Scribd
Upload
187 views2 pages

Solar Microinverter Technology: Leading The Industry in

The document discusses a new microinverter called the DS3D from APsystems. It has 2 independent MPPT inputs, a maximum continuous output power of 2000W, and connects up to 4 modules in a single unit. It also features safety protection, arc fault protection, and advanced monitoring systems for maximum efficiency.

Uploaded by

Laura Garcia Reyes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
187 views2 pages

Solar Microinverter Technology: Leading The Industry in

The document discusses a new microinverter called the DS3D from APsystems. It has 2 independent MPPT inputs, a maximum continuous output power of 2000W, and connects up to 4 modules in a single unit. It also features safety protection, arc fault protection, and advanced monitoring systems for maximum efficiency.

Uploaded by

Laura Garcia Reyes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Leading the Industry in

Solar Microinverter Technology

DS3D
 2 input channels with independent
MPPT and monitoring function
 Single unit connects to four modules
 Maximum continuous output power
up to 2000W
 Safety protection relay integrated
 Arc fault protection function
embedded.

DIMENSIONS

Our flagship new range of Grid-tied microinverters


includes the new DS3D. The APsystems DS3D is a
grid-tied microinverter with intelligent networking
and advanced monitoring systems to ensure
maximum efficiency. High efficiency, high reliability
of the DS3D with 2 independent MPPT inputs,
maximum continuous output power up to 2000W.
Quarter the inverters and quarter the installation
means real cost savings for residential and
commercial customers.

WIRING SCHEMATIC

2021/08/20 Rev1.0
DS3D Microinverter Datasheet
Region LATAM
Input Data (DC)
Recommended PV Module Power (STC) Range 315Wp-670Wp+
Peak Power Tracking Voltage 68V-110V
Operation Voltage Range 60V-120V
Maximum Input Voltage 120V
Maximum Input Current 20A x 2
Output Data (AC)
Maximum Continous Output Power 2000W
Nominal Output Voltage/Range* 240V/ 211V-264V
Adjustable Output Voltage Range 170V-278V
Nominal Output Current 8.3A
Nominal Output Frequency/ Range* 60Hz/59.3Hz-60.5Hz
Adjustable Output Frequency Range 55Hz-65Hz
Maximum Units per Branch** 3
Efficiency
Peak Efficiency 97%
CEC Efficiency 96.7%
Nominal MPPT Efficiency 99.5%
Night Power Consumption 20mW
Mechanical Data
Operating Ambient Temperature Range -40 ℉ to +149 ℉ (-40 °C to +65 °C)
Storage Temperature Range -40 ℉ to +185 ℉ (-40 °C to +85 °C）
Dimensions (W x H x D) 11” × 9” × 2” (283mm X 233mm X 48.4mm)
Weight 8.4lbs(3.8kg)
DC Connector Type MC4
Cooling Natural Convection - No Fans
Enclosure Environmental Rating Type 6
Features
Communication (Inverter To ECU) Encrypted ZigBee
Transformer Design High Frequency Transformers, Galvanically Isolated
Energy Management Energy Management Analysis (EMA) system
Certificate & Compliance
Compliance UL1741 (IEEE1547);CSA C22.2 No. 107.1;NOM-001

*Nominal voltage/frequency range can be extended beyond nominal if required by the utility.
**Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.

Specifications subject to change without notice - please ensure you are


using the most recent update found at latam.APsystems.com
© All Rights Reserved

APsystems en Guadalajara:
AV. Lazaro Cardenas 2850-5o Piso, Colonia Jardines del Bosque C.P. 44520, Guadalajara, Jalisco
+52 (33) 3188 4604｜[email protected]

You might also like