GOW - A318/A319/

JOB CARD PACKAGE TITLE:

A320/A321
Inspections After a Hard Landing or a Hard
Tail Number - MSN -
Overweight Landing for Aircraft with Enhanced
FSN
DMU/FDIMU Load Report 15
ALL

Reference Title DocType

Inspections After a Hard Landing or a Hard
05-51-11-200-004-B Overweight Landing for Aircraft with Enhanced AMM
DMU/FDIMU Load Report 15

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 1

Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

** ON A/C FSN 011-011, 101-137

PRE SB 31-1526 for A/C 101-137
TASK 05-51-11-200-004-B
Inspections After a Hard Landing or a Hard Overweight Landing for Aircraft with
Enhanced DMU/FDIMU Load Report 15
1. Reason for the Job
After a Flight Crew Report (FCR) of a hard landing or a hard overweight
landing, or after the generation of a load report 15 (trigger code 4XXX), you
must:
- Do an analysis of the landing parameters.
- If necessary, do the subsequent steps.
After a FCR of a hard landing or a hard overweight landing, if load report 15 or
the Digital Flight Data Recorder (DFDR)/Quick Access Recorder (QAR) data
tells you that the landing was not hard, no inspection is necessary.
If the landing occurs with one MLG or NLG shock absorber deflated, damage
can occur on the landing gear components or on the adjacent structure. It is
possible that the FCR or load report 15 do not identify the damage. Contact
Airbus for more instructions.

NOTE: An accurate load report <15> is available on:

(a) All aircraft that have an Flight Data Interface and Management
Unit (FDIMU) (FIN10TV) or
(b) Aircraft that have a Data Management Unit (DMU) (FIN 1TV)
with the software (FIN 1TV2) that follows:
- DMU (FIN 1TV) Part Number (P/N) ED45A100 with software
(FIN 1TV2) P/N 360-03587-320
- DMU (FIN 1TV) P/N ED45A300 with software (FIN 1TV2) P/
N 360-03796-015
- DMU (FIN 1TV) P/N ED45A300 with software (FIN 1TV2) P/
N 360-03796-016
- DMU (FIN 1TV) P/N 795040-31-003.
To know the P/Ns of the DMU/FDIMU and related software, you can
refer to the Line Replaceable Unit (LRU) identification page or
Illustrated Parts Catalog (IPC) 31-36-08.

2. Job Set-up Information

A. Fixtures, Tools, Test and Support Equipment

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE QTY DESIGNATION

No specific AR ACCESS PLATFORM 12M (40 FT) -
ADJUSTABLE
No specific AR WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS ZONE DESCRIPTION

312AR, 321AL,
322AL, 322CL,
323AL, 323AR,
325AL, 325AR
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
471AL, 471CL,
482AR, 482CR

** ON A/C FSN 011-011, 101-137

PRE SB 31-1526 for A/C 101-137
C. Referenced Information

REFERENCE DESIGNATION
Ref. Lifting for Aircraft Maintenance Operations
07-11-00-581-001-A
Ref. Lifting of the Aircraft at the Forward Jacking
07-11-00-581-003-A Point, MLG Wheels on the Ground
Ref. Lowering of the Aircraft for Maintenance
07-11-00-586-002-A Operations
Ref. Functional Check of MLG Shock Absorber
12-14-32-614-003-A Charge Pressure
Ref. Check of the NLG Shock Absorber Charge-
12-14-32-614-004-A Pressure

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. De-energize the Aircraft Electrical Circuits
24-41-00-862-002-A Supplied from the External Power
Ref. De-energize the Aircraft Electrical Circuits
24-41-00-862-002- Supplied from the APU
A01
Ref. De-energize the Aircraft Electrical Circuits
24-41-00-862-002- Supplied from the Engine 1(2)
A02
Ref. Inspection/Check of the Cockpit Seats
25-11-00-200-001-A
Ref. Detailed Inspection of Seat Attachments,
25-21-00-210-001-A Seat Structure, Seat Belts, Buckles and
Baggage Bar
Ref. Detailed Inspection of Cabin Attendant Seat
25-22-00-210-001-A Attachments, Seat Structure and Seat Belt
(Including Seat Belt Attachments and
Buckles)
Ref. Visual Check of Cargo Compartment
25-50-00-200-002-A Decompression, Lining, Floor Panels and
Pressure Compensation Valve (as far as
Visible, if ACT(s) or Sliding Carpet System
Installed)
Ref. Operational Test of the Rudder Hydraulic
27-24-00-710-001-A Actuation
Ref. Operational Test of the Elevator and
27-34-00-710-001-A Hydraulic Actuation
Ref. Operational Test of the Trimmable Horizontal
27-44-00-710-002-A Stabilizer Actuator with the Individual
Hydraulic Systems
Ref. Extension of the Flaps on the Ground
27-50-00-866-008-A

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 3 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Extension of the Flaps/Slats on the Ground
27-50-00-866-008-
A01
Ref. Retraction of the Flaps on the Ground
27-50-00-866-009-A
Ref. Retraction of the Flaps/Slats on the Ground
27-50-00-866-009-
A01
Ref. Detailed Visual Inspection of the
27-54-00-200-001-A Transmission Assembly
Ref. Operational Test of the Flap System
27-54-00-710-001-A
Ref. Extension-Retraction of the Spoilers for
27-60-00-866-002-A Maintenance
Ref. Extending the Slats on the Ground
27-80-00-866-004-A
Ref. Retracting the Slats on the Ground
27-80-00-866-005-A
Ref. Access to the Fuel Tanks and the Work Areas
28-10-00-910-002-A
Ref. Pressure Defuel
28-25-00-650-001-A
Ref. Put the Related Hydraulic System in the
29-00-00-864-001-A Depressurized Configuration before
Maintenance Action
Ref. Check of the Load-Report Parameter after
31-37-00-200-001-A Hard/Overweight Landing or Excessive
Turbulence
Ref. Installation of the Safety Devices on the
32-00-00-481-001-A Landing Gears
Ref. Inspection of the MLG after the Aircraft has
32-11-00-200-005-A gone off the Runway

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 4 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Inspection of the MLG Axles after the Aircraft
32-11-00-200-006-A has gone off the Runway
Ref. Inspection of the MLG Side Stay Attachment
32-11-00-220-004-A Lug(s) after the Aircraft has gone off the
Runway
Ref. Removal of the MLG Leg Assembly
32-11-11-000-001-A
Ref. Installation of the MLG Leg Assembly
32-11-11-400-001-A
Ref. Removal of the MLG Shock Absorber
32-11-13-000-001-A
Ref. Installation of the MLG Shock Absorber
32-11-13-400-001-A
Ref. Removal of the MLG Side-Stay Assembly -
32-11-16-000-001-A Pre-EV MLG
Ref. Removal of the MLG Side Stay Assembly -
32-11-16-000-001- Post-EV MLG
A01
Ref. Installation of the MLG Side-Stay Assembly -
32-11-16-400-001-A Pre-EV MLG
Ref. Installation of the MLG Side Stay Assembly -
32-11-16-400-001- Post-EV MLG
A01
Ref. Removal of the MLG Lock Stay
32-11-17-000-001-A
Ref. Installation of the MLG Lock Stay
32-11-17-400-001-A
Ref. Removal of the MLG Lockstay Actuating-
32-11-21-000-001-A Cylinder
Ref. Removal of the MLG Lockstay Actuating-
32-11-21-000-001- Cylinder
A02

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 5 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Installation of the MLG Lockstay Actuating
32-11-21-400-001-A Cylinder
Ref. Installation of the MLG Lockstay Actuating
32-11-21-400-001- Cylinder
A02
Ref. Open the Main Gear Doors for Access
32-12-00-010-001-A
Ref. Close the Main Gear Doors after Access
32-12-00-410-001-A
Ref. Inspection/Check of the Barrel/Drag strut
32-21-00-200-006-A connection
Ref. Removal of the NLG Leg Assembly
32-21-11-000-003-A
Ref. Installation of the NLG Leg Assembly
32-21-11-400-003-A
Ref. Removal of the NLG Shock Absorber Assy
32-21-13-000-001-A
Ref. Removal of the NLG Shock Absorber Assy
32-21-13-000-001- (with nose jacking only)
A01
Ref. Installation of the NLG Shock Absorber Assy
32-21-13-400-001-A
Ref. Installation of the NLG Shock Absorber Assy
32-21-13-400-001- (with nose jacking only)
A01
Ref. Removal of the NLG Drag-Strut Assy
32-21-16-000-002-A
Ref. Removal of the Nose Landing Gear (NLG)
32-21-16-000-002- Drag-Strut Assy (EV NLG)
A02
Ref. Installation of the NLG Drag-Strut Assy
32-21-16-400-002-A

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 6 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Installation of the Nose Landing Gear (NLG)
32-21-16-400-002- Drag-Strut Assy (EV NLG)
A02
Ref. Removal of the NLG Lockstay Assy
32-21-17-000-001-A
Ref. Installation of the NLG Lockstay Assy
32-21-17-400-001-A
Ref. Nose Gear Doors - Ground Doors Opening
32-22-00-010-001-A
Ref. Nose Gear Doors - Ground Doors Closing
32-22-00-410-001-A
Ref. Functional Test of the Normal Extension and
32-31-00-720-002-A Retraction of the Landing Gear
Ref. Removal of the NLG Actuating Cylinder
32-31-22-000-001-A
Ref. Installation of the NLG Actuating Cylinder
32-31-22-400-001-A
Ref. Removal of the MLG Actuating Cylinder
32-31-46-000-001-A
Ref. Installation of the MLG Actuating Cylinder
32-31-46-400-001-A
Ref. Functional Check of Free-Fall Extension
32-33-00-720-001-A
Ref. Inspection/Check of the Wheels and Tires
32-41-00-210-002-A
Ref. Removal of the NLG Wheel
32-41-12-000-001-A
Ref. Removal of the Axle Sleeve
32-41-12-000-002-A
Ref. Installation of the NLG Wheel
32-41-12-400-001-A

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 7 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Installation of the Axle Sleeve
32-41-12-400-002-A
Ref. Operational Check of Manual Mask Release
35-23-00-710-001-A
Ref. Removal of the Dorsal Fin
53-45-11-000-001-A
Ref. Installation of the Dorsal Fin
53-45-11-400-001-A
Ref. Detailed Inspection of Fin to Fuselage,
53-51-00-210-012-A Forward, MID and AFT Attach Fittings,
Outside Fuselage, LH/RH
Ref. General Visual Inspection of Fuselage
53-51-00-210-018-A External Surface and Vertical Stabilizer
Attachment Fitting, underneath Vertical
Stabilizer/Fuselage Fairings
Ref. General Visual Inspection of the Rear
53-51-00-210-020-A Fuselage Internal Structure, between FR70
and FR77
Ref. Removal of the Vertical Stabilizer Fairings
53-55-11-000-001-A
Ref. Installation of the Vertical Stabilizer Fairings
53-55-11-400-001-A
Ref. Removal of the Rudder Fairings
53-55-12-000-001-A
Ref. Installation of the Rudder Fairings
53-55-12-400-001-A
** ON A/C FSN 011-011
Ref. Removal of the Pylon-to-Wing Forward
54-51-17-000-001-A Attach-Fitting at RIB4
Ref. Removal of the Pylon-to-Wing Aft Attach-
54-51-17-000-002-A Fitting at RIB10

