Scribd
Upload
199 views2 pages

Safety Information Notice: Subject: Tail Rotor Reminder of The Dedicated Maintenance For The Tail Rotor Trailing Edge Tab

This document provides a safety notice about performing dedicated maintenance on the tail rotor trailing edge tab for various Airbus helicopter models. It reminds technicians to check for cracks during inspections and lists the applicable maintenance documents.

Uploaded by

Bruno Alonso Pacheco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
199 views2 pages

Safety Information Notice: Subject: Tail Rotor Reminder of The Dedicated Maintenance For The Tail Rotor Trailing Edge Tab

This document provides a safety notice about performing dedicated maintenance on the tail rotor trailing edge tab for various Airbus helicopter models. It reminds technicians to check for cracks during inspections and lists the applicable maintenance documents.

Uploaded by

Bruno Alonso Pacheco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

N° 3063-S-64

SAFETY INFORMATION NOTICE


SUBJECT: TAIL ROTOR

Reminder of the dedicated maintenance for the tail rotor trailing edge tab

For the attention of

AIRCRAFT Version(s)
CONCERNED Civil Military
AS350 B, BA, BB, B1, B2, B3, D L1
AS550 A2, C2, C3, U2
AS355 E, F, F1, F2, N, NP
AS555 AF, AN, SN, UF, UN

Airbus Helicopters has been informed of a skin crack found on a Tail Rotor Blade P/N 355A120050.04. The crack
originated from the root end of the trailing edge tab and propagated in the chord direction. The damage was felt by
the pilot due to vibrations in the flight controls, and landing was performed successfully.

Pending the investigation results, Airbus Helicopters reminds you of the Maintenance Program currently applicable
to this component during the P inspection (periodicity: 10 flight hours without exceeding 7 days), for the following
Part Numbers:
PN 355A120031.01 / .02/ .03/ .04/ .05/ .06/ .07/ .08/ .09/ .11/ .12/ .13/ .14,
PN 355A120040.00 / .01/ .02/ .03/ .04/ .05/ .06/ .07/ .08/ .10,
PN 355A120041.00 / .01/ .02/ .03/ .04/ .05/ .06/ .07/ .08/ .09/ .10/ .11/ .12/ .13,
PN 355A120050.00 / .01/ .02/ .03/ .04/ .05/ .06/ .07/ .08/ .09,
PN 355A120051.00 / .01/ .02/ .03/ .04/ .05/ .06/ .07/ .08/ .09.

Please note that Tail Rotor Blades with integrated trailing edge tab are NOT concerned by this reminder. Do not
take this reminder into account for the following Part Numbers:
PN 355A120040.14 / .15,
PN 355A120041.14 / .15,
PN 355A120050.10 / .11/ .12/ .13/ .14/ .15,
PN 355A120051.10 / .11/ .12/ .13/ .14/ .15,
PN 355A120060.00 / .01/ .02/ .03/ .04/ .05.

According to your helicopter version, please find in the table below the correspondence between ASB reference,
MSM chapter concerned & associated task and AMM task to be complied with on your material. Check whether the
Part Number of your tail rotor blades is concerned and then carry out the dedicated maintenance according to the
technical documents.

Revision 0 2016-07-29 Page 1/2


This document is available on the internet: www.airbushelicopters.com/techpub
N° 3063-S-64

Table - A/C versions with ASB, MSM and AMM references

Revision 0 2016-07-29 Page 2/2


This document is available on the internet: www.airbushelicopters.com/techpub

You might also like