Scribd
Upload
26 views1 page

Fluxofil M 10: FCAW/MCAW Cored Wires C-MN and Low-Alloy Steels

This document provides information about FLUXOFIL M 10, a seamless copper coated metal cored wire for flux cored arc welding of C-Mn and low-alloy steels. The document outlines the wire's classification, chemical analysis, mechanical properties, materials compatibility, and packaging details.

Uploaded by

bvbarc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views1 page

Fluxofil M 10: FCAW/MCAW Cored Wires C-MN and Low-Alloy Steels

This document provides information about FLUXOFIL M 10, a seamless copper coated metal cored wire for flux cored arc welding of C-Mn and low-alloy steels. The document outlines the wire's classification, chemical analysis, mechanical properties, materials compatibility, and packaging details.

Uploaded by

bvbarc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FLUXOFIL M 10

FCAW/MCAW Cored Wires


C-Mn and low-alloy steels
FLUXOFIL M10 is a seamless copper coated metal cored wire with outstanding welding properties in the short-arc
and spray-arc ranges depositing slag free weld metal. Almost spatter-free when welding in the spray-arc range.
Good restriking, even with a cold wire tip, thus being suitable for robotic applications. Characteristic features: good
side wall fusion, smooth and finely rippled welds without undercut into the base metal. Little formation of silicates
on top of weld, so that multi-pass welds can be made without inter-run cleaning. Due to an easily controllable weld
pool in the short-arc range, FLUXOFIL M 10 is well-suited for root- and positional welding.

Classification Approvals Grade


EN ISO 17632-A: T 46 4 M M 1 H5 ABS 4YSA H5
EN ISO 17632-B: T494T15-1MA-UH5 BV SA3Y M H5 KV40
AWS A5.18: E70C-6M H4 DB
AWS A5.36: E71T15-M21A4-CS1-H4 DNV IVY40MS H5
GL 4YH5S
LRS 4Y40S H5
TÜV

Chemical analysis (Typical values in %)


C Mn Si P S
0.08 1.5 0.4 0.010 0.010

All-weld metal Mechanical Properties


Yield Strength Tensile Strength Elongation Impact Energy ISO - V (J)
Heat Treatment
(MPa) (MPa) A5 (%) -40 °C
580°C x 2 h/furnace ≥ 460 550-680 ≥ 24 ≥ 80
As Welded ≥ 460 550-680 ≥ 24 ≥ 60
Gas test: 82% Ar+18% CO2

Shielding Gas - EN ISO 14175 : M21


Materials
S(P)235-S(P)460, GP240-GP280

Storage Current condition and welding position


Keep dry and avoid condensation DC+

PA PB PC PD PE PF PG

Packaging data
Packaging Type B300 DRUM
Diam(mm) / weight(kg) 16 200
1.0 W000281014
1.2 W000281017 W000281019
1.6 W000281022 W000281024

www.oerlikon-welding.com 1/1
Rev : 2019-06-26

You might also like