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 8 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Removal of the Pylon-to-Wing Forward
54-51-17-000-804-A Attach-Fitting at RIB5
Ref. Removal of the Pylon-to-Wing Aft Attach-
54-51-17-000-805-A Fitting at RIB10
** ON A/C FSN 011-011
Ref. Inspection of the Pylon-to-Wing Forward
54-51-17-200-001-A Attach-Fitting
Ref. Inspection of the Pylon-to-Wing Aft Attach-
54-51-17-200-002-A Fitting
Ref. Inspection of the Shackles at RIB4 and the
54-51-17-200-003-A Spigot
Ref. Inspection of the Shackles at RIB10
54-51-17-200-004-A
Ref. Removal of the Pylon Lateral Access-Doors
54-51-21-000-001-A
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Removal of the Pylon Lateral Access-Doors
54-51-21-000-802-A
** ON A/C FSN 011-011
Ref. Installation of the Pylon Lateral Access-Doors
54-51-21-400-001-A
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Installation of the Pylon Lateral Access-Doors
54-51-21-400-802-A
** ON A/C FSN 011-011

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 9 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Removal of the Pylon-to-Wing Access Panels
54-53-11-000-002-B
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Removal of the Pylon-to-Wing Access Panels
54-53-11-000-804-A and Doors
** ON A/C FSN 011-011
Ref. Installation of the Pylon-to-Wing Access
54-53-11-400-002-B Panels
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Installation of the Pylon-to-Wing Access
54-53-11-400-804-A Panels and Doors
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Detailed Inspection of Horizontal Stabilizer,
55-10-00-210-001-A Internal Structure of Torque Box, Inboard of
Fuselage Fairings
Ref. Detailed Inspection of Horizontal Stabilizer,
55-16-00-200-001-A Rear support fittings, Upper and Lower Attach
Fittings and Surrounding External Structure,
LH/RH
Ref. Detailed Inspection of Vertical Stabilizer,
55-30-00-200-001-A Center Box, Internal Structure as far as
Visible, Front Spar Forward Face and Upper
Closing Rib, Upper Surface
Ref. Detailed Inspection of Rudder Hinge Arm 1,
55-30-00-210-001-A 2, 3, 4 and 5 and Fin Actuator Fittings
(Actuator 1, 2 and 3)
Ref. Detailed Inspection of Rudder Hinge Arm 6
55-30-00-210-002-A and 7

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 10 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Removal of the Vertical Stabilizer Leading-
55-32-11-000-001-A Edge
Ref. Installation of the Vertical Stabilizer Leading-
55-32-11-400-001-A Edge
Ref. Opening/Removal of the Trailing Edge
55-33-13-010-002-A Access-Panels of the Vertical Stabilizer
Ref. Closing/Installation of the Trailing Edge
55-33-13-410-002-A Access-Panels of the Vertical Stabilizer
Ref. Detailed Inspection of Vertical Stabilizer,
55-36-00-210-001-A Attach Fittings, Including Load Introduction
Area at Skin Panels
Ref. Detailed Inspection of Rudder Attach Fitting
55-40-00-210-004-A 1, 2, 3, 4 and 5 and Rudder Actuator Attach
Fittings (Actuator 1, 2 and 3)
Ref. Detailed Inspection of Rudder Attach Fitting 6
55-40-00-210-005-A and 7
** ON A/C FSN 011-011
Ref. Removal of the Power Plant
71-00-00-000-042-A
Ref. Removal of the Power Plant with the Engine
71-00-00-000-042- Positioner TWW 75E (MIAG)
A01
Ref. Removal of the Power Plant with Jacxson
71-00-00-000-042- Tool
A03
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Removal of the Power Plant (Bootstrap
71-00-51-000-802-A Method)
Ref. Removal of the Power Plant (JacXson
71-00-51-000-802- Method)
A01

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 11 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
** ON A/C FSN 011-011
Ref. Opening of the Fan Cowl Doors
71-13-00-010-040-B
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Opening of the Fan Cowl Doors
71-13-00-010-802-A
** ON A/C FSN 011-011
Ref. Closing of the Fan Cowl Doors
71-13-00-410-040-B
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Closing of the Fan Cowl Doors
71-13-00-410-802-A
** ON A/C FSN 011-011
Ref. Detailed Inspection of the Forward Engine
71-21-11-210-040-B Mount
Ref. Detailed Inspection of Aft Engine Mount
71-22-11-210-042-B Installation
Ref. Inspection/Check After the Engine has
72-00-00-200-008-A Exceeded the Operational Limits
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Inspection of the Engine after Exposure to
72-00-00-200-812-A Excessive Turbulence, High Aircraft Lateral
Loads or Heavy or Overweight Landings
** ON A/C FSN 011-011
Ref. Operational Test of the Thrust Reverser
78-31-00-710-042-A System

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 12 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Operational Test of Thrust Reverser with
78-31-00-710-805-A MCDU
Ref. Thrust Reverser Cycling Test (Engine
78-31-00-710-805- Running)
A01
Ref. Manual Extension of the Thrust-Reverser
78-32-00-860-802-A Translating Sleeves
Ref. Manual Retraction of the Thrust-Reverser
78-32-00-860-803-A Translating Sleeves
** ON A/C FSN 011-011
Ref. Manual Deployment of the Blocker Door
78-32-41-860-001-A
Ref. Manual Stowing of the Blocker Door
78-32-41-860-002-A
Ref. Opening of the Thrust Reverser Doors
78-36-00-010-040-B
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Opening of the Thrust Reverser Cowl-Doors
78-36-00-010-802-A
** ON A/C FSN 011-011
Ref. Closing of the Thrust Reverser Doors
78-36-00-410-040-B
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Closing of the Thrust Reverser Cowl-Doors
78-36-00-410-802-A

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 13 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137
Ref. 31-37-51-00 AIDS - STRUCTURE REPORTS -
DESCRIPTION AND OPERATION
Ref. Fig. Flow Chart for the Aircraft with Enhanced DMU/FDIMU
Ref. Fig. Hard landing or a Hard Overweight landing Category for
Aircraft with Enhanced DMU/FDIMU
Ref. Fig. Nose Landing-Gear Leg
Ref. Fig. Nose Landing Gear
Ref. Fig. Main Landing-Gear Leg
Ref. Fig. Illustration of the Main Landing Gear
** ON A/C FSN 011-011
Ref. Fig. Fan Cowl Doors: Hinge and Latch Fittings
Ref. Fig. Thrust Reverser: Hinge Fittings
Ref. Fig. Thrust Reverser: Latch Fittings
Ref. Fig. Exhaust Nozzle: Engine Interface
Ref. Fig. Inlet Cowl: Engine Interface and Rear Bulkhead
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Fig. Inspection of the Nacelle
Ref. Fig. Inspection of the V-blade
** ON A/C FSN 011-011
Ref. Fig. Primary Structure
Ref. Fig. Pylon-to-Engine Attach Fittings and Engine Mounts
Ref. Fig. Pylon-to-Wing Attach Fittings
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 14 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

REFERENCE DESIGNATION
Ref. Fig. Primary Structure
Ref. Fig. Engine-to-Pylon Attach Fittings
Ref. Fig. Pylon-to-Wing Attach Fittings
** ON A/C FSN 011-011
Ref. Fig. MLG Forward Lug Area
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137
Ref. Fig. Lower Part of the Center Fuselage
Ref. Fig. Center Section
Ref. Fig. Component Location in the Belly Fairing Structure
Ref. Fig. Main Structure of the Cone/Rear Fuselage
Ref. Fig. Inspection Areas of the Vertical Tail Plane (VTP) after a Drift
Landing
Ref. Fig. Rudder and Actuator Attach-Fittings

3. Job Set-up

SUBTASK 05-51-11-210-090-A
A. Inspection Requirements for a Hard Landing or a Hard Overweight
Landing
(1) Definitions
There are different categories of hard landings or hard
overweight landings:

(a) Hard landing

A hard landing is a landing with an aircraft weight that
is equal to or less than the Maximum Landing Weight
(MLW) and:
- A normal acceleration (VRTA) that is equal to or
more than 2.6 g and less than 2.86 g at the
aircraft Center of Gravity (CG).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 15 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

(b) Severe hard landing

A severe hard landing is a landing with an aircraft
weight that is equal to or less than the MLW and:
- A normal acceleration (VRTA) that is equal to or
more than 2.86 g at the aircraft CG.

(c) Hard overweight landing

A hard overweight landing is a landing with an aircraft
weight that is more than the MLW and:
- A normal acceleration (VRTA) that is equal to or
more than 1.7 g and less than 2.6 g at the
aircraft CG.

(d) Severe hard-overweight landing

A severe hard-overweight landing is a landing with an
aircraft weight that is more than the MLW and:
- A normal acceleration (VRTA) that is equal to or
more than 2.6 g at the aircraft CG.

(e) High pitch-rate de-rotation-landing

A high pitch-rate de-rotation-landing is a landing during
which the de-rotation is too fast.
You must not use load report 15 to confirm a high
pitch-rate de-rotation. You must send the data of the
event to Airbus.

(2) Confirmation of a hard landing or a hard overweight landing

(a) It is the responsibility of the flight crew to make a report

if they think that there was a hard landing or a hard
overweight landing.

(b) After a crew report of a hard landing or a hard

overweight landing or after the generation of load report
15 (trigger code 4XXX):
- You must confirm the effect parameters to know
the category of the landing.
** ON A/C FSN 011-011, 101-137

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 16 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Ref. Fig. Flow Chart for the Aircraft with Enhanced

DMU/FDIMU
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137

1 To know the effect parameters, refer to:

- The DMU load report <15> Ref. AMM
TASK 31-37-00-200-001 or
- The QAR data read-out (if available) or
- The DFDR read-out.
If the load report <15> is available, get the
values:

Line Value for

CE GW
S3 and T3 VRTA

NOTE: For more information about how to

read the load report <15> Ref. AMM
D/O 31-37-51-00.

NOTE: T3 is only available if there was a

bounce landing.
For more information about how to
read the load report <15> Ref. AMM
D/O 31-37-51-00.

Read the report <15> values to get the impact

parameters:
- Aircraft weight in kg = Gross Weight
(GW) x 10 or
- Aircraft weight in lbs = GW x 100
- VRTA (normal acceleration) in g =
VRTA / 100.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 17 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Example: If the load report <15> displays:

- GW = 6321 if the aircraft weight is in
kg, the aircraft weight is 63210 kg or
- GW = 1393 if the aircraft weight is in
lbs, the aircraft weight is 139300 lbs.
- VRTA: 0291, the normal acceleration is
2.91 g.

