18.12.2021, 17:48 1.

Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

Section 1: Table Assembly

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 1/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

Parts and Tools Required

The following parts and tools will be used in Section 1

2' x 2' Parts List

QTY Part/Description Packaged In

3 8080 Crossmember Extrusion, 641mm (25-1/4") Linear Extrusion Bundle

1 CRP840-00-650 - PRO Linear Ballscrew Axis, Left Table Axis Left

1 CRP840-00-650 - PRO Linear Ballscrew Axis, Right Table Axis Right

1 CRP910-00-24-FAST: CRP900-00-2424-HW
- (24) 40 Series Anchor Fastener
- (24) M8 x 30mm Socket Head Cap Screw
- (12) M8 Slide-in T-Nut

4 CRP913-00: CRP900-00-2424-HW
- (1) M12 Leveling Foot 50mm (Total QTY: 4)
- (1) M12 BTP Leveling Foot End Plate (Total QTY: 4)
- (2) M8 x 30mm Socket Head Cap Screw (Total QTY: 8)
- (2) M8 Roll In T-Nut (Total QTY: 8)

2' x 3' Parts List

QTY Part/Description Packaged In

4 8080 Crossmember Extrusion, 641mm (25-1/4") Linear Extrusion Bundle

1 CRP840-00-950 - PRO Linear Ballscrew Axis, Left Table Axis Left

1 CRP840-00-950 - PRO Linear Ballscrew Axis, Right Table Axis Right

1 CRP910-00-36-FAST: CRP900-00-2436-HW
- (32) 40 Series Anchor Fastener
- (32) M8 x 30mm Socket Head Cap Screw
- (16) M8 Slide-in T-Nut

4 CRP913-00: CRP900-00-2436-HW
- (1) M12 Leveling Foot 50mm (Total QTY: 4)
- (1) M12 BTP Leveling Foot End Plate (Total QTY: 4)
- (2) M8 x 30mm Socket Head Cap Screw (Total QTY: 8)
- (2) M8 Roll In T-Nut (Total QTY: 8)

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 2/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

3' x 3' Parts List

QTY Part/Description Packaged In

4 8080 Crossmember Extrusion, 961mm (37-7/8") Linear Extrusion Bundle

1 CRP840-00-950 - PRO Linear Ballscrew Axis, Left Table Axis Left

1 CRP840-00-950 - PRO Linear Ballscrew Axis, Right Table Axis Right

1 CRP910-00-36-FAST: CRP900-00-3636-HW
- (32) 40 Series Anchor Fastener
- (32) M8 x 30mm Socket Head Cap Screw
- (16) M8 Slide-in T-Nut

4 CRP913-00: CRP900-00-3636-HW
- (1) M12 Leveling Foot 50mm (Total QTY: 4)
- (1) M12 BTP Leveling Foot End Plate (Total QTY: 4)
- (2) M8 x 30mm Socket Head Cap Screw (Total QTY: 8)
- (2) M8 Roll In T-Nut (Total QTY: 8)

Required Tools:

- 6mm Ball-End Allen Wrench

- Adjustable Wrench

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 3/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1 Table Base Assembly

1.1.1

M 8 x 25mm Socket Head Cap Screw

40 Series Anchor Fastener

8080 Crossmember Extrusion

Insert socket head cap screws into anchor fasteners as indicated.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 4/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1.2

Slide the anchor fasteners and screws into the extrusion counterbores.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 5/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1.3

CRP840-00 Ballscrew Axis, Left

Thread the screws into the left table ballscrew axis as indicated.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 6/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1.4

M 8 Slide In T-Nut

Alternately, you can use the provided slide-in t-nuts to lower the crossmember extrusion.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 7/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1.5

Tighten the indicated fasteners

Assembly Note

Be sure to tighten all four crossmember fasteners.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 8/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1.6

Repeat the previous steps to install the remaining crossmembers.

Machine Configuration Options

2' x 2' machines only require three crossmembers.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 9/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1.7

CRP840-00 Ballscrew Axis, Right

Add anchor fasteners and screws to the other side of the extrusion and attach the right table ballscrew
axis.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 10/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.1.8

Tighten all remaining crossmember anchor screws.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 11/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.2 Leveling Feet Assembly

1.2.1

M 8 Roll-in T-Nut

CRP913-01 Foot Plate

M 8 x 20mm Socket Head Cap Screw

Attach a foot plate to a ballscrew axis as indicated.

Assembly Note

If you assembled the crossmembers in the lowered configuration, locate the block to the side of the crossmember
rather than under it.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 12/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.2.2

Bias the foot plate twoards the crossmember, ensuring it is flush with the bottom of the extrusion.

Tighten the indicated fasteners.

Assembly Note

If your crossmembers are not in the default configuration, do not attempt to bring the foot plate flush with the
extrusion.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 13/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.2.3

7038 M 12 Leveling Foot

M 12 Hex Nut

Install the lock nut onto the leveling foot and thread the leveling foot into the foot plate.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 14/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.2.4

Tighten the lock nut.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 15/16
18.12.2021, 17:48 1. Table Assembly - Benchtop PRO CNC Machine Assembly Instructions

1.2.5

Repeat this process to install the remaining leveling feet at the indicated locations.

https://www.avidcnc.com/support/instructions/benchtop/pro/table/ 16/16