SUBMERSIBLE PUMP

FLOW RATE : 63 GPM @ HEAD : 9 M

Pump Performance Data:

Pump Type : Submersible sump pump with built in float switch

Brand / Origin : PEDROLLO / ITALY

Model : Dm 30

Operating Flow Rate : 63 gpm

Operating head :9M

Pump Outlet : 1.5 “

Speed : 3450 RPM

Motor Power : 1.5 HP/ 1 phase / 220 V / 60HZ

With thermal overload protection at the motor winding

Pump Construction:

Pump Casing : Cast Iron epoxy coated

Motor Casing : Stainless Steel

Impeller : Techno polymer open impeller

Pump Shaft : Stainless Steel

Sealing : Mechanical Seal

ABDULLAH S. AL-JARED TRADING LTD CO

Tel: +966 2 665 7545 +966 2 6451 451 Fax: +966 2 665 5757
E-mail: [email protected]
Website: aljared.com.sa P.O. Box 6357 , Jeddah 21441
EN

W
NE

D
60 Hz
Submersible drainage pumps Clear water

INSTALLATION AND USE

NEW Designed to pump clear or slightly dirty water, these pumps are
suitable for use in domestic, civil and professional applications and
New version of the D series, made more reliable in particular for draining flooded areas such as cellars and garages,
for draining swimming pools and reservoirs and for the disposal of
with the introduction of double mechanical seals.
non-sewage waste water.
These pumps distinguish themselves for their reliability, which can
TECHNICAL CHARACTERISTICS be best appreciated under automatic operating conditions in fixed
u Double mechanical seals. installations.
u Cast iron pump body subjected to Epoxy
APPLICATION LIMITS
Electrocoating Treatment. This treatment • 5 m maximum immersion depth
guarantees high resistance to oxidation. •• Maximum liquid temperature +40 °C
u Precision cast stainless steel handle. •• Solids passage up to Ø 10 mm
u Float switch equipped with patented tilting
STANDARD SUPPLY
system (patented). •• Complete with:
u Supply cable equipped with anti-tear system – 5 m long power cable for D8-N, D10-N, D18-N, D20-N
(patented) – 10 m long power cable for D30-N
•• Float switch for single-phase versions

CHARACTERISTIC CURVES AND PERFORMANCE DATA 60 Hz  n= 3450 1/min

0 10 20 30 40 50 60 70 80 US g.p.m.
0 10 20 30 40 50 60 Imp g.p.m.
28 feet

26 D30-N

80
24

22
70
D20-N
20
60
18
Head H (metres) 4

D18-N
16
D10-N 50
14
D8-N 40
12

10
30
8

6 20

4
10
2

0 0
0 25 50 75 100 125 150 175 200 225 250 275 300 l/min
0 1

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 m³/h
Flow rate Q 4

MODEL POWER m³/h 0 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.2 15.0 16.5 18.0
Q
Single-phase Three-phase kW HP l/min 0 25 50 75 100 125 150 175 200 220 250 275 300

Dm 8 -N – 0.55 0.75 13 12.5 11.8 11 10.2 9.2 8.2 7 5.8 4.7 3

Dm 10 -N D 10 -N 0.75 1 16 15.5 14.8 14 13.2 12.2 11.2 10 8.8 7.8 6 4.5 3

Dm 18 -N – 0.55 0.75 H metres 16 16 15 13.7 12.5 11 9.5 8 6.5 5

Dm 20 -N D 20 -N 0.75 1 20 20 19 18 16.8 15.5 13.9 12.3 10.7 9.2 7

Dm 30 -N D 30 -N 1.1 1.5 26 26 24.8 23.5 22 20.4 18.7 16.9 15 13.5 11 9

Q = Flow rate H = Total manometric head Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3.
 Domestic use Civil use

POS. COMPONENT CONSTRUCTION CHARACTERISTICS

Cast iron subjected to Epoxy Electrocoating Treatment,
1 PUMP BODY
with threaded port in compliance with ISO 228/1
2 SUCTION FILTER Stainless steel AISI 304
12
3 SUCTION PLATE Stainless steel AISI 304
4 IMPELLER Technopolymer open type
5 MOTOR CASING Stainless steel AISI 304
6 MOTOR CASING PLATE Stainless steel AISI 304
7 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104
8 SHAFT WITH DOUBLE MECHANICAL SEAL SEPARATED BY AN OIL CHAMBER
10
Pump Seal Shaft Materials
Model Model Diameter Stationary ring Rotational ring Elastomer
9
Dm8 -N, Dm10 -N Silicon Silicon
MG1-14D SIC Ø 14 mm NBR
Dm18 -N, Dm20 -N carbide carbide
5
Silicon
D30-N MG1-14 SIC Ø 14 mm Ceramic NBR
carbide 11
(Shaft with double seal with lip seal Ø 16 x Ø 24 x H 5 mm)
9 BEARINGS 6203 ZZ / 6203 ZZ 7 13
10 CAPACITOR
9
Pump Capacità
Single-phase (220 V) (110 V or 127 V) 6
Dm8-N, Dm10-N, Dm18-N, Dm20-N 20 μF 450 VL 30 μF 250 VL
Dm30 25 μF 450 VL –
11 ELECTRIC MOTOR
– Single-phase 220 V - 60 Hz with thermal overload protector built-in to the winding
– Three-phase 220/380 V - 60 Hz or 220/440 V - 60 Hz
– Insulation: F class 1 2 8 4 3
– Protection: IP X8
12 POWER CABLE
5 metre (10 metre for D30-N) long “H07 RN-F” cable
(with Schuko plug on single-phase versions only)
13 FLOAT SWITCH
(only for single-phase versions)

DIMENSIONS
Typical installation

a
p (minimum)
h

DN
e
h1

c b
(minimum)

MODEL PORT DIMENSIONS mm

Single-phase Three-phase DN a b c h h1 d e p
Dm 8 -N –
Dm 10 -N D 10-N
85 340 72 17
Dm 18 -N – 1½” 115 147 variable 500 500
Dm 20 -N D 20-N
Dm 30 -N D 30-N 93 355 84 15