(c) Find the category of the landing with the flow charts.
** ON A/C FSN 011-011, 101-137
Ref. Fig. Flow Chart for the Aircraft with Enhanced
DMU/FDIMU
Ref. Fig. Hard landing or a Hard Overweight landing
Category for Aircraft with Enhanced DMU/FDIMU
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137

1 If the category of the landing is a hard landing

or a hard overweight landing:
- You must do the inspections for that
category.

2 If the category of the landing is a severe hard

landing or a severe hard-overweight landing,
you must:

a Do the inspections for each category.

b Send the raw data from the DFDR or

from the QAR to Airbus.

c Send the data about the event and

inspection results to Airbus.

d Contact Airbus for technical

instructions.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 18 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

e Obey the Airbus instructions before the

next flight.

3 If you cannot confirm the impact parameter

values with the DMU/FDIMU or the QAR or the
DFDR:

a You must do the inspection after a

severe hard landing or a severe hard-
overweight landing:
- If you do not find damage
during this inspection, the
temporary return-to-service of
the aircraft is possible. Confirm
the category of the hard
landing in the next 200 Flight
Cycles (FC)/30 days maximum.

b In the shortest possible period, and in

less than 200 FC/30 days, confirm the
impact parameters from the DMU/
FDIMU or the QAR or the DFDR. This
is to find the category of the hard
landing:
- If the landing is a hard landing
or a hard overweight landing:
No more inspections are necessary.
- If the landing is a severe hard
landing or a severe hard-
overweight landing:
Send the raw data from the DFDR or
from the QAR to Airbus.
Send the data about the event and
inspection results to Airbus.
Contact Airbus for technical
instructions.
Obey the Airbus instructions before the
next flight.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 19 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

(3) Inspection preparation

(a) We recommend that you get information from the flight

crew about the landing conditions, for example:
- A touchdown straight, drifting, wing low, tail or
nose heavy
- A touchdown on the main gears or on the main
and nose gears or a high pitch-rate de-rotation
on the nose gear

NOTE: Three touchdown configurations are

possible:
- A hard touchdown on the main gears
only
- A touchdown on the nose gear only
or a high pitch-rate de-rotation
- A touchdown on the nose and main
gears.
- The weight of the aircraft
- The quantity of fuel in each tank
- The instrument indications
- Other information, for example noise that can
be related to a structural failure.

(b) After a hard touchdown on the main gears only, the

inspection of the nose gear area is not necessary.

(c) After a touchdown on the nose gear only or a high

pitch-rate de-rotation:
- Only the inspection of the nose gear and the
NLG section of the fuselage area is necessary.
- Send the raw data from the DFDR or from the
QAR to Airbus.
- Send the data about the event and the
inspection results to Airbus.
- Contact Airbus for technical instructions.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 20 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

- Obey the Airbus instructions before the next

flight.

(d) After a touchdown on the nose and main gears:

- The full inspection is necessary.
- Send the raw data from the DFDR or from the
QAR to Airbus.
- Send the data about the event and the
inspection results to Airbus.
- Contact Airbus for technical instructions.
- Obey the Airbus instructions before the next
flight.

(e) After a drift landing:

- Refer to the touchdown configuration and obey
the applicable requirements given in
paragraphs 3.A.(3)(a) and (b) or (c) or (d).
- Do the special access procedure for the
inspection after a drift landing.
- Do the special inspections of the rear fuselage
and the vertical tail plane after a drift landing.

NOTE: The last inspection paragraph gives the

necessary inspections after a drift landing.

(f) We recommend that you get the Post Flight Report

(PFR) related to a hard landing or a hard overweight
landing.

(g) You must also do all the additional checks related to the
events given in the FCR or the PFR.

SUBTASK 05-51-11-481-069-A
B. Safety Precautions
(1) Make sure that the safety devices are installed on the landing
gears Ref. AMM TASK 32-00-00-481-001.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 21 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

SUBTASK 05-51-11-866-052-A
C. Extension of the Flight Control Surfaces
(1) Extend the flaps Ref. AMM TASK 27-50-00-866-008.
(2) Extend the slats Ref. AMM TASK 27-80-00-866-004.
(3) Extend the spoilers Ref. AMM TASK 27-60-00-866-002.

SUBTASK 05-51-11-010-052-A
D. Get Access
(1) Open the main gear doors and install the safety devices Ref.
AMM TASK 32-12-00-010-001.
(2) Open the nose gear doors and install the safety devices Ref.
AMM TASK 32-22-00-010-001.

SUBTASK 05-51-11-010-056-A
E. Special Access for the Inspection After a Drift Landing
(1) Put the WARNING NOTICE(S) in position to tell persons not to
operate the flight controls.
(2) Put the ACCESS PLATFORM 12M (40 FT) - ADJUSTABLE in
position at Zone 320.
(3) Open access door 312AR.
(4) Remove vertical stabilizer fairings 323AL and 323AR Ref. AMM
TASK 53-55-11-000-001.
(5) Remove dorsal fin 321AL Ref. AMM TASK 53-45-11-000-001.
(6) Remove rudder fairings 325AL and 325AR Ref. AMM TASK
53-55-12-000-001.
(7) Remove leading-edge access panels 322AL and 322CL of the
vertical stabilizer Ref. AMM TASK 55-32-11-000-001.
(8) Open the trailing-edge access panels of the vertical stabilizer
Ref. AMM TASK 55-33-13-010-002.

SUBTASK 05-51-11-860-053-A
F. Aircraft Maintenance Configuration

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 22 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

(1) Make sure that the electrical circuits are de-energized Ref.
AMM TASK 24-41-00-862-002.
(2) Make sure that the hydraulic systems are depressurized Ref.
AMM TASK 29-00-00-864-001.
(3) Put WARNING NOTICE(S) in the cockpit to tell persons not to
operate the systems.
(4) Put the ACCESS PLATFORM 12M (40 FT) - ADJUSTABLE in
position.

4. Procedure

SUBTASK 05-51-11-210-105-A
A. General Inspection Recommendations

NOTE: All the inspections are visual unless specified differently in

the text. Operators can refer to the Non-destructive Testing
Manual (NTM) and use the non-destructive procedures.
(1) If you find damage during an inspection and if it is necessary to
disconnect or remove components (pipes, ducts, cables,
electrical connectors and mechanic linkages), do a functional
test of the related system after re-assembly.
(2) If it is necessary to open (remove) access panels and doors,
examine them.
Make sure that:
- They are aligned correctly,
- They have no distortion or cracks,
- The paint is not damaged,
- All fasteners and safety devices are in the correct
position.

(3) If there is damage to the aircraft structure, refer to the

Structural Repair Manual (SRM). The SRM has the approved
damage limits and repair procedures.

SUBTASK 05-51-11-210-106-A

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 23 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

B. General Inspection
Do a walk around inspection of the aircraft. Make sure that you cannot
see damage and fluid leaks. Carefully examine the landing gears, the
wheels, the tires and the brake units.

SUBTASK 05-51-11-210-091-A
C. Inspection of the NLG

NOTE: This inspection is applicable if there was a hard landing or a

hard overweight landing on:
- The nose gear only (high pitch-rate de-rotation) or
- The nose and main gears.
The NLG inspection is not necessary after a hard landing or
a hard overweight touchdown on the MLG only.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
NLG
A. Lift the aircraft: X
- On the forward
jacking point only
Ref. AMM TASK
07-11-00-581-003
or
- On the 3 jacking
points
Ref. AMM TASK
07-11-00-581-001
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 24 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. (1) Make sure X
that the shock
absorber extends
fully and
smoothly.
Measure
dimension H:
** ON A/C FSN
011-011,
101-137
Ref. Fig. Nose
Landing-Gear
Leg
** ON A/C FSN
011-011,
101-137
PRE SB
31-1526 for A/C
101-137
- The dimension
must be between
447 mm (17.5984
in.) and 451 mm
(17.7559 in.).
(2) If the shock
absorber does
not extend fully
and smoothly or if
dimension H is
not in the
specified limits:
- Contact Airbus X
for more
instructions
before the next
flight.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 25 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Do a check of the X
pressure in the
shock absorber
Ref. AMM TASK
12-14-32-614-004
.
If you find an
unsatisfactory
condition:
(1) Remove the X
shock absorber
for overhaul
Ref. AMM TASK
32-21-13-000-001
.
D. Do a visual X
inspection of the
wheels for
distortion, cracks
and damaged
paintwork.
If you find
damage:
(1) Remove the X
wheels
Ref. AMM TASK
32-41-12-000-001
.
(2) Remove the X
axle sleeve
Ref. AMM TASK
32-41-12-000-002
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 26 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(3) Do a visual X
inspection of the
axle and sleeve
for damage.
If you find
damage:
(a) Remove the X
NLG leg
assembly for
overhaul
Ref. AMM TASK
32-21-11-000-003
.
E. Examine the NLG X
and all the
components
installed on it for:
- Cracks
- Scores
- Tears
- Rupture
- Leakage
- Damaged
paintwork.
Examine the
attachment
fittings on the
NLG. Examine
the hydraulic lines
and the electrical
harnesses for the
correct condition.
If you find
damage in the
avionics
compartment,
examine:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 27 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) The gear well X
roof, the roof-to-
sidewall joint and
the floor support-
strut attach-
fittings for:
- Distortion
- Pulled or
damaged
fasteners
- Damaged
paintwork.
F. Make sure that X
you can install the
NLG safety lock
easily.
G. Examine the X
shock absorber
sliding-rod (the
part that you can
see) for blue
color, signs of
bronze, chrome
damage or
external oil leaks.
If you find
damage:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 28 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Remove the X
shock absorber
assembly for
overhaul
Ref. AMM TASK
32-21-13-000-001
(refer to the
manufacturer's
instructions for
the overhaul
procedure).
H. Examine the drag X
strut assembly
and its
attachment
fittings for
distortion, cracks
and damaged
paintwork.
If you find
damage:
(1) Remove the X
drag strut
assembly for
overhaul
Ref. AMM TASK
32-21-16-000-002
(refer to the
manufacturer's
instructions for
the overhaul
procedure).
(2) On the X
aircraft, examine
the attachment
fitting for damage.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 29 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(3) Examine the X
drag strut
attachment-lugs
on the NLG leg
and measure the
distance between
them
Ref. AMM TASK
32-21-00-200-006
.
If you find
damage:
(a) Remove the X
NLG leg
assembly
Ref. AMM TASK
32-21-11-000-003
.
J. Examine the X
lockstay
assembly for
distortion, cracks
and damaged
paintwork.
If you find
damage:
(1) Remove the X
lockstay
assembly for
overhaul
Ref. AMM TASK
32-21-17-000-001
(refer to the
manufacturer's
instructions for
the overhaul
procedure).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 30 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(2) On the X
aircraft, examine
the attachment
fittings for
damage.
K. Examine the NLG X
actuating cylinder
and its
attachment
fittings for
distortion, cracks,
pulled or
damaged
fasteners and
damaged
paintwork.
If you find
damage:
(1) Remove the X
actuating cylinder
for strip-down
inspection
Ref. AMM TASK
32-31-22-000-001
(refer to the
manufacturer's
instructions for
the strip-down
inspection).
(2) On the X
aircraft, continue
the inspection of
the attachment
fittings for
damage.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 31 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
L. If you removed
components,
install serviceable
components:
- For the
actuating cylinder
Ref. AMM TASK
32-31-22-400-001
- For the lockstay
assembly
Ref. AMM TASK
32-21-17-400-001
- For the NLG leg
assembly
Ref. AMM TASK
32-21-11-400-003
- For the drag
strut assembly
Ref. AMM TASK
32-21-16-400-002
- For the shock
absorber
assembly
Ref. AMM TASK
32-21-13-400-001
- For the axle
sleeve
Ref. AMM TASK
32-41-12-400-002
- For the wheels
Ref. AMM TASK
32-41-12-400-001
.

