Ans. 17.43 mm )

Draw the shear force and bending moment diagrams for the following beams.
5.

8 kN/m 

A 
B  C 
3 m  2 m 

6.

40 kN 

12 kN/m 

A  B  C  D 

2 m  2 m  5 m 

 
CON4331 Tutorial 4

7.

500 kNm 
40 kN/m 

A  B  C  D 
6 m  2 m  2 m 

8.

5 kN 

8 kN/m 

A  B  C  D 
0.5m  0.2m 
0.1m 

9.

800 N 
500 N 

200 Nm 

A  B  C  D 
0.5m  0.3m 
0.2m 

10.

1500 N/m 
500 Nm 

A  B  C 
1.2m  0.7m 

 
CON4331 Tutorial 4

11.

30 kN  20 kN 
10 kN/m 

A  B  C D  E 

4 m  4 m  6 m  3 m 

12.

80 kN
200 kNm
30 kN/m 

A  B  C  D  E 

2 m  2 m  4 m  2 m 

You might also like