SUBTASK 05-51-11-210-103-A
D. Inspection of the NLG Section of the Fuselage
** ON A/C FSN 011-011, 101-137
Ref. Fig. Nose Landing Gear

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 32 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

** ON A/C FSN 011-011, 101-137

PRE SB 31-1526 for A/C 101-137

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Fuselage-
Nose/
landing-gear
section
between FR9
and FR20.
NOTE : This
inspection is
necessary if
you found
damage
during the
phase 1
checks of the
NLG.
A. Nose-gear
upper-strut
attachments
(FR14).
(1) Examine: X
- the area
around the
bearing,
- the
attachment of
the fitting on
FWD frame
and roof of
the nose
wheel well,
- the link
rods.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 33 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Nose-gear X
actuating
cylinder
attachment-
fitting (FR20).
(1) Examine
the
attachment of
the
actuating
cylinder
fitting to the
upper link at
FR19 and
FR20.
C. Nose-gear X
leg
attachments
(FR19).
(1) Examine
the
attachments
at FR19
and FR20
and the
longitudinal
beams.

SUBTASK 05-51-11-210-092-A
E. Inspection of the Main Landing Gears (MLG)

NOTE: This inspection contains two inspection procedures:

- Item 1. Inspection after a hard landing or a hard
overweight landing
- Item 2. Inspection after a severe hard landing or a
severe hard overweight-landing.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 34 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

If you know the category of the landing, go directly to the

necessary inspection.
If you do not know the category, go directly to item 2.
Inspection after a severe hard landing or a severe hard
overweight-landing.
** ON A/C FSN 011-011, 101-137
Ref. Fig. Main Landing-Gear Leg
Ref. Fig. Illustration of the Main Landing Gear
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
MLG after a
hard landing or a
hard overweight
landing
NOTE : You can
do this inspection
with
the aircraft on its
wheels or on
jacks.
A. Do a check of the X
pressure in the
MLG
shock absorber
Ref. AMM TASK
12-14-32-614-003.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 35 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Do a visual X
inspection of the
wheels
for distortion,
cracks, damaged
paintwork and
correct installation.
Examine the side
walls of the tires
for
damage
Ref. AMM TASK
32-41-00-210-002.
If you find damage:
(1) Do the X
inspection of the
axle and
the axle sleeve for
damage and
out-of-roundness
Ref. AMM TASK
32-11-00-200-006.
C. Examine: X
- The MLG and all
the components
installed on it for
cracks, scores,
tears, rupture,
leakage and
damaged
paintwork
(carefully examine
the
dragstay blend and
the forward
pintle-pin area).
- The attachment
fittings of the MLG.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 36 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
D. Examine the X
shock-absorber
sliding rod
(the part that you
can see) for blue
color,
signs of bronze,
chrome damage or
external oil leaks.
If you find damage:
(1) Remove the X
shock absorber for
overhaul:
Ref. AMM TASK
32-11-13-000-001
(refer to the
manufacturer's
instructions for the
overhaul
procedure).
E. Examine the X
sidestay assembly
and its
attachment fittings
for distortion,
cracks, damaged
paintwork and
chrome
plating.
If you find damage:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 37 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Remove the X
sidestay assembly
for
overhaul
Ref. AMM TASK
32-11-16-000-001
(refer to the
manufacturer's
instructions for the
overhaul
procedure).
(2) Do the X
dimensional
inspection of
the sidestay
cardan-pin joint-
lugs
on the MLG leg
Ref. AMM TASK
32-11-00-220-004.
If you find damage:
- Remove the MLG X
Ref. AMM TASK
32-11-11-000-001.
(3) On the aircraft, X
continue the
inspection of the
sidestay
attachment fitting.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 38 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
F. Examine the X
lockstay assembly
and
the lockstay
actuator for
distortion,
cracks, damaged
paintwork and
chrome
plating.
If you find damage:
(1) Remove the X
lockstay assembly
and
the lockstay
actuator for
overhaul
Ref. AMM TASK
32-11-17-000-001
Ref. AMM TASK
32-11-21-000-001
(refer to the
manufacturer's
instructions for the
overhaul
procedure).
(2) On the aircraft, X
continue the
inspection of the
attachment
fittings for damage.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 39 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
G. Examine the MLG X
retraction actuator
and
its attachment
fittings for
distortion,
cracks, damaged
paintwork and
chrome
plating.
If you find damage:
(1) Remove the X
retraction actuator
for
a strip-down
inspection
Ref. AMM TASK
32-31-46-000-001
(refer to the
manufacturer's
instructions for the
strip-down
procedure).
(2) On the aircraft, X
continue the
inspection of the
attachment
fittings for damage.
H. Examine the MLG X
well for distortion,
cracks, pulled or
torn fasteners and
damaged
paintwork.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 40 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
I. Examine the X
electrical conduits,
connections,
connectors and
flexible
conduits for
damage.
J. If you removed
components,
install
serviceable
components:
- For the retraction
actuator
Ref. AMM TASK
32-31-46-400-001
- For the lockstay
actuator
Ref. AMM TASK
32-11-21-400-001
- For the lockstay
assembly
Ref. AMM TASK
32-11-17-400-001
- For the MLG
Ref. AMM TASK
32-11-11-400-001
- For the sidestay
assembly
Ref. AMM TASK
32-11-16-400-001
- For the shock
absorber
Ref. AMM TASK
32-11-13-400-001.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 41 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
2. Inspection of the
MLG after a
severe
hard landing or a
severe hard
overweight-landing
A. Do the inspection X
of the MLG after
a hard landing or a
hard overweight
landing (Ref. item
1.)
B. Lift the aircraft: X
Ref. AMM TASK
07-11-00-581-001
- Make sure that X
the extension of
the
shock absorber is
smooth and full.
Measure
dimension H (Ref.
Fig.
613/TASK
05-51-11-991-023):
It must
be between 483.05
mm (19.018 in.)
and
487.85 mm
(19.207 in.).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 42 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
- Examine the X
sliding rod (the
part
that you can see)
for blue color,
signs of bronze or
chrome damage.
C. Examine the shock X
absorber for
external
leaks.
D. Do a check of the X
pressure in the
MLG
shock absorber
Ref. AMM TASK
12-14-32-614-003.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 43 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
E. Do the inspection X
of the MLG
Ref. AMM TASK
32-11-00-200-005
for:
- Out-of-roundness
of the shock
absorber sliding-
rod
- Distortion of the
lower cardan-pin
joint of the
sidestay (with the
sidestay
disconnected)
- Distortion of the
torque link pin
- Detailed visual
inspection of the
barrel in the
dragstay blend
area
- Detailed visual
inspection of the
forward pintle-pin
area of the barrel.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 44 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
F. Do the functional X
test of the normal
Extension/
Retraction of the
landing
gear:
Ref. AMM TASK
32-31-00-720-002
- With the MLG
door open and the
safety
lock installed,
make sure that the
MLG is correctly
engaged in the
MLG
uplock (MLG in the
center of the
uplock).
G. Do the functional X
test of the free fall
extension of the
landing gear
Ref. AMM TASK
32-33-00-720-001.
H. If you find an X
unsatisfactory
condition(s):

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 45 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Remove the X
MLG, the sidestay,
the
lockstay assembly
and the lockstay
actuator for
overhaul
Ref. AMM TASK
32-11-11-000-001
Ref. AMM TASK
32-11-16-000-001
Ref. AMM TASK
32-11-17-000-001
Ref. AMM TASK
32-11-21-000-001
(refer to the
manufacturer's
instructions for the
overhaul
procedure).
(2) On the aircraft, X
examine the
attachment fittings
and bearings of
the sidestay for
distortion,
cracks and
damaged
paintwork.
(3) On the aircraft, X
examine the
attachment fittings
of the MLG for
distortion, cracks
and damaged
paintwork.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 46 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(4) Examine the X
MLG actuating
cylinder
and its attachment
fitting for
distortion, cracks
and damaged
paintwork.
If you find damage:
- Remove the X
actuating cylinder
for a strip-down
inspection
Ref. AMM TASK
32-31-46-000-001
(refer to the
manufacturer's
instructions for the
strip-down
inspection
procedure).
- On the aircraft, X
continue the
inspection of the
attachment
fitting for damage.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 47 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(5) Examine the X
gear well for
distortion, cracks,
pulled or torn
fasteners and
damaged
paintwork.
(6) If you removed
components,
install
serviceable
components:
- For the actuating
cylinder
Ref. AMM TASK
32-31-46-400-001
- For the lockstay
actuator
Ref. AMM TASK
32-11-21-400-001
- For the lockstay
assembly
Ref. AMM TASK
32-11-17-400-001
- For the sidestay
assembly
Ref. AMM TASK
32-11-16-400-001
- For the MLG
Ref. AMM TASK
32-11-11-400-001.
I. Lower the aircraft X
on its wheels
Ref. AMM TASK
07-11-00-586-002.

** ON A/C FSN 011-011

SUBTASK 05-51-11-210-093-D

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 48 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

F. Inspection of the Nacelles

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 49 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. Examine the X
nacelle external-
surface
cowls (inlet, fan
cowl doors, thrust
reverser, nozzle)
for:
- Failures, cracks,
signs of
buckling and
permanent
deformations
- Unusual steps
and gaps
between
external cowl
interfaces
- Pulled, bent or
loose rivets or
fasteners
- Open or loose
access covers,
latches
or panels.
Examine the
edges of the
interfacing
cowl parts
(leading or trailing
edges,
cowl edges near
the pylon or
latching areas) for
signs of
abutment (paint
cracks,
delamination,
impacts).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 50 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Open the fan X
cowl doors and
examine:
Ref. Fig. Fan
Cowl Doors:
Hinge and Latch
Fittings
- The internal side
of the doors for
cracks
- The locators
- The hinges and
latch fittings for
permanent
deformations.
If you find X
damage,
examine:
- The fittings for
cracks, failures
or damaged
fasteners
- The adjacent
area for
composite
delamination.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 51 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Open the thrust X
reverser and
examine:
Ref. Fig. Thrust
Reverser: Hinge
Fittings
Ref. Fig. Thrust
Reverser: Latch
Fittings
The forward
interface with the
engine V-Groove
and J-ring for:
- Bearing, cracks
or failures
- The hinge and
latch fittings for
permanent
deformations
- The C-duct
skins that you can
see, for any
damages or
cracks.
If you find X
damage,
examine:
- The hinges and
adjacent areas for
cracks or failures
- The latch fittings
for cracks,
failure or
damaged
fasteners.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 52 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
D Do a manual X
deployment of the
thrust
reverser system
Ref. AMM TASK
78-32-41-860-001
.
Examine the
pivoting doors,
pivoting
door hinges,
actuator, lock,
kicker
plate and seals.
You can then
manually stow the
thrust reverser
Ref. AMM TASK
78-32-41-860-002
.
If you find X
resistance or
unusual
noises during the
manual
deployment of
the thrust
reverser, then
stop and
replace the
damaged
hardware.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 53 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
E If you find X
damage on the
above parts,
examine:
- The engine and
exhaust nozzle
interface for
damaged
fasteners
Ref. Fig. Exhaust
Nozzle: Engine
Interface
- The Common
Nozzle Assembly
(CNA) and
thrust reverser
interface for
bearing, cracks or
failures
- The inlet-cowl
rear bulkhead
and
engine interface.
Ref. Fig. Inlet
Cowl: Engine
Interface and
Rear Bulkhead

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 54 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
F Do an operational X
test of the thrust
reverser system.
Make sure that
the
thrust reversers
can move fully
and
freely Ref. AMM
TASK
78-31-00-710-042
.

SUBTASK 05-51-11-210-094-D
G. Inspection of the Pylons
Ref. Fig. Primary Structure
Ref. Fig. Pylon-to-Engine Attach Fittings and Engine Mounts
Ref. Fig. Pylon-to-Wing Attach Fittings

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
Pylons

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 55 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. Externally X
examine the
pylon secondary
structure and the
pylon primary
structure (lateral
panels).
Make sure that:
- There is/are no
buckling,
shearing,
distortion or
cracks
- The paint is in
the correct
condition
- There are no
pulled or missing
fasteners/rivets.
If you find
damage:
(a) On the X
secondary
structure, remove
the access panels
and doors from
the
damaged area to
see the internal
damage.
(b) On the X
primary structure,
remove
the access doors
Ref. AMM TASK
54-51-21-000-001
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 56 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(c) Internally X
examine the
pylon
secondary
structure and the
pylon
primary structure
(all the items that
you can see) for
distortion,
buckling,
cracks, defective
attachment,
missing
fasteners or other
damage.
This includes:
- The lower and
upper spars
- The ribs
- The lateral
panels
- The fire
protection system
(specially
the attachments
of the fire
extinguishing
bottles)
- The electrical
cables
- Failure on pipes
and ducts
- Leaks in the
drain pipes
- The hydraulic
and fuel pipes

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 57 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
- The bleed-air
system
components.
If you find
damage:
- Contact Airbus. X
(d) Install the X
access doors on
the
primary structure
Ref. AMM TASK
54-51-21-400-001
.
(e) Install the X
access panels
and doors
on the secondary
structure.
B. Open the fan and X
thrust-reverser
cowl
doors
Ref. AMM TASK
71-13-00-010-040
and
Ref. AMM TASK
78-36-00-010-040
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 58 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Externally X
examine the
lower spar,
the pylon lower
area (all the items
that you can see)
and the cantilever
structure, the fan
cowl fittings and
the thrust
reverser fittings.
Make sure that:
- There is/are no
buckling,
shearing,
distortion or
cracks
- The paint is in
the correct
condition
- There are no
pulled or missing
fasteners/rivets.
If you find
damage:
(a) On the X
secondary
structure, remove
the access panels
and doors from
the
damaged area to
see the internal
damage.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 59 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(b) On the X
primary structure,
remove
the access doors
Ref. AMM TASK
54-51-21-000-001
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 60 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(c) Internally X
examine the
pylon
secondary
structure and the
pylon
primary structure
(all the items that
you can see) for
distortion,
buckling,
cracks, defective
attachment,
missing
fasteners or other
damage.
This includes:
- The lower and
upper spars
- The ribs
- The lateral
panels
- The fire
protection system
(specially
the attachments
of the fire
extinguishing
bottles)
- The electrical
cables
- Failure on pipes
and ducts
- Leaks in the
drain pipes
- The hydraulic
and fuel pipes

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 61 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
- The bleed-air
system
components.
If you find
damage:
- Contact Airbus. X
(d) Install the X
access doors on
the
primary structure
Ref. AMM TASK
54-51-21-400-001
.
(e) Install the X
access panels
and doors
on the secondary
structure.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 62 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Remove the X
center fillets from
the
pylon-to-wing
junction Ref.
AMM TASK
54-53-11-000-002
.
NOTE: This is
only applicable
for the
left and right side
panels between
RIB4
and RIB5 and at
RIB10. This is to
make
sure that you can
see the pylon-to-
wing
attach fittings and
the spigot ball
joint.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 63 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Do a detailed X
visual inspection
of:
- The pylon-to-
wing forward
attach-fittings at
RIB4
- The pylon-to-
wing aft attach-
fitting
at RIB10
- The spigot ball
joint between
RIB4
and RIB5.
Make sure that
there are no signs
of
distortion,
buckling, cracks
or other
damage.
If you find
damage:
(a) Remove the X
pylon-to-wing
attach
fittings
Ref. AMM TASK
54-51-17-000-001
and
Ref. AMM TASK
54-51-17-000-002
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 64 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(b) Do a detailed X
visual inspection
of:
- The pylon-to-
wing forward
attach-fittings at
RIB4 Ref. AMM
TASK
54-51-17-200-001
- The shackles at
RIB4 and the
spigot
attach fitting Ref.
AMM TASK
54-51-17-200-003
- The shackles at
RIB10 Ref. AMM
TASK
54-51-17-200-004
- The pylon-to-
wing aft attach-
fitting
at RIB10 Ref.
AMM TASK
54-51-17-200-002
.
(c) Contact X
Airbus.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 65 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
D. Do a visual X
inspection of the
engine
mounts (all the
items that you
can
see) for cracks or
distortion
Ref. AMM TASK
71-21-11-210-040
and
Ref. AMM TASK
71-22-11-210-042
.
This includes the
inspection of:
- The pylon-to-
engine forward
attach-fitting in
the forward area
of RIB1
- The pylon-to-
engine aft
attach-fitting at
the bottom of
RIB3.
If you find
damage:
(a) Remove the X
engine Ref. AMM
TASK
71-00-00-000-042
.
(b) Contact X
Airbus.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 66 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
E. (1) Install the X
center fillets on
the
pylon-to-wing
junction Ref.
AMM TASK
54-53-11-400-002
.
(2) Close the fan X
and thrust-
reverser
cowl doors Ref.
AMM TASK
71-13-00-410-040
Ref. AMM TASK
78-36-00-410-040
.

SUBTASK 05-51-11-210-095-D
H. Inspection of the Engine
(1) Do the inspections after a hard or hard overweight landing Ref.
AMM TASK 72-00-00-200-008.

SUBTASK 05-51-11-210-096-A
J. Inspection of the Wing

NOTE: This inspection contains two inspection procedures:

- Item 1. Inspection after a hard landing or a hard
overweight landing
- Item 2. Inspection after a severe hard landing or a
severe hard overweight landing.
If you know the category of the landing, go directly to the
necessary inspection.
If you do not know the category, go directly to item 2.
Inspection after a severe hard landing or a severe hard
overweight-landing.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 67 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
wing after a
hard landing or a
hard overweight
landing
A. Examine the wing X
top skin from RIB
1
to RIB 10 and
from RIB 18 to
RIB 20,
the shroud panel
and its
attachment.
Make sure that:
- There is no
distortion
- There are no
cracks
- The paint and
the sealant are
not
damaged
- The fasteners
are in the correct
condition.
Carefully examine
the fasteners at
the rear spar
between RIB 3
and
RIB 6 and the
gear rib.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 68 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Do an inspection X
of the wing
bottom
skin. Carefully
examine the
areas
adjacent to:
- The flap beams
- The engine
pylon
- The MLG
attachments
- The shroud-box
outboard seal and
the seal support.
Make sure that:
- There is no
distortion
- There are no
cracks
- There are no
fluid leaks
- The paint and
the sealant are
not
damaged
- The fasteners
are in the correct
condition.
Carefully examine
the fasteners at
the rear spar
between RIB 3
and
RIB 6 and the
gear rib.
If there are signs
of damage on the

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 69 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
wing top or
bottom skins.
(1) Defuel the X
wing
Ref. AMM TASK
28-25-00-650-001
.
(2) Get access to X
the area adjacent
to
the damage
Ref. AMM TASK
28-10-00-910-002
.
(3) Do an internal X
inspection of:
- The applicable
ribs, the front
and rear spars,
the top and
bottom skins, the
stringers,
the riblets, the
brackets and
the plates.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 70 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Do a detailed X
visual inspection
of the
MLG support rib
5.
Ref. Fig. MLG
Forward Lug Area
Examine the lugs
for:
- Cracks
- Damaged paint
- Damaged
sealant
- Bush migration.
Examine the
upper flange,
spar flange
and lower flange
for:
- Damaged
fasteners
- Damaged paint
- Damaged
sealant.
Examine the
stiffener for signs
of
damage and
distortion.
2. Inspection of the
wing after a
a severe hard
landing or a
severe
hard overweight-
landing

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 71 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. Do the inspection X
of the wing after a
hard landing or a
hard overweight
landing (Ref. item
1).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 72 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Do an inspection X
of the front and
rear
spars.
Examine:
- The front spar at
the forward pylon
attachment-area
- The rear-spar
aft face between
RIBS
6 and 9 and the
area between
RIBS 7
and 8 and the aft
pylon attachment-
fitting
- The inner rear
spar at the MLG
attachment
fittings
- The shroud box.
Make sure that:
- There are no
cracks
- There is no
damage
- The paint and
the sealant are
not
damaged
- There are no
fluid leaks
- The fasteners
and safety
devices are
in the correct
condition.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 73 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
If there are signs
of damage on the
front and rear
spars:
(1) Defuel the X
wing
Ref. AMM TASK
28-25-00-650-001
.
(2) Get access to X
the wing area
adjacent to the
damage
Ref. AMM TASK
28-10-00-910-002
.
(3) Do an internal X
inspection of all
the ribs, riblets,
stringers,
brackets and
plates.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 74 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(4) Do an X
inspection of all
the pipes,
hoses, electrical
looms and
raceways.
Make sure that:
- There are no
cracks
- There is no
damage
- The paint and
the sealant are
not damaged
- The fasteners
are in the correct
condition.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 75 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
If there are X
indications of
damage on
the rear spar:
(1) Do an
inspection of
these items:
- The top
diagonal stiffener
- The MLG
attachment
- The top edge
beam
- The MLG pintle
fitting
- The MLG
actuator fitting
- The sidestay
attachment fitting
- The MLG
support rib
- The riblets,
stringers and
brackets.
Make sure that:
- There are no
cracks
- There is no
damage
- The paint and
the sealant are
not
damaged
- The fasteners
are in the correct
condition.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 76 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Close access to
the wing tanks
Ref. AMM TASK
28-10-00-910-002
.

** ON A/C FSN 101-137

PRE SB 31-1526 for A/C 101-137
SUBTASK 05-51-11-210-093-H
G. Inspection of the Nacelles
** ON A/C FSN 101-137
Ref. Fig. Inspection of the Nacelle
Ref. Fig. Inspection of the V-blade
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
Nacelles after a
Hard
Landing or a Hard
Overweight
Landing

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 77 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. (1) Examine the X
nacelle
external-surface
cowls (inlet, fan
cowl doors, thrust
reverser, nozzle
and centerbody)
for:
- Failures, cracks,
signs of
buckling and
permanent
deformations
- Unusual steps
and gaps
between
the external cowl
interfaces
- Pulled, bent or
loose rivets or
fasteners
- Opened or loose
access covers,
latches or panels.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 78 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(2) Examine the X
inboard top area
of
the nacelle
external surface
below
the outboard end
of slat 1 for
signs of contact
during extension.
This includes
failures, cracks,
signs
of buckling and
permanent
deformations.
If you find
damage:
- Refer to the X
SRM-approved
damage
limits and repair
procedures.
If the damage is
more than the
SRM allowable
damage:
- Contact Airbus X
for more
instructions.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 79 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(3) On the thrust X
reverser
cowl-doors, open
the 4 actuator
access covers
and examine the
actuator fittings.
(4) Examine the X
edges of the
interfacing cowl
parts (leading or
trailing edges,
cowl edges near
the
pylon or latching
areas) for signs of
abutment (paint
cracks,
delamination,
impacts).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 80 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Open the fan X
cowl doors
Ref. AMM TASK
71-13-00-010-802
.
Then examine the
parts that follow
for failures,
cracks, signs of
buckling and
permanent
deformations
and/or pulled,
bent or loose
rivets
pulled, bent or
loose rivets or
fasteners:
- The internal
sides of the doors
- The locators
- The Hold Open
Rod (HOR)
- The hinges and
latch fittings
- The inlet flange
with the engine
case

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 81 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
If you find X
damage:
(a) Examine the
adjacent areas
and
the adjacent
structure of the
damaged
parts for cracks,
failures, damaged
fasteners,
composite
delamination
or damage.
(b) Examine the X
structure adjacent
to
the aft bulkhead
for cracks,
failures
or damaged
fasteners.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 82 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Open the thrust X
reverser cowl-
doors
Ref. AMM TASK
78-36-00-010-802
and examine the
parts that follow
for failures,
cracks,
permanent
deformation or
damaged
fasteners:
- The forward
interface with the
engine (V-groove
and V-blade)
- The hinge and
latch fittings
- The inner fixed-
structure skins
that you can see
- The actuator
fittings and the
forward frame
- The interface
between the
nozzle
and the engine
- The interface
between the
centerbody
and the engine.
If you find
damage:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 83 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(a) Examine the X
adjacent areas
and
adjacent structure
of the damaged
parts for cracks,
failures, damaged
fasteners,
composite
delamination
or damage.
(b) Examine the X
nozzle skins and
centerbody skins
for cracks,
failures
or damaged
fasteners.
D. Do a manual X
deployment of the
thrust-reverser
translating
sleeves
Ref. AMM TASK
78-32-00-860-802
.
(1) If you find
resistance or
unusual noises
during the manual
deployment of the
thrust reverser:
- Stop and X
replace the thrust
reverser.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 84 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(2) If the thrust X
reverser is
correctly
deployed,
examine the
parts that follow
for cracks,
failures, damaged
fasteners,
composite
delamination or
damage:
- The blocker
door
- The blocker
door hinges
- The drag links
- The cascades
- The translating
sleeves.
E. If there is no X
damage, do a
manual
retraction of the
thrust-reverser
translating
sleeves
Ref. AMM TASK
78-32-00-860-803
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 85 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
F. Do an operational X
test of the
thrust reverser
system
Ref. AMM TASK
78-31-00-710-805
.
Make sure that
the thrust
reversers
can move fully
and freely.
G. Close the fan X
cowl doors and
the
thrust-reverser
cowl doors
Ref. AMM TASK
71-13-00-410-802
and
Ref. AMM TASK
78-36-00-410-802
.

SUBTASK 05-51-11-210-094-H
H. Inspection of the Pylons
** ON A/C FSN 101-137
Ref. Fig. Primary Structure
Ref. Fig. Engine-to-Pylon Attach Fittings
Ref. Fig. Pylon-to-Wing Attach Fittings
** ON A/C FSN 101-137
PRE SB 31-1526 for A/C 101-137

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 86 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
Pylons
A. Externally X
examine the
pylon
primary and
secondary
structures
for buckling,
shearing,
distortion,
cracks, damaged
paintwork or
pulled
or missing
fasteners/rivets.
If you find
damage:
(a) On the X
secondary
structure,
remove the
access panels
and doors
of the damaged
area to see the
internal damage.
(b) On the X
primary structure,
remove the
access doors
Ref. AMM TASK
54-51-21-000-802
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 87 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(c) Internally X
examine the
primary
and secondary
structures (all the
items that you
can see) for
distortion,
buckling, cracks,
defective
attachment,
missing
fasteners, leaks
or other damage.
This includes:
- The lower and
upper spars
- The ribs
- The side panels
- The fire
protection system
(specially the
attachments of
the fire
extinguishing
bottles)
- The pipes and
the ducts
- The drain pipes
- The hydraulic
pipes.
(d) On the X
primary structure,
install the access
doors
Ref. AMM TASK
54-51-21-400-802
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 88 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Open the fan X
cowl doors and
the thrust-
reverser cowl
doors
Ref. AMM TASK
71-13-00-010-802
and
Ref. AMM TASK
78-36-00-010-802
.
(1) Externally X
examine the
bottom
area of the
primary structure,
the
forward
secondary
structure (all
the items that you
can see), the fan
cowl fittings and
the thrust
reverser
fittings for:
- Buckling or
- Shearing or
- Distortion or
- Cracks or
- Damaged
paintwork or
- Pulled or
missing
fasteners/rivets.
If you find
damage:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 89 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(a) On the X
secondary
structure,
remove the
access panels
and doors
of the damaged
area to see the
internal damage.
(b) On the X
primary structure,
remove the
access doors
Ref. AMM TASK
54-51-21-000-802
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 90 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(c) Internally X
examine the
primary
and secondary
structures (all the
items that you
can see) for
distortion,
buckling, cracks,
defective
attachment,
missing
fasteners, leaks
or other
damage. This
includes:
- The lower spar
(specially the
splicing area
between RIB2
and RIB3)
and the upper
spar
- The ribs
- The side panels
- The fire
protection system
(specially the
attachments of
the
fire extinguishing
bottles)
- The pipes and
the ducts
- The drain pipes
- The hydraulic
pipes.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 91 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(d) On the X
primary structure,
install the access
doors
Ref. AMM TASK
54-51-21-400-802
.
C. (1) Remove X
access panels
471AL, 471CL,
482AR and
482CR from the
pylon-to-wing
junction
Ref. AMM TASK
54-53-11-000-804
.
(2) Do a detailed X
visual inspection
of:
- The forward
pylon-to-wing
attach-fittings at
RIB5
- The spigot
between RIB5
and RIB6
- The aft pylon-to-
wing
attach-fittings at
RIB10.
Make sure that
there are no signs
of distortion,
buckling, cracks
or other damage.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 92 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
If you find
damage:
(a) Remove the X
pylon-to-wing
attach fittings
Ref. AMM TASK
54-51-17-000-804
and
Ref. AMM TASK
54-51-17-000-805
.
(b) Do a detailed X
visual inspection
of:
- The forward
attach fittings at
RIB5
- The spigot
between RIB5
and RIB6
- The aft attach
fittings at RIB10.
(c) Contact X
Airbus.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 93 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
D. (1) Do a visual ** ON
inspection of the A/C
forward and rear FSN
engine mounts. 101-137
Make sure that
PRE
there are no signs
of distortion, SB
buckling, cracks 31-1526
or for A/C
other damage. 101-137
** ON A/C FSN X
101-137
Ref. Fig. Engine-
to-Pylon Attach
Fittings
If you find
damage:
(a) Remove the X
engine
Ref. AMM TASK
71-00-51-000-802
.
(b) Do a detailed X
inspection of the
forward and rear
engine mounts for
cracks or
distortion
(dimensional and
Non-Destructive
Test
(NDT)
inspection).
(c) Contact X
Airbus.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 94 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
E. (1) Install access X
panels
471AL, 471CL,
482AR and
482CR on the
pylon-on-wing
junction Ref.
AMM TASK
54-53-11-400-804
.
(2) Close the X
thrust-reverser
cowl
doors and the fan
cowl doors
Ref. AMM TASK
78-36-00-410-802
and
Ref. AMM TASK
71-13-00-410-802
.

SUBTASK 05-51-11-210-095-H
I. Inspection of the Engine
Do the inspection of the engine after a hard landing, or a hard
overweight landing, or a severe hard landing or a severe hard
overweight landing Ref. AMM TASK 72-00-00-200-812.
SUBTASK 05-51-11-210-096-C
J. Inspection of the Wing

NOTE: This inspection contains two inspection procedures:

- Item 1. Inspection after a hard landing or a hard
overweight landing
- Item 2. Inspection after a severe hard landing or a
severe hard overweight landing.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 95 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

If you know the category of the landing, go directly to the

necessary inspection.
If you do not know the category, go directly to item 2.
Inspection after a severe hard landing or a severe hard
overweight-landing.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
wing after a
hard landing or a
hard overweight
landing

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 96 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. Examine the wing X
top skin from RIB
1
to RIB 10 and
from RIB 18 to
RIB 20,
the shroud panel
and its
attachment.
Make sure that:
- There is no
distortion
- There are no
cracks
- The paint and
the sealant are
not
damaged
- The fasteners
are in the correct
condition.
Carefully examine
the fasteners at
the rear spar
between RIB 3
and
RIB 6 and the
gear rib.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 97 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Do an inspection X
of the wing
bottom
skin. Carefully
examine the
areas
adjacent to:
- The flap beams
- The engine
pylon
- The MLG
attachments
- The shroud-box
outboard seal and
the seal support.
Make sure that:
- There is no
distortion
- There are no
cracks
- There are no
fluid leaks
- The paint and
the sealant are
not
damaged
- The fasteners
are in the correct
condition.
Carefully examine
the fasteners at
the rear spar
between RIB 3
and
RIB 6 and the
gear rib.
If there are signs
of damage on the

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 98 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
wing top or
bottom skins.
(1) Defuel the X
wing
Ref. AMM TASK
28-25-00-650-001
.
(2) Get access to X
the area adjacent
to
the damage
Ref. AMM TASK
28-10-00-910-002
.
(3) Do an internal X
inspection of:
- The applicable
ribs, the front
and rear spars,
the top and
bottom skins, the
stringers,
the riblets, the
brackets and
the plates.
C. Do a visual X
inspection of the
slat 1
outboard end
area for bent,
buckling
or distortion.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 99 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
2. Inspection of the
wing after a
a severe hard
landing or a
severe
hard overweight-
landing
A. Do the inspection X
of the wing after a
hard landing or a
hard overweight
landing (Ref. item
1).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 100 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Do an inspection X
of the front and
rear
spars.
Examine:
- The front spar at
the forward pylon
attachment-area
- The rear-spar
aft face between
RIBS
6 and 9 and the
area between
RIBS 7
and 8 and the aft
pylon attachment-
fitting
- The inner rear
spar at the MLG
attachment
fittings
- The shroud box.
Make sure that:
- There are no
cracks
- There is no
damage
- The paint and
the sealant are
not
damaged
- There are no
fluid leaks
- The fasteners
and safety
devices are
in the correct
condition.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 101 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
If there are signs
of damage on the
front and rear
spars:
(1) Defuel the X
wing
Ref. AMM TASK
28-25-00-650-001
.
(2) Get access to X
the wing area
adjacent to the
damage
Ref. AMM TASK
28-10-00-910-002
.
(3) Do an internal X
inspection of all
the ribs, riblets,
stringers,
brackets and
plates.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 102 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(4) Do an X
inspection of all
the pipes,
hoses, electrical
looms and
raceways.
Make sure that:
- There are no
cracks
- There is no
damage
- The paint and
the sealant are
not damaged
- The fasteners
are in the correct
condition.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 103 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
If there are X
indications of
damage on
the rear spar:
(1) Do an
inspection of
these items:
- The top
diagonal stiffener
- The MLG
attachment
- The top edge
beam
- The MLG pintle
fitting
- The MLG
actuator fitting
- The sidestay
attachment fitting
- The MLG
support rib
- The riblets,
stringers and
brackets.
Make sure that:
- There are no
cracks
- There is no
damage
- The paint and
the sealant are
not
damaged
- The fasteners
are in the correct
condition.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 104 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Close access to
the wing tanks
Ref. AMM TASK
28-10-00-910-002
.

** ON A/C FSN 011-011, 101-137

PRE SB 31-1526 for A/C 101-137
SUBTASK 05-51-11-210-097-A
K. Inspection of the Flaps

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
flaps
A. Do a visual X
inspection of the
upper
and lower
surfaces of the
inner and
outer flaps for
distortion.
B. Do fully the X
operational test of
the
flap system
Ref. AMM TASK
27-54-00-710-001
.
If there are
indications of
damage:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 105 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Do the X
detailed visual
inspection
of the
transmission
assembly
Ref. AMM TASK
27-54-00-200-001
.
(2) Do the X
detailed
inspection of the
flap attachment
parts (drive arms
and brackets).

SUBTASK 05-51-11-210-100-A
L. Inspection of the Fuselage

NOTE: This inspection contains two inspection procedures:

** ON A/C FSN 011-011, 101-137
Ref. Fig. Lower Part of the Center Fuselage
Ref. Fig. Center Section
Ref. Fig. Component Location in the Belly Fairing Structure
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137
- Item 1. Inspection after a hard landing or a hard
overweight landing
- Item 2. Inspection after a severe hard landing or a
severe hard overweight landing.
If you know the category of the landing, go directly to the
necessary inspection.
If you do not know the category, go directly to item 2.
Inspection after a hard landing or a severe hard overweight
landing.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 106 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of
the fuselage
after
a hard
landing or a
hard
overweight
landing
A. Fuselage
section
between
FR20 and
FR35:
- From the X
ground,
examine the
lower
skin for loose
fasteners,
cracked
or flaking
paint or
distortion.
B. Fuselage
section
between
FR35 and
FR47:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 107 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
- Examine X
the belly
fairing panels
for loose
fasteners,
cracked or
flaking paint,
incorrect
attachment
or
delamination.
If you find
damage:
(1) Remove X
the panels
and examine
internally the
belly fairing
for:
- The correct
attachment of
all
the
components
or loose
rivets.
(2) Examine X
the fuselage
skin
externally
below the
belly fairing
zone for:
- Buckling,
loose rivets,
cracked
or flaking
paint.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 108 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
- Examine X
the operation
of Overwing
door (OWD)
for jamming
or distortion.
Examine all
corners of
the door
surround
structure, the
x-stops
and the
hinges for
loose
fasteners,
cracked or
flaking paint,
incorrect
attachment
or distortion.
C. Fuselage X
section
between
FR47 and
FR70:
- From the
ground,
examine the
lower
skin for loose
fasteners,
cracked
or flaking
paint or
distortion.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 109 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
2. Inspection of
the fuselage
after a
severe hard
landing or a
severe hard
overweight
landing
A. Do the X
inspection of
the fuselage
after
a hard
landing or a
hard
overweight
landing (Ref.
item 1.)
B. Examine the X
keel beam
connections
to
the fuselage
under
forward
cargo
compartment
at frame 35
and under aft
cargo
compartment
at frame
46/47 for
distortion and
cracks.

SUBTASK 05-51-11-210-099-A
M. Inspection of the Tail Area

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 110 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

** ON A/C FSN 011-011, 101-137

Ref. Fig. Main Structure of the Cone/Rear Fuselage
** ON A/C FSN 011-011, 101-137
PRE SB 31-1526 for A/C 101-137

NOTE: This inspection contains two inspection procedures:

- Item 1. Inspection after a hard landing or a hard
overweight landing
- Item 2. Inspection after a severe hard landing or a
severe hard overweight landing.
If you know the category of the landing, go directly to the
necessary inspection.
If you do not know the category, go directly to item 2.
Inspection after a severe hard landing or a severe hard
overweight landing.
Ref. AMM TASK 27-44-00-710-002 Ref. AMM TASK 55-16-00-200-001
Ref. AMM TASK 55-36-00-210-001 Ref. AMM TASK 55-30-00-200-001
Ref. AMM TASK 55-10-00-210-001 Ref. AMM TASK 27-24-00-710-001
Ref. AMM TASK 27-34-00-710-001

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
tail area after
a hard landing or
a hard overweight
landing
A. Do the X
operational test of
the THS
Ref. AMM TASK
27-44-00-710-002
If you find
unsatisfactory
condition(s):

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 111 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Do a general X
visual inspection
of:
- the attachment
areas of the
horizontal
stabilizer
Ref. AMM TASK
55-16-00-200-001
- the attachment
areas of the
vertical stabilizer
Ref. AMM TASK
55-36-00-210-001
If you find
damage:
(a) Do a detailed X
visual inspection
of the vertical
stabilizer
center box
Ref. AMM TASK
55-30-00-200-001
(b) Do a visual X
inspection of the
THS sparbox
Ref. AMM TASK
55-10-00-210-001

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 112 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
B. Do the X
operational test of
the rudder
and the elevators
Ref. AMM TASK
27-24-00-710-001
Ref. AMM TASK
27-34-00-710-001
If you find
unsatisfactory
condition(s):
(1) Examine the X
hinges of the
elevators
and the rudder for
cracks
2. Inspection of the
tail area after a
severe hard
landing or a
severe hard
overweight
landing
A. Do the inspection X
of the tail area
after a hard
landing or a hard
overweight
landing (Ref. item
1.)
B. Do a general X
inspection of the
APU
compartment for
leaks.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 113 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Examine the APU X
for correct
installation.
Examine the
mountings for
damage,
distortion and
signs of
movement.
D. Examine the X
container
brackets and the
container of the
APU fire
extinguisher
for damage,
condition and
correct
installation.

SUBTASK 05-51-11-210-098-A
N. Inspection of the Avionics compartment

NOTE: This inspection is necessary only for a severe hard landing

or a severe hard overweight landing.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of
the avionics
Compartment

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 114 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. Examine the X
attachments
of rack 80VU
and 90VU.
B. Examine the X
vertical rods
above the
NLG bay
between
FR12 and
FR20.

SUBTASK 05-51-11-210-101-A
P. Inspection of the Water tanks

NOTE: This inspection is necessary only for a severe hard landing

or a severe hard overweight landing

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of
the water
tanks
A. Examine the X
tanks for
correct
attachment
and signs of
leaks.

SUBTASK 05-51-11-210-102-A
Q. Inspection of the Cockpit and Cabin Equipment/Furnishings, the Cargo
Compartments and the Emergency Locator Transmitter (ELT)

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 115 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

NOTE: This inspection is necessary only for a severe hard landing

or a severe hard overweight-landing.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
cockpit and cabin
equipment/
furnishings

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 116 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. Do a visual check X
for disconnected
parts, integrity of
the latches and
other damage on
the equipment/
furnishings. This
includes:
-The crew seats
and the Cabin
Attendant Seat
(CAS)
-The passenger
seats with the in-
flight
entertainment
devices
-The partitions
-The sidewall,
decompression
and ceiling panels
in the cockpit and
cabin
-The cockpit and
cabin stowages
-The buffet/
galleys
-The lavatories
-The emergency
equipment
-The oxygen-
mask stowage
boxes.
If you find
damage:

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 117 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) On the X
passenger
seat(s), do a
detailed
inspection of the
damaged
passenger seat(s)
Ref. AMM TASK
25-21-00-210-001
.
(2) On the cockpit X
seats, do a visual
inspection of the
cockpit seats Ref.
AMM TASK
25-11-00-200-001
.
(3) On the CAS, X
do a detailed
inspection of the
CAS Ref. AMM
TASK
25-22-00-210-001
.
(4) On the X
oxygen-mask
stowage boxes,
do an operational
test of the manual
mask release
Ref. AMM TASK
35-23-00-710-001
or Ref. AMM
TASK
35-23-00-710-005
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 118 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(5) On other X
equipment/
furnishing,
contact airbus
before return-to-
service.
2. Inspection of the
cargo
compartments
A. Do a general
visual inspection
of the forward, aft
and bulk cargo
compartments:
(1) Examine the X
linings, floor
panels, sealing
strips, protection
plates, center line
cover-plates,
access doors,
decompression
panels and
pressure valve
Ref. AMM TASK
25-50-00-200-002
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 119 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(2) If installed, X
examine the
loading and
unloading
systems of the
containers/
pallets.
In the forward
and aft cargo
compartments,
examine the side
guides, pallet
locks and rollers
(ball units, roller
assemblies, drive
units, guide
latches and
tracks) for:
- Cracks,
missing
fasteners,
deformatio
n,
misalignme
nt and
dents.
Make sure that
they move freely.
(3) Examine the X
cargo restraint
system, door
nets, divider nets
and net
attachment
points.
3. ELT

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 120 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(1) Automatic ELT
(if installed)
(a) Make sure X
that the automatic
ELT is not in
automatic
transmission
mode.
(b) In the cockpit, X
on the overhead
panel, on the
remote control
panel
(111MX), make
sure that the
RED indicator is
off.
If the RED X
indicator is on:
- Immediately set
the ELT switch
to TEST/RESET
position (or push
the TEST/RESET
pushbutton) until
the RED indicator
goes off, to
stop the
transmission.
Then,
release the ELT
switch (or
TEST/RESET
pushbutton
switch).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 121 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(c) In the aft X
cabin, make sure
that
the ELT buzzer
does not operate.
If the buzzer X
operates:
- Remove the
ELT access panel
- Set the ELT
switch to OFF or
ARMED to stop
the transmission.
(2) Survival ELT
(if installed)
(a) Make sure X
that the survival
ELT is
in the correct
condition and
installed correctly.
(b) Make sure X
that the switch of
the
survival ELT did
not move to the
ON position (for
an ELT that has a
switch).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 122 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
If the ELT switch X
is at ON:
- Set the ELT
switch back to
OFF
or ARMED, as
necessary.
(refer to local
regulations).

SUBTASK 05-51-11-210-149-A
R. Inspection of the Rear Fuselage and the Vertical Tail Plane (VTP)
You must do this inspection only if the landing that occurred was a drift
landing.

NOTE: The inspection of the rear fuselage and VTP is not

necessary after a landing that was not a drift landing.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
1. Inspection of the
tail area after a
drift landing.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 123 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
A. Do a detailed ** ON A/
visual inspection C FSN
(DVI) 011-011,
for distortion, 101-137
cracks, damaged
PRE SB
paintwork or
sealant and loose 31-1526
or for A/C
pulled fasteners 101-137
on the external
surface of the
rear fuselage:
** ON A/C FSN
011-011,
101-137
Ref. Fig.
Inspection Areas
of the Vertical Tail
Plane (VTP) after
a Drift Landing
(1) The external X
surface below the
fin-to-fuselage
fairings
Ref. AMM TASK
53-51-00-210-018
(2) The fin-to- X
fuselage FWD,
MID, and
AFT attach lugs
Ref. AMM TASK
53-51-00-210-012

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 124 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(3) The X
transverse load
rod attachments
Ref. AMM TASK
53-51-00-210-012
.
B. Do a detailed
visual inspection
(DVI)
for distortion,
cracks, damaged
paintwork or
sealant and loose
or
pulled fasteners
on the internal
surface of the
rear fuselage at
Zone 310:
(1) Between X
FR70 and FR74
above
stringers 19LH
and 19RH
Ref. AMM TASK
53-51-00-210-020
(2) All areas of X
FR77
Ref. AMM TASK
53-51-00-210-020
.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 125 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
C. Do a detailed ** ON A/
visual inspection C FSN
(DVI) 011-011,
for distortion, 101-137
cracks, damaged
PRE SB
paintwork or
sealant and loose 31-1526
or for A/C
pulled fasteners 101-137
on the vertical tail
plane (VTP):
** ON A/C FSN
011-011,
101-137
Ref. Fig.
Inspection Areas
of the Vertical Tail
Plane (VTP) after
a Drift Landing
(1) The attach- X
fitting areas (this
includes the load
introduction area
at the skin
panels)
Ref. AMM TASK
55-36-00-210-001
(2) The RIB1 X
lower surface
(3) The RIB2 X
upper and lower
surfaces,
from the
inspection holes
at the VTP
front and rear
spars

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 126 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
(4) Rudder hinge X
arms 1 to 7
Ref. AMM TASK
55-30-00-210-001
Ref. AMM TASK
55-30-00-210-002
(5) Actuator X
attach-fittings 1 to
3
Ref. AMM TASK
55-30-00-210-001
(6) The external X
surface of the
front
spar between
RIB1 and RIB2
(7) The external X
surface of the
front
spar between
RIB10 and RIB11
(8) The external X
surface of the
rear
spar between
RIB1 and RIB11.

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 127 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

INSP INSPECTION PHASE PHASE PHASE INSP REF.

ITEM
CODE TASKS 1 2 3 SIGN FIG.
D. Do a detailed ** ON A/
visual inspection C FSN
(DVI) 011-011,
for distortion, 101-137
cracks, damaged
PRE SB
paintwork or
sealant and loose 31-1526
or for A/C
pulled fasteners 101-137
on the rudder:
** ON A/C FSN
011-011,
101-137
Ref. Fig. Rudder
and Actuator
Attach-Fittings
(1) Rudder X
attach-fittings 1 to
7
Ref. AMM TASK
55-40-00-210-004
Ref. AMM TASK
55-40-00-210-005
(2) Actuator X
attach-fittings 1 to
3
Ref. AMM TASK
55-40-00-210-004
.

5. Close-up

SUBTASK 05-51-11-410-055-A
A. Special Closing of Access After a Drift Landing Inspection

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 128 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

(1) Make sure that the work area is clean and clear of tools and
other items.
(2) Close the trailing-edge access panels of the vertical stabilizer
Ref. AMM TASK 55-33-13-410-002.
(3) Install leading-edge access panels 322AL and 322CL of the
vertical stabilizer Ref. AMM TASK 55-32-11-400-001.
(4) Install rudder fairings 325AL and 325AR Ref. AMM TASK
53-55-12-400-001.
(5) Install dorsal fin 321AL Ref. AMM TASK 53-45-11-400-001.
(6) Install vertical stabilizer fairings 323AL and 323AR Ref. AMM
TASK 53-55-11-400-001.
(7) Close access door 312AR.
(8) Remove the ACCESS PLATFORM 12M (40 FT) -
ADJUSTABLE in position at Zone 320.
(9) Remove the WARNING NOTICE(S).

SUBTASK 05-51-11-410-051-A
B. Close Access
(1) Make sure that the work area is clean and clear of tools and
other items.
(2) Fully retract the Flaps Ref. AMM TASK 27-50-00-866-009
(3) Fully retract the Slats Ref. AMM TASK 27-80-00-866-005
(4) Fully retract the Spoilers Ref. AMM TASK 27-60-00-866-002
(5) Close the access doors and panels opened during the
inspection.
(6) Close the nose gear doors Ref. AMM TASK 32-22-00-410-001.
(7) Close the main gear doors Ref. AMM TASK 32-12-00-410-001.
(8) Remove the access platform(s).
(9) Remove the WARNING NOTICE(S).

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 129 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-03400-00-A (SHEET 1) - Flow Chart for the Aircraft with Enhanced
DMU/FDIMU
** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 130 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-03500-00-A (SHEET 1) - Hard landing or a Hard Overweight landing

Category for Aircraft with Enhanced DMU/FDIMU
** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 131 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-04000-00-A (SHEET 1) - Nose Landing-Gear Leg

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 132 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-01000-00-A (SHEET 1) - Nose Landing Gear

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 133 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-02300-00-A (SHEET 1) - Main Landing-Gear Leg

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 134 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-02400-00-A (SHEET 1) - Illustration of the Main Landing Gear

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 135 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A A

Figure 05-51-11-991-02600-00-A (SHEET 1) - Fan Cowl Doors: Hinge and Latch Fittings
** ON A/C FSN 011-100
EMB SB 31-1524 for A/C 012-018

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 136 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A
A

Figure 05-51-11-991-02700-00-A (SHEET 1) - Thrust Reverser: Hinge Fittings

** ON A/C FSN 011-100
EMB SB 31-1524 for A/C 012-018

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 137 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

B
A

A
D

Figure 05-51-11-991-02800-00-A (SHEET 1/3) - Thrust Reverser: Latch Fittings

** ON A/C FSN 011-100
EMB SB 31-1524 for A/C 012-018

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 138 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

C D

Figure 05-51-11-991-02800-00-A (SHEET 2/3) - Thrust Reverser: Latch Fittings

** ON A/C FSN 011-100
EMB SB 31-1524 for A/C 012-018

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 139 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-02800-00-A (SHEET 3/3) - Thrust Reverser: Latch Fittings

** ON A/C FSN 011-100
EMB SB 31-1524 for A/C 012-018

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 140 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-02900-00-A (SHEET 1) - Exhaust Nozzle: Engine Interface

** ON A/C FSN 011-100
EMB SB 31-1524 for A/C 012-018

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 141 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-02500-00-B (SHEET 1) - Inlet Cowl: Engine Interface and Rear

Bulkhead
** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 142 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-03800-00-A (SHEET 1/2) - Inspection of the Nacelle

** ON A/C FSN 101-200

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 143 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-03800-00-A (SHEET 2/2) - Inspection of the Nacelle

** ON A/C FSN 101-200

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 144 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-03900-00-A (SHEET 1) - Inspection of the V-blade

** ON A/C FSN 101-200

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 145 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A
B
A

Figure 05-51-11-991-00700-00-A (SHEET 1) - Primary Structure

** ON A/C FSN 011-100

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 146 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

B C
A
A

Figure 05-51-11-991-00800-00-A (SHEET 1) - Pylon-to-Engine Attach Fittings and Engine

Mounts
** ON A/C FSN 011-100

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 147 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

C
B
A

Figure 05-51-11-991-00900-00-A (SHEET 1) - Pylon-to-Wing Attach Fittings

** ON A/C FSN 011-100

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 148 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-00700-00-B (SHEET 1) - Primary Structure

** ON A/C FSN 101-200

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 149 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

B
A
A

C
D

C
D

Figure 05-51-11-991-00800-00-C (SHEET 1) - Engine-to-Pylon Attach Fittings

** ON A/C FSN 101-200

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 150 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A
C

A B

A C

B
A C

B
C

Figure 05-51-11-991-00900-00-C (SHEET 1/2) - Pylon-to-Wing Attach Fittings

** ON A/C FSN 101-200

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 151 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A A

B B C C

Figure 05-51-11-991-00900-00-C (SHEET 2/2) - Pylon-to-Wing Attach Fittings

** ON A/C FSN 101-200

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 152 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-05300-00-A (SHEET 1) - MLG Forward Lug Area

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 153 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A
B

Figure 05-51-11-991-01200-00-A (SHEET 1) - Lower Part of the Center Fuselage

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 154 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-01300-00-A (SHEET 1) - Center Section

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 155 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-01400-00-A (SHEET 1) - Component Location in the Belly Fairing

Structure
** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 156 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A
B

Figure 05-51-11-991-01100-00-A (SHEET 1) - Main Structure of the Cone/Rear Fuselage

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 157 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-03200-00-A (SHEET 1) - Inspection Areas of the Vertical Tail Plane

(VTP) after a Drift Landing
** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 158 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

A
B

Figure 05-51-11-991-03300-00-A (SHEET 1/2) - Rudder and Actuator Attach-Fittings

** ON A/C FSN ALL

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 159 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
 REV DATE: Aug
JOB CARD
01/2021
AMM - GOW - A318/A319/A320/A321 TASK:
05-51-11-200-004-B
TITLE: 05-51-11-06 CONF 00
Tail Number - MSN -
FSN: 05-51-11-200-004-B - Inspections After a Hard Landing or a
ALL Hard Overweight Landing for Aircraft with Enhanced DMU/
FDIMU Load Report 15

MECH. INSP.

Figure 05-51-11-991-03300-00-A (SHEET 2/2) - Rudder and Actuator Attach-Fittings

** ON A/C FSN ALL
© *** END OF CARD ***

JCP Title: Inspections After a CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 160 of 160
Hard Landing or a Hard PRINT DATE: Aug 10/2021
Overweight Landing for Aircraft CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
with Enhanced DMU/FDIMU COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
Load Report 15 THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE